a3ComSysBridgeAddressThreshold

A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB · .1.3.6.1.4.1.43.29.4.10.2.1.6
MIB view Table view

Object

column mandatory r/w Integer32 
A reporting threshold for the total number of addresses 
known for the bridge identified by this entry.  When this 
threshold is reached, the event 
a3ComSysBridgeAddressThresholdEvent is generated.  The range of 
valid values for setting this object is between 1 and the 
corresponding value reported by a3ComSysBridgeAddressTableSize 
+ 1 (Note that this range applies to values issued in set 
requests.  The current value may be outside this range, 
for example if the corresponding value of a3ComSysBridgeMode is 
changed). Setting this object to one greater than the 
address table size disables the generation of 
a3ComSysBridgeAddressThresholdEvents since the limit will never 
be reached.

Context

MIB
A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
OID
.1.3.6.1.4.1.43.29.4.10.2.1.6
Type
column
Access
readwrite
Status
mandatory
Parent
a3ComSysBridgeEntry
Table
a3ComSysBridgeTable
Siblings
21

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
a3ComSysBridgeIndex mandatory
The index of the bridge identified by this entry, relative to this agent.
columnInteger32.1.3.6.1.4.1.43.29.4.10.2.1.1
a3ComSysBridgeTrFddiTranslationMode mandatory
The mode used to describe whether the embedded MAC addresses are byte-conjugated in order to convert them from Token Ring format to native FDDI format (and vice versa), or whet…
columnEnumeration.1.3.6.1.4.1.43.29.4.10.2.1.10
a3ComSysBridgeSTPGroupAddress mandatory
Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled).
columnOctetString.1.3.6.1.4.1.43.29.4.10.2.1.11
a3ComSysBridgeSTPEnable mandatory
This object indicates if spanning tree bridge feature is enabled or disabled. If enabled this value will equal true(1).
columnEnumeration.1.3.6.1.4.1.43.29.4.10.2.1.12
a3ComSysBridgeIpxSnapTranslationEnable mandatory
This object indicates if the IPX 802.3-FDDI SNAP Translation bridge feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supp…
columnEnumeration.1.3.6.1.4.1.43.29.4.10.2.1.13
a3ComSysBridgeLowLatencyEnable mandatory
This object indicates if the bridge low latency feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supported on all bridges.
columnEnumeration.1.3.6.1.4.1.43.29.4.10.2.1.14
a3ComSysBridgeVlanMode mandatory
This object indicates the VLAN types that this bridge will support. Open mode means that each VLAN within this bridge will be of the Open type; all VLANs within this bridge wi…
columnEnumeration.1.3.6.1.4.1.43.29.4.10.2.1.15
a3ComSysBridgeRateLimitReceiveMulticast mandatory
This object limits the number of multicast frames forwarded by this port over a 1 second interval. The value is set across all ports on the device.
columnInteger32.1.3.6.1.4.1.43.29.4.10.2.1.16
a3ComSysBridgeRateLimitReceiveBroadcast mandatory
This object limits the number of broadcast frames forwarded by this port over a 1 second interval. The value is set across all ports on the device.
columnInteger32.1.3.6.1.4.1.43.29.4.10.2.1.17
a3ComSysBridgeRateLimitReceiveFlood mandatory
This object limits the number of frames forwarded that would normally be flooded by this port over a 1 second interval. The value is set across all ports on the device.
columnInteger32.1.3.6.1.4.1.43.29.4.10.2.1.18
a3ComSysBridgeAddressLearnMode mandatory
This object determins the behavior of address management normal(1) - The device will learn dynamic addresses and static entries can be added. …
columnEnumeration.1.3.6.1.4.1.43.29.4.10.2.1.19
a3ComSysBridgePortCount mandatory
The number of bridge ports that the bridge identified by this entry controls.
columnInteger32.1.3.6.1.4.1.43.29.4.10.2.1.2
a3ComSysBridgeAddressAgingInterval mandatory
This object determines how long (in seconds) a dynamic entry is kept in the database.
columnInteger32.1.3.6.1.4.1.43.29.4.10.2.1.20
a3ComSysBridgeLoopDetectMode mandatory
This object determines the behavior of loop detection enabled(1) - The DA will detect loops and disable the apporiate port. disabled(2) - No loop …
columnEnumeration.1.3.6.1.4.1.43.29.4.10.2.1.21
a3ComSysBridgeLoopDetectSrcAddress mandatory
This object returns the source address that is used to determine if a loop is present between client ports
columnOctetString.1.3.6.1.4.1.43.29.4.10.2.1.22
a3ComSysBridgeAddressTableSize mandatory
The size of the address table for the bridge identified by this entry.
columnInteger32.1.3.6.1.4.1.43.29.4.10.2.1.3
a3ComSysBridgeAddressTableCount mandatory
The current count of addresses in the address table for the bridge identified by this entry.
columnInteger32.1.3.6.1.4.1.43.29.4.10.2.1.4
a3ComSysBridgeAddressTablePeakCount mandatory
The peak count of addresses in the address table for the bridge identified by this entry, since the system was last initialized.
columnInteger32.1.3.6.1.4.1.43.29.4.10.2.1.5
a3ComSysBridgeMode mandatory
The operational mode of the bridge identified by this entry. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupport…
columnEnumeration.1.3.6.1.4.1.43.29.4.10.2.1.7
a3ComSysBridgeBackbonePort mandatory
The number of the port selected as the backbone segment port when the corresponding value of a3ComSysBridgeMode is is expressMode(1). The value of this object can range from 1…
columnInteger32.1.3.6.1.4.1.43.29.4.10.2.1.8
a3ComSysBridgeIpFragmentationEnabled mandatory
A flag indicating whether or not IP fragmentation is enabled on this bridge. Note that bridges which report notSupported(3) will not support sets of this object, and that the …
columnEnumeration.1.3.6.1.4.1.43.29.4.10.2.1.9