ZYXEL-ARP-INSPECTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
25

zyxelArpInspectVlanTable

table
.1.3.6.1.4.1.890.1.15.3.12.1.4 · 1 row entry · 3 columns
Open in standard view 
The table contains ARP inspection VLAN configuration.
zyxelArpInspectVlanEntry entry .1.3.6.1.4.1.890.1.15.3.12.1.4.1
An entry contains ARP inspection VLAN configuration.
Indexes
zyArpInspectVlanVid
Column Syntax OID
zyArpInspectVlanVid
The VLAN ID of each VLAN.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.890.1.15.3.12.1.4.1.1
zyArpInspectVlanState
Enable/Disable ARP inspection on the VLAN.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.12.1.4.1.2
zyArpInspectVlanLog
Specify when the switch generates log messages for receiving ARP packets from the VLAN.
None: The switch does not generate any log messages when it receives an ARP packet from the VLAN.
Deny: The switch generates log me…
Enumerationr/w
Enumerated Values:
1all
2none
3permit
4deny
 .1.3.6.1.4.1.890.1.15.3.12.1.4.1.3

zyxelArpInspectPortTable

table
.1.3.6.1.4.1.890.1.15.3.12.1.5 · 1 row entry · 3 columns
Open in standard view 
The table contains ARP inspection port configuration.
zyxelArpInspectPortEntry entry .1.3.6.1.4.1.890.1.15.3.12.1.5.1
An entry contains ARP inspection port configuration.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
zyArpInspectPortTrustState
Enable/Disable this port to be a trusted port (enable) or an untrusted port (disable).
The switch does not discard ARP packets on trusted ports for any reason.
Enumerationr/w
Enumerated Values:
1trusted
2untrusted
 .1.3.6.1.4.1.890.1.15.3.12.1.5.1.1
zyArpInspectPortRate
Specify the maximum rate (1-2048 packets per second) at which the switch receives ARP packets
from each port. The switch discards any additional ARP packets. Enter 0 to disable this limit.
Integer32r/w
Constraints:
range: 0-2048
 .1.3.6.1.4.1.890.1.15.3.12.1.5.1.2
zyArpInspectPortInterval
Enter the length (1-15 seconds) of the burst interval. The burst interval is the length of time
over which the rate of ARP packets is monitored for each port. For example, if the Rate is 15 pps
and the burst interval …
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.890.1.15.3.12.1.5.1.3

zyxelArpInspectFilterTable

table
.1.3.6.1.4.1.890.1.15.3.12.2.3 · 1 row entry · 5 columns
Open in standard view 
The table contains ARP inspection filter information.
zyxelArpInspectFilterEntry entry .1.3.6.1.4.1.890.1.15.3.12.2.3.1
An entry contains ARP inspection filter information.
Indexes
zyArpInspectFilterMacAddress zyArpInspectFilterVid
Column Syntax OID
zyArpInspectFilterMacAddress
This field displays the source MAC address in ARP inspection filter.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.890.1.15.3.12.2.3.1.1
zyArpInspectFilterVid
This field displays the source VLAN ID in ARP inspection filter.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.890.1.15.3.12.2.3.1.2
zyArpInspectFilterPort
This field displays the source port of the discarded ARP packet.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.12.2.3.1.3
zyArpInspectFilterExpiry
This field displays how long (in seconds) the ARP inspection filter remains in the switch.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.12.2.3.1.4
zyArpInspectFilterClear
This object allow entry to be deleted an ARP inspect filter entry.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.12.2.3.1.6

zyxelArpInspectLogTable

table
.1.3.6.1.4.1.890.1.15.3.12.2.4 · 1 row entry · 7 columns
Open in standard view 
The table contains ARP inspection log information.
zyxelArpInspectLogEntry entry .1.3.6.1.4.1.890.1.15.3.12.2.4.1
An entry contains ARP inspection log information.
Indexes
zyArpInspectLogMacAdderss zyArpInspectLogVid zyArpInspectLogPort zyArpInspectLogIpAddress zyArpInspectLogReasonType
Column Syntax OID
zyArpInspectLogMacAdderss
This field displays the source MAC address of the ARP packet.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.890.1.15.3.12.2.4.1.1
zyArpInspectLogVid
This field displays the source VLAN ID of the ARP packet.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.890.1.15.3.12.2.4.1.2
zyArpInspectLogPort
This field displays the source port of the ARP packet.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.12.2.4.1.3
zyArpInspectLogIpAddress
This field displays the source IP address of the ARP packet.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.15.3.12.2.4.1.4
zyArpInspectLogNumberPacket
This field displays the number of ARP packets that were consolidated into this log message.
The switch consolidates identical log messages generated by ARP packets in the log consolidation interval into one log message.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.12.2.4.1.5
zyArpInspectLogReasonType
This field displays the reason the log message was generated.
dhcp deny: An ARP packet was discarded because it violated a dynamic binding with the same MAC address and VLAN ID.
static deny: An ARP packet was discarded …
Enumeration
Enumerated Values:
1deny
2denyStatic
3denyDHCP
4permitStatic
5permitDHCP
 .1.3.6.1.4.1.890.1.15.3.12.2.4.1.6
zyArpInspectLogTime
This field displays when the log message was generated.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.12.2.4.1.7

zyxelArpInspectStatisticsTable

table
.1.3.6.1.4.1.890.1.15.3.12.2.5 · 1 row entry · 7 columns
Open in standard view 
The table contains ARP inspection statistics information.
zyxelArpInspectStatisticsEntry entry .1.3.6.1.4.1.890.1.15.3.12.2.5.1
An entry contains ARP inspection statistics information.
Indexes
zyArpInspectStatisticsVid
Column Syntax OID
zyArpInspectStatisticsVid
The VLAN ID of each VLAN.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.12.2.5.1.1
zyArpInspectStatisticsReceived
This field displays the total number of ARP packets received from the VLAN since the switch last restarted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.15.3.12.2.5.1.2
zyArpInspectStatisticsRequest
This field displays the total number of ARP Request packets received from the VLAN since the switch last restarted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.15.3.12.2.5.1.3
zyArpInspectStatisticsReply
This field displays the total number of ARP Reply packets received from the VLAN since the switch last restarted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.15.3.12.2.5.1.4
zyArpInspectStatisticsForward
This field displays the total number of ARP packets the switch forwarded for the VLAN since the switch last restarted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.15.3.12.2.5.1.5
zyArpInspectStatisticsDrop
This field displays the total number of ARP packets the switch discarded for the VLAN since the switch last restarted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.15.3.12.2.5.1.6
zyArpInspectStatisticsClear
Removes ARP inspection statistics for the specified VLAN.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.12.2.5.1.7