TN-MPLS-TP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
10
Rows
10
Columns
85
.1.3.6.1.4.1.7483.6.1.2.83.2.1.1 · 1 row entry · 7 columns
The vRtrMplsTpSystemTable consists of the globally unique configuration
objects for MPLS-TP. These objects are typically required to be set
prior to configuring MPLS-TP LSP objects.
vRtrMplsTpSystemEntry entry .1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1
The vRtrMplsTpSystemEntry contains the globally unique configuration
objects for MPLS-TP.
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID
Column Syntax OID
vRtrMplsTpRowStatus
The value of vRtrMplsTpRowStatus specifies the row status of the
MPLS-TP system entry. A row must exist in this table for a specified
virtual router ID for MPLS-TP LSP configuration to be allowed.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.1
vRtrMplsTpGlobalId
The value of vRtrMplsTpGlobalId specifies the AS number of the node.
TN-TC-MIBTmnxMplsTpGlobalIDr/w
Textual Convention: TN-TC-MIBTmnxMplsTpGlobalID Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.2
vRtrMplsTpNodeId
The value of vRtrMplsTpNodeId specifies the unique node identifier for
the given global ID. If not specified, the MPLS Router ID of the node
is used.
TN-TC-MIBTmnxMplsTpNodeIDr/w
Textual Convention: TN-TC-MIBTmnxMplsTpNodeID Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.3
vRtrMplsTpTunnelIdMin
The value of vRtrMplsTpTunnelIdMin specifies the start
range of tunnel ids reserved for MPLS-TP LSPs.

This variable must be set along with vRtrMplsTpTunnelIdMax
to indicate the range of tunnel ids reserve…
Unsigned32r/w
Constraints:
range: 0-61440
.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.4
vRtrMplsTpTunnelIdMax
The value of vRtrMplsTpTunnelIdMax specifies the end
range of tunnel ids reserved for MPLS-TP LSPs.

This variable must be set along with vRtrMplsTpTunnelIdMin
to indicate the range of tunnel ids reserved …
Unsigned32r/w
Constraints:
range: 0-61440
.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.5
vRtrMplsTpAdminState
The value of vRtrMplsTpAdminState specifies the desired
administrative state of MPLS-TP on this router.
TN-TC-MIBTmnxAdminStater/w
Textual Convention: TN-TC-MIBTmnxAdminState Enumeration
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.6
vRtrMplsTpInheritance
For each writable object in this row that can be configured to
inherit its value from the corresponding object in the
vRtrIpAddrTable, there is bit within vRtrMplsTpInheritance
that controls whether to inherit the opera…
Bitsr/w
Enumerated Values:
0vRtrMplsTpNodeId
.1.3.6.1.4.1.7483.6.1.2.83.2.1.1.1.7
.1.3.6.1.4.1.7483.6.1.2.83.2.2.1 · 1 row entry · 6 columns
The vRtrMplsTpOamTemplateCfgTable maintains the MPLS-TP Templates used
by MPLS-TP OAM.
          
The template is specific to the OAM protocol and can be used to
configure MPLS-TP-OAM parameters such as BFD Tx/Rx timer intervals,
multiplier and any other relevant session/fault management parameters.
The OAM template is referenced in the MPLS-TP path configuration, so
different values are possible for the working and protect paths of a
tunnel.
vRtrMplsTpOamTemplateCfgEntry entry .1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1
The vRtrMplsTpOamTemplateCfgEntry contains the configuration items
maintained by the vRtrMplsTpOamTemplateCfgTable.
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID vRtrMplsTpOamTmplName
Column Syntax OID
vRtrMplsTpOamTmplName
The value vRtrMplsTpOamTmplName specifies the unique name of the
MPLS-TP OAM Template.
TN-TC-MIBTNamedItem
Textual Convention: TN-TC-MIBTNamedItem OctetString
Type Constraints:
range: 1..32
.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.1
vRtrMplsTpOamTmplRowStatus
The value of vRtrMplsTpOamTmplRowStatus specifies the row status of the
MPLS-TP OAM Template entry.

Rows are created by setting this object to the value 'createAndGo (4)'
and are destroyed using the value…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.2
vRtrMplsTpOamTmplLastChangedTime
The value vRtrMplsTpOamTmplLastChangedTime indicates the time, since
system startup, that an columnar object in this row changed state.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.3
vRtrMplsTpOamTmplBfdTemplateName
The value of vRtrMplsTpOamTmplBfdTemplateName specifies the
TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by the OAM template.
TN-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.4
vRtrMplsTpOamTmplHoldTimeDown
The value of vRtrMplsTpOamTmplHoldTimeDown specifies the time, in
centiseconds, used for the hold-timer for the BFD Continuity Check (CC)
session down event dampening. This guards against reporting excessive
operational…
centisecondsUnsigned32r/w
Constraints:
range: 0-5000
.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.5
vRtrMplsTpOamTmplHoldTimeUp
The value of vRtrMplsTpOamTmplHoldTimeUp specifies the time, in
deciseconds, used for the hold-timer for the BFD Continuity Check (CC)
session up event dampening. This guards against reporting excessive
operational stat…
decisecondsUnsigned32r/w
Constraints:
range: 0-500
.1.3.6.1.4.1.7483.6.1.2.83.2.2.1.1.6
.1.3.6.1.4.1.7483.6.1.2.83.2.2.2 · 1 row entry · 9 columns
The vRtrMplsTpPtcTemplateCfgTable maintains the MPLS-TP Templates used
for MPLS LSP Protection. Entries in this table maintain the common
configuration elements used by the protected LSPs.
vRtrMplsTpPtcTemplateCfgEntry entry .1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1
The vRtrMplsTpPtcTemplateCfgEntry contains the configuration items
maintained by the vRtrMplsTpPtcTemplateCfgTable.
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID vRtrMplsTpPtcTmplName
Column Syntax OID
vRtrMplsTpPtcTmplName
The value of vRtrMplsTpPtcTmplName specifies the unique name of the
MPLS-TP Protection Template.
TN-TC-MIBTNamedItem
Textual Convention: TN-TC-MIBTNamedItem OctetString
Type Constraints:
range: 1..32
.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.1
vRtrMplsTpPtcTmplRowStatus
The value of vRtrMplsTpPtcTmplRowStatus specifies the row status of the
MPLS-TP Protection Template.

Rows are created by setting this object to the value 'createAndGo (4)'
and are destroyed by using the v…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.2
vRtrMplsTpPtcTmplLastChangedTime
The value of vRtrMplsTpPtcTmplLastChangedTime indicates the time, since
system startup, that a columnar object in the MPLS-TP Protection
Template entry last changed state.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.3
vRtrMplsTpPtcTmplProtectionMode
The value of vRtrMplsTpPtcTmplProtectionMode specifies the mode used
for determining which members are actively receiving and transmitting
data.

In the 'one2one (1)' (1:1) architecture, a protection trans…
Enumerationr/w
Enumerated Values:
1one2one
.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.4
vRtrMplsTpPtcTmplProtectionDir
The value of vRtrMplsTpPtcTmplProtectionDir specifies the directional
mode of the Protection Template.
bidirectional - provides protection in both directions.
Enumerationr/w
Enumerated Values:
2bidirectional
.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.5
vRtrMplsTpPtcTmplRevertive
The value of vRtrMplsTpPtcTmplRevertive specifies whether or not an
instance of this Template will operate in a 'revertive (2)' or
'nonRevertive (1)' mode.
Enumerationr/w
Enumerated Values:
1nonRevertive
2revertive
.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.6
vRtrMplsTpPtcTmplWaitToRestore
The value of vRtrMplsTpPtcTmplWaitToRestore specifies the
Wait-To-Restore (WTR) timer, in seconds, after a cleared failure the
working path must wait before reverting.

The WTR timer is used to prevent fre…
secondsUnsigned32r/w
Constraints:
range: 0-720
.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.7
vRtrMplsTpPtcTmplRapidPscTimer
The value of vRtrMplsTpPtcTmplRapidPscTimer specifies the time, in
milliseconds, for the Rapid Protection Switch Coordination (PSC) timer.
A value of 3 denotes 3.33 ms.

When the protection domain state is…
millisecondsUnsigned32r/w
Constraints:
range: 3-3
range: 10-10
range: 100-100
range: 1000-1000
.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.8
vRtrMplsTpPtcTmplSlowPscTimer
The value of vRtrMplsTpPtcTmplSlowPscTimer specifies the time, in
seconds, for the Slow Protection Switch Coordination (PSC) timer used
to continually transmit the PSC message.
secondsUnsigned32r/w
Constraints:
range: 5-60
.1.3.6.1.4.1.7483.6.1.2.83.2.2.2.1.9
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2 · 1 row entry · 16 columns
The vRtrMplsTpLspPathTable maintains the MPLS-TP configuration objects
associated with an MPLS LSP path.
vRtrMplsTpLspPathEntry entry .1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1
The vRtrMplsTpLspPathEntry contains the configuration objects for the
MPLS-TP path table.
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID TN-MPLS-MIBvRtrMplsLspIndex vRtrMplsTpLspPathIndex
Column Syntax OID
vRtrMplsTpLspPathIndex
The value of vRtrMplsTpLspPathIndex specifies the path index for the
MPLS-TP LSP path.
working (1) - A working path is the primary path for the LSP.
protecting (2) - A protection path is the secondary path for …
Enumeration
Enumerated Values:
1working
2protecting
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.1
vRtrMplsTpLspPathRowStatus
The value of vRtrMplsTpLspPathRowStatus specifies the row status of the
MPLS-TP LSP Path.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.2
vRtrMplsTpLspPathLastChangedTime
The value of vRtrMplsTpLspPathLastChangedTime indicates the last time,
since system startup, that a writable object in this table was
modified.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.3
vRtrMplsTpLspPathAdminState
The value of vRtrMplsTpLspPathAdminState specifies the administrative
state of the MPLS-TP LSP Path.
TN-TC-MIBTmnxAdminStater/w
Textual Convention: TN-TC-MIBTmnxAdminState Enumeration
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.4
vRtrMplsTpLspPathOperState
The value of vRtrMplsTpLspPathOperState indicates the operational state
of the MPLS-TP LSP Path.
TN-TC-MIBTmnxOperState
Textual Convention: TN-TC-MIBTmnxOperState Enumeration
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.5
vRtrMplsTpLspPathReasonDownFlags
The value of vRtrMplsTpLspPathReasonDownFlags specifies the reason why
the MPLS-TP LSP Path is operationally down when the administrative state
is 'inService (2)'.

The recognized BIT values are:
unkno…
Bits
Enumerated Values:
0unknown
1ccFault
2cvFault
3ifDn
4portDn
5parentAdminDn
6mepAdminDn
7unsupportedPort
8ifNhAddrInconsistent
9ptcTmplMsng
10ccDnHold
11ccUpHold
12bfdNoRsrc
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.6
vRtrMplsTpLspPathLspNumber
The value of vRtrMplsTpLspPathLspNumber specifies the MPLS-TP LSP Path
number.

The default value of this object is dependent on the value of
vRtrMplsTpLspPathIndex. If this object refers to a 'working (1)…
Unsigned32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.7
vRtrMplsTpLspPathInLabel
The value of vRtrMplsTpLspPathInLabel specifies the LSP ingress Label
used by the MPLS-TP LSP Path.

Once this object is set, to remove the in-label, one must destroy and
recreate the vRtrMplsTpLspPathEntr…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.8
vRtrMplsTpLspPathOutLabel
The value of vRtrMplsTpLspPathOutLabel specifies the LSP egress Label
used by the MPLS-TP LSP Path.

Once this object is set, to remove the out-label, one must destroy and
recreate the vRtrMplsTpLspPathEnt…
Unsigned32r/w
Constraints:
range: 0-0
range: 16-1048575
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.9
vRtrMplsTpLspPathOutLink
The value of vRtrMplsTpLspPathOutLink specifies the LSP out-link
interface used by the MPLS-TP LSP Path.

Once this object is set, to remove the out-link, one must destroy and
recreate the vRtrMplsTpLspPat…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.10
vRtrMplsTpLspPathNextHopAddrType
The value of vRtrMplsTpLspPathNextHopAddrType, along with
vRtrMplsTpLspPathNextHopAddress, specifies the IP address used as the
next hop for the MPLS-TP LSP Path.

Once this object is set, to remove the ne…
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.11
vRtrMplsTpLspPathNextHopAddress
The value of vRtrMplsTpLspPathNextHopAddress, along with
vRtrMplsTpLspPathNextHopAddrType, specifies the IP address used as the
next hop for the MPLS-TP LSP Path.

Once this object is set, to remove the ne…
OctetStringr/w
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.12
vRtrMplsTpLspPathState
The value of vRtrMplsTpLspPathState indicates the current working state
of the MPLS-TP LSP Path.
Enumeration
Enumerated Values:
1unknown
2active
3inactive
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.13
vRtrMplsTpLspPathTimeUp
The value of vRtrMplsTpLspPathTimeUp indicates the time that
this MPLS-TP LSP path has been operational.
centisecondsSNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.14
vRtrMplsTpLspPathTimeDown
The value of vRtrMplsTpLspPathTimeDown indicates the time that
this MPLS-TP LSP Path has not been operational.
centisecondsSNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.15
vRtrMplsTpLspPathActiveTimeUp
The value of vRtrMplsTpLspPathActiveTimeUp indicates the time that
this MPLS-TP LSP Path has been active.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.7483.6.1.2.83.2.3.2.1.16
.1.3.6.1.4.1.7483.6.1.2.83.2.3.3 · 1 row entry · 7 columns
The vRtrMplsTpLspPathMepTable maintains the Maintenance End Points
(MEPs) for the MPLS-TP LSP path.
vRtrMplsTpLspPathMepEntry entry .1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1
The vRtrMplsTpLspPathMepEntry represents a Maintenance Endpoint for a
MPLS-TP LSP Path.
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID TN-MPLS-MIBvRtrMplsLspIndex vRtrMplsTpLspPathIndex
Column Syntax OID
vRtrMplsTpLspPathMepLastChgTime
The value of vRtrMplsTpLspPathMepLastChgTime indicates the time, since
system startup, when a columnar object for the specified row last
changed state.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.1
vRtrMplsTpLspPathMepRowStatus
The value of vRtrMplsTpLspPathMepRowStatus specifies the row status of
the vRtrMplsTpLspPathMepEntry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.2
vRtrMplsTpLspPathMepAdminState
The value of vRtrMplsTpLspPathMepAdminState specifies the
administrative state of the MPLS-TP LSP path.
TN-TC-MIBTmnxAdminStater/w
Textual Convention: TN-TC-MIBTmnxAdminState Enumeration
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.3
vRtrMplsTpLspPathMepProtectTmpl
The value of vRtrMplsTpLspPathMepProtectTmpl specifies the associated
vRtrMplsTpPtcTemplateCfgEntry to this MPLS-TP LSP Path MEP.

This object is only meaningful to the row indexed with the
vRtrMplsTpLspPa…
TN-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.4
vRtrMplsTpLspPathMepOamTmpl
The value of vRtrMplsTpLspPathMepOamTmpl specifies the associated
vRtrMplsTpOamTemplateCfgEntry to this MPLS-TP LSP Path MEP.
TN-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.5
vRtrMplsTpLspPathMepBfdEnabled
The value of vRtrMplsTpLspPathMepBfdEnabled specifies whether BFD is
enabled or not.

If set to 'disabled (0)', BFD is not enabled.
If set to 'cc (1)', BFD is enabled with Continuity Check (CC)
Enumerationr/w
Enumerated Values:
0disabled
1cc
2ccCv
.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.6
vRtrMplsTpLspPathMepBfdOperState
The value of vRtrMplsTpLspPathMepBfdOperState indicates the operational
state of the BFD session.

The operational state of 'unknown (1)' indicates that the BFD session
is not enabled.
TN-TC-MIBTmnxOperState
Textual Convention: TN-TC-MIBTmnxOperState Enumeration
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.7483.6.1.2.83.2.3.3.1.7
.1.3.6.1.4.1.7483.6.1.2.83.2.3.4 · 1 row entry · 4 columns
The vRtrMplsTpLspPtPathMepStatTable maintains the Maintenance End
Points (MEPs) statistics for MPLS-TP LSP protection paths.
vRtrMplsTpLspPtPathMepStatEntry entry .1.3.6.1.4.1.7483.6.1.2.83.2.3.4.1
The vRtrMplsTpLspPathMepEntry represents a Maintenance Endpoint for a
MPLS-TP LSP protection Path.

Rows are created and destroyed by the system based on the configuration
of the MEP protection-type.
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID TN-MPLS-MIBvRtrMplsLspIndex vRtrMplsTpLspPathIndex
Column Syntax OID
vRtrMplsTpLspPtPathMepRxPdu
The value of vRtrMplsTpLspPtPathMepRxPdu indicates the last received
PSC PDU APS format. The value of this object compared to that of
vRtrMplsTpLspPtPathMepTxPdu will indicate a configuration mismatch
between the local …
VRtrMplsTpLspPathMepPduType
Textual Convention: VRtrMplsTpLspPathMepPduType OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.7483.6.1.2.83.2.3.4.1.1
vRtrMplsTpLspPtPathMepTxPdu
The value of vRtrMplsTpLspPtPathMepTxPdu indicates the last transmitted
PSC PDU APS format. The value of this object compared to that of
vRtrMplsTpLspPtPathMepRxPdu will indicate a configuration mismatch
between the loc…
VRtrMplsTpLspPathMepPduType
Textual Convention: VRtrMplsTpLspPathMepPduType OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.7483.6.1.2.83.2.3.4.1.2
vRtrMplsTpLspPtPathMepDefects
The value of vRtrMplsTpLspPtPathMepDefects indicates the defect state
of the protection path MEP. The defects monitored by this object are as
follows:

- protectionTypeMismatch (0) - A protection-type …
Bits
Enumerated Values:
0protectionTypeMismatch
1revertModeMismatch
.1.3.6.1.4.1.7483.6.1.2.83.2.3.4.1.3
vRtrMplsTpLspPtPathMepWTRTimer
The value of vRtrMplsTpLspPtPathMepWTRTimer indicates the remaining
Wait-To-Restore time, in seconds, before the protection path can
switch back to the working path.

A value of zero (0) indicates that the…
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7483.6.1.2.83.2.3.4.1.4
.1.3.6.1.4.1.7483.6.1.2.83.2.4.1 · 1 row entry · 1 columns
The vRtrMplsTpTunnelCommandTable maintains the one-shot action
commands that effect the state of the MPLS-TP operation.
vRtrMplsTpTunnelCommandEntry entry .1.3.6.1.4.1.7483.6.1.2.83.2.4.1.1
The vRtrMplsTpTunnelCommandEntry contains the command available to
execute on an existing MPLS-TP Tunnel.

Rows in this table are created and destroyed by the system.
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID TN-MPLS-MIBvRtrMplsLspIndex
Column Syntax OID
vRtrMplsTpTunnelCommandSwitch
The value vRtrMplsTpTunnelCommandSwitch specifies the switch command to
initiate on a MPLS-TP LSP Tunnel.

When read, this object returns the last command written or 'noCmd (0)'
if no command has been writ…
Enumerationr/w
Enumerated Values:
0noCmd
1clear
2forceSwitch
3manualSwitch
4lockout
.1.3.6.1.4.1.7483.6.1.2.83.2.4.1.1.1
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1 · 1 row entry · 17 columns
The vRtrMplsTpLsrCfgTable maintains the MPLS-TP LSR
configuration information.
vRtrMplsTpLsrCfgEntry entry .1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1
The vRtrMplsTpLsrCfgEntry contains the configuration items
maintained by the vRtrMplsTpLsrCfgTable.
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID vRtrMplsTpLsrPathName
Column Syntax OID
vRtrMplsTpLsrPathName
The value of vRtrMplsTpLsrPathName specifies the unique name of the
MPLS-TP LSR Path.
TN-TC-MIBTNamedItem
Textual Convention: TN-TC-MIBTNamedItem OctetString
Type Constraints:
range: 1..32
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.1
vRtrMplsTpLsrRowStatus
The value of vRtrMplsTpLsrRowStatus specifies the row status of the
MPLS-TP LSR configuration entry.

Rows are created by setting this object to the value 'createAndGo (4)'
and are destroyed by using the v…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.2
vRtrMplsTpLsrLastChangedTime
The value of vRtrMplsTpLsrLastChangedTime indicates the time, since
system startup, that a columnar object in the MPLS-TP LSR entry last
changed state.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.3
vRtrMplsTpLsrAdminState
The value of vRtrMplsTpLsrAdminState specifies the administrative state
of the MPLS-TP LSR.
TN-TC-MIBTmnxAdminStater/w
Textual Convention: TN-TC-MIBTmnxAdminState Enumeration
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.4
vRtrMplsTpLsrOperState
The value of vRtrMplsTpLsrOperState indicates the operational state of
the MPLS-TP LSR.
TN-TC-MIBTmnxOperState
Textual Convention: TN-TC-MIBTmnxOperState Enumeration
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.5
vRtrMplsTpLsrFPInLabel
The value of vRtrMplsTpLsrFPInLabel specifies the forward path (FP)
ingress label used by the MPLS-TP LSR Path.

This object can be set only after vRtrMplsTpLsrFPEnabled is set to
'true'.

On…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.6
vRtrMplsTpLsrFPOutLabel
The value of vRtrMplsTpLsrFPOutLabel specifies the forward path (FP)
egress label used by the MPLS-TP LSR Path.

This object can be set only after vRtrMplsTpLsrFPEnabled is set to
'true'.

On…
Unsigned32r/w
Constraints:
range: 16-1048575
range: 0-0
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.7
vRtrMplsTpLsrFPOutLink
The value of vRtrMplsTpLsrFPOutLink specifies the forward path (FP)
out-link interface used by the MPLS-TP LSR Path.

This object can be set only after vRtrMplsTpLsrFPEnabled is set to
'true'.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.8
vRtrMplsTpLsrFPNextHopAddrType
The value of vRtrMplsTpLsrFPNextHopAddrType, along with
vRtrMplsTpLsrFPNextHopAddress, specifies the forward path (FP)
IP address used as the next hop for the MPLS-TP LSP Path.

This object can be set only…
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.9
vRtrMplsTpLsrFPNextHopAddress
The value of vRtrMplsTpLsrFPNextHopAddress, along with
vRtrMplsTpLsrFPNextHopAddrType, specifies the forward path (FP)
IP address used as the next hop for the MPLS-TP LSR Path.

This object can be set only…
OctetStringr/w
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.10
vRtrMplsTpLsrRPInLabel
The value of vRtrMplsTpLsrRPInLabel specifies the reverse path (RP)
LSP ingress label used by the MPLS-TP LSR Path.

This object can be set only after vRtrMplsTpLsrRPEnabled is set to
'true'.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.11
vRtrMplsTpLsrRPOutLabel
The value of vRtrMplsTpLsrRPOutLabel specifies the reverse path (RP)
LSP egress label used by the MPLS-TP LSR Path.

This object can be set only after vRtrMplsTpLsrRPEnabled is set to
'true'.
Unsigned32r/w
Constraints:
range: 0-0
range: 16-1048575
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.12
vRtrMplsTpLsrRPOutLink
The value of vRtrMplsTpLsrRPOutLink specifies the reverse path (RP)
LSP out-link interface used by the MPLS-TP LSP Path.

This object can be set only after vRtrMplsTpLsrRPEnabled is set to
'true'.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.13
vRtrMplsTpLsrRPNextHopAddrType
The value of vRtrMplsTpLsrRPNextHopAddrType, along with
vRtrMplsTpLsrRPNextHopAddress, specifies the reverse path (RP)
IP address used as the next hop for the MPLS-TP LSP Path.

This object can be set only…
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.14
vRtrMplsTpLsrRPNextHopAddress
The value of vRtrMplsTpLsrRPNextHopAddress, along with
vRtrMplsTpLsrRPNextHopAddrType, specifies the reverse path (RP)
IP address used as the next hop for the MPLS-TP LSR Path.

This object can be set only…
OctetStringr/w
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.15
vRtrMplsTpLsrFPEnabled
The value of vRtrMplsTpLsrFPEnabled specifies whether the forward
path is configured for the LSR path.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.16
vRtrMplsTpLsrRPEnabled
The value of vRtrMplsTpLsrRPEnabled specifies whether the reverse
path is configured for the LSR path.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.7483.6.1.2.83.2.5.1.1.17
.1.3.6.1.4.1.7483.6.1.2.83.2.5.3 · 1 row entry · 9 columns
The vRtrMplsTpLsrPathIdTable maintains the MPLS-TP LSR Path
configuration information.
vRtrMplsTpLsrPathIdEntry entry .1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1
The vRtrMplsTpLsrPathIdEntry contains the configuration items
maintained by the vRtrMplsTpLsrPathIdTable.
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID vRtrMplsTpLsrPathIdSrcGlobalId vRtrMplsTpLsrPathIdSrcNodeId vRtrMplsTpLsrPathIdSrcTunNum vRtrMplsTpLsrPathIdDestGlobalId vRtrMplsTpLsrPathIdDestNodeId vRtrMplsTpLsrPathIdDestTunNum vRtrMplsTpLsrPathIdLspNumber
Column Syntax OID
vRtrMplsTpLsrPathIdSrcGlobalId
The value of vRtrMplsTpLsrPathIdSrcGlobalId specifies the unique node
identifier for the given source global ID.
TN-TC-MIBTmnxMplsTpGlobalID
Textual Convention: TN-TC-MIBTmnxMplsTpGlobalID Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.1
vRtrMplsTpLsrPathIdSrcNodeId
The value of vRtrMplsTpLsrPathIdSrcNodeId specifies the unique node
identifier for the given source node ID.
TN-TC-MIBTmnxMplsTpNodeID
Textual Convention: TN-TC-MIBTmnxMplsTpNodeID Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.2
vRtrMplsTpLsrPathIdSrcTunNum
The value of vRtrMplsTpLsrPathIdSrcTunNum specifies the source tunnel
number of an MPLS-TP Static LSP.
Unsigned32
Constraints:
range: 0-61440
.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.3
vRtrMplsTpLsrPathIdDestGlobalId
The value of vRtrMplsTpLsrPathIdDestGlobalId specifies the unique node
identifier for the given remote global ID.
TN-TC-MIBTmnxMplsTpGlobalID
Textual Convention: TN-TC-MIBTmnxMplsTpGlobalID Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.4
vRtrMplsTpLsrPathIdDestNodeId
The value of vRtrMplsTpLsrPathIdDestNodeId specifies the unique node
identifier for the given remote node ID.
TN-TC-MIBTmnxMplsTpNodeID
Textual Convention: TN-TC-MIBTmnxMplsTpNodeID Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.5
vRtrMplsTpLsrPathIdDestTunNum
The value of vRtrMplsTpLsrPathIdDestTunNum specifies the destination
tunnel number of an MPLS-TP Static LSP.
Unsigned32
Constraints:
range: 0-61440
.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.6
vRtrMplsTpLsrPathIdLspNumber
The value of vRtrMplsTpLsrPathIdLspNumber specifies the MPLS-TP LSP
Path number.
Unsigned32
Constraints:
range: 1-65535
.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.7
vRtrMplsTpLsrPathIdRowStatus
The value of vRtrMplsTpLsrPathIdRowStatus specifies the row status of
the MPLS-TP LSR Path.

Rows are created by setting this object to the value 'createAndGo (4)'
and are destroyed by using the value 'des…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.8
vRtrMplsTpLsrPathIdPathName
The value of vRtrMplsTpLsrPathIdPathName specifies the unique name of
the MPLS-TP LSR Path.

This object MUST be specified on row-creation, and must reference an
existing vRtrMplsTpLsrPathName.
TN-TC-MIBTNamedItemr/w
Textual Convention: TN-TC-MIBTNamedItem OctetString
Type Constraints:
range: 1..32
.1.3.6.1.4.1.7483.6.1.2.83.2.5.3.1.9
.1.3.6.1.4.1.7483.6.1.2.83.3.1.1 · 1 row entry · 9 columns
vRtrMplsTpTunnelTable maintains a list of MPLS-TP tunnels for the
specific router instance.
vRtrMplsTpTunnelEntry entry .1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1
vRtrMplsTpTunnelEntry defines a tunnel to a particular destination in a
specific router context. A tunnel to a specific destination is an
MPLS-TP Static LSP.
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId TN-VRTR-MIBvRtrID vRtrMplsTpTunnelNodeId vRtrMplsTpTunnelGlobalId vRtrMplsTpTunnelPreference vRtrMplsTpTunnelType vRtrMplsTpTunnelID vRtrMplsTpTunnelNextHopAddrType vRtrMplsTpTunnelNextHopAddress
Column Syntax OID
vRtrMplsTpTunnelNodeId
vRtrMplsTpTunnelNodeId indicates the destination node id of this
tunnel.
TN-TC-MIBTmnxMplsTpNodeID
Textual Convention: TN-TC-MIBTmnxMplsTpNodeID Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.1
vRtrMplsTpTunnelGlobalId
vRtrMplsTpTunnelGlobalId indicates the global id of the system.
TN-TC-MIBTmnxMplsTpGlobalID
Textual Convention: TN-TC-MIBTmnxMplsTpGlobalID Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.2
vRtrMplsTpTunnelPreference
The value of vRtrMplsTpTunnelPreference determines the priority of this
tunnel versus the other tunnels from different sources.
This is an absolute number used internally by the system to specify
preferences for the tun…
Unsigned32
Constraints:
range: 1-255
.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.3
vRtrMplsTpTunnelType
The value of vRtrMplsTpTunnelType indicates the type of this tunnel
entity.
TN-TC-MIBTmnxMplsTpTunnelType
Textual Convention: TN-TC-MIBTmnxMplsTpTunnelType Enumeration
Type Values:
1mplsTpStatic
.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.4
vRtrMplsTpTunnelID
The value of vRtrMplsTpTunnelID provides an additional index to
distinguish between multiple tunnels to same destination having
same characteristics.

There could be multiple tunnels for the type 'mplsTpSt…
TN-TC-MIBTmnxTunnelID
Textual Convention: TN-TC-MIBTmnxTunnelID Unsigned32
.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.5
vRtrMplsTpTunnelNextHopAddrType
The value of vRtrMplsTpTunnelNextHopAddrType specifies the address type
of vRtrMplsTpTunnelNextHopAddress.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.6
vRtrMplsTpTunnelNextHopAddress
The value of vRtrMplsTpTunnelNextHopAddress specifies the ip address
of the next hop for the MPLS-TP tunnel and it depends on the value
of vRtrMplsTpTunnelNextHopAddrType.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
range: 20-20
.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.7
vRtrMplsTpTunnelMetric
The value of vRtrMplsTpTunnelMetric indicates the metric of the tunnel.
This is used in addition to the preference for this tunnel.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.8
vRtrMplsTpTunnelAge
The value of vRtrMplsTpTunnelAge indicates the number of seconds since
this tunnel entry was last updated or otherwise determined to be
correct. No semantics of 'too old' can be implied except through
knowledge of owner…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7483.6.1.2.83.3.1.1.1.9