T11-FC-FABRIC-LOCK-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
11
t11FLockTable
table.1.3.6.1.2.1.159.1.1.1
·
1 row entry
·
11 columns
A table containing information about the 'managing'
switch of each current Fabric lock, e.g., for the
types of Servers defined in FC-GS-5.
Each entry in this table represents either:
1) a current Fabric lock,
2) an in-progress attempt, requested via SNMP, to set up
a lock, or
3) a failed attempt, requested via SNMP, to set up a lock.
If an entry is created via t11FLockRowStatus, but the
attempt to obtain the lock fails, then the entry continues
to exist until it is deleted via t11FLockRowStatus, or
it is overwritten by the lock being established via
a means other than SNMP. However, rows created via
t11FLockRowStatus are not retained over restarts.
Each entry contains information specific to a current
Fabric lock set up by a particular 'managing' switch on a
particular Fabric. The 'managing switch' is identified by
values of fcmInstanceIndex and fcmSwitchIndex.
…
Fabric lock set up by a particular 'managing' switch on a
particular Fabric. The 'managing switch' is identified by
values of fcmInstanceIndex and fcmSwitchIndex.
…
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
t11FLockFabricIndex
A unique index value that uniquely identifies a
particular Fabric. In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics can operate within one (or more) physical infrastructures, and this index val… |
T11-TC-MIBT11FabricIndex Textual Convention: T11-TC-MIBT11FabricIndex Unsigned32Type Constraints: range: 0..4095 |
.1.3.6.1.2.1.159.1.1.1.1.1 |
||||||||||||||||||||||||
|
t11FLockApplicationID
The Application_ID value that identifies the type of
application for which the Fabric is locked. A lock established via Acquire Change Authorization (ACA) does not, strictly speaking, have an Application_… |
OctetString Constraints: range: 1-1 |
.1.3.6.1.2.1.159.1.1.1.1.2 |
||||||||||||||||||||||||
|
t11FLockInitiatorType
This object specifies what type of initiator generated
the request that caused this lock to be established: other - none of the following. ssb - this lock was established … |
Enumeration Enumerated Values:
|
.1.3.6.1.2.1.159.1.1.1.1.3 |
||||||||||||||||||||||||
|
t11FLockInitiator
This object specifies the initiator whose request
caused this lock to be established. If the value of the corresponding instance of t11FLockInitiatorType is 'ssb', this object will contain the FC_ID of th… |
OctetString Constraints: range: 0-64 |
.1.3.6.1.2.1.159.1.1.1.1.4 |
||||||||||||||||||||||||
|
t11FLockInitiatorIpAddrType
This object specifies the type of IP address contained
in the corresponding instance of t11FLockInitiatorIpAddr. If the IP address of the location of the initiator is unknown or not applicable, this object has the value… |
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.2.1.159.1.1.1.1.5 |
||||||||||||||||||||||||
|
t11FLockInitiatorIpAddr
This object specifies the IP address of the location
of the initiator that established this lock via a request of the type given by the corresponding instance of t11FLockInitiatorType. In cases where the corresponding … |
INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.2.1.159.1.1.1.1.6 |
||||||||||||||||||||||||
|
t11FLockStatus
This object gives the current status of the lock:
'active' -- the lock is currently established. 'settingUp' -- the 'managing' switch is currently attempting to set up the lo… |
Enumeration Enumerated Values:
|
.1.3.6.1.2.1.159.1.1.1.1.7 |
||||||||||||||||||||||||
|
t11FLockRejectReasonCode
When the value of the corresponding instance of
t11FLockStatus is 'rejectFailure', this object contains the rejection's reason code. |
T11-FC-NAME-SERVER-MIBT11NsGs4RejectReasonCode Textual Convention: T11-FC-NAME-SERVER-MIBT11NsGs4RejectReasonCode EnumerationType Values:
|
.1.3.6.1.2.1.159.1.1.1.1.8 |
||||||||||||||||||||||||
|
t11FLockRejectReasonCodeExp
When the value of the corresponding instance of
t11FLockStatus is 'rejectFailure', this object contains the rejection's reason code explanation. |
OctetString Constraints: range: 0-1 |
.1.3.6.1.2.1.159.1.1.1.1.9 |
||||||||||||||||||||||||
|
t11FLockRejectReasonVendorCode
When the value of the corresponding instance of
t11FLockStatus is 'rejectFailure', this object contains the rejection's vendor-specific code. |
OctetString Constraints: range: 0-1 |
.1.3.6.1.2.1.159.1.1.1.1.10 |
||||||||||||||||||||||||
|
t11FLockRowStatus
The status of this conceptual row.
A row in this table can be modified or deleted via this object only when the row's value of t11FLockInitiatorType is 'snmp'. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.159.1.1.1.1.11 |