VPLS-BGP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
8
.1.3.6.1.2.1.10.276.1.1 · 1 row entry · 1 columns
This table specifies information for configuring
and monitoring BGP-specific parameters for
Virtual Private LAN Service (VPLS).
vplsBgpConfigEntry entry .1.3.6.1.2.1.10.276.1.1.1
A row in this table represents BGP-specific information
for Virtual Private LAN Service (VPLS) in a packet
network. It is indexed by vplsConfigIndex, which uniquely
identifies a single instance of a VPLS service.
Indexes
VPLS-GENERIC-MIBvplsConfigIndex
Column Syntax OID
vplsBgpConfigVERangeSize
Specifies the size of the range of VPLS Edge
Identifier (VE ID) in this VPLS service. This
number controls the size of the label block
advertised for this VE by the PE. A value of 0
indicates that the range is not con…
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.2.1.10.276.1.1.1.1
.1.3.6.1.2.1.10.276.1.2 · 1 row entry · 5 columns
This table associates VPLS Edge devices to a VPLS service
vplsBgpVEEntry entry .1.3.6.1.2.1.10.276.1.2.1
An entry in this table is created for each VE ID
configured on a PE for a particular VPLS service
instance.

Entries in this table may be created or deleted
through SNMP, as side effects of console or other
Indexes
VPLS-GENERIC-MIBvplsConfigIndex vplsBgpVEId
Column Syntax OID
vplsBgpVEId
A secondary index identifying a VE within an
instance of a VPLS service.

The VE ID takes 2 octets in VPLS BGP NLRI according
to RFC 4761. Hence, we have limited the range of
this object to 65535.
Unsigned32
Constraints:
range: 1-65535
.1.3.6.1.2.1.10.276.1.2.1.1
vplsBgpVEName
Descriptive name for the site or user-facing PE
(U-PE) associated with this VE ID.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.2.1.10.276.1.2.1.2
vplsBgpVEPreference
Specifies the preference of the VE ID on this
Provider Edge (PE) if the site is multihomed
and VE ID is reused.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.2.1.10.276.1.2.1.3
vplsBgpVERowStatus
This variable is used to create, modify, and/or
delete a row in this table.

All other objects in this row must be set to valid
values before this object can be set to active(1).

When a row …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.2.1.10.276.1.2.1.5
vplsBgpVEStorageType
This variable indicates the storage type for this

row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
.1.3.6.1.2.1.10.276.1.2.1.6
.1.3.6.1.2.1.10.276.1.3 · 1 row entry · 2 columns
This table provides BGP-specific information for
an association between a VPLS service and the
corresponding pseudowires.  A service can have more
than one pseudowire association.  Pseudowires are
defined in the pwTable.
vplsBgpPwBindEntry entry .1.3.6.1.2.1.10.276.1.3.1
Each row represents an association between a
VPLS instance and one or more pseudowires
defined in the pwTable. Each index is unique
in describing an entry in this table. However,
both indexes are required to define th…
Indexes
VPLS-GENERIC-MIBvplsConfigIndex PW-STD-MIBpwIndex
Column Syntax OID
vplsBgpPwBindLocalVEId
Identifies the local VE with which this pseudowire
is associated.

The VE ID takes 2 octets in VPLS BGP NLRI according
to RFC 4761. Hence, we have limited the range of
this object to 65535.
Unsigned32
Constraints:
range: 1-65535
.1.3.6.1.2.1.10.276.1.3.1.1
vplsBgpPwBindRemoteVEId
Identifies the remote VE with which this pseudowire
is associated.

The VE ID takes 2 octets in VPLS BGP NLRI according
to RFC 4761. Hence, we have limited the range of
this object to 65535.
Unsigned32
Constraints:
range: 1-65535
.1.3.6.1.2.1.10.276.1.3.1.2