WWP-ENVIRON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
17
.1.3.6.1.4.1.6141.2.13.1.1.2.1 · 1 row entry · 4 columns
A list of power supply entries.
wwpEnvPowerEntry entry .1.3.6.1.4.1.6141.2.13.1.1.2.1.1
An entry in the powerTable providing objects for a
power supply.
Indexes
No indexes recorded
Column Syntax OID
wwpEnvPowerSupplyNum
Denotes the power supply.
Integer32 .1.3.6.1.4.1.6141.2.13.1.1.2.1.1.1
wwpEnvPowerSupplyState
Denotes the power supply's state.
Enumeration .1.3.6.1.4.1.6141.2.13.1.1.2.1.1.2
wwpEnvPowerSupplyType
Denotes the power supply type.
Enumeration .1.3.6.1.4.1.6141.2.13.1.1.2.1.1.3
wwpEnvPowerSupplyRedundancy
Denotes whether or not the power supply is redundant.
Enumeration .1.3.6.1.4.1.6141.2.13.1.1.2.1.1.4
.1.3.6.1.4.1.6141.2.13.1.1.3.1 · 1 row entry · 5 columns
A list of fan module entries.
wwpEnvFanModuleEntry entry .1.3.6.1.4.1.6141.2.13.1.1.3.1.1
An entry in the fan module Table providing objects for a
fan module.
Indexes
No indexes recorded
Column Syntax OID
wwpEnvFanModuleNum
Denotes the Fan module.
Integer32 .1.3.6.1.4.1.6141.2.13.1.1.3.1.1.1
wwpEnvFanModuleState
Denotes the fan modules state.
Enumeration .1.3.6.1.4.1.6141.2.13.1.1.3.1.1.2
wwpEnvFanAvgSpeed
The fans average speed in RPM. The average is calculated
on a continuous basis from system startup.
rpmInteger32 .1.3.6.1.4.1.6141.2.13.1.1.3.1.1.3
wwpEnvFanCurrentSpeed
The current speed of the fan in RPM.
rpmInteger32 .1.3.6.1.4.1.6141.2.13.1.1.3.1.1.4
wwpEnvFanMinSpeed
The minimum speed of the fan in RPM.
rpmInteger32 .1.3.6.1.4.1.6141.2.13.1.1.3.1.1.5
.1.3.6.1.4.1.6141.2.13.1.1.4.1 · 1 row entry · 5 columns
A list of Temp Sensors entries.
wwpEnvTempSensorEntry entry .1.3.6.1.4.1.6141.2.13.1.1.4.1.1
An entry in the Temp Sensor Table providing objects for a
Temp Sensor.
Indexes
No indexes recorded
Column Syntax OID
wwpEnvTempSensorNum
Denotes the Temp sensor module.
Integer32 .1.3.6.1.4.1.6141.2.13.1.1.4.1.1.1
wwpEnvTempSensorValue
The value of temperature measured by the sensor
inside the device in degrees C.
degrees CelsiusSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.13.1.1.4.1.1.2
wwpEnvTempSensorHighThreshold
The highest value that the object wwpEnvTempSensorValue
may obtain at which a wwpEnvMIBTempNotification is sent.
degrees CelsiusSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.13.1.1.4.1.1.3
wwpEnvTempSensorLowThreshold
The Lowest value that the object wwpEnvTempSensorValue
may obtain at which a wwpEnvMIBTempNotification is sent.
degrees CelsiusSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.13.1.1.4.1.1.4
wwpEnvTempSensorState
The state indicates whether the current temp is greater than,
equal to or less than the threshold state.
Enumeration .1.3.6.1.4.1.6141.2.13.1.1.4.1.1.5
.1.3.6.1.4.1.6141.2.13.1.1.5.1 · 1 row entry · 3 columns
A list of Port Power Management entries. This table affects
the port power only when the input power supply is Battery.
wwpPortPowerMgmtEntry entry .1.3.6.1.4.1.6141.2.13.1.1.5.1.1
An entry in the Port Power Mgmt Table providing objects for
Port Power Management.
Indexes
No indexes recorded
Column Syntax OID
wwpEnvPortBankId
Denotes the Port Bank module. A Bank is a set of ports
for the power management when the source of the input
power is switched to battery.
Integer32 .1.3.6.1.4.1.6141.2.13.1.1.5.1.1.1
wwpEnvPortMap
The port map associated with this BankId.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6141.2.13.1.1.5.1.1.2
wwpEnvPortBankOn
The object to decide whether the port related to this Bank
should be on or not if the input power supply is switched
to Battery.
Enumerationr/w .1.3.6.1.4.1.6141.2.13.1.1.5.1.1.3