T11-FC-SP-POLICY-MIB Table View

A table containing top-level information about active
FC-SP policies on various Fabrics.

A table of information about active Policy Objects listed
within FC-SP Policy Summary Objects.

A table of Switch Entries in active Switch Membership List
Objects.
          
One Switch Membership List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex.

A table of Node Entries in active Node Membership List
Objects.
          
One Node Membership List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex.

A table of Common Transport Access Descriptors being used
within active Policy Objects.
          
A Common Transport Access Specifier is a list of Common
Transport Access Descriptors that specify whether a Node
is allowed to access a Generic Service or Sub-Server.
          
An active Common Transport Access Specifier is represented
by all rows of this table that have the same values of
fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoCtDescrSpecifierIndex.

A table of active Switch Connectivity Objects.
          
A Switch Connectivity Object defines to which other
Switches or Nodes a particular Switch may/may not be
connected at the Node level and/or at the Port level.

A table of IP Management Entries in active IP Management
List Objects.  An IP Management List Object is a
Fabric-wide Policy Object that describes which IP hosts
are allowed to manage a Fabric.
          
One IP Management List Object is represented by all
of the rows of this table that have the same values
of fcmInstanceIndex and t11FcSpPoFabricIndex.

A table of the Well-Known Protocol Access Descriptors
being used within active Policy Objects.
          
A Well-Known Protocol Access Specifier is a list of
Well-Known Protocol Access Descriptors each of which
specifies a protocol number, a port number, and/or various
flags specifying how IP management access is restricted.
          
A Well-Known Protocol Transport Access Specifier is
represented by all rows of this table that have the
same values of fcmInstanceIndex, t11FcSpPoFabricIndex,
and t11FcSpPoWkpDescrSpecifierIndex.

A table of the Attribute Policy Objects being used within
active Policy Objects.  In the FC-SP Policy Database, each
Attribute Policy Object consists of an Attribute Object Name
and a set of Attribute Entries.
          
An active Attribute Policy Object is represented by all the
Attribute Entries in this table that have the same value
of t11FcSpPoAttribName.

A table of Authentication Protocol Identifier and
Authentication Protocol Parameters that are embedded in
Attribute Policy Objects being used within active Policy
Objects.
          
This table is used for Attribute Entries of Attribute Policy
Objects for which the value of t11FcSpPoAttribType indicates
'AUTH_Negotiate Message Payload' and the value of
t11FcSpPoAttribExtension contains the OID of this table.

A table that allows Activate and Deactivate operations
to be invoked for FC-SP Policies on various Fabrics.
          
Activating a new policy configuration is a two-step
process:
          
 1) create a single Policy Summary Object as a set of rows
    in the t11FcSpPoNaSummaryTable specifying a set of
    Policy Objects that describe the new configuration; and
 2) activate that Policy Summary Object using the
    t11FcSpPoOperActivate object defined in this table.
          
Deactivating the current policy configuration is a one-step
process: the current Policy Summary Object is deactivated
using the t11FcSpPoOperDeActivate object.

A table of non-active Policy Summary Objects available
to be activated.
          
The functionality of this table deviates slightly from FC-SP
in that FC-SP specifies that the only Policy Summary Object
is the Active one, i.e., FC-SP does not store non-active
Policy Summary Objects in the Policy Database.  Instead,
FC-SP requires a new Policy Summary Object to be created
for, and embedded within, every Activate (APS) request.
Thus, the newly created Policy Summary Object outlasts the
APS request only as the new active Policy Summary Object and
only if the APS succeeds.  In contrast, the Activate
operation provided by this MIB module consists of two steps:
          
1) create a non-active Policy Summary Object as a set of
   entries in this table describing a new configuration;
2) activate a Policy Summary Object (stored as a set of
   entries in this table) using t11FcSpPoOperActivate.
          
These two steps are only loosely connected, i.e., the result
of the first operation is a non-active Policy Summary Object
that is retained (in this table) even if it isn't
immediately activated.  Even after an attempt to activate
it succeeds or fails, a non-active Policy Summary Object
is not deleted, but is retained and still available for
subsequent modification/re-use.

A table of non-active Switch Membership List Objects.

A table of Switch Entries in non-active Switch Membership
List Objects.

A table of Node Entries in non-active Node Membership List
Objects.
          
One Node Membership List Object is represented by all
the rows in this table that have the same value of
t11FcSpPoNaNoMembListName.

A table of Common Transport Access Descriptors referenced
by non-active Policy Objects.
          
A Common Transport Access Specifier is a list of Common
Transport Access Descriptors that specify whether a Node
is allowed to access a Generic Service or Sub-Server.
          
A non-active Common Transport Access Specifier is
represented by all rows of this table that have the same
          
values of fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoNaCtDescrSpecifierIndex.

A table of non-active Switch Connectivity Objects.
          
A Switch Connectivity Object defines to which other
Switches or Nodes a particular Switch may/may not be
connected at the Node level and/or at the Port level.

A table of IP Management Entries in non-active IP
Management List Objects.  The IP Management List Object is a
Fabric-wide Policy Object that describes which IP hosts are
allowed to manage a Fabric.
          
One non-active IP Management List Object is represented by
all rows of this table that have the same values of
fcmInstanceIndex and t11FcSpPoFabricIndex.

A table of the Well-Known Protocol Access Descriptors
referenced from non-active Policy Objects.
          
A Well-Known Protocol Access Specifier is a list of
Well-Known Protocol Access Descriptors each of which
specifies a protocol number, a port number, and/or various
flags specifying how IP management access is restricted.
          
A non-active Well-Known Protocol Transport Access Specifier
is represented by all rows of this table that have the same
values of fcmInstanceIndex, t11FcSpPoFabricIndex, and
t11FcSpPoNaWkpDescrSpecifierIndx.

A table of the Attribute Policy Objects being used within
non-active Policy Objects.
          
A non-active Attribute Policy Object is represented by all
the Attribute Entries in this table that have the same
value of t11FcSpPoNaAttribName.

A table of Authentication Protocol Identifier and
Authentication Protocol Parameters that are embedded in
Attribute Policy Objects being used within non-active
Policy Objects.
          
This table is used for Attribute Entries of Attribute Policy
Objects for which the value of t11FcSpPoNaAttribType
indicates 'AUTH_Negotiate Message Payload' and the value of
t11FcSpPoNaAttribExtension contains the OID of this table.

A table of statistics maintained by FC-SP Security
Policy Servers.

A table of control information, including the memory
realization of FC-SP Policy Databases, and concerning
the generation of notifications due to FC-SP
Policy-related events.