WWP-QOS-410-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
19

wwpQos410Table

table
.1.3.6.1.4.1.6141.2.29.1.1.1 · 1 row entry · 8 columns
Open in standard view 
A Table of QOS per vlan per port Entries.
wwpQos410Entry entry .1.3.6.1.4.1.6141.2.29.1.1.1.1
The QOS per vlan per port Entry in the Table.
Indexes
wwpQos410VlanId wwpQos410IngressPortId wwpQos410EgressPortId
Column Syntax OID
wwpQos410VlanId
Vlan ID for this instance of QOS. This Vlan Id should refer to
the wwpVlanId in the WwpVlanEntry.
VlanId
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6141.2.29.1.1.1.1.1
wwpQos410IngressPortId
Ingress Port ID for this instance of. Port ID's start at 1, and are
consecutive for each additional port. This port Id should
refer to the dot1dBasePort in the Dot1dBasePortEntry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.29.1.1.1.1.2
wwpQos410EgressPortId
Egress Port ID for this instance of. Port ID's start at 1, and are
consecutive for each additional port. This port Id should
refer to the dot1dBasePort in the Dot1dBasePortEntry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.29.1.1.1.1.3
wwpQos410MinRateLimit
Bandwidth guaranteed for this QOS entry, specified in 64Kb/s increments.
The maximum value for this object is 8Gb/s, if this egress port is
the lead port of a link aggregation group. The total of all QOS entries
for …
kbpsInteger32r/w
Constraints:
range: 0-128000
 .1.3.6.1.4.1.6141.2.29.1.1.1.1.4
wwpQos410MaxRateLimit
Bandwidth limit that cannot be exceeded by this QOS entry.
The bandwidth is specified in 64Kb/s increments, with a maximum
of 8Gb/s. The value specified cannot exceed the current bandwidth
of the port. Values greater …
kbpsInteger32r/w
Constraints:
range: 1-128000
 .1.3.6.1.4.1.6141.2.29.1.1.1.1.5
wwpQos410QueueSize
The size of the queue for this QOS entry.
Enumerationr/w
Enumerated Values:
1qSize16kb
2qSize32kb
3qSize64kb
4qSize128kb
5qSize256kb
6qSize512kb
7qSize1mb
8qSize2mb
9qSize4mb
10qSize8mb
11qSize16mb
12qSize32mb
 .1.3.6.1.4.1.6141.2.29.1.1.1.1.6
wwpQos410Weight
Value that is used to determine which QOS entries
will receive the remaining bandwidth once Minimum
Bandwidth requirements have been satisfied for all
QOS entries. QOS entries with greater weight
(smaller number) wi…
Enumerationr/w
Enumerated Values:
1qw1
2qw2
3qw3
4qw4
5qw5
6qw6
7qw7
8qw8
9qw10
10qw12
11qw14
12qw16
13qw20
14qw24
15qw28
16qw32
17qw40
18qw48
19qw56
20qw64
21qw80
22qw96
23qw112
24qw128
25qw160
26qw192
27qw224
28qw256
29qw320
30qw384
31qw448
32qw512
33qw640
34qw768
35qw896
36qw1024
 .1.3.6.1.4.1.6141.2.29.1.1.1.1.7
wwpQos410RowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6141.2.29.1.1.1.1.8

wwpQos410StatsTable

table
.1.3.6.1.4.1.6141.2.29.1.1.2 · 1 row entry · 6 columns
Open in standard view 
A Table of QOS Stats per vlan per ingress/egress port Entries.
wwpQos410StatsEntry entry .1.3.6.1.4.1.6141.2.29.1.1.2.1
The QOS Stats per vlan per port Entry in the Table.
Indexes
wwpQos410StatsVlanId wwpQos410StatsIngressPortId wwpQos410StatsEgressPortId
Column Syntax OID
wwpQos410StatsVlanId
Vlan ID for this instance of QOS. This Vlan Id should refer to
the wwpVlanId in the WwpVlanEntry.
VlanId
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6141.2.29.1.1.2.1.1
wwpQos410StatsIngressPortId
Ingress Port ID for this instance of . Port ID's start at 1,
and are consecutive for each additional port. This port Id should
refer to the dot1dBasePort in the Dot1dBasePortEntry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.29.1.1.2.1.2
wwpQos410StatsEgressPortId
Egress Port ID for this instance of. Port ID's start at 1,
and are consecutive for each additional port. This port Id should
refer to the dot1dBasePort in the Dot1dBasePortEntry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.29.1.1.2.1.3
wwpQos410StatsType
Determines which type of bytes to count, accepted bytes or discarded bytes
for this QOS entry. The default will count accepted bytes.
Enumerationr/w
Enumerated Values:
1accepted
2discarded
 .1.3.6.1.4.1.6141.2.29.1.1.2.1.4
wwpQos410RxBytesHi
The number of bytes received for this QOS Entry.This counter
represents the upper 32 bits of the counter value.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.29.1.1.2.1.5
wwpQos410RxBytesLo
The number of bytes received for this QOS Entry.This counter
represents the lower 32 bits of the counter value.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.29.1.1.2.1.6

wwpQos410PriToQMapTable

table
.1.3.6.1.4.1.6141.2.29.1.1.3 · 1 row entry · 2 columns
Open in standard view 
A Table of mapping of an RX-priority to a TX-queue.
wwpQos410PriToQMapEntry entry .1.3.6.1.4.1.6141.2.29.1.1.3.1
The mapping Entry of an RX-priority to a TX-queue in the Table.
Indexes
wwpQos410RxPriority
Column Syntax OID
wwpQos410RxPriority
The RX-prioroty value for this entry.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.29.1.1.3.1.1
wwpQos410TxPriQueue
The TX-priority-queue value for this entry.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.29.1.1.3.1.2

wwpQos410PortTable

table
.1.3.6.1.4.1.6141.2.29.1.1.4 · 1 row entry · 3 columns
Open in standard view 
A Table of QOS per port Entries.
wwpQos410PortEntry entry .1.3.6.1.4.1.6141.2.29.1.1.4.1
The QOS per port Entry in the Table.
Indexes
wwpQos410PortIndex
Column Syntax OID
wwpQos410PortIndex
Port ID for this instance of. Port ID's start at 1, and are
consecutive for each additional port. This port Id should
refer to the dot1dBasePort in the Dot1dBasePortEntry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.29.1.1.4.1.1
wwpQos410PortProvisionedBW
Number of 64Kbps of bandwidth that is currently Provisioned for
this port. This value is read-only and is updated each time a
QOS entry is created for this port. If the port is a member of
a Link Agg group and is no…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6141.2.29.1.1.4.1.2
wwpQos410PortTotalBW
Number of 64Kbps of bandwidth that make up this port's total
bandwidth. This value is read-only and is updated each time a
QOS entry is created for this port. If the port is a
member of a Link Agg group and this is n…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6141.2.29.1.1.4.1.3