a3ComSysBridgeLoopDetectSrcAddress
A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB ·
.1.3.6.1.4.1.43.29.4.10.2.1.22
Object
column
mandatory
OctetString
This object returns the source address that is used to determine if a loop is present between client ports
Context
- MIB
- A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
- OID
.1.3.6.1.4.1.43.29.4.10.2.1.22- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- a3ComSysBridgeEntry
- Table
- a3ComSysBridgeTable
- Siblings
- 21
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3ComSysBridgeIndex mandatory The index of the bridge identified by this entry,
relative to this agent. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.1 |
| a3ComSysBridgeTrFddiTranslationMode mandatory The mode used to describe whether the embedded MAC
addresses are byte-conjugated in order to convert them
from Token Ring format to native FDDI format (and vice
versa), or whet… | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.10 |
| a3ComSysBridgeSTPGroupAddress mandatory Spanning tree bridge group address. The address cannot be
changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled). | column | OctetString | .1.3.6.1.4.1.43.29.4.10.2.1.11 |
| a3ComSysBridgeSTPEnable mandatory This object indicates if spanning tree bridge feature is
enabled or disabled. If enabled this value will equal true(1). | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.12 |
| a3ComSysBridgeIpxSnapTranslationEnable mandatory This object indicates if the IPX 802.3-FDDI SNAP Translation
bridge feature is enabled or disabled. If enabled this
value will equal true(1). Note, this object may not be
supp… | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.13 |
| a3ComSysBridgeLowLatencyEnable mandatory This object indicates if the bridge low latency
feature is enabled or disabled. If enabled this
value will equal true(1). Note, this object may not be
supported on all bridges. | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.14 |
| a3ComSysBridgeVlanMode mandatory This object indicates the VLAN types that this
bridge will support. Open mode means that each VLAN
within this bridge will be of the Open type; all VLANs
within this bridge wi… | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.15 |
| a3ComSysBridgeRateLimitReceiveMulticast mandatory This object limits the number of multicast frames forwarded
by this port over a 1 second interval. The value is set
across all ports on the device. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.16 |
| a3ComSysBridgeRateLimitReceiveBroadcast mandatory This object limits the number of broadcast frames forwarded
by this port over a 1 second interval. The value is set
across all ports on the device. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.17 |
| a3ComSysBridgeRateLimitReceiveFlood mandatory This object limits the number of frames forwarded that
would normally be flooded by this port over a 1 second
interval. The value is set across all ports on the device. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.18 |
| a3ComSysBridgeAddressLearnMode mandatory This object determins the behavior of address management
normal(1) - The device will learn dynamic addresses and
static entries can be added.
… | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.19 |
| a3ComSysBridgePortCount mandatory The number of bridge ports that the bridge identified by
this entry controls. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.2 |
| a3ComSysBridgeAddressAgingInterval mandatory This object determines how long (in seconds) a dynamic entry is kept
in the database. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.20 |
| a3ComSysBridgeLoopDetectMode mandatory This object determines the behavior of loop detection
enabled(1) - The DA will detect loops and disable
the apporiate port.
disabled(2) - No loop … | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.21 |
| a3ComSysBridgeAddressTableSize mandatory The size of the address table for the bridge identified
by this entry. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.3 |
| a3ComSysBridgeAddressTableCount mandatory The current count of addresses in the address table for
the bridge identified by this entry. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.4 |
| a3ComSysBridgeAddressTablePeakCount mandatory The peak count of addresses in the address table for the
bridge identified by this entry, since the system was last
initialized. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.5 |
| a3ComSysBridgeAddressThreshold mandatory A reporting threshold for the total number of addresses
known for the bridge identified by this entry. When this
threshold is reached, the event
a3ComSysBridgeAddressThreshold… | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.6 |
| a3ComSysBridgeMode mandatory The operational mode of the bridge identified by this
entry. Note that bridges which report notSupported(3)
will not support sets of this object, and that the value
notSupport… | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.7 |
| a3ComSysBridgeBackbonePort mandatory The number of the port selected as the backbone segment
port when the corresponding value of a3ComSysBridgeMode is
is expressMode(1). The value of this object can range
from 1… | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.8 |
| a3ComSysBridgeIpFragmentationEnabled mandatory A flag indicating whether or not IP fragmentation is
enabled on this bridge. Note that bridges which report
notSupported(3) will not support sets of this object, and
that the … | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.9 |