ZYXEL-ERR-DISABLE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
9

zyxelErrdisableRecoveryReasonTable

table
.1.3.6.1.4.1.890.1.15.3.24.1.1.2 · 1 row entry · 3 columns
Open in standard view 
The table contains errdisable recovery reason configuration.
zyxelErrdisableRecoveryReasonEntry entry .1.3.6.1.4.1.890.1.15.3.24.1.1.2.1
An entry contains errdisable recovery reason configuration.
Indexes
zyErrdisableRecoveryReasonType
Column Syntax OID
zyErrdisableRecoveryReasonType
This entry displays the supported features that allow the switch to shut down
a port or discard packets on a port according to the feature requirements and
what action you configure.
Enumeration
Enumerated Values:
0loopGuard
1arp
2bpdu
3igmp
4antiArpScan
5bpduGuard
6zuld
 .1.3.6.1.4.1.890.1.15.3.24.1.1.2.1.1
zyErrdisableRecoveryReasonState
Enable/Disable this entry to allow/prohibit the switch to activate a port
after the specified time interval, which is shut down by the supported feature.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.24.1.1.2.1.2
zyErrdisableRecoveryReasonInterval
Enter the number of seconds (from 30 to 2592000) for the switch to wait before
enabling the port which was shut down.
Integer32r/w
Constraints:
range: 30-2592000
 .1.3.6.1.4.1.890.1.15.3.24.1.1.2.1.3

zyxelErrdisableDetectReasonTable

table
.1.3.6.1.4.1.890.1.15.3.24.1.2.1 · 1 row entry · 3 columns
Open in standard view 
The table contains errdisable detect reason configuration.
zyxelErrdisableDetectReasonEntry entry .1.3.6.1.4.1.890.1.15.3.24.1.2.1.1
An entry contains errdisable detect reason configuration.
Indexes
zyErrdisableDetectReasonType
Column Syntax OID
zyErrdisableDetectReasonType
This field displays the type of control packets that may cause CPU overload.
Enumeration
Enumerated Values:
1arp
2bpdu
3igmp
 .1.3.6.1.4.1.890.1.15.3.24.1.2.1.1.1
zyErrdisableDetectReasonState
Enable/Disable the detection on switch to monitor if the configured rate limit for a specific
control packet is exceeded and take the mode selected below.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.24.1.2.1.1.2
zyErrdisableDetectReasonMode
Select the mode that the switch takes when the number of control packets exceeds the rate limit on a port, set in the CPU protection.
inactivePort - The switch disables the port on which the control packets are received…
Enumerationr/w
Enumerated Values:
1inactivePort
2inactiveReason
3rateLimitation
 .1.3.6.1.4.1.890.1.15.3.24.1.2.1.1.3

zyxelErrdisableRecoveryTable

table
.1.3.6.1.4.1.890.1.15.3.24.2.1 · 1 row entry · 3 columns
Open in standard view 
The table contains errdisable recovery information.
zyxelErrdisableRecoveryEntry entry .1.3.6.1.4.1.890.1.15.3.24.2.1.1
An entry contains errdisable recovery information.
Indexes
zyErrdisableRecoveryType zyErrdisableRecoveryPort
Column Syntax OID
zyErrdisableRecoveryType
This field displays the supported features that allow the switch to shut down a port or
discard packets on a port according to the feature requirements and what action you configure.
Enumeration
Enumerated Values:
0loopGuard
1arp
2bpdu
3igmp
4antiArpScan
5bpduGuard
6zuld
 .1.3.6.1.4.1.890.1.15.3.24.2.1.1.1
zyErrdisableRecoveryPort
This field displays which port(s) are shut down or discard packets by above reason.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.24.2.1.1.2
zyErrdisableRecoveryTimeToRecover
This field displays how long (seconds) those ports will be re-activated.
Integer32
Constraints:
range: 30-2592000
 .1.3.6.1.4.1.890.1.15.3.24.2.1.1.3