ZYXEL-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
13

zyxelPortTable

table
.1.3.6.1.4.1.890.1.15.3.61.1.1 · 1 row entry · 7 columns
Open in standard view 
The table contains port configuration.
zyxelPortEntry entry .1.3.6.1.4.1.890.1.15.3.61.1.1.1
An entry contains port configuration.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
zyPortSpeedDuplex
Select The speed and the duplex mode of the Ethernet connection on this port. Selecting Auto
(auto-negotiation) allows one port to negotiate with a peer port automatically to obtain the
connection speed and duplex mod…
Enumerationr/w
Enumerated Values:
0auto
1speed10Half
2speed10Full
3speed100Half
4speed100Full
5speed1000Full
6speed10GFull
7speed12GFull
8speed40GFull
9speedAuto1000
10speedAuto10G
11speed2500Full
12speed5GFull
13speed10an
14speed100an
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.1
zyPortFlowControlState
Enable/Disable the flow control on this port. A concentration of traffic on a port decreases port
bandwidth and overflows buffer memory causing packet discards and frame losses. Flow control is used
to regulate transm…
Enumerationr/w
Enumerated Values:
1tx-rx
2disable
3tx
4rx
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.2
zyPortName
Enter a descriptive name that identifies this port.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.3
zyPortIntrusionLockState
Enable/Disable intrusion lock on the port(s) and the port cannot be connected again after you
disconnected the cable.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.4
zyPortCX4CableLength
Set the number of meters for the length of the 10GBASE-CX4 cable you use to connect between the swtich
and another switch for stacking.
Enumerationr/w
Enumerated Values:
0halfMeters
1oneMeters
2threeMeters
3fiveMeters
4tenMeters
5fifteenMeters
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.5
zyPort10GMediaType
Set the 10GBase media type.
Enumerationr/w
Enumerated Values:
0sfpPlus
1dac10g
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.6
zyPortExtendRangeState
Enable/Disable the extend-range mode on this port.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.7

zyxelPortInfoTable

table
.1.3.6.1.4.1.890.1.15.3.61.2.1 · 1 row entry · 6 columns
Open in standard view 
The table contains port information.
zyxelPortInfoEntry entry .1.3.6.1.4.1.890.1.15.3.61.2.1.1
An entry contains port information.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
zyPortModuleType
This entry displays the speed type of modular.
Enumeration
Enumerated Values:
0fastEthernet
1gigabitEthernet
2xgEthernet10000
3x1Ethernet40000
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.1
zyPortLinkUpType
The entry shows the linkUp cable type (copper, fiber, xfp or cx4) for the combo ports.
Enumeration
Enumerated Values:
0down
1copper
2fiber
3xfp
4cx4
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.2
zyPortTestStatus
This entry displays latest loopback test status of port while performing loopback test.
Enumeration
Enumerated Values:
0none
1underTesting
2success
3fail
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.3
zyPortCounterReset
Enable this entry can reset port counter record.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.4
zyPortUtilizationRx
This entry display the percentage of port utilization per second received on this port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.5
zyPortUtilizationTx
This entry display the percentage of port utilization per second transmitted on this port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.6