A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB Table View

A list of bridge entries.  A single entry exists in this 
list for each bridge managed by this agent.

a3ComSysBridgeEntry row .1.3.6.1.4.1.43.29.4.10.2.1

A bridge entry contains information about a particular
bridge managed by this agent.

Indexes

a3ComSysBridgeIndex

Column	Syntax	OID
a3ComSysBridgeIndexmandatory The index of the bridge identified by this entry, relative to this agent.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.2.1.1
a3ComSysBridgePortCountmandatory The number of bridge ports that the bridge identified by this entry controls.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.2
a3ComSysBridgeAddressTableSizemandatory The size of the address table for the bridge identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.3
a3ComSysBridgeAddressTableCountmandatory The current count of addresses in the address table for the bridge identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.4
a3ComSysBridgeAddressTablePeakCountmandatory The peak count of addresses in the address table for the bridge identified by this entry, since the system was last initialized.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.5
a3ComSysBridgeAddressThresholdmandatory A reporting threshold for the total number of addresses known for the bridge identified by this entry. When this threshold is reached, the event a3ComSysBridgeAddressThresholdEvent is generated. The range of valid…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.6
a3ComSysBridgeModemandatory The operational mode of the bridge identified by this entry. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set ope…	Enumerationr/w Enumerated Values: 1 expressMode 2 ieee8021dBridgeMode 3 notSupported 4 ieee8021dSRTBridgeMode 5 ieee8021dSRBridgeMode 6 ibmSRBridgeMode 7 srtBBridgeMode 8 srExpressBridgeMode	.1.3.6.1.4.1.43.29.4.10.2.1.7
a3ComSysBridgeBackbonePortmandatory The number of the port selected as the backbone segment port when the corresponding value of a3ComSysBridgeMode is is expressMode(1). The value of this object can range from 1 to the corresponding value of a3ComSysB…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.2.1.8
a3ComSysBridgeIpFragmentationEnabledmandatory A flag indicating whether or not IP fragmentation is enabled on this bridge. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid val…	Enumerationr/w Enumerated Values: 1 true 2 false 3 notSupported	.1.3.6.1.4.1.43.29.4.10.2.1.9
a3ComSysBridgeTrFddiTranslationModemandatory The mode used to describe whether the embedded MAC addresses are byte-conjugated in order to convert them from Token Ring format to native FDDI format (and vice versa), or whether they are left alone (used for traffi…	Enumerationr/w Enumerated Values: 1 native 2 backbone	.1.3.6.1.4.1.43.29.4.10.2.1.10
a3ComSysBridgeSTPGroupAddressmandatory Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled).	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.43.29.4.10.2.1.11
a3ComSysBridgeSTPEnablemandatory This object indicates if spanning tree bridge feature is enabled or disabled. If enabled this value will equal true(1).	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.43.29.4.10.2.1.12
a3ComSysBridgeIpxSnapTranslationEnablemandatory This object indicates if the IPX 802.3-FDDI SNAP Translation bridge feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supported on all bridges.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.43.29.4.10.2.1.13
a3ComSysBridgeLowLatencyEnablemandatory This object indicates if the bridge low latency feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supported on all bridges.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.43.29.4.10.2.1.14
a3ComSysBridgeVlanModemandatory This object indicates the VLAN types that this bridge will support. Open mode means that each VLAN within this bridge will be of the Open type; all VLANs within this bridge will share the same address table. Closed…	Enumerationr/w Enumerated Values: 1 open 2 closed 3 mixed 4 notSupported	.1.3.6.1.4.1.43.29.4.10.2.1.15
a3ComSysBridgeRateLimitReceiveMulticastmandatory This object limits the number of multicast frames forwarded by this port over a 1 second interval. The value is set across all ports on the device.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.2.1.16
a3ComSysBridgeRateLimitReceiveBroadcastmandatory This object limits the number of broadcast frames forwarded by this port over a 1 second interval. The value is set across all ports on the device.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.2.1.17
a3ComSysBridgeRateLimitReceiveFloodmandatory This object limits the number of frames forwarded that would normally be flooded by this port over a 1 second interval. The value is set across all ports on the device.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.2.1.18
a3ComSysBridgeAddressLearnModemandatory This object determins the behavior of address management normal(1) - The device will learn dynamic addresses and static entries can be added. secure(2) - Static, management, and…	Enumerationr/w Enumerated Values: 1 normal 2 secure	.1.3.6.1.4.1.43.29.4.10.2.1.19
a3ComSysBridgeAddressAgingIntervalmandatory This object determines how long (in seconds) a dynamic entry is kept in the database.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.2.1.20
a3ComSysBridgeLoopDetectModemandatory This object determines the behavior of loop detection enabled(1) - The DA will detect loops and disable the apporiate port. disabled(2) - No loop detection mechanism will be enabled. imm…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 immediate	.1.3.6.1.4.1.43.29.4.10.2.1.21
a3ComSysBridgeLoopDetectSrcAddressmandatory This object returns the source address that is used to determine if a loop is present between client ports	OctetString	.1.3.6.1.4.1.43.29.4.10.2.1.22

A list of bridge port entries.  A single entry exists in 
this list for each bridge port managed by this agent.

a3ComSysBridgePortEntry row .1.3.6.1.4.1.43.29.4.10.3.1

A bridge port entry contains information about a
particular bridge port managed by this agent.

Indexes

a3ComSysBridgePortBridgeIndex a3ComSysBridgePortIndex

Column	Syntax	OID
a3ComSysBridgePortBridgeIndexmandatory The index of the bridge identified by this entry, relative to this agent.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.3.1.1
a3ComSysBridgePortIndexmandatory The index of the bridge port identified by this entry, within the bridge identified by this entry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.3.1.2
a3ComSysBridgePortIfIndexmandatory The value of the MIB-II ifIndex corresponding to the bridge port identified by this entry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.3.1.3
a3ComSysBridgePortReceiveMulticastLimitmandatory This variable limits the number of multicast frames forwarded by this port over a 1 second interval. The minimum threshold limit may vary between platforms, but can be determined by multiplying this value by the swS…	Integer32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.43.29.4.10.3.1.4
a3ComSysBridgePortAddressActionmandatory This object, when read, always returns the value other(1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses …	Enumerationr/w Enumerated Values: 1 other 2 freezeAddress 3 flushAddress 4 flushDynamicAddress	.1.3.6.1.4.1.43.29.4.10.3.1.5
a3ComSysBridgePortSpanningTreeFrameReceivedCountsmandatory The number of spanning tree frames received by the bridge port identified by this entry.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.6
a3ComSysBridgePortReceiveBlockedDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because the receiving bridge port was not in the 'forwarding' state.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.7
a3ComSysBridgePortReceiveMulticastLimitExceededsmandatory The number of times the value of a3ComSysBridgePortReceiveMulticastLimit was exceeded for the port identified by this entry.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.8
a3ComSysBridgePortReceiveMulticastLimitExceededDiscardsmandatory The number of multicast/broadcast frames discarded by the bridge port identified by this entry because the corresponding value of a3ComSysBridgePortReceiveMulticastLimit was exceeded.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.9
a3ComSysBridgePortReceiveSecurityDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because they contained source addresses which were statically configured on another bridge port. A statically configured address (station), …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.10
a3ComSysBridgePortReceiveUnknownDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because the destination address was unknown. Note that this counter is only valid for backbone ports, and only when the bridge is operating …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.11
a3ComSysBridgePortReceiveOtherDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because they contained either invalid (group) source addresses or source addresses belonging to this bridge (indicative of network loops).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.12
a3ComSysBridgePortReceiveErrorDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because of internal bridge system errors (e.g., hardware and software address table discrepencies).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.13
a3ComSysBridgePortSameSegmentDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because the destination address is known on the same network segment as the source address, i.e., the frame does not need to be bridged.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.14
a3ComSysBridgePortTransmitBlockedDiscardsmandatory The number of frames discarded by the bridge port identified by this entry because the transmitting bridge port was not in the 'forwarding' state.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.15
a3ComSysBridgePortReceiveAllPathFilteredFramesmandatory The number of frames discarded by the bridge port identified by this entry due to user defined receive all path filters.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.16
a3ComSysBridgePortReceiveMulticastPathFilteredFramesmandatory The number of frames discarded by the bridge port identified by this entry due to user defined receive multicast path filters.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.17
a3ComSysBridgePortTransmitAllPathFilteredFramesmandatory The number of frames discarded by the bridge port identified by this entry due to user defined transmit all path filters.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.18
a3ComSysBridgePortTransmitMulticastPathFilteredFramesmandatory The number of frames discarded by the bridge port identified by this entry due to user defined transmit multicast path filters.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.19
a3ComSysBridgePortForwardedUnicastFramesmandatory The number of unicast frames which this port forwarded to a single destination port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.20
a3ComSysBridgePortForwardedUnicastOctetsmandatory The number of octets contained in unicast frames which this port forwarded to a single destination port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.21
a3ComSysBridgePortForwardedMulticastFramesmandatory The number of multicast frames which this port forwarded.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.22
a3ComSysBridgePortForwardedMulticastOctetsmandatory The number of octets contained in multicast frames which this port forwarded.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.23
a3ComSysBridgePortFloodedUnicastFramesmandatory The number of unicast frames which this port flooded to all other ports in the bridge.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.24
a3ComSysBridgePortFloodedUnicastOctetsmandatory The number of octets contained in unicast frames which this port flooded to all other ports in the bridge.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.25
a3ComSysBridgePortStpModemandatory The mode of the bridge port.	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 remove	.1.3.6.1.4.1.43.29.4.10.3.1.26
a3ComSysBridgePortReceiveMulticastLimitFrameTypemandatory This object identifies the frames type(s) that are to be counted when determining if the receive multicast limit has been exceeded for this bridge port. Devices attached to networks with predominantly high multicast…	Enumerationr/w Enumerated Values: 1 broadcastAndMulticast 2 broadcastOnly	.1.3.6.1.4.1.43.29.4.10.3.1.27
a3ComSysBridgePortForwardedFramesmandatory The number of frames which this port forwarded.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.28
a3ComSysBridgePortReceiveMulticastLimitMultipliermandatory This variable determines the minimum setting for the multicast limit threshold. For example if this value equals 1000, and the a3ComSysBridgePortReceiveMulticastLimit variable equals 2 then no more than 2000 multica…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.3.1.29
a3ComSysBridgePortRateLimitReceiveMulticastEnabledmandatory This object determines whether a port participates in multicast rate limiting set by the object a3ComSysBridgeRateLimitReceiveMulticast	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.43.29.4.10.3.1.30
a3ComSysBridgePortRateLimitReceiveBroadcastEnabledmandatory This object determines whether a port participates in broadcast rate limiting set by the object a3ComSysBridgeRateLimitReceiveBroadcast	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.43.29.4.10.3.1.31
a3ComSysBridgePortRateLimitReceiveFloodEnabledmandatory This object determines whether a port participates in flood rate limiting set by the object a3ComSysBridgeRateLimitReceiveFlood	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.43.29.4.10.3.1.32
a3ComSysBridgePortRateLimitReceiveStatemandatory This object returns the bmfrl state of the port enabled(1) - port is up disabled(2) - port is down, but not as a result of BMFRL bmfrl-disabled(3) - port was disabled by rate li…	Enumeration Enumerated Values: 1 enabled 2 disabled 3 bmfrl-disabled	.1.3.6.1.4.1.43.29.4.10.3.1.33
a3ComSysBridgePortLoopDetectStatemandatory This object returns a reason code that will indicate why a given port was disable by the Loop Detection software.	Enumeration Enumerated Values: 1 active 2 loopDetected 3 bpduDetected	.1.3.6.1.4.1.43.29.4.10.3.1.34
a3ComSysBridgePortAddressMaxLimitmandatory This object controls the maximum number of unicast addresses that can be learned or configured on a port. This value is set on a per port basis. The value can't be set lower than the current number of addresses on a p…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.3.1.35
a3ComSysBridgePortAddressStatemandatory This object returns a reason code that will indicate why a given port was disable, when a3ComDaAddressMode is set to secure.	Enumeration Enumerated Values: 1 active 2 limitationExceeded 3 securityViolation	.1.3.6.1.4.1.43.29.4.10.3.1.36
a3ComSysBridgePortReceiveInternalPathFilteredFramesmandatory The number of frames discarded by the bridge port identified by this entry due to receive internal path filters.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.29.4.10.3.1.37

A list of bridge port address information.  A single 
entry exists in this list for each learned address, 
accross all bridge ports and all bridges managed by this 
agent.

a3ComSysBridgePortAddressEntry row .1.3.6.1.4.1.43.29.4.10.5.1

An bridge port address entry contains information about a
particular bridge port address. To create a new entry,
set an instance of a3ComSysBridgePortAddressRemoteAddress with
the address index portion of the instan…

Indexes

a3ComSysBridgePortAddressBridgeIndex a3ComSysBridgePortAddressPortIndex a3ComSysBridgePortAddressIndex

Column	Syntax	OID
a3ComSysBridgePortAddressBridgeIndexmandatory The index of the bridge identified by this entry, relative to this agent.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.5.1.1
a3ComSysBridgePortAddressPortIndexmandatory The index of the bridge port identified by this entry, within the bridge identified by this entry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.5.1.2
a3ComSysBridgePortAddressIndexmandatory The index of this address entry within the bridge address table for the bridge identified by this entry. This index ranges from 1 to the corresponding value of a3ComSysBridgeAddressTableSize.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.43.29.4.10.5.1.3
a3ComSysBridgePortAddressRemoteAddressmandatory The remote MAC address detected on the bridge port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of a3ComSysBridgePortAddressIndex is det…	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.43.29.4.10.5.1.4
a3ComSysBridgePortAddressTypemandatory This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.43.29.4.10.5.1.5
a3ComSysBridgePortAddressIsStaticmandatory A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) is only valid for set operations.	Enumerationr/w Enumerated Values: 1 isStatic 2 isDynamic	.1.3.6.1.4.1.43.29.4.10.5.1.6
a3ComSysBridgePortAddressStaticPortmandatory If the corresponding value of the object a3ComSysBridgePortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by a3ComSysBridgePortLocalIndex) for which this address MAC w…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.5.1.7
a3ComSysBridgePortAddressAgemandatory This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge port identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.5.1.8

A list of vlan bridge port address information.  A single
entry exists in this list for each learned address,
across all vlan bridge ports and all vlan bridges managed
by this agent.

a3ComSysBridgeVlanPortAddressEntry row .1.3.6.1.4.1.43.29.4.10.8.1

A bridge vlan port address entry contains information about a
particular bridge vlan port address. To create a new entry,
set an instance of a3ComSysBridgeVlanPortAddressRemoteAddress with
the address index portion of …

Indexes

a3ComSysBridgeVlanPortAddressBridgeIndex a3ComSysBridgeVlanPortAddressVlanIndex a3ComSysBridgeVlanPortAddressPortIndex a3ComSysBridgeVlanPortAddressIndex

Column	Syntax	OID
a3ComSysBridgeVlanPortAddressBridgeIndexmandatory The index of the bridge vlan identified by this entry, relative to this agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.8.1.1
a3ComSysBridgeVlanPortAddressVlanIndexmandatory The index of the vlan identified by this entry, within the bridge identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.8.1.2
a3ComSysBridgeVlanPortAddressPortIndexmandatory The index of the bridge vlan port identified by this entry, within the bridge vlan identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.8.1.3
a3ComSysBridgeVlanPortAddressIndexmandatory The index of this address entry within the bridge vlan address table for the bridge identified by this entry. This index ranges from 1 to the corresponding value of a3ComSysBridgeAddressTableSize.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.8.1.4
a3ComSysBridgeVlanPortAddressRemoteAddressmandatory The remote MAC address detected on the bridge vlan port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of a3ComSysBridgeVlanPortAddressIndex …	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.43.29.4.10.8.1.5
a3ComSysBridgeVlanPortAddressTypemandatory This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.43.29.4.10.8.1.6
a3ComSysBridgeVlanPortAddressIsStaticmandatory A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) is only valid for set operations.	Enumerationr/w Enumerated Values: 1 isStatic 2 isDynamic	.1.3.6.1.4.1.43.29.4.10.8.1.7
a3ComSysBridgeVlanPortAddressStaticPortmandatory If the corresponding value of the object a3ComSysBridgeVlanPortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by a3ComSysBridgePortLocalIndex) for which this address MAC …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.8.1.8
a3ComSysBridgeVlanPortAddressAgemandatory This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge vlan port identified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.29.4.10.8.1.9