ZYXEL-POWER-ETHERNET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
19

zyxelPoePsePortTable

table
.1.3.6.1.4.1.890.1.15.3.59.1.2 · 1 row entry · 4 columns
Open in standard view 
The table contains power ethernet port information.
zyxelPoePsePortEntry entry .1.3.6.1.4.1.890.1.15.3.59.1.2.1
An entry contains power ethernet port information.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
zyPoePsePortMaxPower
PoE PSE port user-defined max power expressed in milliwatt,
Valid value should be between 1000 and 33000,in steps of 200.
Value 0(Default) means to disable user-defined max power.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.59.1.2.1.1
zyPoePsePowerUp
Set PoE Power Up Mode Setup 802.3af mode (0), Legacy mode (1), Pre-802.3at mode(2), 802.3at mode(3), 802.3bt mode(4), Pre-802.3bt mode(5), Force-802.3at mode(6)
Enumerationr/w
Enumerated Values:
0ieee802dot3af
1legacy
2preIeee802dot3at
3ieee802dot3at
4ieee802dot3bt
5preIeee802dot3bt
6forceIeee802dot3at
 .1.3.6.1.4.1.890.1.15.3.59.1.2.1.2
zyPoePsePortTimeRange
Time-Based PoE allow to schedule the PoE works time.
Type in the time-range name witch is already created.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.59.1.2.1.3
zyPoePseWideRangeDetection
Set PoE Wide range detection Enable/Disable.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.59.1.2.1.4

zyxelPoePsePortTimeRangeTable

table
.1.3.6.1.4.1.890.1.15.3.59.1.6 · 1 row entry · 2 columns
Open in standard view 
The table contains power ethernet port time-range settings.
zyxelPoePsePortTimeRangeEntry entry .1.3.6.1.4.1.890.1.15.3.59.1.6.1
An entry contains power ethernet port time-range settings.
Indexes
BRIDGE-MIBdot1dBasePort zyPoePsePortTimeRangeName
Column Syntax OID
zyPoePsePortTimeRangeName
Time-Based PoE allow to schedule the PoE works time. Specifiy the time-range which is already created.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.59.1.6.1.1
zyPoePsePortTimeRangeRowStatus
This object allow entry to be create and deleted a poe port time-range entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.890.1.15.3.59.1.6.1.2

zyxelPoePsePortInfoTable

table
.1.3.6.1.4.1.890.1.15.3.59.2.1 · 1 row entry · 3 columns
Open in standard view 
The table contains power ethernet port information.
zyxelPoePsePortInfoEntry entry .1.3.6.1.4.1.890.1.15.3.59.2.1.1
An entry contains power ethernet port information.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
zyPoePsePortInfoPowerConsumption
PoE PSE port power consumption expressed in milliwatt.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.59.2.1.1.1
zyPoePsePortTimeRangeState
None(0): not bind with any time range.
In(1): system time is in the time range.
Out(2): system time is out of the time range.
Enumeration
Enumerated Values:
0none
1in
2out
 .1.3.6.1.4.1.890.1.15.3.59.2.1.1.2
zyPoePsePortTimeRangeInProfile
time-range profile name which is in profile
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.59.2.1.1.3

zyxelPoeAutoPdRecoveryPortTable

table
.1.3.6.1.4.1.890.1.15.3.59.5.2 · 1 row entry · 10 columns
Open in standard view 
The table contains Auto PD Recovery port configuration.
zyxelPoeAutoPdRecoveryPortEntry entry .1.3.6.1.4.1.890.1.15.3.59.5.2.1
The entry contains Auto PD Recovery port configuration.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
zyPoeAutoPdRecoveryPortState
Enable or disable Auto PD Recovery on specific port.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.1
zyPoeAutoPdRecoveryPortMode
Auto PD Recovery mode. Default value is LLDP(1).
Enumerationr/w
Enumerated Values:
1lldp
2ping
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.2
zyPoeAutoPdRecoveryPortIpAddressType
The address type of zyPoeAutoPdRecoveryPortIpAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.3
zyPoeAutoPdRecoveryPortIpAddress
PD IP address.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.4
zyPoeAutoPdRecoveryPollingInterval
Time interval between each ping request to PD. Default value is 20 (seconds).
Integer32r/w
Constraints:
range: 10-300
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.5
zyPoeAutoPdRecoveryPortPollingCount
Number of retry times when detect fail. Default value is 3 (times).
Integer32r/w
Constraints:
range: 2-5
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.6
zyPoeAutoPdRecoveryPortAction
Action will be applied if PD without any response. Default value is reboot-alarm(1)
Enumerationr/w
Enumerated Values:
1reboot-alarm
2alarm
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.7
zyPoeAutoPdRecoveryPortResumePollingInterval
PD reboot waiting time. Default value is 600 (seconds).
Integer32r/w
Constraints:
range: 60-800
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.8
zyPoeAutoPdRecoveryPortPdRebootCount
PD reboot count. Default value is 1 (time).
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.9
zyPoeAutoPdRecoveryPortResumePowerInterval
Set delay time to resume the PoE power supply. Default value is 10 (seconds).
Integer32r/w
Constraints:
range: 5-120
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.10