SUPERMICRO-TAC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
18

fsTacMcastProfileTable

table
.1.3.6.1.4.1.10876.101.2.8.2.1 · 1 row entry · 5 columns
Open in standard view 
This table contains multicast profiles, which is used to filter
incoming IGMP/MLDP reports from customers.
fsTacMcastProfileEntry entry .1.3.6.1.4.1.10876.101.2.8.2.1.1
Each profile table entry will contain a table of multicast
information and an access rule (permit or deny).
Indexes
fsTacMcastProfileId fsTacMcastProfileAddrType
Column Syntax OID
fsTacMcastProfileId
Identifier for the multicast profile entry.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.10876.101.2.8.2.1.1.1
fsTacMcastProfileAddrType
Indicates whether the configured rule is for
IPv4 or IPv6 address.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.10876.101.2.8.2.1.1.2
fsTacMcastProfileAction
Indicates whether to allow or deny the channels associated
with this profile.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.10876.101.2.8.2.1.1.3
fsTacMcastProfileDescription
Description for the profile entry.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.10876.101.2.8.2.1.1.4
fsTacMcastProfileStatus
The status of a row in the multicast profile table. Using this
object new entries can be created in the multicast profile table
or the existing entries can be removed.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.8.2.1.1.5

fsTacMcastPrfFilterTable

table
.1.3.6.1.4.1.10876.101.2.8.2.2 · 1 row entry · 6 columns
Open in standard view 
Each multicast profile entry will contain a table of filters
for channels. The filter rule may contain a range of group
and source addresses or specific addresses. A filter rule 
with source address as wild card is used to filter based on 
groups.
fsTacMcastPrfFilterEntry entry .1.3.6.1.4.1.10876.101.2.8.2.2.1
Each filter entry can contain entries of the form (Ss-Se, Gs-Ge)
or (*, Gs-Ge) or (Ss-Se, *) or (*,*),
where 'S' refers to a multicast source address,
'G' refers to a multicast group address, 's' refers to start
addre…
Indexes
fsTacMcastProfileId fsTacMcastProfileAddrType fsTacMcastPrfFilterGrpStartAddr fsTacMcastPrfFilterGrpEndAddr fsTacMcastPrfFilterSrcStartAddr fsTacMcastPrfFilterSrcEndAddr
Column Syntax OID
fsTacMcastPrfFilterGrpStartAddr
This object will contain a multicast group address, which
will be the start of multicast group address range.
This can be a particular multicast address or 0.0.0.0
which indicates that it is a wild card. For configuring…
OctetString
Constraints:
range: 4-16
 .1.3.6.1.4.1.10876.101.2.8.2.2.1.1
fsTacMcastPrfFilterGrpEndAddr
This object will contain a multicast group address, which
will be the end of multicast group address range.
This can be a particular multicast address or 0.0.0.0
which indicates that it is a wild card. The end address
c…
OctetString
Constraints:
range: 4-16
 .1.3.6.1.4.1.10876.101.2.8.2.2.1.2
fsTacMcastPrfFilterSrcStartAddr
This object will contain a multicast source address, which
will be the start of multicast source address range.
This can be a particular ip address or 0.0.0.0
which indicates that it is a wild card. For configuring a
s…
OctetString
Constraints:
range: 4-16
 .1.3.6.1.4.1.10876.101.2.8.2.2.1.3
fsTacMcastPrfFilterSrcEndAddr
This object will contain a multicast source address, which
will be the end of multicast source address range.
This can be a particular ip address or 0.0.0.0
which indicates that it is a wild card. The end address
cannot…
OctetString
Constraints:
range: 4-16
 .1.3.6.1.4.1.10876.101.2.8.2.2.1.4
fsTacMcastPrfFilterMode
This object decides the type of packets to be filtered.
'Include' or 'exclude' is used to apply the filter for include
and exclude IGMP/MLD reports respectively. The option 'any'
is used to apply the filter for all th…
Enumerationr/w
Enumerated Values:
1include
2exclude
3any
 .1.3.6.1.4.1.10876.101.2.8.2.2.1.5
fsTacMcastPrfFilterStatus
This object is the status of a row in the multicast filter
rule entry. Using this object new entries can be
created in the multicast filter rule table or the existing
entries can be removed or updated.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.8.2.2.1.6

fsTacMcastChannelTable

table
.1.3.6.1.4.1.10876.101.2.8.3.1 · 1 row entry · 5 columns
Open in standard view 
This table contains the attributes associated with different
multicast channels i.e. (S, G) entries. If there is a need to 
associate attributes per group, it can be done by giving source 
address as zero.
fsTacMcastChannelEntry entry .1.3.6.1.4.1.10876.101.2.8.3.1.1
A particular entry contains the informations about a particular
multicast channel.
Indexes
fsTacMcastChannelAddressType fsTacMcastChannelGrpAddress fsTacMcastChannelSrcAddress
Column Syntax OID
fsTacMcastChannelAddressType
Indicates whether the channel entry is for IGMP/MLDP.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.10876.101.2.8.3.1.1.1
fsTacMcastChannelGrpAddress
Multicast group address of this channel.
OctetString
Constraints:
range: 4-16
 .1.3.6.1.4.1.10876.101.2.8.3.1.1.2
fsTacMcastChannelSrcAddress
Multicast source address of this channel. This object can be zero.
If it is zero, it represent the bandwidth for the group,
irrespective of the multicast source.
OctetString
Constraints:
range: 4-16
 .1.3.6.1.4.1.10876.101.2.8.3.1.1.3
fsTacMcastChannelBandWidth
The bandwidth that will be required for this channel in Kbps.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.8.3.1.1.4
fsTacMcastChannelRowStatus
With this rowstatus object, we can add/delete entries to/from
channel table. If there is no row in this table for a channel,
that channel will be assumed to have default attributes.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.8.3.1.1.5

fsTacMcastPrfStatsTable

table
.1.3.6.1.4.1.10876.101.2.8.4.1 · 1 row entry · 2 columns
Open in standard view 
This table contains the statistics related to profile table
fsTacMcastPrfStatsEntry entry .1.3.6.1.4.1.10876.101.2.8.4.1.1
A particular entry contains the statistics about a particular
profile.
Indexes
fsTacMcastProfileId fsTacMcastProfileAddrType
Column Syntax OID
fsTacMcastPrfStatsPortRefCnt
The number of profile-to-port mappings configured.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.8.4.1.1.1
fsTacMcastPrfStatsVlanRefCnt
The number of profile-to-VLAN mappings configured in the
entire system.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.8.4.1.1.2