TPLINK-RIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
17

tpRipNetworkTable

table
.1.3.6.1.4.1.11863.6.40.1.2.1 · 1 row entry · 2 columns
Open in standard view 
The list of rip network.
tpRipNetworkEntry entry .1.3.6.1.4.1.11863.6.40.1.2.1.1
RIP network entries.
Indexes
tpRipNetworkAddress
Column Syntax OID
tpRipNetworkAddress
RIP network IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.40.1.2.1.1.1
tpRipNetworkStatus
The following values are states:
these values may be used as follow:
active(1),if the entry is being used.
notInService(2),destory the entry.
notReady(3),destory the entry.
createAndGo(4),not being used
createAndWait(5)…
TPLINK-TC-MIBTPRowStatusr/w
Textual Convention: TPLINK-TC-MIBTPRowStatus Enumeration
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.40.1.2.1.1.2

tpRipInterfaceTable

table
.1.3.6.1.4.1.11863.6.40.1.3.1 · 1 row entry · 10 columns
Open in standard view 
The list of rip interfaces.
tpRipInterfaceEntry entry .1.3.6.1.4.1.11863.6.40.1.3.1.1
Config the RIP parameters of the interface.
Indexes
tpRipInterfaceID
Column Syntax OID
tpRipInterfaceID
The interface IP address and subnet mask.
OctetString
Constraints:
range: 0-25
 .1.3.6.1.4.1.11863.6.40.1.3.1.1.1
tpRipInterfaceStatus
The interface RIP status(up or down).
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.11863.6.40.1.3.1.1.2
tpRipInterfaceSendVersion
Select the version of RIP control packets sended from the interface.
Enumerationr/w
Enumerated Values:
1ripv1
2ripv2
3rip-1c
 .1.3.6.1.4.1.11863.6.40.1.3.1.1.3
tpRipInterfaceRecvVersion
Select the version of RIP control packets received from the interface.
Enumerationr/w
Enumerated Values:
1ripv1
2ripv2
3both
 .1.3.6.1.4.1.11863.6.40.1.3.1.1.4
tpRipInterfaceRIPv2Broad
Send RIP version 2 formatted packets via broadcast.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.40.1.3.1.1.5
tpRipInterfaceAuthMode
Select an authentication type.
Enumerationr/w
Enumerated Values:
1none
2simple
3md5
 .1.3.6.1.4.1.11863.6.40.1.3.1.1.6
tpRipInterfaceKeyID
Enter the RIP Authentication Key ID for the specified interface.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11863.6.40.1.3.1.1.7
tpRipInterfaceKey
Enter the RIP Authentication Key for the specified interface.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.11863.6.40.1.3.1.1.8
tpRipInterfaceSplitHorizon
Enable or disable the split horizon.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.40.1.3.1.1.9
tpRipInterfacePoisonReverse
Enable or disable the poison reverse.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.40.1.3.1.1.10

tpRipRouteTable

table
.1.3.6.1.4.1.11863.6.40.1.4.1 · 1 row entry · 5 columns
Open in standard view 
Display the route entries generated by RIP protocol.
tpRipRouteEntry entry .1.3.6.1.4.1.11863.6.40.1.4.1.1
RIP route entries.
Indexes
tpRipIpAddressMask
Column Syntax OID
tpRipIpAddressMask
The destination IP address and subnet mask.
OctetString
Constraints:
range: 0-25
 .1.3.6.1.4.1.11863.6.40.1.4.1.1.1
tpRipGateway
The gateway interface to send the data packet.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.40.1.4.1.1.2
tpRipMetric
The metric to reach the destination IP address.
Integer32
Constraints:
range: 1-15
 .1.3.6.1.4.1.11863.6.40.1.4.1.1.3
tpRipInterfaceName
The gateway interface name.
OctetString
Constraints:
range: 0-25
 .1.3.6.1.4.1.11863.6.40.1.4.1.1.4
tpRipTimers
The time of the route entry.
Integer32
Constraints:
range: 1-300
 .1.3.6.1.4.1.11863.6.40.1.4.1.1.5