A3COM-HUAWEI-EPON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
42
Rows
42
Columns
233

h3cEponSysManTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.1.16 · 1 row entry · 7 columns
Open in standard view 
This table defines system related parameters.
h3cEponSysManEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.1.16.1
The entry of the table h3cEponSysManTable.
Indexes
h3cEponSlotIndex
Column Syntax OID
h3cEponSlotIndex
Slot Index, the index of h3cEponSysManTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.16.1.1
h3cEponModeSwitch
cmode - epon standard mode.
hmode - private mode.
Enumerationr/w
Enumerated Values:
1cmode
2hmode
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.16.1.2
h3cEponAutomaticMode
Automatic mode setting: when enabled - after
new OLT is added, the OLT stack sets its encryption mode
to 'triple churning' and configure the OLT to authorize
ONU MAC addresses according to its table.
enable -enable aut…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.16.1.3
h3cEponOamDiscoveryTimeout
Time out parameter for extended OAM discovery
process message, ranging from 0 to 2550,
measured in 100 milliseconds.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.16.1.4
h3cEponEncryptionNoReplyTimeOut
Encryption response timeout,
ranging from 1 to 2550,
measured in 100 milliseconds.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.16.1.5
h3cEponEncryptionUpdateTime
Encryption key update timer for all ONUs on slot,
indicated by h3cEponSlotIndex,
ranging from 1 to 255, measured in seconds.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.16.1.6
h3cEponAutoBindStatus
enable - auto bind ONU ID when the ONU registered in the EPON system.
disable - need manual bind ONU ID when the ONU registered in the EPON system.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.16.1.7

h3cEponAutoUpdateTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.1.17 · 1 row entry · 5 columns
Open in standard view 
EPON auto update ONU application configuration.
h3cEponAutoUpdateEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.1.17.1
The entry of the table h3cEponAutoUpdateTable.
Indexes
h3cEponSlotIndex
Column Syntax OID
h3cEponAutoUpdateFileName
The name of ONU application file, the file name must be valid
and include the path. It is a zero length string by default.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.17.1.1
h3cEponAutoUpdateSchedStatus
The status of schedule update configuration.
The h3cEponAutoUpdateFileName must be set before enable
h3cEponAutoUpdateSchedStatus.
enable - enable ONU schedule update.
disable - disable ONU schedule update.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.17.1.2
h3cEponAutoUpdateSchedTime
The schedule update timing configuration is related to
the h3cEponAutoUpdateSchedType.
auto update daily: the string format is hhmm
auto update weekly: the string format is hhmmw
'w' means update weekly, it ranges from …
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.17.1.3
h3cEponAutoUpdateSchedType
The update type of auto updating configuration.
daily - update ONU application every day.
weekly - update ONU application every week.
comingdate - update ONU application on coming date.
Enumerationr/w
Enumerated Values:
1daily
2weekly
3comingdate
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.17.1.4
h3cEponAutoUpdateRealTimeStatus
The status of real time update configuration.
The h3cEponAutoUpdateFileName must be set before enable
h3cEponAutoUpdateRealTimeStatus.
enable - enable ONU real time update.
disable - disable ONU real time update.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.17.1.5

h3cEponOuiIndexNextTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.1.18 · 1 row entry · 1 columns
Open in standard view 
Next OUI index table.
h3cEponOuiIndexNextEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.1.18.1
The entry of the table h3cEponOuiIndexNextTable.
Indexes
h3cEponSlotIndex
Column Syntax OID
h3cEponOuiIndexNext
This object contains an appropriate value to be used for
h3cEponOuiIndex when creating rows in the
h3cEponOuiTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.18.1.1

h3cEponOuiTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.1.19 · 1 row entry · 4 columns
Open in standard view 
List of OUI and OAM supported by OLT.
h3cEponOuiEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.1.19.1
The entry of the table h3cEponOuiTable.
Indexes
h3cEponSlotIndex h3cEponOuiIndex
Column Syntax OID
h3cEponOuiIndex
The index of this table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.19.1.1
h3cEponOuiValue
OUI list supported by the extended OAM discovery process.
The OUI is composed of six octets. The first six octets denote the first OUI ,
the second six octets denote the second OUI, and the like.
OctetStringr/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.19.1.2
h3cEponOamVersion
Version of OAM protocol defined by the organization denoted by OUI.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.19.1.3
h3cEponOuiRowStatus
The status of this table entry. Only active,
createAndGo and the destory are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.19.1.4

h3cEponMulticastControlTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.1.20 · 1 row entry · 3 columns
Open in standard view 
Multicast control global configuration.
h3cEponMulticastControlEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.1.20.1
The entry of the table h3cEponMulticastControlTable.
Indexes
h3cEponMulticastVlanId
Column Syntax OID
h3cEponMulticastVlanId
The index of this table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.20.1.1
h3cEponMulticastAddressList
The multicast address, each four octets represents a multicast address,
the address section ranging from the first four octets to the second
four octets, and the like.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.20.1.2
h3cEponMulticastStatus
The status of this table entry. Only active,
createAndGo and the destory are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.42.1.1.20.1.3

h3cOltSysManTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.3.1 · 1 row entry · 7 columns
Open in standard view 
This table defines several OLT system parameters:
(1)laser on time
(2)laser off time
(3)whether multiple copy broadcast
(4)whether discard packet
(5)self test
(6)self test result
h3cOltSysManEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.3.1.1
The entry of the table h3cOltSysManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOltLaserOnTime
The laser on time of the ONUs during the
discovery process, measured in Time Quanta(TQ).
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.1.1.1
h3cOltLaserOffTime
The laser off time of the ONUs during the
discovery process, measured in TQ.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.1.1.2
h3cOltMultiCopyBrdCast
true/false filtering of tagged multicast frames.
The software avert tagged downstream frames with
multicast or broadcast DA to the PON and not to the
CPU, except for special multicast frames
(link-constraint, IGMP cont…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.1.1.3
h3cOltEnableDiscardPacket
Forward(false)/discard(true) any frames received from
unlearned source address when the inside address
table of the original ONU entry reach to the limit.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.1.1.4
h3cOltSelfTest
selftest(1): Test OLT to check whether it's OK.
Enumerationr/w
Enumerated Values:
1selftest
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.1.1.5
h3cOltSelfTestResult
The self test result of the specific OLT.
other(1): The self test result is another reason.
ok(2): The self test result is OK.
fail(3): The self test result is fail.
Enumeration
Enumerated Values:
1other
2ok
3fail
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.1.1.6
h3cOltMaxRtt
Set the max Round Trip Time of this OLT.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.1.1.7

h3cOltInfoTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.3.2 · 1 row entry · 10 columns
Open in standard view 
Primary status of the specified OLT.
There will be one row in this table for each
information in the system.
(1)Software and hardware versions of the specified OLT
(h3cOltFirmMajorVersion, h3cOltFirmMinorVersion,
h3cOltHardMajorVersion, h3cOltHardMinorVersion)
(2)Several physical capabilities of an OLT device.
(h3cOltAgcLockTime, h3cOltAgcCdrTime)
(3)The operation(activation) status of an OLT.
(h3cOltMacAddress, h3cOltWorkMode)
h3cOltInfoEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.3.2.1
The entry of the table h3cOltInfoTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOltFirmMajorVersion
OLT firmware major version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.3.2.1.1
h3cOltFirmMinorVersion
OLT firmware minor version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.3.2.1.2
h3cOltHardMajorVersion
OLT hardware major version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.3.2.1.3
h3cOltHardMinorVersion
OLT hardware minor version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.3.2.1.4
h3cOltAgcLockTime
PON upstream data Automatic Gain Control(AGC) lock time,
measured in TQ,
range: 1 - 2^15.
0x7FFFFFFF: unknown value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.2.1.5
h3cOltAgcCdrTime
PON RX signal synchronization time,
measured in TQ,
range: 1 - 2^15.
0x7FFFFFFF: unknown value
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.2.1.6
h3cOltMacAddress
OLT MAC address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.2.1.7
h3cOltWorkMode
The operation(activation) modes of an OLT.
other(1) - The OLT is in another mode.
open(2) - The OLT is open.
reset(3) - The OLT is reset.
closed(4) - The OLT is closed.
Enumeration
Enumerated Values:
1other
2open
3reset
4closed
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.2.1.8
h3cOltOpticalPowerTx
The optical power transmitted by this OLT.
It measured in 0.01 dBm unit.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.2.1.9
h3cOltOpticalPowerRx
The burst optical power received by this OLT.
It measured in 0.01 dBm unit.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.2.1.10

h3cOltDbaManTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.3.3 · 1 row entry · 7 columns
Open in standard view 
This table defines the primary parameters of the
Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.
h3cOltDbaManEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.3.3.1
The entry of the table h3cOltDbaManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOltDbaEnabledType
Enable different types of the DBA algorithm.
Start upstream dynamic bandwidth allocation algorithm,
replacing former bandwidth allocation mechanism.
internal(1) - OLT internal Service Level Agreement(SLA) based
algorith…
Enumerationr/w
Enumerated Values:
1internal
2external
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.3.1.1
h3cOltDbaDiscoveryLength
Discovery length in TQ units.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.3.1.2
h3cOltDbaDiscovryFrequency
How often should the OLT send discovery frames to
the ONUs, measured in grant cycles.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.3.1.3
h3cOltDbaCycleLength
The grant cycle length in TQ units.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.3.1.4
h3cOltDbaVersion
DBA version of the OLT.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.3.3.1.5
h3cOltDbaUpdate
Update(1): Update the DBA algorithm with a binary
file which is loaded to the OLT from an external source(flash).
Config the MIB object module h3cEponDbaUpdateFileName.
Enumerationr/w
Enumerated Values:
1update
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.3.1.6
h3cOltDbaUpdateResult
The latest DBA update result.
other: The DBA update result is another reason.
ok: The DBA update result is OK.
fail: The DBA update result is fail.
fileNotExist: The DBA update failed because the file
does not exist…
Enumeration
Enumerated Values:
1other
2ok
3fail
4fileNotExist
5notSetFilename
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.3.1.7

h3cOltPortAlarmThresholdTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.3.4 · 1 row entry · 16 columns
Open in standard view 
The table defines the alarm threshold of OLT.
h3cOltPortAlarmThresholdEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1
The entry of the table h3cOltPortAlarmThresholdTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOltPortAlarmBerEnabled
Behavior of BER alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.1
h3cOltPortAlarmBerDirect
Traffic direction to monitor for BER alarm.
Enumerationr/w
Enumerated Values:
1berUplink
2berDownlink
3berAll
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.2
h3cOltPortAlarmBerThreshold
BER threshold exceed which the alarm is raised.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.3
h3cOltPortAlarmFerEnabled
Behavior of FER alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.4
h3cOltPortAlarmFerDirect
Traffic direction to monitor for FER alarm.
Enumerationr/w
Enumerated Values:
1ferUplink
2ferDownlink
3ferAll
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.5
h3cOltPortAlarmFerThreshold
Frame error rate exceed threshold then the alarm is raised.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.6
h3cOltPortAlarmLlidMismatchEnabled
Behavior of LLID mismatch alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.7
h3cOltPortAlarmLlidMismatchThreshold
The minimal number of mismatched frames exceed threshold then
LLID mismatch alarm is raised.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.8
h3cOltPortAlarmRemoteStableEnabled
Behavior of remote stable alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.9
h3cOltPortAlarmLocalStableEnabled
Behavior of local stable alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.10
h3cOltPortAlarmRegistrationEnabled
Behavior of registration alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.11
h3cOltPortAlarmOamDisconnectionEnabled
Behavior of Operations Administration and Maintenance(OAM)
disconnection alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.12
h3cOltPortAlarmEncryptionKeyEnabled
Behavior of encryption bad key alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.13
h3cOltPortAlarmVendorSpecificEnabled
Behavior of vendor specific alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.14
h3cOltPortAlarmRegExcessEnabled
Behavior of ONU registering over limitation alarm.
true(1) - alarm enable.
false(2) - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.15
h3cOltPortAlarmDFEEnabled
Behavior of device fatal error alarm.
true - alarm enable.
false - alarm disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.4.1.16

h3cOnuSilentTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.3.21 · 1 row entry · 2 columns
Open in standard view 
This table is used for getting silent ONU information of OLT.
h3cOnuSilentEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.3.21.1
The entry of the table h3cOnuSilentTable.
Indexes
IF-MIBifIndex h3cOnuSilentMacAddr
Column Syntax OID
h3cOnuSilentMacAddr
The MAC address of silent ONUs in OLT.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.21.1.1
h3cOnuSilentTime
The aging time of a silent ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.21.1.2

h3cOltUsingOnuTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.3.22 · 1 row entry · 3 columns
Open in standard view 
The table containing configurations to manage ONU interface(s)
based on OLT interface.
h3cOltUsingOnuEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.3.22.1
The entry of the table h3cOltUsingOnuTable.
Indexes
IF-MIBifIndex h3cOltUsingOnuNum
Column Syntax OID
h3cOltUsingOnuNum
The ONU interface number. This value is used to specify the ONU interface
which the user wants to configure for an OLT interface.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.22.1.1
h3cOltUsingOnuIfIndex
The ifIndex of the ONU interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.22.1.2
h3cOltUsingOnuRowStatus
This object is responsible for managing the creation,
deletion and modification of rows, which supports active
status and CreatAndGo, destroy operation.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.42.1.3.22.1.3

h3cOnuSysManTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.1 · 1 row entry · 15 columns
Open in standard view 
This table implements the following functions for ONUs:
1. Encrypting all downstream/upstream and
downstream directions traffic destined to and
originated from a specific LLID
(ONU in current implementation).
2. Restart a process of ONU authentication, using
the OLT (IEEE 802.1x) authenticator.
h3cOnuSysManEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1
The entry of the table h3cOnuSysManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuEncryptMan
Start encrypting all downstream/upstream and downstream
directions traffic destined to and originated from a
specific LLID (ONU in current implementation). ONU
registration encryption key is used as an initial value.
I…
Enumerationr/w
Enumerated Values:
1off
2downlink
3updownlink
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.1
h3cOnuReAuthorize
Restart a process of ONU authentication.
If 802.1x authentication is enabled, the OLT
(IEEE 802.1x) authenticator is applied.
Otherwise, use the default authentication.
Until the reauthentication succeeds, the ONU remai…
Enumerationr/w
Enumerated Values:
1reAuthorize
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.2
h3cOnuMulticastFilterStatus
true(1) - Multicast-Filter enable on ONU.
false(2) - Multicast-Filter disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.3
h3cOnuDbaReportQueueSetNumber
The number of queue sets reported in MPCP report frames.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.4
h3cOnuRemoteFecStatus
Value that indicates status of the 1000BASE-PX PHY
optional FEC Sublayer for forward error correction
see [802.3ah] clause 65.2.
enable - enable remote forward error correction.
disable - disable remote forward error co…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.5
h3cOnuPortBerStatus
enable - enable ONU port bit error rate alarm.
disable - disable ONU port bit error rate alarm.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.6
h3cOnuReset
Reboot ONU.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.7
h3cOnuMulticastControlMode
igmpsnooping - the traditional IGMP snooping mode.
multicastcontrol - the specific multicast control mode.
Enumerationr/w
Enumerated Values:
1igmpsnooping
2multicastcontrol
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.8
h3cOnuAccessVlan
The VLAN ID assigned to untagged frames received on ONU.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.9
h3cOnuEncryptKey
The encryption key, used to encrypt all downstream
traffic destined to and/or upstream traffic originating
from a specific ONU. It is a zero length, or MD5 hashed string,
by default, the string is empty.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.10
h3cOnuUniUpDownTrapStatus
true - A notification will be sent when UNI link status is change.
false - Device will not sent notification when UNI link status is
change.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.11
h3cOnuFecStatus
Value that indicates status of the 1000BASE-PX PHY
optional FEC Sublayer for forward error correction
(include remote onu and local OLT)
see [802.3ah] clause 65.2
enable - enable forward error correction.
disable - disa…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.12
h3cOnuMcastCtrlHostAgingTime
The host aging time of multicast control mode on ONU,
ranging from 200 to 1000, measured in seconds.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.13
h3cOnuMulticastFastLeaveEnable
true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU.
false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.14
h3cOnuPortIsolateEnable
true(1) - Enable port isolate setting on all ethernet UNIs of the ONU.
false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.1.1.15

h3cOnuLinkTestTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.2 · 1 row entry · 12 columns
Open in standard view 
LLID link test applying to the ONU only including delay
measurement option.  The command tests a link to a single
LLID over a period of time or once, using a variable
number of measurement frames.  The length of the measurement
frames is also parameterized.  The test uses a loopback
mode of the ONU to return each measurement frame,
loopback activation is done using randomly patterned
OAM Protocol Data Unit(PDU) frames.
h3cOnuLinkTestEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1
The entry of h3cOnuLinkTestEntry.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuLinkTestFrameNum
Exact number of measurement frames.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.1
h3cOnuLinkTestFrameSize
Measurement frames data size, measured in bytes.
Not including Preamble, SFD, VLAN tag, and FCS.
Frame size minimum value is 56 - if VLAN tag is
enabled('VLAN enable' field is set to ENABLE),
and 60 - if VLAN tag is dis…
Integer32r/w
Constraints:
range: 60-1514
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.2
h3cOnuLinkTestDelay
true:Link test includes delay measurement,
which corresponds to the difference between sent
and received times(including granting delay and
firmware processing time overheads).
false:Link test not includes a delay measu…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.3
h3cOnuLinkTestVlanTag
true:Enable VLAN tag in link test frames.
false:Link test not includes frames with VLAN tag.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.4
h3cOnuLinkTestVlanPriority
VLAN priority: 0-7.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.5
h3cOnuLinkTestVlanTagID
VLAN ID: 1-4094.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.6
h3cOnuLinkTestResultSentFrameNum
The total number of frames sent during the link test process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.7
h3cOnuLinkTestResultRetFrameNum
The total number of frames return back during the link test process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.8
h3cOnuLinkTestResultRetErrFrameNum
The total number of error frames return back during the
link test process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.9
h3cOnuLinkTestResultMinDelay
The minimum delay time in TQ units, which corresponds
to the difference between sent and received times
(including granting delay and firmware processing time
overheads). It's invalid if the field
'h3cOnuLinkTestDelay'…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.10
h3cOnuLinkTestResultMeanDelay
The average delay time in TQ units, which corresponds
to the difference between sent and received times
(including granting delay and firmware processing time
overheads). It's invalid if the field
'h3cOnuLinkTestDelay'…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.11
h3cOnuLinkTestResultMaxDelay
The maximum delay time in TQ units, which corresponds
to the difference between sent and received times
(including granting delay and firmware processing time
overheads). It's invalid if the field
'h3cOnuLinkTestDelay'…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.2.1.12

h3cOnuBandWidthTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.3 · 1 row entry · 10 columns
Open in standard view 
Set bandwidth policy parameters(restrictions)for a LLID
(only for the ONU).  Default policies are set to disable.
Policy parameters will be erased upon LLID network disconnection.
h3cOnuBandWidthEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.3.1
The entry of table h3cOnuBandWidthTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuDownStreamBandWidthPolicy
true:Enable static bandwidth configuration policing.
false:Disable static bandwidth configuration policing.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.3.1.1
h3cOnuDownStreamMaxBandWidth
Maximum bandwidth allowed for the ONU,
measured in Kbits/Sec.
Integer32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.3.1.2
h3cOnuDownStreamMaxBurstSize
Maximal number of bytes in a burst.
The value is truncated to the nearest
smaller 128 bytes multiple value,
measured in bytes.
Integer32r/w
Constraints:
range: 0-8388480
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.3.1.3
h3cOnuDownStreamHighPriorityFirst
true:Enable high priority frames preference.
false:Disable high priority frames preference.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.3.1.4
h3cOnuDownStreamShortFrameFirst
true:Enable short frames preference.
false:Disable short frames preference.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.3.1.5
h3cOnuP2PBandWidthPolicy
true:Enable static bandwidth configuration policing.
false:Disable static bandwidth configuration policing.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.3.1.6
h3cOnuP2PMaxBandWidth
Maximum bandwidth allowed for the ONU,
measured in Kbits/Sec.
Integer32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.3.1.7
h3cOnuP2PMaxBurstSize
Maximal number of bytes in a burst.
The value is truncated to the nearest
smaller 128 bytes multiple value,
measured in bytes.
Integer32r/w
Constraints:
range: 0-8388480
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.3.1.8
h3cOnuP2PHighPriorityFirst
true:Enable high priority frames preference.
false:Disable high priority frames preference.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.3.1.9
h3cOnuP2PShortFrameFirst
true:Enable short frames preference.
false:Disable short frames preference.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.3.1.10

h3cOnuSlaManTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.4 · 1 row entry · 7 columns
Open in standard view 
Two types of DBA algorithm are supported in the ONU.
The internal SLA based algorithm is always activated.
This table defines the primary parameter about the
internal SLA algorithm.
h3cOnuSlaManEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.4.1
The entry of table h3cOnuSlaManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuSlaMaxBandWidth
Maximum bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of h3cOnuSlaBandWidthStepVal.
The minimum bandwidth should not be larger than the maximum
bandwidth.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.4.1.1
h3cOnuSlaMinBandWidth
Minimum bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of h3cOnuSlaBandWidthStepVal.
The maximum bandwidth should be larger than the minimum bandwidth.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.4.1.2
h3cOnuSlaBandWidthStepVal
Granularity of bandwidth - measured in Kbit/s.
The value of h3cOnuSlaMaxBandWidth and h3cOnuSlaMinBandWidth should
be the multiple of the value of this object.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.4.1.3
h3cOnuSlaDelay
low - low delay.
high - high delay.
The delay constraint of a specific ONU. Set to high may improve the
bandwidth usage at the cost of delay.
Enumerationr/w
Enumerated Values:
1low
2high
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.4.1.4
h3cOnuSlaFixedBandWidth
Fixed bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of h3cOnuSlaBandWidthStepVal.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.4.1.5
h3cOnuSlaPriorityClass
Precedence of this flow over others in case of contention.
0 is the lowest priority and 7 is the highest priority.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.4.1.6
h3cOnuSlaFixedPacketSize
Fixed packet size - measured in byte.
The value of this object should be valid when h3cOnuSlaFixedBandWidth is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.4.1.7

h3cOnuInfoTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.5 · 1 row entry · 18 columns
Open in standard view 
Primary status of the specified ONU.
There will be one row in this table for each
information in the system.
(1)Software and hardware versions of the specified ONU
(h3cOnuHardMajorVersion, h3cOnuHardMinorVersion,
h3cOnuUniMacType)
(2)Several physical capabilities of the ONU.
(h3cOnuLaserOnTime, h3cOnuLaserOffTime,
h3cOnuGrantFifoDep.)
(3)The operation(activation) status of the ONU.
(h3cOnuWorkMode)
h3cOnuInfoEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1
The entry of the h3cOnuInfoTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuHardMajorVersion
ONU hardware major version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.1
h3cOnuHardMinorVersion
ONU hardware minor version. If the object length is
zero, it means the version is unknown.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.2
h3cOnuSoftwareVersion
ONU software version.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.3
h3cOnuUniMacType
ONU User Network Interface(UNI) port MAC type.
Enumeration
Enumerated Values:
1other
2mii
3gmii
4tbi
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.4
h3cOnuLaserOnTime
The ONU laser on time measured in TQ units. If the object value is
0x7FFFFFFF, it means h3cOnuLaserOnTime is unknown.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.5
h3cOnuLaserOffTime
The ONU laser off time measured in TQ units. If the object value is
0x7FFFFFFF, it means h3cOnuLaserOffTime is unknown.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.6
h3cOnuGrantFifoDep
Maximal number of grant records an ONU can store,
relevant to ONU only.
range: 1 - 255.
0x7FFFFFFF: unknown value.
Integer32
Constraints:
range: 1-255
range: 2147483647-2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.7
h3cOnuWorkMode
The operation(activation) mode of an ONU.
other(1) - ONU is in another mode.
on(2) - ONU is registered and authorized to the
network. In this mode it works
as a media converter.
pending(3) - ONU has been registe…
Enumeration
Enumerated Values:
1other
2on
3pending
4off
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.8
h3cOnuPCBVersion
ONU PCB version.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.9
h3cOnuRtt
The signal round-trip-time(RTT) received.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.10
h3cOnuEEPROMVersion
ONU EEPROM version.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.11
h3cOnuRegType
ONU registered type.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.12
h3cOnuHostType
ONU host type.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.13
h3cOnuDistance
The distance between OLT and ONU, measured in meter.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.14
h3cOnuLlid
The link layer identifier, which uniquely identifies the ONU
of a specific OLT.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.15
h3cOnuVendorId
ONU vendor ID.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.16
h3cOnuFirmwareVersion
ONU firmware version.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.17
h3cOnuOpticalPowerReceivedByOlt
The burst ONU optical power received by OLT,
and when the ONU status is up the value is usable.
It measured in 0.01 dBm unit.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.5.1.18

h3cOnuMacAddrInfoTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.6 · 1 row entry · 3 columns
Open in standard view 
This table used for getting MAC address information of ONU.
h3cOnuMacAddrInfoEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.6.1
The entry of the h3cEponOnuMacAddrInfoTable.
Indexes
IF-MIBifIndex h3cOnuMacIndex
Column Syntax OID
h3cOnuMacIndex
The index of ONUs in one OLT.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.6.1.1
h3cOnuMacAddrFlag
The flag of ONU status.
1 - bound:The ONU is bound but not registered.
2 - registered:The ONU is registered but not bound.
3 - run:The ONU is registered and bound on one OLT.
4 - regIncorrect:The ONU is bound on one OLT…
Enumeration
Enumerated Values:
1bound
2registered
3run
4regIncorrect
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.6.1.2
h3cOnuMacAddress
The MAC address of ONU.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.6.1.3

h3cOnuBindMacAddrTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.7 · 1 row entry · 2 columns
Open in standard view 
This table implements the following functions for ONUs:
Bind MAC of ONU.
h3cOnuBindMacAddrEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.7.1
The entry of the table h3cOnuBindMacAddrTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuBindMacAddress
Bind the MAC of ONU.
While the MAC is not bound, the ONU can not go into
effect and configurations can not be set.
Set 0-0-0 (MAC address) to the EPON device port will
unbind the relationship with the original MAC and
c…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.7.1.1
h3cOnuBindType
Set the binding type with the ONU which is confined
to the index of h3cEponOnuTypeDescr.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.7.1.2

h3cOnuFirmwareUpdateTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.8 · 1 row entry · 3 columns
Open in standard view 
This table implements the following functions for ONUs:
1. Update the ONU firmware.
2. Result of update ONU firmware.
h3cOnuFirmwareUpdateEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.8.1
The entry of the table h3cOnuFirmwareUpdateTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuUpdate
update(1): Update the ONU firmware.
Config the MIB object module h3cEponOnuUpdateFileName
with the filename of ONU firmware first.
Enumerationr/w
Enumerated Values:
1update
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.8.1.1
h3cOnuUpdateResult
The ONU firmware update result.
updating - The ONU is updating firmware right now.
ok - The ONU update result is OK.
fail - The ONU update result is fail.
fileNotExist - The ONU update failed because the file doe…
Enumeration
Enumerated Values:
1updating
2ok
3fail
4fileNotExist
5notSetFilename
6fileNotMatchONU
7timeout
8otherError
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.8.1.2
h3cOnuUpdateFileName
The filename of the ONU firmware to be updated.
Note that the filename must contain the file path.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.8.1.3

h3cEponOnuTypeManTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.15 · 1 row entry · 2 columns
Open in standard view 
This table is used for getting ONU bind type in current version.
h3cEponOnuTypeManEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.15.1
The entry of the h3cEponOnuTypeManTable.
Indexes
h3cEponOnuTypeIndex
Column Syntax OID
h3cEponOnuTypeIndex
The ONU type index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.15.1.1
h3cEponOnuTypeDescr
The ONU type description which can be used to bind ONU in current
version.
the value of h3cOnuBindType can be configured by the index of
h3cEponOnuTypeDescr.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.5.15.1.2

h3cOnuPacketManTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.16 · 1 row entry · 2 columns
Open in standard view 
This table implements the following functions:
(1)Manage packet priority trust mode.
(2)Manage packet queue-scheduler mode.
h3cOnuPacketManEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.16.1
The entry of the h3cOnuPacketManTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuPriorityTrust
The QOS mode which is assigned on ONU.
dscp - The service dscp of politic Priority.
ipprecedence - The service IP precedence of politic Priority.
cos - The service cos of politic Priority.
Enumerationr/w
Enumerated Values:
1dscp
2ipprecedence
3cos
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.16.1.1
h3cOnuQueueScheduler
The packet queue-scheduler mode which is assigned on ONU.
spq - strict priority queuing.
wfq - specifies the weights for weighted round-robin queuing.
Enumerationr/w
Enumerated Values:
1spq
2wfq
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.16.1.2

h3cOnuProtocolTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.17 · 1 row entry · 10 columns
Open in standard view 
This table implements the following functions:
(1)Manage STP status.
(2)Manage IGMP-snooping.
(3)Manage DHCP-snooping.
h3cOnuProtocolEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.17.1
The entry of h3cOnuProtocolTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuStpStatus
true(1) - STP status enable on ONU.
false(2) - STP status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.17.1.1
h3cOnuIgmpSnoopingStatus
true(1) - IGMP snooping status enable on ONU.
false(2) - IGMP snooping status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.17.1.2
h3cOnuDhcpsnoopingOption82
true(1) - DHCP snooping Option 82 status enable on ONU.
false(2) - DHCP snooping Option 82 status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.17.1.3
h3cOnuDhcpsnooping
true(1) - DHCP snooping status enable on ONU.
false(2) - DHCP snooping status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.17.1.4
h3cOnuPppoe
true(1) - PPPOE status enable on ONU.
false(2) - PPPOE status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.17.1.5
h3cOnuIgmpSnoopingHostAgingT
Set the host aging time of IGMP on ONU.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.17.1.6
h3cOnuIgmpSnoopingMaxRespT
Set the max response time of IGMP on ONU.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.17.1.7
h3cOnuIgmpSnoopingRouterAgingT
Set the router aging time of IGMP on ONU.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.17.1.8
h3cOnuIgmpSnoopingAggReportS
true(1) - Igmp snooping aggregation report status enable on ONU.
false(2) - Igmp snooping aggregation report status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.17.1.9
h3cOnuIgmpSnoopingAggLeaveS
true(1) - Igmp snooping aggregation leave status enable on ONU.
false(2) - Igmp snooping aggregation leave status disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.17.1.10

h3cOnuDot1xTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.18 · 1 row entry · 2 columns
Open in standard view 
This table implements the following functions:
(1)Manage 802.1x account.
(2)Manage 802.1x password.
ONU will be authorized to send and receive frames when the
account and the password are all right, otherwise this ONU
will be unavailable.
h3cOnuDot1xEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.18.1
The entry of the h3cOnuDot1xTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuDot1xAccount
ONU 802.1X account.
The object value cannot be set as 'a', 'al' or 'all'.
The object should be set together with h3cOnuDot1xPassword.
OctetStringr/w .1.3.6.1.4.1.43.45.1.10.2.42.1.5.18.1.1
h3cOnuDot1xPassword
ONU 802.1X password.
The object should be set together with h3cOnuDot1xAccount.
OctetStringr/w .1.3.6.1.4.1.43.45.1.10.2.42.1.5.18.1.2

h3cOnuPriorityQueueTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.19 · 1 row entry · 3 columns
Open in standard view 
This table contains specific information of priority queue.
h3cOnuPriorityQueueEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.19.1
The entry of h3cOnuPriorityQueueTable.
Indexes
IF-MIBifIndex h3cOnuQueueDirection h3cOnuQueueId
Column Syntax OID
h3cOnuQueueDirection
The direction of priority queue.
Enumeration
Enumerated Values:
1inbound
2outbound
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.19.1.1
h3cOnuQueueId
The queue ID of priority queue.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.19.1.2
h3cOnuQueueSize
The size of priority queue, measured in percent. The total length of
all priority queues is a constant, by default, it is assigned to all
of the priority queues evenly. The length of each priority queue may
be changed b…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.19.1.3

h3cOnuCountTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.20 · 1 row entry · 2 columns
Open in standard view 
This table contains statistics of ONU port.
h3cOnuCountEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.20.1
The entry of h3cOnuCountTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuInCRCErrPkts
The total number of frames received with bad CRC checksum.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.20.1.1
h3cOnuOutDroppedFrames
The total number of frames dropped because of buffer failure.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.20.1.2

h3cOnuQueueBandwidthTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.22 · 1 row entry · 3 columns
Open in standard view 
This table contains specific bandwidth information of ONU priority queue.
h3cOnuQueueBandwidthEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.22.1
The entry of h3cOnuQueueBandwidthTable.
Indexes
IF-MIBifIndex h3cOnuQueueDirection h3cOnuQueueId
Column Syntax OID
h3cOnuQueueMaxBandwidth
The maximum bandwidth of specific ONU priority queue,
measured in 100Kbps.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.22.1.1
h3cOnuQueueMaxBurstsize
The maximum burst size of specific ONU priority queue,
measured in 64Bytes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.22.1.2
h3cOnuQueuePolicyStatus
true - enable bandwidth policy
false - disable bandwidth policy
The bandwidth administrative status of specific ONU priority queue.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.22.1.3

h3cOnuIpAddressTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.23 · 1 row entry · 6 columns
Open in standard view 
ONU IP address table.
h3cOnuIpAddressEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.23.1
The entry of h3cOnuIpAddressTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuIpAddress
The IP address assigned to the ONU.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.23.1.1
h3cOnuIpAddressMask
The mask of IP address denoted by h3cOnuIpAddress.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.23.1.2
h3cOnuIpAddressGateway
The gateway of IP address denoted by h3cOnuIpAddress.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.23.1.3
h3cOnuDhcpallocate
true(1) - ONU auto allocate IP address status enable.
false(2) - ONU auto allocate IP address status disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.23.1.4
h3cOnuManageVID
The management VLAN of ONU denoted by h3cOnuManageVID.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.23.1.5
h3cOnuManageVlanIntfS
The management interface status of ONU denoted by h3cOnuManageVlanIntfS.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.23.1.6

h3cOnuChipSetInfoTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.24 · 1 row entry · 4 columns
Open in standard view 
ONU vendor specific information of ONU.
h3cOnuChipSetInfoEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.24.1
The entry of h3cOnuChipSetInfoTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuChipSetVendorId
Chipset vendor ID, which identifies the ONU's PON chip vendor
according JEDEC ID code.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.24.1.1
h3cOnuChipSetModel
Chip model, numbering(range from 0 to 0xFF) by the chip vendor.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.24.1.2
h3cOnuChipSetRevision
Chip revision.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.24.1.3
h3cOnuChipSetDesignDate
Chip design date.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.24.1.4

h3cOnuCapabilityTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.25 · 1 row entry · 12 columns
Open in standard view 
Capability of ONU.
h3cOnuCapabilityEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1
The entry of the table h3cOnuCapabilityTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuServiceSupported
Services types supported by the ONU.
These functional groups can be supported independently.
geinterfacesupport - supporting (1)/not supporting(0)
Gbit Ethernet GE interface.
feinterfacesupport - supporting (1)/not supp…
Bits
Enumerated Values:
0geinterfacesupport
1feinterfacesupport
2voipservicesupport
3tdmservicesupport
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.1
h3cOnuGEPortNumber
The current gigabit ethernet ports number supported by the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.2
h3cOnuFEPortNumber
the current fast ethernet ports number supported by the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.3
h3cOnuPOTSPortNumber
The current POTS ports number supported by the ONU
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.4
h3cOnuE1PortsNumber
The current E1 ports number supported by the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.5
h3cOnuUpstreamQueueNumber
The number of upstream queues supported by the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.6
h3cOnuMaxUpstreamQueuePerPort
The number of maximum upstream queues per port of the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.7
h3cOnuDownstreamQueueNumber
The number of downstream queues supported by the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.8
h3cOnuMaxDownstreamQueuePerPort
The number of maximum downstream queues per port of the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.9
h3cOnuBatteryBackup
true(1) - ONU supports a reserve battery.
false(2) - ONU does not support a reserve battery.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.10
h3cOnuIgspFastLeaveSupported
true(1) - ONU supports fast leave in igsp mode.
false(2) - ONU does not support fast leave in igsp mode.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.11
h3cOnuMCtrlFastLeaveSupported
true(1) - ONU supports fast leave in multicast control mode.
false(2) - ONU does not support fast leave in multicast control mode.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.25.1.12

h3cOnuDbaReportTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.26 · 1 row entry · 3 columns
Open in standard view 
This table defines the information of DBA(dynamic bandwidth allocation)
report threshold contained in the MPCP report frames.
h3cOnuDbaReportEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.26.1
The entry of the table h3cOnuDbaReportTable.
Indexes
IF-MIBifIndex h3cOnuDbaReportQueueId
Column Syntax OID
h3cOnuDbaReportQueueId
The DBA report queue ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.26.1.1
h3cOnuDbaReportThreshold
The threshold of the DBA report queue.
the following is the queue ID and
the related default threshold setting.
1 - 0
2 - 0
3 - 0
4 - 65535
5 - 65535
6 - 0
7 - 0
8 - 0
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.26.1.2
h3cOnuDbaReportStatus
enable -threshold configuration is active for the queue.
disable -threshold configuration is not active for the queue.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.26.1.3

h3cOnuCosToLocalPrecedenceTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.27 · 1 row entry · 2 columns
Open in standard view 
Table of map of the COS to local-precedence.
h3cOnuCosToLocalPrecedenceEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.27.1
Configuration information of map of the COS to local precedence.
Indexes
IF-MIBifIndex h3cOnuCosToLocalPrecedenceCosIndex
Column Syntax OID
h3cOnuCosToLocalPrecedenceCosIndex
Index of the map, obtains from packet cos value.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.27.1.1
h3cOnuCosToLocalPrecedenceValue
Value of local precedence.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.27.1.2

h3cEponOnuStpPortTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.28 · 1 row entry · 3 columns
Open in standard view 
Table of ONU STP ports.
h3cEponOnuStpPortEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.28.1
Configuration information of ONU STP ports.
Indexes
IF-MIBifIndex h3cEponStpPortIndex
Column Syntax OID
h3cEponStpPortIndex
The index of the STP ports.
Integer32
Constraints:
range: 0-144
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.28.1.1
h3cEponStpPortDescr
The description of the STP ports.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.1.5.28.1.2
h3cEponStpPortState
The current state of the port (i.e. disabled, discarding,
learning and forwarding).
Enumeration
Enumerated Values:
1disabled
2discarding
3learning
4forwarding
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.28.1.3

h3cOnuPhysicalTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.29 · 1 row entry · 5 columns
Open in standard view 
This table is used for getting ONU physical information.
h3cOnuPhysicalEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.29.1
The entry of the h3cOnuPhysicalTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cOnuBridgeMac
The bridge MAC address of ONU.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.29.1.1
h3cOnuFirstPonMac
The MAC address of ONU first PON port.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.29.1.2
h3cOnuFirstPonRegState
The register state of ONU first PON port.
Enumeration
Enumerated Values:
1notExist
2absent
3offline
4silent
5down
6up
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.29.1.3
h3cOnuSecondPonMac
The MAC address of ONU second PON port.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.29.1.4
h3cOnuSecondPonRegState
The register state of ONU second PON port.
Enumeration
Enumerated Values:
1notExist
2absent
3offline
4silent
5down
6up
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.29.1.5

h3cOnuSmlkTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.30 · 1 row entry · 5 columns
Open in standard view 
This table is used for getting ONU SMLK information.
h3cOnuSmlkEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.30.1
The entry of the h3cOnuSmlkTable.
Indexes
IF-MIBifIndex h3cOnuSmlkGroupID
Column Syntax OID
h3cOnuSmlkGroupID
The SMLK group ID of ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.30.1.1
h3cOnuSmlkFirstPonRole
The role of ONU first PON port in a SMLK group.
Enumeration
Enumerated Values:
1master
2slave
3null
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.30.1.2
h3cOnuSmlkFirstPonStatus
The transmitting status of ONU first PON port in a SMLK group.
Enumeration
Enumerated Values:
1active
2standby
3down
4null
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.30.1.3
h3cOnuSmlkSecondPonRole
The role of ONU second PON port in a SMLK group.
Enumeration
Enumerated Values:
1master
2slave
3null
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.30.1.4
h3cOnuSmlkSecondPonStatus
The transmitting status of ONU second PON port in a SMLK group.
Enumeration
Enumerated Values:
1active
2standby
3down
4null
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.30.1.5

h3cOnuRS485PropertiesTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.31 · 1 row entry · 11 columns
Open in standard view 
Property table.
h3cOnuRS485PropertiesEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1
The entry of property table.
Indexes
IF-MIBifIndex h3cOnuRS485SerialIndex
Column Syntax OID
h3cOnuRS485SerialIndex
The index of serial port.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1.1
h3cOnuRS485BaudRate
The port baud rate.
Enumerationr/w
Enumerated Values:
1baudRate300
2baudRate600
3baudRate1200
4baudRate2400
5baudRate4800
6baudRate9600
7baudRate19200
8baudRate38400
9baudRate57600
10baudRate115200
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1.2
h3cOnuRS485DataBits
The port number of data bits in a character.
bitEnumerationr/w
Enumerated Values:
1five
2six
3seven
4eight
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1.3
h3cOnuRS485Parity
The port sense of a character parity bit.
Enumerationr/w
Enumerated Values:
1none
2odd
3even
4mark
5space
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1.4
h3cOnuRS485StopBits
The port number of stop bits.
bitEnumerationr/w
Enumerated Values:
1one
2two
3oneAndHalf
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1.5
h3cOnuRS485FlowControl
The port type of input flow control.
'none' indicates no flow control at this level.
'hardware' indicates using hardware signals.
'xonOrxoff' indicates using software function.
Enumerationr/w
Enumerated Values:
1none
2hardware
3xonOrxoff
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1.6
h3cOnuRS485TXOctets
The number of output octets about the port.
The unit is byte.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1.7
h3cOnuRS485RXOctets
The number of input octets about the port.
The unit is byte.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1.8
h3cOnuRS485TXErrOctets
The number of output error octets about the port.
The unit is byte.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1.9
h3cOnuRS485RXErrOctets
The number of input error octets about the port.
The unit is byte.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1.10
h3cOnuRS485ResetStatistics
Reset the counters to zero, including h3cOnuRS485TXOctets,
h3cOnuRS485RXOctets, h3cOnuRS485TXErrOctets and
h3cOnuRS485RXErrOctets.
Enumerationr/w
Enumerated Values:
1counting
2clear
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.31.1.11

h3cOnuRS485SessionSummaryTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.32 · 1 row entry · 2 columns
Open in standard view 
Session summary table.
h3cOnuRS485SessionSummaryEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.32.1
The entry of session summary table.
Indexes
IF-MIBifIndex h3cOnuRS485SerialIndex
Column Syntax OID
h3cOnuRS485SessionMaxNum
The max session number of every serial port
which can be supported.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.32.1.1
h3cOnuRS485SessionNextIndex
The next valid index used for creating a new session raw.
When there is no valid index left, it will return 0.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.32.1.2

h3cOnuRS485SessionTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.33 · 1 row entry · 7 columns
Open in standard view 
RS485 raw session table.  Data received from RS485 will be sent
to the destination by raw sockets.
h3cOnuRS485SessionEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.33.1
The entry of session table.
Indexes
IF-MIBifIndex h3cOnuRS485SerialIndex h3cOnuRS485SessionIndex
Column Syntax OID
h3cOnuRS485SessionIndex
Raw session index.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.33.1.1
h3cOnuRS485SessionType
The type of a session.
A session can use UDP socket, TCP socket as a client,
or TCP socket as a server.
Enumerationr/w
Enumerated Values:
1udp
2tcpClient
3tcpServer
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.33.1.2
h3cOnuRS485SessionAddType
This object indicates the transport type of the
address contained in h3cOnuRS485SessionRemoteIP object.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.33.1.3
h3cOnuRS485SessionRemoteIP
The IP of remote landing.
When session type is 'udp', this is the peer IP.
When session type is 'tcpClient', this is the server IP.
When session type is 'tcpServer', this is invalid.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.33.1.4
h3cOnuRS485SessionRemotePort
The port of remote landing.
When session type is 'udp', this is the peer port.
When session type is 'tcpClient', this is the server port.
When session type is 'tcpServer', this is invalid.
Integer32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.33.1.5
h3cOnuRS485SessionLocalPort
Local socket port.
When session type is 'udp', this is local UDP socket port.
When session type is 'tcpClient', this is invalid.
When session type is 'tcpServer', this is the local port which
will be listened.
Integer32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.33.1.6
h3cOnuRS485SessionRowStatus
The status used for creating,
modifying, and deleting instances of
the columnar objects in raw session table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.33.1.7

h3cOnuRS485SessionErrInfoTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.5.34 · 1 row entry · 1 columns
Open in standard view 
Error information table.  When failed to create a session,
error information can be got from this table.
h3cOnuRS485SessionErrInfoEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.5.34.1
The entry of error information table.
Indexes
IF-MIBifIndex h3cOnuRS485SerialIndex h3cOnuRS485SessionIndex
Column Syntax OID
h3cOnuRS485SessionErrInfo
Error information string. When a response with 'noCreeation' for
row creation in table h3cOnuRS485SessionTable,
the error reason can be got from this object.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.43.45.1.10.2.42.1.5.34.1.1

h3cEponBatchOperationBySlotTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.6.1 · 1 row entry · 4 columns
Open in standard view 
This table is used for batch operation by slot.
h3cEponBatchOperationBySlotEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.6.1.1
The entry of the h3cEponBatchOperationBySlotTable.
Indexes
h3cEponBatchOperationBySlotIndex
Column Syntax OID
h3cEponBatchOperationBySlotIndex
The EPON board index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.6.1.1.1
h3cEponBatchOperationBySlotType
The types of batch operation by slot:
1 - resetUnknown, the object value is not set.
9 - updateDba, update OLT DBA algorithm.
Config the MIB object module h3cEponDbaUpdateFileName.
10 - updateONU, update ONU firmware.…
Enumerationr/w
Enumerated Values:
1resetUnknown
9updateDba
10updateONU
 .1.3.6.1.4.1.43.45.1.10.2.42.1.6.1.1.2
h3cEponBatchOperationBySlot
Execute batch operation.
Enumerationr/w
Enumerated Values:
1batOpBySlot
 .1.3.6.1.4.1.43.45.1.10.2.42.1.6.1.1.3
h3cEponBatchOperationBySlotResult
The result of batch operation.
0xFFFF - other, general error.
1 - working, operation is not completed.
2 - successful, completed successfully.
3 - failed because the DBA source file does not exist.
4 - failed because th…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.6.1.1.4

h3cEponBatchOperationByOLTTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.6.2 · 1 row entry · 3 columns
Open in standard view 
This table is used for batch operation by OLT.
h3cEponBatchOperationByOLTEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.6.2.1
The entry of the h3cEponBatchOperationByOLTTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cEponBatchOperationByOLTType
The types of batch operation by OLT(operation for all ONUs in the
OLT):
1 -- resetUnknown, the object value is not set.
5 -- updateONU, update ONU firmware.
configure the MIB object module h3cEponOnuUpdateFileName
with …
Enumerationr/w
Enumerated Values:
1resetUnknown
5updateONU
 .1.3.6.1.4.1.43.45.1.10.2.42.1.6.2.1.1
h3cEponBatchOperationByOLT
Execute batch operation.
Enumerationr/w
Enumerated Values:
1batOpByOlt
 .1.3.6.1.4.1.43.45.1.10.2.42.1.6.2.1.2
h3cEponBatchOperationByOLTResult
The result of batch operation:
0xFFFF -- other, gernal error.
1 -- working, operation is not completed.
2 -- successful, operation completed successfully.
4 -- failed because the ONU firmware file does not exist.
6 -- f…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.6.2.1.3

h3cOnuFirmwareUpdateByTypeTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.6.3 · 1 row entry · 4 columns
Open in standard view 
This table is used to update ONU by ONU type.
h3cOnuFirmwareUpdateByTypeEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.6.3.1
The entry of the h3cOnuFirmwareUpdateByTypeTable.
Indexes
h3cOnuUpdateByOnuTypeIndex
Column Syntax OID
h3cOnuUpdateByOnuTypeIndex
The type and file relationship table entry index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.42.1.6.3.1.1
h3cOnuUpdateByTypeOnuType
The type of ONUs.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.43.45.1.10.2.42.1.6.3.1.2
h3cOnuUpdateByTypeFileName
The file to be updated for the type of ONUs.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.42.1.6.3.1.3
h3cOnuUpdateByTypeRowStatus
The status of this table entry.
Only createAndGo and destroy actions are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.42.1.6.3.1.4

h3cEponStatTable

table
.1.3.6.1.4.1.43.45.1.10.2.42.1.9.1 · 1 row entry · 2 columns
Open in standard view 
This table contains line code error statistics of epon port.
h3cEponStatEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.1.9.1.1
The entry of h3cEponStatTable.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cEponStatFER
The frame error rate of epon port, measured in 1e-9 unit.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.43.45.1.10.2.42.1.9.1.1.1
h3cEponStatBER
The bit error rate of epon port, measured in 1e-9 unit.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.43.45.1.10.2.42.1.9.1.1.2