VPLS-GENERIC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
30

vplsConfigTable

table
.1.3.6.1.2.1.10.274.1.2 · 1 row entry · 14 columns
Open in standard view 
This table specifies information for configuring
and monitoring Virtual Private LAN Service (VPLS).
vplsConfigEntry entry .1.3.6.1.2.1.10.274.1.2.1
A row in this table represents a Virtual Private LAN
Service (VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.

A row is created via SNMP or by the agent…
Indexes
vplsConfigIndex
Column Syntax OID
vplsConfigIndex
Unique index for the conceptual row identifying
a VPLS service.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.2.1.10.274.1.2.1.1
vplsConfigName
A textual name of the VPLS.
If there is no local name, or this object is
otherwise not applicable, then this object MUST
contain a zero-length octet string.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.10.274.1.2.1.2
vplsConfigDescr
A textual string containing information about the
VPLS service. If there is no information for this VPLS
service, then this object MUST contain a zero-length
octet string.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.10.274.1.2.1.3
vplsConfigAdminStatus
The desired administrative state of the VPLS
service. If the administrative status of the
VPLS service is changed to enabled, then this

service is able to utilize pseudowires to
perform the tasks of a VP…
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.2.1.10.274.1.2.1.4
vplsConfigMacLearning
This object specifies if MAC Learning is enabled
in this service. If this object is true then MAC
Learning is enabled. If false, then MAC Learning is
disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.2.1.10.274.1.2.1.6
vplsConfigDiscardUnknownDest
If the value of this object is 'true', then frames
received with an unknown destination MAC are discarded
in this VPLS. If 'false', then the packets are
processed.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.2.1.10.274.1.2.1.7
vplsConfigMacAging
If the value of this object is 'true',
then the MAC aging process is enabled in
this VPLS. If 'false', then the MAC aging process
is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.2.1.10.274.1.2.1.8
vplsConfigFwdFullHighWatermark
This object specifies the utilization of the
forwarding database for this VPLS instance at
which the vplsFwdFullAlarmRaised notification
will be sent. The value of this object must
be higher than vplsConfigFwdFullLowWa…
percentageUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.2.1.10.274.1.2.1.10
vplsConfigFwdFullLowWatermark
This object specifies the utilization of the
forwarding database for this VPLS instance
at which the vplsFwdFullAlarmCleared
notification will be sent. The value of this
object must be less than
vplsConfigFwdFullHighWa…
percentageUnsigned32r/w
Constraints:
range: 0-99
 .1.3.6.1.2.1.10.274.1.2.1.11
vplsConfigRowStatus
For creating, modifying, and deleting this row.

All other objects in this row must be set to valid
values before this object can be set to active(1).

None of the read-create objects in the
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.274.1.2.1.12
vplsConfigMtu
The value of this object specifies the MTU of this
VPLS instance. This can be used to limit the MTU to a
value lower than the MTU supported by the associated
pseudowires.
Unsigned32r/w
Constraints:
range: 64-9192
 .1.3.6.1.2.1.10.274.1.2.1.13
vplsConfigVpnId
This objects indicates the IEEE 802-1990
VPN ID of the associated VPLS service.
VPN-TC-STD-MIBVPNIdOrZeror/w
Textual Convention: VPN-TC-STD-MIBVPNIdOrZero OctetString
Type Constraints:
range: 0
range: 7
 .1.3.6.1.2.1.10.274.1.2.1.14
vplsConfigStorageType
This variable indicates the storage type for this row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.2.1.10.274.1.2.1.15
vplsConfigSignalingType
Desired signaling type of the VPLS service.

If the value of this object is ldp(1), then a
corresponding entry in vplsLdpConfigTable is required.

If the value of this object is bgp(2), then …
Enumerationr/w
Enumerated Values:
1ldp
2bgp
3none
 .1.3.6.1.2.1.10.274.1.2.1.16

vplsStatusTable

table
.1.3.6.1.2.1.10.274.1.3 · 1 row entry · 2 columns
Open in standard view 
This table provides information for monitoring
Virtual Private LAN Service (VPLS).
vplsStatusEntry entry .1.3.6.1.2.1.10.274.1.3.1
A row in this table represents a Virtual Private LAN
Service (VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.

A row in this table is automatically crea…
Indexes
No indexes recorded
Column Syntax OID
vplsStatusOperStatus
The current operational state of this VPLS service.
Enumeration
Enumerated Values:
0other
1up
2down
 .1.3.6.1.2.1.10.274.1.3.1.1
vplsStatusPeerCount
This objects specifies the number of peers
(pseudowires) present in this VPLS instance.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.274.1.3.1.2

vplsPwBindTable

table
.1.3.6.1.2.1.10.274.1.4 · 1 row entry · 4 columns
Open in standard view 
This table provides an association between a
VPLS service and the corresponding pseudowires.
A service can have more than one pseudowire
association.  Pseudowires are defined in
the pwTable
vplsPwBindEntry entry .1.3.6.1.2.1.10.274.1.4.1
Each row represents an association between a
VPLS instance and a pseudowire
defined in the pwTable. Each index is unique
in describing an entry in this table. However,
both indexes are required to define the one
to ma…
Indexes
vplsConfigIndex PW-STD-MIBpwIndex
Column Syntax OID
vplsPwBindConfigType
The value of this object indicates
whether the pseudowire Binding was created
via SNMP/Console or via Auto-Discovery.

The value of this object must be
specified when the row is created and cannot
be chang…
Enumerationr/w
Enumerated Values:
1manual
2autodiscovery
 .1.3.6.1.2.1.10.274.1.4.1.1
vplsPwBindType
The value of this object indicates
whether the pseudowire Binding is of
type mesh or spoke.

The value of this object must be
specified when the row is created and cannot
be changed while the row status is…
Enumerationr/w
Enumerated Values:
1mesh
2spoke
 .1.3.6.1.2.1.10.274.1.4.1.2
vplsPwBindRowStatus
For creating, modifying, and deleting this row.

All other objects in this row must be set to valid

values before this object can be set to active(1).

None of the read-create …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.274.1.4.1.3
vplsPwBindStorageType
This variable indicates the storage type for this row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.2.1.10.274.1.4.1.4

vplsBgpADConfigTable

table
.1.3.6.1.2.1.10.274.1.5 · 1 row entry · 5 columns
Open in standard view 
This table specifies information for configuring
BGP Auto-Discovery parameters for a given VPLS service.
vplsBgpADConfigEntry entry .1.3.6.1.2.1.10.274.1.5.1
A row in this table indicates that BGP based Auto-
Discovery is in use for this instance of VPLS.
A row in this table is indexed by vplsConfigIndex, which
uniquely identifies a single VPLS.

Entries in this …
Indexes
vplsConfigIndex
Column Syntax OID
vplsBgpADConfigRouteDistinguisher
The route distinguisher for this VPLS. See RFC 4364
for a complete definition of a route distinguisher.
For more details on use of a route distinguisher
for a VPLS service, see RFC 4761. When not configured, the
value…
VplsBgpRouteDistinguisherr/w
Textual Convention: VplsBgpRouteDistinguisher OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.2.1.10.274.1.5.1.1
vplsBgpADConfigPrefix
In case of auto-discovery, the default prefix advertised
is the IP address of the loopback. In case the user wants
to override the loopback address, vplsBgpADConfigPrefix
should be set. When this value is non-zero, th…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.274.1.5.1.2
vplsBgpADConfigVplsId
VplsId is a unique identifier for all Virtual Switch
Instances (VSIs) belonging to the same VPLS. It is

advertised as an extended community.
VplsBgpRouteDistinguisherr/w
Textual Convention: VplsBgpRouteDistinguisher OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.2.1.10.274.1.5.1.3
vplsBgpADConfigRowStatus
For creating, modifying, and deleting this row.

All other objects in this row must be set to valid
values before this object can be set to active(1).

None of the read-create objects in the
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.274.1.5.1.4
vplsBgpADConfigStorageType
This variable indicates the storage type for this row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.2.1.10.274.1.5.1.5

vplsBgpRteTargetTable

table
.1.3.6.1.2.1.10.274.1.6 · 1 row entry · 5 columns
Open in standard view 
This table specifies the list of Route Targets
imported or exported by BGP during
auto-discovery of VPLS.
vplsBgpRteTargetEntry entry .1.3.6.1.2.1.10.274.1.6.1
An entry in this table specifies the value of the
Route Target being used by BGP. Depending on the value

of vplsBgpRteTargetType, a Route Target might be
exported, imported, or both. Every VPLS that
uses …
Indexes
vplsConfigIndex vplsBgpRteTargetIndex
Column Syntax OID
vplsBgpRteTargetIndex
This index, along with vplsConfigIndex, identifies one
entry in the vplsBgpRteTargetTable. By keeping
vplsConfigIndex constant and using a new value of
vplsBgpRteTargetIndex, users can configure multiple
Route Targets …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.10.274.1.6.1.1
vplsBgpRteTargetRTType
Used to define the type of a Route Target usage.
Route Targets can be specified to be imported,
exported, or both. For a complete definition of a
Route Target, see RFC 4364.
VplsBgpRouteTargetTyper/w
Textual Convention: VplsBgpRouteTargetType Enumeration
Type Values:
1import
2export
3both
 .1.3.6.1.2.1.10.274.1.6.1.2
vplsBgpRteTargetRT
The Route Target associated with the VPLS service.
For more details on use of Route Targets
for a VPLS service, see RFC 4761.
VplsBgpRouteTargetr/w
Textual Convention: VplsBgpRouteTarget OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.2.1.10.274.1.6.1.3
vplsBgpRteTargetRowStatus
This variable is used to create, modify, and/or
delete a row in this table.

All other objects in this row must be set to valid
values before this object can be set to active(1).

When a row …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.10.274.1.6.1.4
vplsBgpRteTargetStorageType
This variable indicates the storage type for this row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.2.1.10.274.1.6.1.5