h3cEponAutoAuthorize

A3COM-HUAWEI-EPON-MIB · .1.3.6.1.4.1.43.45.1.10.2.42.1.1.1
MIB view Table view

Object

scalar r/w SNMPv2-TCTruthValue 
This value determines whether software performs
self-authorization for each Optical Network Unit(ONU)
registering to the network.  Setting it to false
means for every ONU registering, software requires
external authorization, and until it's done the
ONU is not authenticated.  True value means software
authorizes each ONU registering to the network
automatically.
true  - ONUs are always authorized.
false - If 802.1x authorization is enable,
the ONUs have to be authorized by
the protocol.
- If 802.1x authorization is disable,
ONUs are always authorized.

Context

MIB
A3COM-HUAWEI-EPON-MIB
OID
.1.3.6.1.4.1.43.45.1.10.2.42.1.1.1
Type
scalar
Access
readwrite
Status
current
Parent
h3cEponSysMan
Siblings
19

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cEponMonitorCycleMaxVal
The upper limit of cycle which be confined to the h3cEponMonitorCycle.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.42.1.1.10
h3cEponMsgTimeOutMinVal
The lower limit of timeout which be confined to the h3cEponMsgTimeOut.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.42.1.1.11
h3cEponMsgTimeOutMaxVal
The upper limit of timeout which be confined to the h3cEponMsgTimeOut.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.42.1.1.12
h3cEponMsgLoseNumMinVal
The lower limit of time which be confined to the h3cEponMsgLoseNum.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.42.1.1.13
h3cEponMsgLoseNumMaxVal
The upper limit of time which be confined to the h3cEponMsgLoseNum.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.42.1.1.14
h3cEponSysScalarGroupnode-.1.3.6.1.4.1.43.45.1.10.2.42.1.1.15
h3cEponSysManTable
This table defines system related parameters.
table-.1.3.6.1.4.1.43.45.1.10.2.42.1.1.16
h3cEponAutoUpdateTable
EPON auto update ONU application configuration.
table-.1.3.6.1.4.1.43.45.1.10.2.42.1.1.17
h3cEponOuiIndexNextTable
Next OUI index table.
table-.1.3.6.1.4.1.43.45.1.10.2.42.1.1.18
h3cEponOuiTable
List of OUI and OAM supported by OLT.
table-.1.3.6.1.4.1.43.45.1.10.2.42.1.1.19
h3cEponMonitorCycle
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. Th…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.42.1.1.2
h3cEponMulticastControlTable
Multicast control global configuration.
table-.1.3.6.1.4.1.43.45.1.10.2.42.1.1.20
h3cEponMsgTimeOut
Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.42.1.1.3
h3cEponMsgLoseNum
The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.42.1.1.4
h3cEponSysHasEPONBoard
true(1) - At least an EPON board exists. false(2) - No EPON board exists.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.43.45.1.10.2.42.1.1.5
h3cEponMonitorCycleEnable
Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.43.45.1.10.2.42.1.1.6
h3cEponOltSoftwareErrAlmEnable
Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.43.45.1.10.2.42.1.1.7
h3cEponPortLoopBackAlmEnable
LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.43.45.1.10.2.42.1.1.8
h3cEponMonitorCycleMinVal
The lower limit of cycle which be confined to the h3cEponMonitorCycle.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.42.1.1.9