WESTERMO-WEOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

112

lffTable

table

.1.3.6.1.4.1.16177.2.1.2.1 · 1 row entry · 3 columns

Open in standard view

Table containing Westermo Link Fail Forward (LFF) settings and status
applicable ports.
Westermo LFF is used to indicate the state (up/down) of a remote link.
The currently supported use case is when extending an Ethernet over an SHDSL link.
LFF is used to inform the local end that the Ethernet link at the remote site is
up or down.

lffEntry entry .1.3.6.1.4.1.16177.2.1.2.1.1

For each local (SHDSL) port, there is a row in the lffTable containing
LFF status and settings.

Indexes

lffPortIfIndex

Column Syntax OID

lffPortIfIndex

This index should map to the local (SHDSL) port's ifIndex in the ifTable.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.16177.2.1.2.1.1.1

lffPortIfName

This name should map to the local (SHDSL) port's ifName in the ifXTable.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.16177.2.1.2.1.1.2

lffStatus

The lffStatus shows the status of a (Ethernet) link at the remote end of a SHDSL link:
- 1 (disabled): LFF is configured 'disabled' on local (SHDSL) port.
- 2 (unknown): LFF enabled, but the state of remote (Ether…

Enumeration

Enumerated Values:

1	disabled
2	unknown
3	remoteDown
4	remoteUp

.1.3.6.1.4.1.16177.2.1.2.1.1.3

sfpDdmPortTable

table

.1.3.6.1.4.1.16177.2.1.2.2.1 · 1 row entry · 7 columns

Open in standard view

Table containing DDM diagnostics per DDM capable SFP.

sfpDdmPortEntry entry .1.3.6.1.4.1.16177.2.1.2.2.1.1

This row in the sfpDdmPortTable containing per port
SFP DDM diagnostics.

Indexes

sfpDdmPortIfIndex

Column	Syntax	OID
sfpDdmPortIfIndex This index maps to the port's ifIndex in the ifTable.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.16177.2.1.2.2.1.1.1`
sfpDdmPortIfName The system name of the port.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.16177.2.1.2.2.1.1.2`
sfpDdmPortVoltage The supply voltage of the SFP. The accuracy is better than +/-3 % and the total range of 0 - 6550 mV. The voltage is represented in mV.	Integer32 Constraints: `range: 0-6550`	`.1.3.6.1.4.1.16177.2.1.2.2.1.1.3`
sfpDdmPortTemperature Temperature of the SFP. The temperature accuracy is better than 3 degrees Celsius and the total range of -128 degrees C to +128 degrees C.	Integer32 Constraints: `range: -128-128`	`.1.3.6.1.4.1.16177.2.1.2.2.1.1.4`
sfpDdmPortBiasCurrent The transmitt bias current. The accuracy is better than +/- 10 % and the total range of 0 - 131 mA. The current is represented in uA.	Integer32 Constraints: `range: 0-131`	`.1.3.6.1.4.1.16177.2.1.2.2.1.1.5`
sfpDdmPortTxPower Transmitt power of the laser. The accuracy is better than +/-3dB and the total range of -40 to +8.2 dBm ~(0 - 6.5535 mW). The power is represented in steps of 0.01 dBm	Integer32 Constraints: `range: -4000-820`	`.1.3.6.1.4.1.16177.2.1.2.2.1.1.6`
sfpDdmPortRxPower Receiving power of the laser. The accuracy is better than +/-3dB and the total range of -40 to +8.2 dBm ~(0 - 6.5535 mW). The power is represented in steps of 0.01 dBm	Integer32 Constraints: `range: -4000-820`	`.1.3.6.1.4.1.16177.2.1.2.2.1.1.7`

bwStatsTable

table

.1.3.6.1.4.1.16177.2.1.2.3.2 · 1 row entry · 10 columns

Open in standard view

Table containing port bandwidth rates.

bwStatsEntry entry .1.3.6.1.4.1.16177.2.1.2.3.2.1

For each local port, there is a row in the bwStatsTable containing
port bandwidth rates.

Indexes

bwStatsIndex

Column Syntax OID

bwStatsIndex

The value of this object uniquely identifies this bwStats entry.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.16177.2.1.2.3.2.1.1

bwStatsEnabled

Bandwidth statistics enabled or disabled for this port.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.16177.2.1.2.3.2.1.2

bwStatsBitrateIn10s

The current average input traffic for the last 10 seconds.
This value is calculated via periodic sampling of the port counters
And will be updated at least every 10 seconds.
The unit is bits per second and this includes…

Bits per secondSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.16177.2.1.2.3.2.1.3

bwStatsBitrateOut10s

The current average output traffic for the last 10 seconds.
This value is calculated via periodic sampling of the port counters
And will be updated at least every 10 seconds.
The unit is bits per second and this include…

Bits per secondSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.16177.2.1.2.3.2.1.4

bwStatsBitrateIn1m

The current moving average input traffic for the last minute.
This value is calculated and updated at least every 10 seconds.
The unit is bits per second and this includes Ethernet
header data (Ethernet preamble not inc…

Bits per secondSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.16177.2.1.2.3.2.1.5

bwStatsBitrateOut1m

The current moving average output traffic for the last minute.
This value is calculated and updated at least every 10 seconds.
The unit is bits per second and this includes Ethernet
header data (Ethernet preamble not in…

Bits per secondSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.16177.2.1.2.3.2.1.6

bwStatsBitrateIn10m

The current moving average input traffic for the last 10 minutes.
This value is calculated and updated at least every 10 seconds.
The unit is bits per second and this includes Ethernet
header data (Ethernet preamble not…

Bits per secondSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.16177.2.1.2.3.2.1.7

bwStatsBitrateOut10m

The current moving average output traffic for the last 10 minutes.
This value is calculated and updated at least every 10 seconds.
The unit is bits per second and this includes Ethernet
header data (Ethernet preamble no…

Bits per secondSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.16177.2.1.2.3.2.1.8

bwStatsBitrateIn1h

The current moving average input traffic for the last hour.
This value is calculated and updated at least every 10 seconds.
The unit is bits per second and this includes Ethernet
header data (Ethernet preamble not inclu…

Bits per secondSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.16177.2.1.2.3.2.1.9

bwStatsBitrateOut1h

The current moving average output traffic for the last hour.
This value is calculated and updated at least every 10 seconds.
The unit is bits per second and this includes Ethernet
header data (Ethernet preamble not incl…

Bits per secondSNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.16177.2.1.2.3.2.1.10

l2QosVlanTable

table

.1.3.6.1.4.1.16177.2.1.3.2.1 · 1 row entry · 3 columns

Open in standard view

Table containing VLAN priority settings for
existing VLANs.

l2QosVlanEntry entry .1.3.6.1.4.1.16177.2.1.3.2.1.1

The row in the l2QosVlanTable containing per VLAN
priority settings.

Indexes

l2QosVlanId

Column Syntax OID

l2QosVlanId

This index should be mapped to the VLAN ID of Q-bridge MIB.

Q-BRIDGE-MIBVlanId

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.16177.2.1.3.2.1.1.1

vlanPriorityEnabled

Enable (true) or disable (false) VLAN priority for this VLAN.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.16177.2.1.3.2.1.1.2

vlanPriorityLevel

The VLAN priority level for this VLAN.
0 is lowest and 7 is highest priority.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.16177.2.1.3.2.1.1.3

l2QosPortTable

table

.1.3.6.1.4.1.16177.2.1.3.2.2 · 1 row entry · 4 columns

Open in standard view

Table containing per port piority settings for LAN ports

l2QosPortEntry entry .1.3.6.1.4.1.16177.2.1.3.2.2.1

The row in the l2QosPortTable containing per port
priority settings.

Indexes

l2QosPortIfIndex

Column Syntax OID

l2QosPortIfIndex

This index should map to the port's ifIndex in the ifTable.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.16177.2.1.3.2.2.1.1

l2QosPortIfName

This name should map to the port's ifName in the ifXTable.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.16177.2.1.3.2.2.1.2

l2QosPortPriorityMode

The priority mode (tag, ip or port) to be used on this specific port.
1. (tag): Use the incoming packet's VLAN tag priority value to determine
its priority. (Untagged packets will have their priority based on
the config…

Enumerationr/w

Enumerated Values:

1	tag
2	ip
3	port

.1.3.6.1.4.1.16177.2.1.3.2.2.1.3

l2QosPortPriorityLevel

The port priority level for this port. 0 is lowest and 7 is highest priority.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.16177.2.1.3.2.2.1.4

frntv0Table

table

.1.3.6.1.4.1.16177.2.1.3.3.1.1 · 1 row entry · 11 columns

Open in standard view

Table containing a list of FRNTv0 instances/rings.

frntv0Entry entry .1.3.6.1.4.1.16177.2.1.3.3.1.1.1

The row in the frntv0Table containing settings and status information
for a specific FRNTv0 instance/ring.

Indexes

frntv0InstanceId

Column Syntax OID

frntv0InstanceId

The instance id of this FRNTv0 Ring
(only of local significance to this unit).

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.16177.2.1.3.3.1.1.1.1

frntv0FocalPointEnabled

True(1) if this unit is configured as focal point for this FRNTv0 instance.
False(2) if this unit is configured as member switch for this FRNTv0 instance.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.16177.2.1.3.3.1.1.1.2

frntv0Port1

Name of FRNT port M in the FRNT port pair.
In case the unit is configured as focal point and the ring is fully connected,
it is port M that is put in BLOCKING.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.16177.2.1.3.3.1.1.1.3

frntv0Port2

Name of FRNT port N in the FRNT port pair. In case of an edge in a FRNT bus
rather than a node in a FRNT ring then port N shall be set to 'None' and it
will be read as 'None'. In case the unit is configured as focal poi…

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.16177.2.1.3.3.1.1.1.4

frntv0Port1State

Provides information about the status of FRNT port M.
See frntv0RingStatus for more details.

Enumeration

Enumerated Values:

1	disabled
2	blocking
4	learning
5	forwarding

.1.3.6.1.4.1.16177.2.1.3.3.1.1.1.5

frntv0Port2State

Provides information about the status of FRNT port N.
See frntv0RingStatus for more details.

Enumeration

Enumerated Values:

1	disabled
2	blocking
4	learning
5	forwarding

.1.3.6.1.4.1.16177.2.1.3.3.1.1.1.6

frntv0RingStatus

Read ring status information. The answer is to be interpreted
differently when asking a focal point or a member switch.

Focal point (status of the whole FRNT topology):
1. ring mode: A focal point reports…

Enumeration

Enumerated Values:

1	ring
2	bus

.1.3.6.1.4.1.16177.2.1.3.3.1.1.1.7

frntv0RowStatus

This object indicates the status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.16177.2.1.3.3.1.1.1.8

frntv0TopologyChangeCount

This object indicates the number of transitions between bus/ring mode
since FRNT was enabled.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.3.1.1.1.9

frntv0TopologyTimeSinceLastChange

This object indicates the time that have passed since the last change of
ring status.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.16177.2.1.3.3.1.1.1.10

frntv0PortsSwapped

FRNT can detect if the FRNT ports have been swapped. For example if port1
is connected to port1 on another FRNT unit.
True(1) if the ports are swapped.
False(2) if the ports are not swapped.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.16177.2.1.3.3.1.1.1.11

igmpSnoopingVlanTable

table

.1.3.6.1.4.1.16177.2.1.3.4.5 · 1 row entry · 2 columns

Open in standard view

A list of configuration entries for VLAN specific IGMP Snooping objects.

igmpSnoopingVlanEntry entry .1.3.6.1.4.1.16177.2.1.3.4.5.1

An IGMP Snooping VLAN entry contains IGMP Snooping objects relevant for
IGMP Snooping management per VLAN.

Indexes

igmpSnoopingVlanId

Column Syntax OID

igmpSnoopingVlanId

This index should match corresponding VLAN ID of Q-bridge MIB.

Q-BRIDGE-MIBVlanId

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.16177.2.1.3.4.5.1.1

igmpSnoopingEnabled

IGMP Snooping enabled or disabled on this particular VLAN.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.16177.2.1.3.4.5.1.2

riCoStatusTable

table

.1.3.6.1.4.1.16177.2.1.3.5.1 · 1 row entry · 5 columns

Open in standard view

Table containing status for a list of RiCo and/or Dual Homing
instances present on this unit.

riCoStatusEntry entry .1.3.6.1.4.1.16177.2.1.3.5.1.1

Row in the riCoStatusTable that is containing settings and
status information for a specific RiCo/Dual-Homing instance.

Indexes

riCoStatusRingIdx riCoStatusCouplingIdx riCoStatusNodeId

Column	Syntax	OID
riCoStatusRingIdx The ring instance ID of this RiCo/Dual-Homing instance (only of local significance to this unit). - For RiCo instances, the ring ID corresponds to the associated FRNT ring ID. - For Dual Homing instances, the ring ID is…	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.16177.2.1.3.5.1.1.1`
riCoStatusCouplingIdx The ID of this RiCo/Dual-Homing instance. (only of local significance to this unit). Unique per ring instance (riCoStatusRingIdx).	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.16177.2.1.3.5.1.1.2`
riCoStatusNodeId The unique ID of this RiCo node. A MAC address (typically the base MAC address) of this unit.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.16177.2.1.3.5.1.1.3`
riCoStatusHelloInterval Configured RiCo Ring Hello interval in milliseconds. Not applicable for Dual Homing instances (value '0')	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.16177.2.1.3.5.1.1.4`
riCoStatusHelloEffective Effective RiCo Ring Hello interval in milliseconds. Shows negotiated Hello interval. Not applicable for Dual Homing instances (value '0').	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.16177.2.1.3.5.1.1.5`

riCoStatusUplinkTable

table

.1.3.6.1.4.1.16177.2.1.3.5.2 · 1 row entry · 14 columns

Open in standard view

Table containing status of RiCo and Dual-Homing uplinks per link

riCoStatusUplinkEntry entry .1.3.6.1.4.1.16177.2.1.3.5.2.1

The row in the riCoStatusUplinkTable containing status information
for a specific RiCo or Dual-Homing uplink. For RiCo, status
for all local uplinks, and for the best uplink of each RiCo
peer is listed. For dual-homing,…

Indexes

riCoStatusUplinkRingIdx riCoStatusUplinkCouplingIdx riCoStatusUplinkNodeId riCoStatusUplinkIfIndex

Column Syntax OID

riCoStatusUplinkRingIdx

The ring instance ID of this RiCo/Dual-Homing instance
(only of local significance to this unit).
- For RiCo instances, the ring ID corresponds to the
associated FRNT ring ID.
- For Dual Homing instances, the ring I…

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.16177.2.1.3.5.2.1.1

riCoStatusUplinkCouplingIdx

The instance id of this riCo Uplink

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.16177.2.1.3.5.2.1.2

riCoStatusUplinkNodeId

The unique ID of the node, i.e., the MAC address of the
node. For RiCo, this can be the (base) MAC of the local unit,
or the MAC identifying a peer RiCo node. For
Dual-Homing, this is the (base) MAC of the local unit.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.16177.2.1.3.5.2.1.3

riCoStatusUplinkIfIndex

The interface index of the uplink port.
- For local uplinks, this index corresponds to the port's
index in the ifTable (IF-MIB).
- For non-local uplinks, the value is not valid (value '0').

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.2.1.4

riCoStatusUplinkStatus

Uplink active (1), backup (2) or down (3).

Enumeration

Enumerated Values:

1	active
2	backup
3	down

.1.3.6.1.4.1.16177.2.1.3.5.2.1.5

riCoStatusUplinkIfName

The name of the interface used for this uplink.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.16177.2.1.3.5.2.1.6

riCoStatusUplinkPrio

Effective priority of this uplink. Based on configured
priority and 'adjust' value (sticky uplink).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.2.1.7

riCoStatusUplinkPathCost

Current path cost for this uplink.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.2.1.8

riCoStatusUplinkHelloInterval

Configured Ring Hello Interval for the RiCo node of this
uplink. Not valid for Dual-Homing, value '0')

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.2.1.9

riCoStatusUplinkHelloIntervalEffective

Effective Ring Hello Interval for the RiCo node of this
uplink. Not valid for Dual-Homing, value '0')

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.2.1.10

riCoStatusUplinkChangedCounter

Number of times this uplink changed its state

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.2.1.11

riCoStatusUplinkSynchronized

Synchronization status for this uplink:
- synchronized(1): Synchronize enabled and ok
- notSynchronized(2): Synchronize enabled and fails
- notApplicable(3): Non-local RiCo uplink, or Dual-Homing
uplink where Synchr…

Enumeration

Enumerated Values:

1	synchronized
2	notSynchronized
3	notApplicable

.1.3.6.1.4.1.16177.2.1.3.5.2.1.12

riCoStatusUplinkPreferred

Preferred uplink status.
Only valid for Dual-Homing uplinks whit synchronization enabled.
- preferred(1): Dual-Homing uplink has status 'Preferred'
- notPreferred(2): Dual-Homing uplink has status 'Not Preferred'
- notA…

Enumeration

Enumerated Values:

1	preferred
2	notPreferred
3	notApplicable

.1.3.6.1.4.1.16177.2.1.3.5.2.1.13

riCoStatusUplinkLocal

Local(true) or global(false) instance

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.16177.2.1.3.5.2.1.14

riCoCfgTable

table

.1.3.6.1.4.1.16177.2.1.3.5.3 · 1 row entry · 6 columns

Open in standard view

Table containing a list of RiCo couplings.

riCoCfgEntry entry .1.3.6.1.4.1.16177.2.1.3.5.3.1

The row in the riCoTable containing settings for a specific
RiCo or Dual-Homing instance.

Indexes

riCoCfgRingIdx riCoCfgCouplingIdx

Column Syntax OID

riCoCfgRingIdx

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.16177.2.1.3.5.3.1.1

riCoCfgCouplingIdx

The ID of this RiCo/Dual-Homing instance.
(only of local significance to this unit).
Unique per ring instance (riCoCfgRingIdx).

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.16177.2.1.3.5.3.1.2

riCoCfgEnabled

Enable or disable the RiCo instance
True (1) or False (2)

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.16177.2.1.3.5.3.1.3

riCoCfgHelloInterval

Configured RiCo Ring Hello interval in milliseconds.
- Default: 100 milliseconds
- Configurable in range: 50-1000 milliseconds
- Not applicable for Dual Homing instances (value '0')

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.3.1.4

riCoCfgSynchronize

Enable/disable Uplink synchronization. 'True' to enable,
and 'False' to disable synchronization.
Note: Only configurable for Dual-Homing Uplinks. For RiCo
Uplinks, synchronization is always enabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.16177.2.1.3.5.3.1.5

riCoCfgRowStatus

This object indicates the status of this table entry.
This object can also be used to create or delete instances.
At most 1 RiCo instance and at most 8 Dual-Homing instances
can be created.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.16177.2.1.3.5.3.1.6

riCoCfgUplinkTable

table

.1.3.6.1.4.1.16177.2.1.3.5.4 · 1 row entry · 8 columns

Open in standard view

Table containing RiCo and Dual-Homing uplinks and
corresponding settings per link.

riCoCfgUplinkEntry entry .1.3.6.1.4.1.16177.2.1.3.5.4.1

The row in the riCoLinkTable containing settings and status information
for a specific RiCo or Dual-Homing Uplink.

Indexes

riCoCfgRingIdx riCoCfgCouplingIdx riCoCfgUplinkIfIndex

Column Syntax OID

riCoCfgUplinkRingIdx

The ring instance ID of this RiCo/Dual-Homing instance
(only of local significance to this unit).
- For RiCo instances, the ring ID corresponds to the associated FRNT ring ID.
- For Dual Homing instances, the ring ID is…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.16177.2.1.3.5.4.1.1

riCoCfgUplinkCouplingIdx

The ID of this RiCo/Dual-Homing instance.
(only of local significance to this unit).
Unique per ring instance (riCoStatusRingIdx).

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.16177.2.1.3.5.4.1.2

riCoCfgUplinkIfIndex

The interface index of the uplink port.
For local uplinks, this index corresponds to the port's
index in the ifTable (IF-MIB).

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.4.1.3

riCoCfgUplinkPrio

Configure priority for this uplink (128 as default).
A lower value increases the chance to be elected as active
uplink.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.4.1.4

riCoCfgUplinkAdjust

Configure adjust value for this uplink (sticky uplink).
The effictive priority is reduced by the adjust value if the
link becomes elected as active uplink. Default '0'.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.4.1.5

riCoCfgUplinkEchoTime

Uplink echo interval to be set for this uplink in
milliseconds. Default: 200 ms Range: 20-1000 ms

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.4.1.6

riCoCfgUplinkPathCost

Path-cost to be set for this uplink. '0' means 'Auto', which
lets path cost depend on speed and duplex of the uplink.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.5.4.1.7

riCoCfgUplinkRowStatus

This object indicates the status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.16177.2.1.3.5.4.1.8

lldpCtlvTable

table

.1.3.6.1.4.1.16177.2.1.3.6.1 · 1 row entry · 5 columns

Open in standard view

The LLDP custom TLV (Type 127) configuration table

lldpCtlvEntry entry .1.3.6.1.4.1.16177.2.1.3.6.1.1

A custom TLV entry.

Indexes

lldpCtlvIdx

Column Syntax OID

lldpCtlvIdx

Index of this custom TLV. Only of local significance.

Integer32

Constraints:
range: 1-60

.1.3.6.1.4.1.16177.2.1.3.6.1.1.1

lldpCtlvOui

Organizationally unique identifier (OUI), 3 hex-encoded
bytes. Required.

OctetStringr/w

.1.3.6.1.4.1.16177.2.1.3.6.1.1.2

lldpCtlvSubType

Organizationally defined subtype, one byte. Default: 0

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.16177.2.1.3.6.1.1.3

lldpCtlvInfo

Information/value part of custom TLV. 0-507 octets encoded as
hex. Default: Empty

OctetStringr/w

.1.3.6.1.4.1.16177.2.1.3.6.1.1.4

lldpCtlvRowStatus

This object indicates the status of this table entry. Used to
create or delete a custom TLV entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.16177.2.1.3.6.1.1.5

lldpCtlvPortTable

table

.1.3.6.1.4.1.16177.2.1.3.6.2 · 1 row entry · 3 columns

Open in standard view

Table specifying which custom TLV(s) to transmit per
port. Each row in the table maps a custom TLV to a port. Each
custom TLV in the lldpCtlvTable can be mapped to one or more
ports.

lldpCtlvPortEntry entry .1.3.6.1.4.1.16177.2.1.3.6.2.1

Each entry maps a custom TLV to a port.

Indexes

lldpCtlvPortIdx lldpCtlvIdx

Column Syntax OID

lldpCtlvPortIdx

The logical number of the port. This is the same
number as the dot1dBasePort (dot1dBasePortTable of BRIDGE-MIB) for
this port.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.16177.2.1.3.6.2.1.1

lldpCtlvPortCtlvIdx

Custom TLV index (lldpCtlvTable)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.16177.2.1.3.6.2.1.2

lldpCtlvPortRowStatus

This object indicates the status of this table entry. Used to
create or delete a 'custom TLV to port' mapping.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.16177.2.1.3.6.2.1.3

lldpRemCtlvTable

table

.1.3.6.1.4.1.16177.2.1.3.6.3 · 1 row entry · 5 columns

Open in standard view

Table listing all custom TLV(s) received. Each entry
represents a custom TLV received on a specific port from
individual neighbours. Entries are
removed when the TTL of the LLDP message expires, and will be
removed/replaced when a new LLDP message from the same neighbour
is received.

lldpRemCtlvEntry entry .1.3.6.1.4.1.16177.2.1.3.6.3.1

Custom TLV received on a port.

Indexes

lldpRemCtlvLocalPort lldpRemCtlvMacAddress lldpRemCtlvOui lldpRemCtlvSubType

Column	Syntax	OID
lldpRemCtlvLocalPort The logical number of the local port receiving this custom TLV. This is the same number as the dot1dBasePort (dot1dBasePortTable of BRIDGE-MIB) for this port.	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.16177.2.1.3.6.3.1.1`
lldpRemCtlvMacAddress The MAC address of the neighbour node sending this custom TLV.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.16177.2.1.3.6.3.1.2`
lldpRemCtlvOui Organizationally unique identifier (OUI), 3 hex-encoded bytes.	OctetString Constraints: `range: 3-3`	`.1.3.6.1.4.1.16177.2.1.3.6.3.1.3`
lldpRemCtlvSubType Organizationally defined subtype, one byte.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.16177.2.1.3.6.3.1.4`
lldpRemCtlvInfo Information/value part of custom TLV. 0-507 octets encoded as hex.	OctetString	`.1.3.6.1.4.1.16177.2.1.3.6.3.1.5`

inet4BaseIfaceTable

table

.1.3.6.1.4.1.16177.2.1.4.1.2.2 · 1 row entry · 3 columns

Open in standard view

Table containing base IPv4 settings per interface

inet4BaseIfaceEntry entry .1.3.6.1.4.1.16177.2.1.4.1.2.2.1

Entry in ipv4Interface table. Each row holds IPv4 settings
specific to this interface.

Indexes

inet4BaseIfIndex

Column Syntax OID

inet4BaseIfIndex

Uniquely identifies an interface; same interface as identied by the
same value of ifIndex in the interfaces group.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.16177.2.1.4.1.2.2.1.1

inet4BaseIfName

The name matches the corresponding ifName in the ifXTable.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.16177.2.1.4.1.2.2.1.2

inet4BaseAddressMode

The IPv4 address assignment mode.

Enumerationr/w

Enumerated Values:

1	static
2	dhcp

.1.3.6.1.4.1.16177.2.1.4.1.2.2.1.3

inet4StaticTable

table

.1.3.6.1.4.1.16177.2.1.4.1.2.3 · 1 row entry · 4 columns

Open in standard view

Table containing settings for static IPv4 interfaces

inet4StaticEntry entry .1.3.6.1.4.1.16177.2.1.4.1.2.3.1

Entry in ipv4Interface table. Each row holds IPv4 settings specific
to this interface.

Indexes

inet4StatIfIndex

Column	Syntax	OID
inet4StatIfIndex Uniquely identifies an interface; same interface as identied by the same value of ifIndex in the interfaces group.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.16177.2.1.4.1.2.3.1.1`
inet4StatIfName The name matches the corresponding ifName in the ifXTable.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.16177.2.1.4.1.2.3.1.2`
inet4StatAddress Statically configured IPv4 address for this interface. Address 0.0.0.0 means that the interface is disabled.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.16177.2.1.4.1.2.3.1.3`
inet4StatNetmask Netmask of statically assigned IP address.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.16177.2.1.4.1.2.3.1.4`

inet4DhcpTable

table

.1.3.6.1.4.1.16177.2.1.4.1.2.4 · 1 row entry · 3 columns

Open in standard view

Table containing settings for IPv4 interfaces using DHCP for
address assignment

inet4DhcpEntry entry .1.3.6.1.4.1.16177.2.1.4.1.2.4.1

Entry in inet4Dhcp table. Each row holds DHCP settings specific
to this interface.

Indexes

inet4DhcpIfIndex

Column	Syntax	OID
inet4DhcpIfIndex Uniquely identifies an interface; same interface as identied by the same value of ifIndex in the interfaces group.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.16177.2.1.4.1.2.4.1.1`
inet4DhcpIfName The name matches the corresponding ifName in the ifXTable.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.16177.2.1.4.1.2.4.1.2`
inet4DhcpClientId Client ID passed by DHCP client to DHCP server.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.16177.2.1.4.1.2.4.1.3`

addressConflictTable

table

.1.3.6.1.4.1.16177.2.1.4.1.4.2 · 1 row entry · 7 columns

Open in standard view

A list containing all IP and MAC address conflicts currently
on the this device

addressConflictEntry entry .1.3.6.1.4.1.16177.2.1.4.1.4.2.1

An entry containing details for the conflict

Indexes

addressConflictIndex

Column Syntax OID

addressConflictIndex

A unique value for each conflict.

Integer32

Constraints:
range: 0-256

.1.3.6.1.4.1.16177.2.1.4.1.4.2.1.1

addressConflictIfIndex

Index of the interface on this device.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.16177.2.1.4.1.4.2.1.2

addressConflictIfName

Name of the interface on this device.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.16177.2.1.4.1.4.2.1.3

addressConflictType

Type of conflict:
1 : IP,
2 : MAC,
3 : IP & MAC

Enumeration

Enumerated Values:

1	ip
2	mac
3	ipAndMac

.1.3.6.1.4.1.16177.2.1.4.1.4.2.1.4

addressConflictMacAddress

The MAC address of the conflicting peer.

SNMPv2-TCPhysAddress

Textual Convention: SNMPv2-TCPhysAddress OctetString

.1.3.6.1.4.1.16177.2.1.4.1.4.2.1.5

addressConflictIPv4Address

The IPv4 address of the conflicting peer.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.16177.2.1.4.1.4.2.1.6

addressConflictTime

Time (in seconds) elapsed since conflict was last detected.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.16177.2.1.4.1.4.2.1.7

trapHostTable

table

.1.3.6.1.4.1.16177.2.1.5.1.1.2 · 1 row entry · 4 columns

Open in standard view

A list of SNMP trap host.

trapHostEntry entry .1.3.6.1.4.1.16177.2.1.5.1.1.2.1

An entry containing information about a specific SNMP trap host.

Indexes

trapHostId

Column Syntax OID

trapHostId

The id of this SNMP Trap Host
(only of local significance to this unit).

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.16177.2.1.5.1.1.2.1.1

trapHostAddressType

The type of Internet address by which the trap host
is reachable.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.16177.2.1.5.1.1.2.1.2

trapHostAddress

The IP address or Domain name for the trap host.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.16177.2.1.5.1.1.2.1.3

trapHostRowStatus

This object indicates the status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.16177.2.1.5.1.1.2.1.4

alarmStatusTable

table

.1.3.6.1.4.1.16177.2.1.5.2.4 · 1 row entry · 5 columns

Open in standard view

The status for alarm triggers.

alarmStatusEntry entry .1.3.6.1.4.1.16177.2.1.5.2.4.1

An entry containing information about a specific alarm trigger.

Indexes

alarmStatusTriggerId

Column Syntax OID

alarmStatusTriggerId

The id of alarm trigger

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.16177.2.1.5.2.4.1.1

alarmStatusTriggerType

A text string containing description about the trigger type

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.16177.2.1.5.2.4.1.2

alarmStatusTriggerEnabled

Indicates if the trigger is enabled or not

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.16177.2.1.5.2.4.1.3

alarmStatusTriggerStatus

The actual alarm status for the trigger

Enumeration

Enumerated Values:

1	warning
2	ok

.1.3.6.1.4.1.16177.2.1.5.2.4.1.4

alarmStatusTriggerStatusReason

A text string containing status reason

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.16177.2.1.5.2.4.1.5