ZTE-BFD-MIB Table View

This object contains an index used to represent a
unique BFD session on this device.

This object contains an index used to indicate
a local application which owns or maintains this
BFD session.

The Init Mode of the BFD session.

This object specifies the local discriminator for this BFD
session, used to uniquely identify it.

This object specifies the session discriminator chosen
by the remote system for this BFD session.

The source UDP Port for BFD.

The perceived state of the BFD session.

This object specifies status of BFD packet reception from
the remote system. Specifically, it is set to true(1) if
the local system is actively receiving BFD packets from the
remote system, and is set to false(0) if …

A diagnostic code specifying the local system's reason
for the last transition of the session from up(1)
to some other state.

This object specifies current operating mode that BFD
session is operating in.

This object indicates that the local system's
desire to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(0) if not

This object indicates that the local system's
desire to use Echo mode. Specifically, it is set
to true(1) if the local system wishes to use
Echo mode or false(0) if not

This object indicates that the local system's
ability to continue to function through a disruption of
the control plane. Specifically, it is set
to true(1) if the local system BFD implementation is
independent of t…

This object specifies IP address type of the neighboring IP
address which is being monitored with this BFD session.

Only values unknown(0), ipv4(1) or ipv6(2)
have to be supported.

A val…

This object specifies the local IP address which is
being associated with this BFD session.

This object specifies the neighboring IP address which is
being monitored with this BFD session.

This object specifies the FEC's destination address which is
being associated with this LDP LSP BFD session.

This object specifies the prefix length which is being associated
with this LDP LSP BFD session.

This object specifies the tunnle Id which is being monitored with
this RSVP LSP BFD session.

This object specifies the Pseudowire's remote IP address which is
being monitored with this PW BFD session.

This object specifies the Pseudowire's Vc-Id which is being monitored
with this PW BFD session.

This object specifies the Pseudowire's Vc-Ttl which is being monitored
with this PW BFD session.

This object specifies the minimum interval, in
microseconds, that the local system would like to use when
transmitting BFD Control packets.

This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting.

This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting.

This object specifies the Detect time multiplier.

This object specifies the Hold time of this BFD session.

This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(0) if not

The Authentication Type used for this BFD session. This
field is valid only when the Authentication Present bit is set

The version number of the BFD protocol that this session is
running in.

The type of this BFD session.

This object contains an interface index used to indicate
the interface which this BFD session is running on.

PW mode.

AGI element group-id value

SAII element global-id value

SAII element prefix value

TAII element global-id value

TAII element prefix value

SAII element AC-id value

TAII element AC-id value

This configures PW Fec type, fec128 by default.

This object contains an index used to represent a
unique BFD session on this device.

The total number of BFD messages received for this BFD
session.

The total number of BFD messages sent for this BFD session.

The value of sysUpTime on the most recent occasion at which
the session came up. If no such up event exists this object
contains a zero value.

The BFD diag code for the last time communication was lost
with the neighbor. If no such down event exists this object
contains a zero value.

This object specifies the minimum interval, in microseconds,
that the local system have transmitting BFD Control packets.

This object specifies the maximum interval, in microseconds,
that the local system have transmitting BFD Control packets.

This object specifies the average interval, in microseconds,
that the local system have transmitting BFD Control packets.

This object specifies the minimum interval, in microseconds,
that the local system have recieving BFD Control packets.

This object specifies the maximum interval, in microseconds,
that the local system have recieving BFD Control packets.

This object specifies the average interval, in microseconds,
that the local system have recieving BFD Control packets.

Session name

Set bfd type

BFD peer IPv4 address

If true(1) Link BFD use default ip as peer IPv4 address

BFD default multicast IPv4 address

BFD source IPv4 address

Set Link BFD out interface name

Vrf Name

BFD session local discriminator

BFD session remote discriminator

BFD session detect multiplier

BFD session min transmit packet interval

BFD session min receive packet interval