TPLINK-POWER-OVER-ETHERNET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
17

tpPoePortConfigTable

table
.1.3.6.1.4.1.11863.6.56.1.1.2.1 · 1 row entry · 11 columns
Open in standard view 
A list of PoE entries.
Here you can configure the PoE feature on each port.
tpPoePortConfigEntry entry .1.3.6.1.4.1.11863.6.56.1.1.2.1.1
An entry contains of the configuration and information of poe port.
Indexes
tpPoePortIndex
Column Syntax OID
tpPoePortIndex
The port number of the Switch.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.1
tpPoePortStatus
Select to disable/enable the PoE feature
for the corresponding port. If set enable,
the corresponding port can supply power to
the linked PD (Powered Device).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.2
tpPoePriority
Cooperates with the Power Disconnected Method
to decide the way to supply power to the new
linked PD (Powered Device) when the surplus
power is inadequate.
Enumerationr/w
Enumerated Values:
0high
1middle
2low
 .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.3
tpPoePowerLimit
Defines the max power the corresponding port can supply.The unit is 0.1W
Integer32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.4
tpPoePortTimeRangeName
Select time range by entering its name.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.5
tpPoePortProfileName
Select profile by entering its name.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.6
tpPoePower
Displays the port's real time power supply in 0.1W.
Integer32
Constraints:
range: 1-300
 .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.7
tpPoeCurrent
Displays the port's real time current in 1mA.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.8
tpPoeVoltage
Displays the port's real time voltage in 0.1V.
Integer32
Constraints:
range: 1-300
 .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.9
tpPoeClass
Displays the class the linked PD (Powered Device) belongs to.
Enumeration
Enumerated Values:
0class0
1class1
2class2
3class3
4class4
7class-not-defined
 .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.10
tpPoePowerStatus
Displays the port's real time power status.
Enumeration
Enumerated Values:
0off
1turning-on
2on
3overload
4short
5nonstandard-pd
6voltage-high
7voltage-low
8hardware-fault
9overtemperature
 .1.3.6.1.4.1.11863.6.56.1.1.2.1.1.11

tpPoeProfileTable

table
.1.3.6.1.4.1.11863.6.56.1.2.1 · 1 row entry · 6 columns
Open in standard view 
A list of PoE profile entries.
Here you can define the PoE profile.
tpPoeProfileEntry entry .1.3.6.1.4.1.11863.6.56.1.2.1.1
An entry contains of the information of PoE profile.
Indexes
tpPoeProfileName
Column Syntax OID
tpPoeProfileIndex
The index number of the Switch.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.56.1.2.1.1.1
tpPoeProfileName
the name of PoE profile.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.11863.6.56.1.2.1.1.2
tpPoeProfilePortStatus
Select to disable/enable the PoE feature
for the corresponding profile. If set enable,
the port selected the profile can supply power to
the linked PD (Powered Device).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.56.1.2.1.1.3
tpPoeProfilePriority
Cooperates with the Power Disconnected Method
to decide the way to supply power to the new
linked PD (Powered Device) when the surplus
power is inadequate.
Enumerationr/w
Enumerated Values:
0high
1middle
2low
 .1.3.6.1.4.1.11863.6.56.1.2.1.1.4
tpPoeProfilePowerLimit
Defines the max power the corresponding port can supply.The unit is 0.1W.
Integer32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.11863.6.56.1.2.1.1.5
tpPoeProfileStatus TPLINK-TC-MIBTPRowStatusr/w
Textual Convention: TPLINK-TC-MIBTPRowStatus Enumeration
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.56.1.2.1.1.6