SUPERMICRO-IPSECV6-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
57

fsipv6SecSelectorTable

table
.1.3.6.1.4.1.10876.101.1.29.2.1 · 1 row entry · 9 columns
Open in standard view 
The list of selectors for the interface.
fsIpv6SecSelectorEntry entry .1.3.6.1.4.1.10876.101.1.29.2.1.1
An entry in the Selector Table. Each entry
is a set of IP or Upper layer protocol
fields used by security policy database to
map to security association entry or bundle.
Indexes
fsipv6SelIfIndex fsipv6SelProtoIndex fsipv6SelAccessIndex fsipv6SelPort fsipv6SelPktDirection
Column Syntax OID
fsipv6SelIfIndex
The index value which uniquely identifies
the IPv6 interface on which this Selector
Table entry exists. The interface indentified
by a particular value of this index is the same
interface as identified by the value o…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.1.29.2.1.1.1
fsipv6SelProtoIndex
The Proto index value which uniquely identifies
the protocol for which this Selector Table entry
exists.In case of no specific protocol any can be
used whose value is assigned as 9000
Enumeration
Enumerated Values:
6tcp
17udp
50espproto
51ahproto
58icmpv6
9000any
 .1.3.6.1.4.1.10876.101.1.29.2.1.1.2
fsipv6SelAccessIndex
This value of the object is same as that of the
index of the access table. This index can be used
to get a range of source and destination IPv6 addresses
from the access table for validating the src and destination
ad…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.1.29.2.1.1.3
fsipv6SelPort
Port to Specify the user application for
a given protocol.In case of no specific port
any can be used whose value is assigned to 9000
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.1.29.2.1.1.4
fsipv6SelPktDirection
Decides the Packet Direction
Enumeration
Enumerated Values:
1inbound
2outbound
3any
 .1.3.6.1.4.1.10876.101.1.29.2.1.1.5
fsipv6SelFilterFlag
Flag to specify the filtering of the packets
based on the protocol field.
Enumerationr/w
Enumerated Values:
1filter
2allow
 .1.3.6.1.4.1.10876.101.1.29.2.1.1.6
fsipv6SelPolicyIndex
The value of this object is same as that of
the index of the security policy table. This
object can be configured only when there is a
corresponding entry for the specified value in
the policy table.This object canno…
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.1.29.2.1.1.7
fsipv6SelIfIpAddress
A unique non-zero value identifying the local
tunnel termination address. This
object should be set when working with IKE
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.29.2.1.1.8
fsipv6SelStatus
This object is used to create and delete rows
from the fsipv6SecSelectorTable. It can be set
to the value of createAndGo(4),createAndWait(5),
notInService(2),active(1) and destroy(6).
This object can be configured onl…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.1.29.2.1.1.9

fsipv6SecAccessTable

table
.1.3.6.1.4.1.10876.101.1.29.2.2 · 1 row entry · 6 columns
Open in standard view 
Range of Ip addresses allowed for a domain
fsIpv6SecAccessEntry entry .1.3.6.1.4.1.10876.101.1.29.2.2.1
An entry in the access Table that specifies
the range of address allowed for a domain
Indexes
fsipv6SecAccessIndex
Column Syntax OID
fsipv6SecAccessIndex
This value of the object is used to get a unique
entry in the access table. This index is used
by the selector table to get an entry from the
access table. This index is used to get a
range of source IPv6 addresses fr…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.1.29.2.2.1.1
fsipv6SecAccessStatus
This object is used to create and delete rows
from the fsipv6SecAccessTable. It can be set
to the value of createAndGo(4),createAndWait(5),
notInService(2),active(1) and destroy(6).
This object can be configured only …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.1.29.2.2.1.2
fsipv6SecSrcNet
A unique non-zero value identifying the source IPv6
network for a given access index.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.29.2.2.1.3
fsipv6SecSrcAddrPrefixLen
The length of the prefix (in bits) associated with the
IPv6 source address of this entry.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.10876.101.1.29.2.2.1.4
fsipv6SecDestNet
A unique non-zero value identifying the destination IPv6
network for a given access index.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.29.2.2.1.5
fsipv6SecDestAddrPrefixLen
The length of the prefix (in bits) associated with the
IPv6 destination address of this entry.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.10876.101.1.29.2.2.1.6

fsipv6SecPolicyTable

table
.1.3.6.1.4.1.10876.101.1.29.2.3 · 1 row entry · 6 columns
Open in standard view 
List of policies that determine the disposition
of all IP traffic
fsIpv6SecPolicyEntry entry .1.3.6.1.4.1.10876.101.1.29.2.3.1
An entry in the Security Policy Table that
specifies what services are to be offered to
IP datagrams and in what fashion.
Indexes
fsipv6SecPolicyIndex
Column Syntax OID
fsipv6SecPolicyIndex
A unique non-zero value identifying the particular
security policy entry.This index is used by the
the selector table to get the policy entry for a
given selector entry
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.1.29.2.3.1.1
fsipv6SecPolicyFlag
The choices that can be applied on
any outbound/inbound datagrams.
Enumerationr/w
Enumerated Values:
3apply
4bypass
 .1.3.6.1.4.1.10876.101.1.29.2.3.1.2
fsipv6SecPolicyMode
The mode of creation of security association
entries.
Enumerationr/w
Enumerated Values:
1manual
2automatic
 .1.3.6.1.4.1.10876.101.1.29.2.3.1.3
fsipv6SecPolicySaBundle
This object is used to associate Security
association entries with each policy entry.
The Policy entry is mapped to the secassoc
entries by specifying the secassoc indicies
in the format (1.2.3.4) where (1,2,3,4) are…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.1.29.2.3.1.4
fsipv6SecPolicyOptionsIndex
Refers to the IKE Options.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.1.29.2.3.1.5
fsipv6SecPolicyStatus
This object is used to create and delete rows
from the fsipv6SecPolicyTable. It can be set
to the value of createAndGo(4),createAndWait(5),
notInService(2),active(1) and destroy(6).
This object can be configured only …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.1.29.2.3.1.6

fsipv6SecAssocTable

table
.1.3.6.1.4.1.10876.101.1.29.2.4 · 1 row entry · 15 columns
Open in standard view 
This table contains the security association 
between a source and destination. It is 
consulted for authentication and Ciphering of 
inbound and outbound datagrams.Datagrams which 
are forwarded by this entity are not authenticated.
fsipv6SecAssocEntry entry .1.3.6.1.4.1.10876.101.1.29.2.4.1
An entry in the IPv6 Security Association Table.
Each entry specifies the mapping between a
particular source and destination address. The
entry specifies the authentication algorithm and
key to use, the direction o…
Indexes
fsipv6SecAssocIndex
Column Syntax OID
fsipv6SecAssocIndex
A unique non-zero value identifying the
particular Security Association.
This index value is used by the object
fsipv6SecPolicySaBundle of the policy
table to associate the policy entries to
the secassoc entries
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.1
fsipv6SecAssocDstAddr
This destination address is matched with the
destination address in the packet during
authentication of inbound and outbound datagrams.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.2
fsipv6SecAssocProtocol
Security header used for either authentication
(AH) or encryption (ESP).
Enumerationr/w
Enumerated Values:
50espproto
51ahproto
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.3
fsipv6SecAssocSpi
This is an arbitrary 32-bit value identifying
the security association for this datagram. The
Security Parameter Index value 0 is reserved to
Indicate that 'no security association exists'.
The set of Security Parameter…
Integer32r/w
Constraints:
range: 256-2147483647
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.4
fsipv6SecAssocMode
The supporting security association mode.
The secassoc mode is configured as Transport or Tunnel
when the router is acting as a host. A Security gateway
can be configured only in tunnel mode
Enumerationr/w
Enumerated Values:
1tunnel
2transport
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.5
fsipv6SecAssocAhAlgo
The authentication algorithm configured for
the particular security association entry.
This object is not mandatory for creation
of an entry.Setting the algorithm to keyed-md5(2)
or hmac-md5 (3),hmacsha1(4) requires a k…
Enumerationr/w
Enumerated Values:
0null
1hmacmd5
2hmacsha1
3keyedmd5
4md5
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.6
fsipv6SecAssocAhKey
This is the key used for authentication
when the algorithm configured is either
keyed-md5 or hmac-md5 or hmach-sha1 .
This object is not mandatory for creation
of an entry. If the algorithm is md5,
no key needs to…
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.7
fsipv6SecAssocEspAlgo
The type of algorithm used for Encapsulation
Security Palyload (ESP) Header.This object is to
be configured only if the Security protocol to be
used is ESP
Enumerationr/w
Enumerated Values:
2descbc
3threedescbc
11null
12aes
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.8
fsipv6SecAssocEspKey
ESP authentication key.This must be of
8 Bytes only
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.9
fsipv6SecAssocEspKey2
This object is used for configuring the second key
of 3des-cbc.This key must be 8 Bytes only
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.10
fsipv6SecAssocEspKey3
This object is used for configuring the third key
of 3des-cbc.This key must be 8 Bytes only
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.11
fsipv6SecAssocLifetimeInBytes
The timer interval interms of number of bytes.
IPSEC counts the number of bytes to which the
IPSEC algorithm is applied. This object specifies the
allowed maximum number of bytes. If the value is 0,
it signifies that th…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.12
fsipv6SecAssocLifetime
This specifies the duration in seconds for which
this Security Association remains active. After this
time interval, the entry becomes inactive and has to
be manually made active again. If the value is 0,
it signifies t…
Integer32r/w
Constraints:
range: 300-2592000
range: 0-0
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.13
fsipv6SecAssocAntiReplay
The object is used for activating the anti
repaly functionality of the security protocols
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.14
fsipv6SecAssocStatus
This object is used to create and delete rows
from the fsipv6SecAssocTable. It can be set
to the value of createAndGo(4),createAndWait(5),
notInService(2),active(1) and destroy(6).
This object can be configured only w…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.1.29.2.4.1.15

fsipv6SecIfStatsTable

table
.1.3.6.1.4.1.10876.101.1.29.3.1 · 1 row entry · 6 columns
Open in standard view 
IPSEC statistics table based on per interface.
fsIpv6SecIfStatsEntry entry .1.3.6.1.4.1.10876.101.1.29.3.1.1
An entry in the Interface Statistics table.
Indexes
fsipv6SecIfIndex
Column Syntax OID
fsipv6SecIfIndex
The index value which uniquely identifies
the IPv6 interface on which this interface
statistics table entry exists. The interface
identified by a particular value of this index is
the same interface as identified by …
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.10876.101.1.29.3.1.1.1
fsipv6SecIfInPkts
Number of packets recieved on the specified
interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.1.1.2
fsipv6SecIfOutPkts
Number of packets sent on the specified
interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.1.1.3
fsipv6SecIfPktsApply
Number of packets for which security is
applied which are of either inbound or
outbound.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.1.1.4
fsipv6SecIfPktsDiscard
Number of packets dropped either of
inbound or outbound.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.1.1.5
fsipv6SecIfPktsBypass
Number of packets for which IPSEC is not
applied which are of either inbound
or outbound.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.1.1.6

fsipv6SecAhEspStatsTable

table
.1.3.6.1.4.1.10876.101.1.29.3.2 · 1 row entry · 9 columns
Open in standard view 
AH/ESP related statistics table.
fsIpv6SecAhEspStatsEntry entry .1.3.6.1.4.1.10876.101.1.29.3.2.1
An entry in the AH/ESP statistics Table.
Indexes
fsipv6SecAhEspIfIndex
Column Syntax OID
fsipv6SecAhEspIfIndex
The index value which uniquely identifies
the IPv6 interface on which this statistics
table entry exists. The interface identified by a
particular value of this index is the same
interface as identified by the same…
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.10876.101.1.29.3.2.1.1
fsipv6SecInAhPkts
Number of AH packets recieved.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.2.1.2
fsipv6SecOutAhPkts
Number of AH packets sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.2.1.3
fsipv6SecAhPktsAllow
Number of AH packets allowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.2.1.4
fsipv6SecAhPktsDiscard
Number of AH packets discarded.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.2.1.5
fsipv6SecInEspPkts
Number of ESP packets received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.2.1.6
fsipv6SecOutEspPkts
Number of ESP packets sent.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.2.1.7
fsipv6SecEspPktsAllow
Number of ESP packets allowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.2.1.8
fsipv6SecEspPktsDiscard
Number of ESP packets discarded.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.2.1.9

fsipv6SecAhEspIntruTable

table
.1.3.6.1.4.1.10876.101.1.29.3.3 · 1 row entry · 6 columns
Open in standard view 
AH/ESP related Intru table.
fsIpv6SecAhEspIntruEntry entry .1.3.6.1.4.1.10876.101.1.29.3.3.1
An entry in the AH/ESP intruder Table.
Indexes
fsipv6SecAhEspIntruIndex
Column Syntax OID
fsipv6SecAhEspIntruIndex
Specifies the index of the entry in the table.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.1.29.3.3.1.1
fsipv6SecAhEspIntruIfIndex
The index value which uniquely identifies
the IPv6 interface on which this statistics
table entry exists. The interface identified
by a particular value of this index is the same
interface as identified by the same …
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.10876.101.1.29.3.3.1.2
fsipv6SecAhEspIntruSrcAddr
Intru's source address.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.29.3.3.1.3
fsipv6SecAhEspIntruDestAddr
Intru's destination address.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.10876.101.1.29.3.3.1.4
fsipv6SecAhEspIntruProto
Intru's Protocol.
Enumeration
Enumerated Values:
50espproto
51ahproto
 .1.3.6.1.4.1.10876.101.1.29.3.3.1.5
fsipv6SecAhEspIntruTime
Time of intruders attack.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.1.29.3.3.1.6