TPLINK-IPADDR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
32

tpVlanInterfaceTable

table
.1.3.6.1.4.1.11863.6.6.1.1.1 · 1 row entry · 8 columns
Open in standard view 
A list of VLAN interface entries. VLAN interface is a virtual interface which is working in the level 3,
it is used to communicate between the VLAN in the level 3, and it is not a physical entity in the device.
Each VLAN has a VLAN interface,and the VLAN interface can transmit the packets for the port which belong to this VLAN.
In general,because the VLAN can isolate broadcast, each VLAN has a subnet address,and as a gateway of the subnet address,
the VLAN interface can do the transmittance basic of IP address in level 3 for the packet which need to span the subnet address.
tpVlanInterfaceConfigEntry entry .1.3.6.1.4.1.11863.6.6.1.1.1.1
The interface can be added or removed .
Indexes
tpVlanInterfaceVlanId tpVlanInterfaceIp tpVlanInterfaceSecondary
Column Syntax OID
tpVlanInterfaceVlanId
The id of the VLAN interface,and it must be in the 802.1Q VLAN of the ingress port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.6.1.1.1.1.1
tpVlanInterfaceSecondary
If the ip address is secondary IP.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.6.1.1.1.1.2
tpVlanInterfaceMode
The IP address alloc-mode of VLAN interface.
TpInterfaceModer/w
Textual Convention: TpInterfaceMode Enumeration
Type Values:
0none
1manual
2dhcp
3bootp
 .1.3.6.1.4.1.11863.6.6.1.1.1.1.3
tpVlanInterfaceIp
The IP address of the VLAN interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.6.1.1.1.1.4
tpVlanInterfaceMsk
The IP mask of the VLAN interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.6.1.1.1.1.5
tpVlanInterfaceName
The name of the VLAN interface.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.11863.6.6.1.1.1.1.6
tpVlanInterfaceDhcpOption12
The DHCP Option 12 of the VLAN interface.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.11863.6.6.1.1.1.1.7
tpVlanInterfaceStatus
The following values are states:
these values may be used as follow:
active(1),if the entry is being used.
notInService(2),destory the entry.
notReady(3),destory the entry.
createAndGo(4),not being used
createAndWait(5)…
TPLINK-TC-MIBTPRowStatusr/w
Textual Convention: TPLINK-TC-MIBTPRowStatus Enumeration
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.6.1.1.1.1.8

tpLoopbackInterfaceTable

table
.1.3.6.1.4.1.11863.6.6.1.1.2 · 1 row entry · 8 columns
Open in standard view 
A list of Loopback interface entries. Loopback interface is a virtual interface which purely software implemented, 
commonly used as router-id or network test.
tpLoopbackInterfaceConfigEntry entry .1.3.6.1.4.1.11863.6.6.1.1.2.1
The interface can be added or removed .
Indexes
tpLoopbackInterfaceId tpLoopbackInterfaceIp tpLoopbackInterfaceSecondary
Column Syntax OID
tpLoopbackInterfaceId
The id of the loopback interface (1-2147483647).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.6.1.1.2.1.1
tpLoopbackInterfaceSecondary
If the ip address is secondary IP.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.6.1.1.2.1.2
tpLoopbackInterfaceMode
The IP address alloc-mode of loopback interface.
TpInterfaceMode2r/w
Textual Convention: TpInterfaceMode2 Enumeration
Type Values:
0none
1manual
 .1.3.6.1.4.1.11863.6.6.1.1.2.1.3
tpLoopbackInterfaceIp
The IP address of the loopback interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.6.1.1.2.1.4
tpLoopbackInterfaceMsk
The IP mask of the loopback interface. 32-bit mask is required.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.6.1.1.2.1.5
tpLoopbackInterfaceName
The name of the loopback interface.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.11863.6.6.1.1.2.1.6
tpLoopbackInterfaceDhcpOption12
The DHCP Option 12 of the loopback interface.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.11863.6.6.1.1.2.1.7
tpLoopbackInterfaceStatus
Action status.
TPLINK-TC-MIBTPRowStatusr/w
Textual Convention: TPLINK-TC-MIBTPRowStatus Enumeration
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.6.1.1.2.1.8

tpRoutedPortTable

table
.1.3.6.1.4.1.11863.6.6.1.1.3 · 1 row entry · 8 columns
Open in standard view 
A list of routed port. A routed port is special port mode which you can configure Layer 3 function like RIP, OSPF,
while some Layer 2 function like speed, flow-control is also available.
tpRoutedPortConfigEntry entry .1.3.6.1.4.1.11863.6.6.1.1.3.1
The interface can be added or removed .
Indexes
RFC1213-MIBifIndex tpRoutedPortIp tpRoutedPortSecondary
Column Syntax OID
tpRoutedPortId
The port id.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.11863.6.6.1.1.3.1.1
tpRoutedPortSecondary
If the ip address is secondary IP.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.6.1.1.3.1.2
tpRoutedPortMode
The IP address alloc-mode of the routed port.
TpInterfaceModer/w
Textual Convention: TpInterfaceMode Enumeration
Type Values:
0none
1manual
2dhcp
3bootp
 .1.3.6.1.4.1.11863.6.6.1.1.3.1.3
tpRoutedPortIp
The IP address of the routed port.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.6.1.1.3.1.4
tpRoutedPortMsk
The IP mask of the routed port.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.6.1.1.3.1.5
tpRoutedPortName
The name of the routed port.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.11863.6.6.1.1.3.1.6
tpRoutedPortDhcpOption12
The DHCP Option 12 of the routed port.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.11863.6.6.1.1.3.1.7
tpRoutedPortStatus
Action status.
TPLINK-TC-MIBTPRowStatusr/w
Textual Convention: TPLINK-TC-MIBTPRowStatus Enumeration
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.6.1.1.3.1.8

tpPortChannelTable

table
.1.3.6.1.4.1.11863.6.6.1.1.4 · 1 row entry · 8 columns
Open in standard view 
A list of port-channel interface entries.
tpPortChannelConfigEntry entry .1.3.6.1.4.1.11863.6.6.1.1.4.1
The interface can be added or removed .
Indexes
tpPortChannelId tpPortChannelIp tpPortChannelSecondary
Column Syntax OID
tpPortChannelId
The id of the port-channel interface.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.6.1.1.4.1.1
tpPortChannelSecondary
If the ip address is secondary IP.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.6.1.1.4.1.2
tpPortChannelMode
The IP address alloc-mode of port-channel interface.
TpInterfaceModer/w
Textual Convention: TpInterfaceMode Enumeration
Type Values:
0none
1manual
2dhcp
3bootp
 .1.3.6.1.4.1.11863.6.6.1.1.4.1.3
tpPortChannelIp
The IP address of the port-channel interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.6.1.1.4.1.4
tpPortChannelMsk
The IP mask of the port-channel interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.6.1.1.4.1.5
tpPortChannelName
The name of the port-channel interface.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.11863.6.6.1.1.4.1.6
tpPortChannelDhcpOption12
The DHCP Option 12 of the port-channel interface.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.11863.6.6.1.1.4.1.7
tpPortChannelStatus
The following values are states:
these values may be used as follow:
active(1),if the entry is being used.
notInService(2),destory the entry.
notReady(3),destory the entry.
createAndGo(4),not being used
createAndWait(5)…
TPLINK-TC-MIBTPRowStatusr/w
Textual Convention: TPLINK-TC-MIBTPRowStatus Enumeration
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.6.1.1.4.1.8