WebGraph-AnalogIO-57761-US-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
100

wtWebGraphAnalog57761SensorTable

table mandatory
.1.3.6.1.4.1.5040.1.2.28.1.2 · 1 row entry · 1 columns
Open in standard view 
List of sensors.
wtWebGraphAnalog57761SensorEntry entry .1.3.6.1.4.1.5040.1.2.28.1.2.1
List of sensor numbers.
Indexes
wtWebGraphAnalog57761SensorNo
Column Syntax OID
wtWebGraphAnalog57761SensorNo mandatory
Sensor number.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.5040.1.2.28.1.2.1.1

wtWebGraphAnalog57761ValuesTable

table mandatory
.1.3.6.1.4.1.5040.1.2.28.1.3 · 1 row entry · 1 columns
Open in standard view 
List of measurement values corresponding to the channel numbers.
wtWebGraphAnalog57761ValuesEntry entry .1.3.6.1.4.1.5040.1.2.28.1.3.1
Measurement values of the sensors.
Indexes
wtWebGraphAnalog57761SensorNo
Column Syntax OID
wtWebGraphAnalog57761Values mandatory
Measurement value of the sensor, ASCII.
This value will be translated according to the ports settings
for the read and write operations.
OctetStringr/w
Constraints:
range: 5-5
 .1.3.6.1.4.1.5040.1.2.28.1.3.1.1

wtWebGraphAnalog57761BinaryValuesTable

table mandatory
.1.3.6.1.4.1.5040.1.2.28.1.4 · 1 row entry · 1 columns
Open in standard view 
List of binary measurement values corresponding to the channel numbers.
wtWebGraphAnalog57761BinaryValuesEntry entry .1.3.6.1.4.1.5040.1.2.28.1.4.1
Binary measurement values of the sensors.
Indexes
wtWebGraphAnalog57761SensorNo
Column Syntax OID
wtWebGraphAnalog57761BinaryValues mandatory
Binary measurement value of the sensor in 1/1000,
signed number, 0x7FFFFFFF indicates an invalid value.
This value will be translated according to the ports settings
for the read and write operations.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5040.1.2.28.1.4.1.1

wtWebGraphAnalog57761ValuesPointTable

table mandatory
.1.3.6.1.4.1.5040.1.2.28.1.8 · 1 row entry · 1 columns
Open in standard view 
List of measurement values corresponding to the channel numbers.
wtWebGraphAnalog57761ValuesPointEntry entry .1.3.6.1.4.1.5040.1.2.28.1.8.1
Measurement values of the sensors.
Indexes
wtWebGraphAnalog57761SensorNo
Column Syntax OID
wtWebGraphAnalog57761ValuesPoint mandatory
Measurement value of the sensor, ASCII.
This value will be translated according to the ports settings
for the read and write operations.
OctetStringr/w
Constraints:
range: 5-5
 .1.3.6.1.4.1.5040.1.2.28.1.8.1.1

wtWebGraphAnalog57761BinaryIfTable

table mandatory
.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.2 · 1 row entry · 1 columns
Open in standard view 
Table of indices.
wtWebGraphAnalog57761BinaryIfEntry entry .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.2.1
Indices of the binary channels.
Indexes
wtWebGraphAnalog57761BinaryModeNo
Column Syntax OID
wtWebGraphAnalog57761BinaryModeNo mandatory
Number of the binary channel.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.2.1.1

wtWebGraphAnalog57761BinaryTable

table mandatory
.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3 · 1 row entry · 29 columns
Open in standard view 
Table of properties of the binary mode.
wtWebGraphAnalog57761BinaryEntry entry .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1
Binary properties.
Indexes
wtWebGraphAnalog57761BinaryModeNo
Column Syntax OID
wtWebGraphAnalog57761BinaryOperationMode mandatory
Selection of the operation mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : UDP Peer
Bit 1 : TCP Client
…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.1
wtWebGraphAnalog57761BinaryTcpServerLocalPort mandatory
Local TCP port for data exchange in this server mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual).
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.2
wtWebGraphAnalog57761BinaryTcpServerInputTrigger mandatory
Every change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless every transmission will contain all input …
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.3
wtWebGraphAnalog57761BinaryTcpServerApplicationMode mandatory
Selection of the application mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 4-7: unused
Bit 3 : OPC Device
Bit 2 : Box2Box S…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.4
wtWebGraphAnalog57761BinaryTcpClientLocalPort mandatory
Local TCP port for data exchange in this client mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual).
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.5
wtWebGraphAnalog57761BinaryTcpClientServerPort mandatory
Port number of the server. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the server port to zero.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.6
wtWebGraphAnalog57761BinaryTcpClientServerIpAddr mandatory
Ip address of the server. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the server IP address to 0.0.0.0.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.7
wtWebGraphAnalog57761BinaryTcpClientServerPassword mandatory
Building a connection may be protected by the
administrator password of the server. Enter the server password
to establish the connection, if a server administrator password
exists.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.8
wtWebGraphAnalog57761BinaryTcpClientInactivity mandatory
Connection timeout in 100ms. If no data are exchanged within the specified
time, the device closes the connection to the server.
The value 0 deactivates the timer. Using the Box2Box mode this function is
disabled.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.9
wtWebGraphAnalog57761BinaryTcpClientInputTrigger mandatory
Every change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless every transmission will contain all input …
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.10
wtWebGraphAnalog57761BinaryTcpClientInterval mandatory
Configurable interval with a 100ms base, in which the Webio device sends
data to the configured application. A interval of zero stopps the
periodical sending.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.11
wtWebGraphAnalog57761BinaryTcpClientApplicationMode mandatory
Selection of the application mode:
The OCTETS are interpreted bit-by-bit,
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused
Bit 2 : Box2Box Slave
Bit 1 : Compat…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.12
wtWebGraphAnalog57761BinaryUdpPeerLocalPort mandatory
Local UDP port for data exchange in this peer to peer mode.
This port number must be unique within the device.
Reserved port number must not be used (refere to the manual).
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.13
wtWebGraphAnalog57761BinaryUdpPeerRemotePort mandatory
Port number of the remote device. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the remote port to zero.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.14
wtWebGraphAnalog57761BinaryUdpPeerRemoteIpAddr mandatory
Ip address of the remote device. A complete set of port number, IP address
and a valid input/output mask starts this mode.
No data exchange take place when setting the remote device IP address to 0.0.0.0.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.15
wtWebGraphAnalog57761BinaryUdpPeerInputTrigger mandatory
Every change on the inputs causes their state to be transmitted to the
remote device. To minimize data traffic, individual inputs may be exempted
from this rule. Nevertheless every transmission will contain all input …
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.16
wtWebGraphAnalog57761BinaryUdpPeerInterval mandatory
Configurable interval with a 100ms base, in which the Webio device sends
data to the configured remote device. A interval of zero stopps the
periodical sending.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.17
wtWebGraphAnalog57761BinaryUdpPeerApplicationMode mandatory
Selection of the application mode:
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output.
Bit 0 corresponds to the LSB.
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4: Bit 3-7: unused…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.18
wtWebGraphAnalog57761BinaryConnectedPort mandatory
Port number of the remote device, after connection has been established.
In case of no connection or missing port informations a zero will be read.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.19
wtWebGraphAnalog57761BinaryConnectedIpAddr mandatory
IP address of the remote device, after connection has been established.
In case of no connection or missing port informations 0.0.0.0 will be read.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.20
wtWebGraphAnalog57761BinaryTcpServerClientHttpPort mandatory
HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs
status informations will be send to this port.
Not used at mode Compatible 50xxx.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.21
wtWebGraphAnalog57761BinaryTcpClientServerHttpPort mandatory
HTTP port number of the remote device at TCP Client Mode. In the operating mode
Box2Box connection status informations will be exchanged through this port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.22
wtWebGraphAnalog57761BinaryTcpServerHysteresis1 mandatory
A change greater than this value initiate a transmission of the corresponding input value.
The input 1 must be selected at wtWebGraphAnalog57761BinaryTcpServerInputTrigger.
With a hysteresis of zero any change will be t…
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.23
wtWebGraphAnalog57761BinaryTcpServerHysteresis2 mandatory
A change greater than this value initiate a transmission of the corresponding input value.
The input 2 must be selected at wtWebGraphAnalog57761BinaryTcpServerInputTrigger.
With a hysteresis of zero any change will be t…
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.24
wtWebGraphAnalog57761BinaryTcpClientHysteresis1 mandatory
A change greater than this value initiate a transmission of the corresponding input value.
The input 1 must be selected at wtWebGraphAnalog57761BinaryTcpClientInputTrigger.
With a hysteresis of zero any change will be t…
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.25
wtWebGraphAnalog57761BinaryTcpClientHysteresis2 mandatory
A change greater than this value initiate a transmission of the corresponding input value.
The input 2 must be selected at wtWebGraphAnalog57761BinaryTcpClientInputTrigger.
With a hysteresis of zero any change will be t…
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.26
wtWebGraphAnalog57761BinaryUdpPeerHysteresis1 mandatory
A change greater than this value initiate a transmission of the corresponding input value.
The input 1 must be selected at wtWebGraphAnalog57761BinaryUdpPeerInputTrigger.
With a hysteresis of zero any change will be tra…
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.27
wtWebGraphAnalog57761BinaryUdpPeerHysteresis2 mandatory
A change greater than this value initiate a transmission of the corresponding input value.
The input 2 must be selected at wtWebGraphAnalog57761BinaryUdpPeerInputTrigger.
With a hysteresis of zero any change will be tra…
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.28
wtWebGraphAnalog57761BinaryTcpClientServerUserName mandatory
Building a connection may be protected by a specific
user name within the server. Enter the user name
to establish the connection, if a user name entry
exists.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.29

wtWebGraphAnalog57761AlarmIfTable

table mandatory
.1.3.6.1.4.1.5040.1.2.28.3.1.5.2 · 1 row entry · 1 columns
Open in standard view 
List of alarm indices.
wtWebGraphAnalog57761AlarmIfEntry entry .1.3.6.1.4.1.5040.1.2.28.3.1.5.2.1
Numbers of the alarms.
Indexes
wtWebGraphAnalog57761AlarmNo
Column Syntax OID
wtWebGraphAnalog57761AlarmNo mandatory
Alarm number.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.5040.1.2.28.3.1.5.2.1.1

wtWebGraphAnalog57761AlarmTable

table mandatory
.1.3.6.1.4.1.5040.1.2.28.3.1.5.3 · 1 row entry · 49 columns
Open in standard view 
List of settings depending on the alarm number.
wtWebGraphAnalog57761AlarmEntry entry .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1
Alarm parameters of the individual alarms.
Indexes
wtWebGraphAnalog57761AlarmNo
Column Syntax OID
wtWebGraphAnalog57761AlarmTrigger mandatory
Binary coded trigger conditions:
Octet 1: unused
Octet 2: unused
Octet 3:
Bit 0: Timer
Bit 1: ColdStart
Bit 2: WarmStart

Octet 4:
Bit 0: Sensor 1
Bit 1: Sensor 2
Bit 2-7: unused
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.1
wtWebGraphAnalog57761AlarmMin1 mandatory
Minimum sensor 1 with maximum 3 decimal places.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.2
wtWebGraphAnalog57761AlarmMax1 mandatory
Maximum sensor 1 with maximum 3 decimal places.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.3
wtWebGraphAnalog57761AlarmHysteresis1 mandatory
Reading changes of this size clears the alarm state (MAX-hyst, MIN+hyst.)
with maximum 3 decimal places.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.4
wtWebGraphAnalog57761AlarmDelay mandatory
Alarm will be delayed by setting this time while stable alarm
condition occur (time in minutes).
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.5
wtWebGraphAnalog57761AlarmInterval mandatory
Send interval for alarm messages.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.6
wtWebGraphAnalog57761AlarmEnable mandatory
Binary coded alarm enable:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: Mail Enable
Bit 1: SNMP Trap enable
Bit 2: TCP Client enable
Bit 3: Syslog enable
Bit 4: FTP Client enable
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.7
wtWebGraphAnalog57761AlarmEMailAddr mandatory
E-Mail address for sending the alarm mail to.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.8
wtWebGraphAnalog57761AlarmMailSubject mandatory
Subject line for alarm mail.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.9
wtWebGraphAnalog57761AlarmMailText mandatory
Alarm mail text: <Mn> provides the current temperature; n = 1..2.
<Z> provides the current time.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.10
wtWebGraphAnalog57761AlarmManagerIP mandatory
Name or IP address of the SNMP Manager which accepts the trap.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.11
wtWebGraphAnalog57761AlarmTrapText mandatory
This text is sent in the trap body.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.12
wtWebGraphAnalog57761AlarmMailOptions mandatory
Binary coded options:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Attach Logger.csv Enable
Bit 1 : CSV-Data_since_last_report
Bit 2-7: unused
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.13
wtWebGraphAnalog57761AlarmTcpIpAddr mandatory
Name or IP address of the TCP server which accepts the trap.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.14
wtWebGraphAnalog57761AlarmTcpPort mandatory
Port number of the TCP server which accepts the trap.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.15
wtWebGraphAnalog57761AlarmTcpText mandatory
This text is sent in the TCP trap body.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.16
wtWebGraphAnalog57761AlarmClearMailSubject mandatory
Subject line for alarm clear mail.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.17
wtWebGraphAnalog57761AlarmClearMailText mandatory
Alarm clear mail text: <Mn> provides the current temperature; n = 1..2.
<Z> provides the current time.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.18
wtWebGraphAnalog57761AlarmClearTrapText mandatory
This text is sent in the trap body.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.19
wtWebGraphAnalog57761AlarmClearTcpText mandatory
This text is sent in the TCP trap body.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.20
wtWebGraphAnalog57761AlarmMin2 mandatory
Minimum sensor 2 with maximum 3 decimal places.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.21
wtWebGraphAnalog57761AlarmMax2 mandatory
Maximum sensor 2 with maximum 2 decimal places.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.22
wtWebGraphAnalog57761AlarmHysteresis2 mandatory
Hysterese rel. sensor 2 with maximum 3 decimal places.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.23
wtWebGraphAnalog57761AlarmSyslogIpAddr mandatory
IP address of the syslog server to which the Webio device should send syslog messages.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.24
wtWebGraphAnalog57761AlarmSyslogPort mandatory
Port number of the syslog server to which the Webio device should send syslog messages.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.25
wtWebGraphAnalog57761AlarmSyslogText mandatory
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.26
wtWebGraphAnalog57761AlarmSyslogClearText mandatory
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164.
This text appears in the following syslog message body of a alarm clear message.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.27
wtWebGraphAnalog57761AlarmFtpDataPort mandatory
Local data port: 1..65535 or AUTO: the next free port will be assigned.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.28
wtWebGraphAnalog57761AlarmFtpFileName mandatory
Name of the file including path informations.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.29
wtWebGraphAnalog57761AlarmFtpText mandatory
Message text to store on the FTP server.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.30
wtWebGraphAnalog57761AlarmFtpClearText mandatory
Alarm clear message to store on the FTP server.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.31
wtWebGraphAnalog57761AlarmFtpOption mandatory
Binary coded options, select only one option at the same time:
STORE = replace file
APPEND = append message at the end of the file

Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : STOR…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.32
wtWebGraphAnalog57761AlarmTimerCron mandatory
This entry defines a time window for alarm 1-8 and a activation time for the report.
A time window is definied by start and stop time stamp, seperated by a space or tab.
The activation time of the report is defined by a…
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.33
wtWebGraphAnalog57761AlarmName mandatory
Alert name
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.39
wtWebGraphAnalog57761AlarmActive mandatory
Alert active
1 = ON
0 = OFF
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.40
wtWebGraphAnalog57761AlarmHttpReqAuthEnable mandatory
Binary coded options, select only one option at the same time:
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 1-7: unused
Bit 0 : HHTP Request Authentication enable
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.61
wtWebGraphAnalog57761AlarmHttpReqAuthUser mandatory
HTTP Request: User
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.62
wtWebGraphAnalog57761AlarmHttpReqAuthPassword mandatory
HTTP Request: Password
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.63
wtWebGraphAnalog57761AlarmHttpReqSetUrl mandatory
HTTP Request: Set URL
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.64
wtWebGraphAnalog57761AlarmHttpReqClearUrl mandatory
HTTP Request: Clear URL
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.65
wtWebGraphAnalog57761AlarmHttpReqServerPort mandatory
HTTP Request: Server Port
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.66
wtWebGraphAnalog57761AlarmMqttTopicPath mandatory
MQTT Publish: Topic path
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.67
wtWebGraphAnalog57761AlarmMqttTopicSetTopic mandatory
MQTT Publish: Topic SET message
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.68
wtWebGraphAnalog57761AlarmMqttTopicClear mandatory
MQTT Publish: Topic CLEAR message
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.69
wtWebGraphAnalog57761AlarmSensorLostSelection mandatory
Binary coded options:
OCTET 1: unused
OCTET 2: unused
OCTET 3: unused
OCTET 4, Bit 1-7: unused
Bit 0 : Sensor 0
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.70
wtWebGraphAnalog57761AlarmLimitWindow mandatory
If window type is INSIDE the alarm is genereted when the temperature
is greater minumum value and lower than maximum value. If window type is OUTSIDE
the alarm is generated when the measured value is lower than the mini…
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.71
wtWebGraphAnalog57761AlarmSnmpManagerPort mandatory
Port number of the SNMP Manager to which the Webio device should send SNMP traps.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.76
wtWebGraphAnalog57761AlarmMqttQoS mandatory
Binary coded value:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0: QoS 0
Bit 1: QoS 1
Bit 2: QoS 2
Bit 3-7:unused
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.77
wtWebGraphAnalog57761AlarmMqttRetain mandatory
Binary coded value:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : retain enable
Bit 1-7 : unused
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.78

wtWebGraphAnalog57761SensorColor2Table

table mandatory
.1.3.6.1.4.1.5040.1.2.28.3.1.6.2.3 · 1 row entry · 2 columns
Open in standard view 
List of sensor colors for the praphical presentation.
wtWebGraphAnalog57761SensorColor2Entry entry .1.3.6.1.4.1.5040.1.2.28.3.1.6.2.3.1
Numbers of the sensors.
Indexes
wtWebGraphAnalog57761SensorNo
Column Syntax OID
wtWebGraphAnalog57761GraphicsSensorColor mandatory
Color of the sensors at the praphical presention.
OctetStringr/w
Constraints:
range: 3-3
 .1.3.6.1.4.1.5040.1.2.28.3.1.6.2.3.1.1
wtWebGraphAnalog57761GraphicsSelectScale mandatory
Assignes one of 4 scales to a sensor:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : Use Scale 1
Bit 1 : Use Scale 2
Bit 2-7: unused
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.1.6.2.3.1.2

wtWebGraphAnalog57761PortTable

table mandatory
.1.3.6.1.4.1.5040.1.2.28.3.2.1 · 1 row entry · 14 columns
Open in standard view 
List of settings depending on the sensor number.
wtWebGraphAnalog57761PortEntry entry .1.3.6.1.4.1.5040.1.2.28.3.2.1.1
Sensor parameters for the individual sensors.
Indexes
wtWebGraphAnalog57761SensorNo
Column Syntax OID
wtWebGraphAnalog57761PortName mandatory
Name of the sensor.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.1
wtWebGraphAnalog57761PortText mandatory
Description of the sensor.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.2
wtWebGraphAnalog57761PortOffset1 mandatory
Offset calibration: Offset in degrees with maximum 3 decimal places at set point 1.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.3
wtWebGraphAnalog57761SetPoint1 mandatory
Offset calibration: Reference set point 1 in degrees with maximum 3 decimal places.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.4
wtWebGraphAnalog57761PortOffset2 mandatory
Offset calibration: Offset in degrees with maximum 3 decimal places at set point 2.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.5
wtWebGraphAnalog57761SetPoint2 mandatory
Offset calibration: Reference set point 2 in degrees with maximum 3 decimal places.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.6
wtWebGraphAnalog57761PortComment mandatory
Offset calibration: informations of date, name of operator, reference devices.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.7
wtWebGraphAnalog57761PortSensorSelect mandatory
Binary coded options for sensor 1:
Octet 1: unused
Octet 2: unused
Octet 3: unused
Octet 4:
Bit 0 : 0-20mA (default)
Bit 1 : 4-20mA
Bit 2 : Disconnect
Bit 3-7: unused
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.8
wtWebGraphAnalog57761PortUnit mandatory
User scale: displayed unit.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.9
wtWebGraphAnalog57761PortScale0 mandatory
User scale: displayed value in 1/1000 at 0% full scale range.
Range: -999999.999 to 999999.999
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.10
wtWebGraphAnalog57761PortScale100 mandatory
User scale: displayed value in 1/1000 at 100% full scale range.
Range: -999999.999 to 999999.999
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.11
wtWebGraphAnalog57761PortOutputMode mandatory
This binary coded output mode defines the individual operation mode for any
output. More than one mode must not be selected. If an output mode is selected,
Bit 2 in wtWebGraphAnalog57761PortInputMode will be set automat…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.12
wtWebGraphAnalog57761PortInputMode mandatory
This binary coded input mode defines the individual operation mode for any
input. More than one mode must not be selected. If an input mode is selected,
Bit 5 in wtWebGraphAnalog57761PortOutputMode will be set automatic…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.13
wtWebGraphAnalog57761PortPresetValue mandatory
This value will be set after reset or initialisation.
OctetStringr/w .1.3.6.1.4.1.5040.1.2.28.3.2.1.1.16