TPLINK-GVRP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
7
tpGvrpPortTable
table.1.3.6.1.4.1.11863.6.20.1.2.1
·
1 row entry
·
7 columns
Here you can set the GVRP parameters for each port.
An entry contains of the information of a port.
Indexes
RFC1213-MIBifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
tpGvrpPortNumber
Displays the port number.
|
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.11863.6.20.1.2.1.1.1 |
||||||
|
tpGvrpPortEnable
Enable/Disable the GVRP feature for the port. The port type
should be set to TRUNK before enabling the GVRP feature. 0. Disable 1. Enable |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.11863.6.20.1.2.1.1.2 |
||||||
|
tpGvrpPortRegistration
Select the Registration Mode for the port.
0. NORMAL:In this mode, a port can dynamically register/deregister a VLAN and propagate the dynamic/static VLAN information. 1. FIXED:In this mode, a port cannot register/de… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.11863.6.20.1.2.1.1.3 |
||||||
|
tpGvrpLeaveAllTimer
Once the LeaveAll Timer is set, the port with GVRP enabled
can send a LeaveAll message after the timer times out, so that other GARP ports can re-register all the attribute information. After that, the LeaveAll timer… |
Integer32r/w Constraints: range: 1000-30000 |
.1.3.6.1.4.1.11863.6.20.1.2.1.1.4 |
||||||
|
tpGvrpJoinTimer
To guarantee the transmission of the Join messages, a GARP
port sends each Join message two times. The Join Timer is used to define the interval between the two sending operations of each Join message. The Join Timer… |
Integer32r/w Constraints: range: 20-1000 |
.1.3.6.1.4.1.11863.6.20.1.2.1.1.5 |
||||||
|
tpGvrpLeaveTimer
Once the Leave Timer is set, the GARP port receiving a
Leave message will start its Leave timer, and unregister the attribute information if it does not receive a Join message again before the timer times out. The Le… |
Integer32r/w Constraints: range: 60-3000 |
.1.3.6.1.4.1.11863.6.20.1.2.1.1.6 |
||||||
|
tpGvrpPortLag
Displays the LAG to which the port belongs.
|
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.11863.6.20.1.2.1.1.7 |