Zhone-PTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
19
.1.3.6.1.4.1.5504.4.17.1.1 · 1 row entry · 14 columns
Table of configuration values for the Precision Timing Protocol.
zhonePtpConfigEntry entry .1.3.6.1.4.1.5504.4.17.1.1.1
Row in the PtpConfigTable
Indexes
zhonePtpConfigIfIndex
Column Syntax OID
zhonePtpConfigIfIndex
Index for this table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.5504.4.17.1.1.1.1
zhonePtpConfigClockMode
Describes the mode and function of this clock.
Enumerationr/w
Enumerated Values:
1master
2slave
3boundary
4transparent
5forward
.1.3.6.1.4.1.5504.4.17.1.1.1.2
zhonePtpConfigSyncMsgInterval
Log of mean time interval between successive Sync
messages when transmitted as multicast messages.
Integer32r/w
Constraints:
range: -128-127
.1.3.6.1.4.1.5504.4.17.1.1.1.3
zhonePtpConfigAnnounceInterval
Log of time, in seconds, to send announce messages.
Integer32r/w
Constraints:
range: -128-127
.1.3.6.1.4.1.5504.4.17.1.1.1.4
zhonePtpConfigDelayReqInterval
Log of minimum permitted mean time between successive
Delay_Req messages sent by a slave to a specific port
on the master.
Integer32r/w
Constraints:
range: -128-127
.1.3.6.1.4.1.5504.4.17.1.1.1.5
zhonePtpConfigDomain1MS
The domain for this PTP. If clockMode is boundary, then this
is the domain for the slave port.
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.5504.4.17.1.1.1.6
zhonePtpConfigVariance
Log of variance used in determination of the best master clock.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.5504.4.17.1.1.1.7
zhonePtpConfigPriority1
Precedence value used in best master algorithm, if master.
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.5504.4.17.1.1.1.8
zhonePtpConfigPriority2
Precedence used in best master determination, if master
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.5504.4.17.1.1.1.9
zhonePtpConfigDomain2M
If clockMode is boundary, then this is the domain for the
master port. Otherwise, it is unused.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.5504.4.17.1.1.1.10
zhonePtpConfigRowStatus
Row status for this table.
Zhone-TCZhoneRowStatusr/w
Textual Convention: Zhone-TCZhoneRowStatus Enumeration
Type Values:
1active
4createAndGo
6destroy
.1.3.6.1.4.1.5504.4.17.1.1.1.11
zhonePtpConfigIpIfIndex
The management ip index on this system.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.5504.4.17.1.1.1.12
zhonePtpConfigAcceptableMaster1
First acceptable PTP master.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.5504.4.17.1.1.1.13
zhonePtpConfigAcceptableMaster2
Second acceptable PTP master.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.5504.4.17.1.1.1.14
.1.3.6.1.4.1.5504.4.17.1.2 · 1 row entry · 5 columns
The read-only attributes associated with the 1588 module.
zhonePtpStatusEntry entry .1.3.6.1.4.1.5504.4.17.1.2.1
A row in the zhonePtpStatusTable
Indexes
zhonePtpConfigIfIndex
Column Syntax OID
zhonePtpStatusMacAddress
The ptpMacAddr is used to set the PTP ClockIdentifier defined
in the PTP standard. It identifies the clock in the PTP network
and as such should be unique within the PTP network.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.5504.4.17.1.2.1.1
zhonePtpConfigTimeSource
Time source for the PTP.
Enumeration
Enumerated Values:
1atom
2gps
3radio
4ptp
5ntp
6handSet
7other
8internalOscillator
.1.3.6.1.4.1.5504.4.17.1.2.1.2
zhonePtpConfigClockStratum
Indicates the stratum level of the local clock.
Enumeration
Enumerated Values:
1force
2primaryReference
3secondaryReference
4bestClockStratumThatCanBeSlave
5stratum3
6stratum4
7defaultStratum
.1.3.6.1.4.1.5504.4.17.1.2.1.3
zhonePtpConfigClockAccuracy
Accuracy of this clock. Used in determining best master clock.
Enumeration
Enumerated Values:
1nSec25
2nSec100
3nSec250
4uSec1
5uSec2point5
6uSec10
7uSec25
8uSec100
9uSec250
10mSec1
11mSec2point5
12mSec10
13mSec25
14mSec100
15mSec250
16sec1
17sec10
18gT10S
19accUnknown
.1.3.6.1.4.1.5504.4.17.1.2.1.4
zhonePtpStatusTxMode
By default, Semtech sends multicast messages (e.g. Announce Messages) if they
are meant for more than one node. Messages destined to a single node are sent
as unicast messages. If we want to support Acceptable Master a…
Enumeration
Enumerated Values:
1standard
2uniOnly
3multiOnly
.1.3.6.1.4.1.5504.4.17.1.2.1.5