ZXPW-ENET-STD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
8
.1.3.6.1.4.1.3902.1015.1013.23.1.1 · 1 row entry · 8 columns
This table contains the index to the Ethernet tables
associated with this ETH PW, the VLAN configuration and
VLAN mode.
zxPwEnetEntry entry .1.3.6.1.4.1.3902.1015.1013.23.1.1.1
This table is indexed by the same index that was created
for the associated entry in the PW generic table in the

PW-STD-MIB module.
The zxPwIndex and the zxPwEnetPwInstance are used as indexes
to allow mult…
Indexes
ZXPW-STD-MIBzxPwIndex zxPwEnetPwInstance
Column Syntax OID
zxPwEnetPwInstance
If multiple rows are mapped to the same PW, this index is
used to uniquely identify the individual row.
If the value of the VLAN field is known at the time of
of row creation, the value of zxPwEnetPwVlan MAY be used
for…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.1
zxPwEnetPwVlan
This Object defines the (service delimiting) VLAN field
value on the PW. The value of 4095 MUST be used if the
object is not applicable, for example when mapping all
packets from an Ethernet port to this PW (raw mode).
VlanIdOrAnyOrNoner/w
Textual Convention: VlanIdOrAnyOrNone Integer32
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.2
zxPwEnetVlanMode
This object indicates the mode of VLAN handling between the
port or the virtual port associated with the PW and the
PW encapsulation.

- 'other' indicates an operation that is not defined by
this MIB modu…
Enumerationr/w
Enumerated Values:
0other
1portBased
2noChange
3changeVlan
4addVlan
5removeVlan
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.3
zxPwEnetPortVlan
This object defines if the mapping between the original port
(physical port or VPLS virtual port) to the PW is VLAN based
or not. In case of VLAN mapping, this object indicates the
the VLAN value on the original port.
VlanIdOrAnyOrNoner/w
Textual Convention: VlanIdOrAnyOrNone Integer32
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.4
zxPwEnetPortIfIndex
This object is used to specify the ifIndex of the Ethernet
port associated with this PW for point-to-point Ethernet
service, or the ifIndex of the virtual interface of the
VPLS instance associated with the PW if the ser…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.5
zxPwEnetPwIfIndex
If the PW is modeled as an ifIndex in the ifTable, this
object indicates the value of the ifIndex representing the
Ethernet PW on the PSN side in the Etherlike-MIB. Note that
this value may be different from the value o…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.6
zxPwEnetRowStatus
This object enables creating, deleting and modifying this row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.7
zxPwEnetStorageType
This object indicates the storage type of this row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
.1.3.6.1.4.1.3902.1015.1013.23.1.1.1.8