SMC6152L2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

298

switchInfoTable

table

.1.3.6.1.4.1.202.20.66.1.1.3 · 1 row entry · 13 columns

Open in standard view

Table of descriptive and status information about
the switch units in this system.

switchInfoEntry entry .1.3.6.1.4.1.202.20.66.1.1.3.1

Table providing descriptions and status information for
switch units.

Indexes

swUnitIndex

Column Syntax OID

swUnitIndex

This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.1.3.1.1

swHardwareVer

Hardware version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.202.20.66.1.1.3.1.2

swMicrocodeVer

Microcode version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.202.20.66.1.1.3.1.3

swLoaderVer

Loader version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.202.20.66.1.1.3.1.4

swBootRomVer

Boot ROM code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.202.20.66.1.1.3.1.5

swOpCodeVer

Operation code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.202.20.66.1.1.3.1.6

swPortNumber

The number of ports on this switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.1.3.1.7

swPowerStatus

Indicates the switch using internalPower(1),
redundantPower(2) or both(3)

Enumeration

Enumerated Values:

1	internalPower
2	redundantPower
3	internalAndRedundantPower

.1.3.6.1.4.1.202.20.66.1.1.3.1.8

swRoleInSystem

Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system.

Enumeration

Enumerated Values:

1	master
2	backupMaster
3	slave

.1.3.6.1.4.1.202.20.66.1.1.3.1.9

swSerialNumber

Serial number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.202.20.66.1.1.3.1.10

swServiceTag

Service tag serial-number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.202.20.66.1.1.3.1.13

swModelNumber

Model number of the switch.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.202.20.66.1.1.3.1.14

swEpldVer

The EPLD version of the switch.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.202.20.66.1.1.3.1.15

portTable

table

.1.3.6.1.4.1.202.20.66.1.2.1 · 1 row entry · 11 columns

Open in standard view

Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk.

portEntry entry .1.3.6.1.4.1.202.20.66.1.2.1.1

An entry in the table, describing the configuration of
one switch port or trunk.

Indexes

portIndex

Column Syntax OID

portIndex

The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.2.1.1.1

portName

The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later).

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.202.20.66.1.2.1.1.2

portType

Indicates the port type of the configuration of the switch.

Enumeration

Enumerated Values:

1	other
2	hundredBaseTX
3	hundredBaseFX
4	thousandBaseSX
5	thousandBaseLX
6	thousandBaseT
7	thousandBaseGBIC
8	thousandBaseSfp
9	hundredBaseFxScSingleMode
10	hundredBaseFxScMultiMode
11	thousandBaseCX
12	tenG

.1.3.6.1.4.1.202.20.66.1.2.1.1.3

portSpeedDpxCfg

Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half…

Enumerationr/w

Enumerated Values:

1	reserved
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000
8	halfDuplex10g
9	fullDuplex10g

.1.3.6.1.4.1.202.20.66.1.2.1.1.4

portFlowCtrlCfg

(1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
5	tx
6	rx

.1.3.6.1.4.1.202.20.66.1.2.1.1.5

portCapabilities

Port or trunk capabilities.

Bitsr/w

Enumerated Values:

0	portCap10half
1	portCap10full
2	portCap100half
3	portCap100full
4	portCap1000half
5	portCap1000full
6	portCap10gHalf
7	portCap10gFull
8	reserved8
9	reserved9
10	reserved10
11	reserved11
12	reserved12
13	reserved13
14	portCapSym
15	portCapFlowCtrl

.1.3.6.1.4.1.202.20.66.1.2.1.1.6

portAutonegotiation

Whether auto-negotiation is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.2.1.1.7

portSpeedDpxStatus

The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case t…

Enumeration

Enumerated Values:

1	error
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000
8	halfDuplex10g
9	fullDuplex10g

.1.3.6.1.4.1.202.20.66.1.2.1.1.8

portFlowCtrlStatus

(2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently confi…

Enumeration

Enumerated Values:

1	error
2	backPressure
3	dot3xFlowControl
4	none

.1.3.6.1.4.1.202.20.66.1.2.1.1.9

portTrunkIndex

The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trunkIndex, defined by the
corresponding tru…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.2.1.1.10

portComboForcedMode

This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal…

Enumerationr/w

Enumerated Values:

1	none
2	copperForced
3	copperPreferredAuto
4	sfpForced
5	sfpPreferredAuto

.1.3.6.1.4.1.202.20.66.1.2.1.1.12

trunkTable

table

.1.3.6.1.4.1.202.20.66.1.3.3 · 1 row entry · 4 columns

Open in standard view

Table describing the configuration and status of each
trunk.

trunkEntry entry .1.3.6.1.4.1.202.20.66.1.3.3.1

An entry describing the configuration and status of a
particular trunk.

Indexes

trunkIndex

Column Syntax OID

trunkIndex

Identifies the trunk within the switch that is
described by the table entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.3.3.1.1

trunkPorts

The complete set of ports currently associated with
this trunk.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.202.20.66.1.3.3.1.2

trunkCreation

A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk.

Enumeration

Enumerated Values:

1	static
2	lacp

.1.3.6.1.4.1.202.20.66.1.3.3.1.3

trunkStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.3.3.1.4

lacpPortTable

table

.1.3.6.1.4.1.202.20.66.1.4.1 · 1 row entry · 2 columns

Open in standard view

Table for LACP port configuration.

lacpPortEntry entry .1.3.6.1.4.1.202.20.66.1.4.1.1

Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.

Indexes

lacpPortIndex

Column Syntax OID

lacpPortIndex

The port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.4.1.1.1

lacpPortStatus

Whether 802.3ad LACP is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.4.1.1.2

staPortTable

table

.1.3.6.1.4.1.202.20.66.1.5.2 · 1 row entry · 9 columns

Open in standard view

The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType.

staPortEntry entry .1.3.6.1.4.1.202.20.66.1.5.2.1

The conceptual entry of staPortTable.

Indexes

No indexes recorded

Column Syntax OID

staPortFastForward

Whether fast forwarding is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.5.2.1.2

staPortProtocolMigration

When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.202.20.66.1.5.2.1.3

staPortAdminEdgePort

The administrative value of the edge port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port and a value of false(2) indicates
that this port should be assumed as a non-edge-port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.202.20.66.1.5.2.1.4

staPortOperEdgePort

The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.202.20.66.1.5.2.1.5

staPortAdminPointToPoint

The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of f…

Enumerationr/w

Enumerated Values:

0	forceTrue
1	forceFalse
2	auto

.1.3.6.1.4.1.202.20.66.1.5.2.1.6

staPortOperPointToPoint

The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-de…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.202.20.66.1.5.2.1.7

staPortSystemStatus

Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.5.2.1.9

staPortLongAdminPathCost

The admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This obje…

Integer32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.202.20.66.1.5.2.1.10

staPortLongOperPathCost

The oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This objec…

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.202.20.66.1.5.2.1.11

mirrorTable

table

.1.3.6.1.4.1.202.20.66.1.8.1 · 1 row entry · 4 columns

Open in standard view

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

mirrorEntry entry .1.3.6.1.4.1.202.20.66.1.8.1.1

The conceptual row of mirrorTable.

Indexes

mirrorDestinationPort mirrorSourcePort

Column Syntax OID

mirrorDestinationPort

The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.8.1.1.1

mirrorSourcePort

The source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.8.1.1.2

mirrorType

If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored.

Enumerationr/w

Enumerated Values:

1	rx
2	tx
3	both

.1.3.6.1.4.1.202.20.66.1.8.1.1.3

mirrorStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.8.1.1.4

igmpSnoopRouterCurrentTable

table

.1.3.6.1.4.1.202.20.66.1.9.8 · 1 row entry · 3 columns

Open in standard view

Table for current router ports.

igmpSnoopRouterCurrentEntry entry .1.3.6.1.4.1.202.20.66.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.202.20.66.1.9.8.1.1`
igmpSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.202.20.66.1.9.8.1.2`
igmpSnoopRouterCurrentStatus The set of ports which are static router ports.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.202.20.66.1.9.8.1.3`

igmpSnoopRouterStaticTable

table

.1.3.6.1.4.1.202.20.66.1.9.9 · 1 row entry · 3 columns

Open in standard view

Table for static router ports.

igmpSnoopRouterStaticEntry entry .1.3.6.1.4.1.202.20.66.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column Syntax OID

igmpSnoopRouterStaticVlanIndex

The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRou…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.202.20.66.1.9.9.1.1

igmpSnoopRouterStaticPorts

The set of ports which are static router ports.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.202.20.66.1.9.9.1.2

igmpSnoopRouterStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.9.9.1.3

igmpSnoopMulticastCurrentTable

table

.1.3.6.1.4.1.202.20.66.1.9.10 · 1 row entry · 4 columns

Open in standard view

Table for current multicast addresses.

igmpSnoopMulticastCurrentEntry entry .1.3.6.1.4.1.202.20.66.1.9.10.1

Entry for current multicast addresses.

Indexes

igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress

Column	Syntax	OID
igmpSnoopMulticastCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.202.20.66.1.9.10.1.1`
igmpSnoopMulticastCurrentIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.202.20.66.1.9.10.1.2`
igmpSnoopMulticastCurrentPorts The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.202.20.66.1.9.10.1.3`
igmpSnoopMulticastCurrentStatus The set of ports which are static members.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.202.20.66.1.9.10.1.4`

igmpSnoopMulticastStaticTable

table

.1.3.6.1.4.1.202.20.66.1.9.11 · 1 row entry · 4 columns

Open in standard view

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry entry .1.3.6.1.4.1.202.20.66.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column Syntax OID

igmpSnoopMulticastStaticVlanIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.202.20.66.1.9.11.1.1

igmpSnoopMulticastStaticIpAddress

IP address of multicast group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.9.11.1.2

igmpSnoopMulticastStaticPorts

The set of ports which are members.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.202.20.66.1.9.11.1.3

igmpSnoopMulticastStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.9.11.1.4

igmpSnoopCurrentVlanTable

table

.1.3.6.1.4.1.202.20.66.1.9.14 · 1 row entry · 2 columns

Open in standard view

Table for enabling or disabling IGMP snooping per VLAN.

igmpSnoopCurrentVlanEntry entry .1.3.6.1.4.1.202.20.66.1.9.14.1

Entry for enabling or disabling IGMP snooping.

Indexes

igmpSnoopCurrentVlanIndex

Column Syntax OID

igmpSnoopCurrentVlanIndex

Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.202.20.66.1.9.14.1.1

igmpSnoopCurrentVlanImmediateLeave

The parameter to enable or disable the Immediate-Leave feature on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.9.14.1.3

igmpSnoopProfileTable

table

.1.3.6.1.4.1.202.20.66.1.9.18 · 1 row entry · 3 columns

Open in standard view

The table for configuring the IGMP snooping profile.

igmpSnoopProfileEntry entry .1.3.6.1.4.1.202.20.66.1.9.18.1

The entry for configuring the IGMP snooping profile.

Indexes

igmpSnoopProfileId

Column Syntax OID

igmpSnoopProfileId

The ID of the IGMP snooping profile.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.202.20.66.1.9.18.1.1

igmpSnoopProfileAction

The access mode of the IGMP snooping profile.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.202.20.66.1.9.18.1.2

igmpSnoopProfileStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.9.18.1.3

igmpSnoopProfileRangeTable

table

.1.3.6.1.4.1.202.20.66.1.9.20 · 1 row entry · 5 columns

Open in standard view

The table for configuring the range of the IGMP snooping profile.

igmpSnoopProfileRangeEntry entry .1.3.6.1.4.1.202.20.66.1.9.20.1

The entry for configuring the range of the IGMP snooping profile.

Indexes

igmpSnoopProfileRangeProfileId igmpSnoopProfileRangeInetAddressType igmpSnoopProfileRangeStartInetAddress

Column Syntax OID

igmpSnoopProfileRangeProfileId

This is defined as igmpSnoopProfileId.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.202.20.66.1.9.20.1.1

igmpSnoopProfileRangeInetAddressType

The address type is associated with this agent.
Only ipv4(1) type is supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.202.20.66.1.9.20.1.2

igmpSnoopProfileRangeStartInetAddress

The specified addresses in the start of the controlled IP multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.202.20.66.1.9.20.1.3

igmpSnoopProfileRangeEndInetAddress

The specified addresses in the end of the controlled IP multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.202.20.66.1.9.20.1.4

igmpSnoopProfileRangeAction

The access mode of the IGMP snooping profile.

Enumeration

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.202.20.66.1.9.20.1.5

igmpSnoopFilterPortTable

table

.1.3.6.1.4.1.202.20.66.1.9.21 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in IGMP filtering.

igmpSnoopFilterPortEntry entry .1.3.6.1.4.1.202.20.66.1.9.21.1

Entry for port configuration in IGMP filtering.

Indexes

igmpSnoopFilterPortIndex

Column	Syntax	OID
igmpSnoopFilterPortIndex The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.202.20.66.1.9.21.1.1`
igmpSnoopFilterPortProfileId The igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. If there is no corresponding entry in the igmpSnoopProfileTab…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.202.20.66.1.9.21.1.2`

igmpSnoopThrottlePortTable

table

.1.3.6.1.4.1.202.20.66.1.9.22 · 1 row entry · 5 columns

Open in standard view

Table for port configuration in IGMP throttling.

igmpSnoopThrottlePortEntry entry .1.3.6.1.4.1.202.20.66.1.9.22.1

Entry for port configuration in IGMP throttling.

Indexes

igmpSnoopThrottlePortIndex

Column Syntax OID

igmpSnoopThrottlePortIndex

The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.202.20.66.1.9.22.1.1

igmpSnoopThrottlePortRunningStatus

Describes the running status of the IGMP throttling to the switch.
A value of true(1) indicates the IGMP throttling mechanism is active.
A value of false(2) indicates the IGMP throttling mechanism is inactive.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.202.20.66.1.9.22.1.2

igmpSnoopThrottlePortAction

The action mode of the IGMP throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to t…

Enumerationr/w

Enumerated Values:

1	replace
2	deny

.1.3.6.1.4.1.202.20.66.1.9.22.1.3

igmpSnoopThrottlePortMaxGroups

The maximum number of IGMP groups that the interface can join.

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.202.20.66.1.9.22.1.4

igmpSnoopThrottlePortCurrentGroups

The current number of IGMP groups that the interface has joined.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.9.22.1.5

netConfigTable

table

.1.3.6.1.4.1.202.20.66.1.10.1 · 1 row entry · 6 columns

Open in standard view

A table of netConfigEntry.

netConfigEntry entry .1.3.6.1.4.1.202.20.66.1.10.1.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

netConfigIfIndex netConfigIPAddress netConfigSubnetMask

Column Syntax OID

netConfigIfIndex

The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.10.1.1.1

netConfigIPAddress

The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.10.1.1.2

netConfigSubnetMask

The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure o…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.10.1.1.3

netConfigPrimaryInterface

Whether this is a primary interface.

Enumerationr/w

Enumerated Values:

1	primary
2	secondary

.1.3.6.1.4.1.202.20.66.1.10.1.1.4

netConfigUnnumbered

Whether this is an unnumbered interface.

Enumeration

Enumerated Values:

1	unnumbered
2	notUnnumbered

.1.3.6.1.4.1.202.20.66.1.10.1.1.5

netConfigStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.202.20.66.1.10.1.1.6

dhcpcInterfaceTable

table

.1.3.6.1.4.1.202.20.66.1.10.11.1.1.1 · 1 row entry · 3 columns

Open in standard view

Table for DHCP client information listed by interface.
Depending on the nature of the product, this table may
have only one entry(e.g. for the management VLAN), or
may have many entries(e.g. for all ports, or for all
static VLANs).

dhcpcInterfaceEntry entry .1.3.6.1.4.1.202.20.66.1.10.11.1.1.1.1

Entry for DHCP client information listed by interface.

Indexes

dhcpcIfIndex

Column Syntax OID

dhcpcIfIndex

This is defined by ifIndex in the IF-MIB.(static vlan if index)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.10.11.1.1.1.1.1

dhcpcIfClientIdMode

Whether the Client ID is in text mode or in Hex mode.

Enumerationr/w

Enumerated Values:

1	notSpecify
2	text
3	hex

.1.3.6.1.4.1.202.20.66.1.10.11.1.1.1.1.2

dhcpcIfClientId

The value that the DHCP client sets in the client_id
option of DHCPDISCOVER and DHCPREQUEST messages. This
value may be used by DHCP servers to uniquely identify
the client.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.202.20.66.1.10.11.1.1.1.1.3

bcastStormTable

table

.1.3.6.1.4.1.202.20.66.1.11.1 · 1 row entry · 3 columns

Open in standard view

Table to manage the control of broadcast storms for ports.

bcastStormEntry entry .1.3.6.1.4.1.202.20.66.1.11.1.1

The conceptual row of bcastStormTable.

Indexes

bcastStormIfIndex

Column Syntax OID

bcastStormIfIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.11.1.1.1

bcastStormStatus

Whether broadcast storm protection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.11.1.1.2

bcastStormOctetRateInKilo

Broadcast storm threshold in kilobits per second.
If this entry is for a trunk, this is the value
for each member port. For a 100 Mbps port, the
range is 64 to 100000. For a 1000 Mbps port, the
range is 64 to 1000000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.11.1.1.7

vlanTable

table

.1.3.6.1.4.1.202.20.66.1.12.1 · 1 row entry · 2 columns

Open in standard view

Table for VLAN configuration.

vlanEntry entry .1.3.6.1.4.1.202.20.66.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column Syntax OID

vlanIndex

Based on dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.202.20.66.1.12.1.1.1

vlanAddressMethod

Method to get the IP address.

Enumerationr/w

Enumerated Values:

1	user
2	bootp
3	dhcp

.1.3.6.1.4.1.202.20.66.1.12.1.1.2

vlanPortTable

table

.1.3.6.1.4.1.202.20.66.1.12.2 · 1 row entry · 3 columns

Open in standard view

Table for port configuration in VLAN.

vlanPortEntry entry .1.3.6.1.4.1.202.20.66.1.12.2.1

Entry for port configuration in VLAN.

Indexes

vlanPortIndex

Column Syntax OID

vlanPortIndex

The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of dot1qPvid in the Q-BRIDG…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.12.2.1.1

vlanPortMode

This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to access(3) sets an access link.

Enumerationr/w

Enumerated Values:

1	hybrid
2	dot1qTrunk
3	access

.1.3.6.1.4.1.202.20.66.1.12.2.1.2

vlanPortPrivateVlanType

The port type defined for private VLAN.

Enumerationr/w

Enumerated Values:

1	normal
2	isolated
3	community
4	promiscous

.1.3.6.1.4.1.202.20.66.1.12.2.1.3

protocolVlanTable

table

.1.3.6.1.4.1.202.20.66.1.12.5 · 1 row entry · 2 columns

Open in standard view

The configuration table which contains the binding entry 
of the protocol-group and VLANs.

protocolVlanEntry entry .1.3.6.1.4.1.202.20.66.1.12.5.1

The binding entry of the protocol-group and VLANs.

Indexes

protocolVlanGroupId

Column	Syntax	OID
protocolVlanGroupId The specified protocol group of a binding entry.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.202.20.66.1.12.5.1.1`
protocolVlanGroupVid The vlan index of the binding entry. The vid zero is used to delete the binding entry.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.202.20.66.1.12.5.1.2`

prioIpDscpTable

table

.1.3.6.1.4.1.202.20.66.1.13.4 · 1 row entry · 3 columns

Open in standard view

Table for IP DSCP priority mapping.

prioIpDscpEntry entry .1.3.6.1.4.1.202.20.66.1.13.4.1

Entry for IP DSCP priority mapping.

Indexes

prioIpDscpPort prioIpDscpValue

Column	Syntax	OID
prioIpDscpPort The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.202.20.66.1.13.4.1.1`
prioIpDscpValue Value of IP DSCP as specified in the packet header.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.202.20.66.1.13.4.1.2`
prioIpDscpCos Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (CoS). This CoS is then further mapped to the hardwar…	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.202.20.66.1.13.4.1.3`

prioWrrTable

table

.1.3.6.1.4.1.202.20.66.1.13.9 · 1 row entry · 2 columns

Open in standard view

Table for weighted round robin (WRR).

prioWrrEntry entry .1.3.6.1.4.1.202.20.66.1.13.9.1

Entry for weighted round robin (WRR).

Indexes

prioWrrTrafficClass

Column	Syntax	OID
prioWrrTrafficClass Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.202.20.66.1.13.9.1.1`
prioWrrWeight Weight for this entry.	Integer32r/w Constraints: `range: 1-255`	`.1.3.6.1.4.1.202.20.66.1.13.9.1.2`

trapDestTable

table

.1.3.6.1.4.1.202.20.66.1.14.1 · 1 row entry · 5 columns

Open in standard view

A list of trap destination entries.

trapDestEntry entry .1.3.6.1.4.1.202.20.66.1.14.1.1

A destination entry describes the destination IP address,
the community string, and SNMP version to use when sending
a trap.

Indexes

trapDestAddress

Column Syntax OID

trapDestAddress

The address to send traps.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.14.1.1.1

trapDestCommunity

A community to which this destination address belongs.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.202.20.66.1.14.1.1.2

trapDestStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.14.1.1.3

trapDestVersion

Determines the version of the trap that is to be sent to the
trap receiver. If the value is 1, then an SNMP version 1 trap
is sent and if the value is 2, an SNMP version 2 trap is
sent.

Enumerationr/w

Enumerated Values:

1	version1
2	version2

.1.3.6.1.4.1.202.20.66.1.14.1.1.4

trapDestUdpPort

Determines the UDP port number that the trap will be sent to.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.202.20.66.1.14.1.1.5

rateLimitPortTable

table

.1.3.6.1.4.1.202.20.66.1.16.1.2 · 1 row entry · 5 columns

Open in standard view

Table for rate limit of each port.

rateLimitPortEntry entry .1.3.6.1.4.1.202.20.66.1.16.1.2.1

Entry for rate limit of each port.

Indexes

rlPortIndex

Column Syntax OID

rlPortIndex

The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.1.2.1.1

rlPortInputStatus

Whether input rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.16.1.2.1.6

rlPortOutputStatus

Whether output rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.16.1.2.1.7

rlPortInputLimitInKilo

Value of the input rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.1.2.1.10

rlPortOutputLimitInKilo

Value of the output rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.1.2.1.11

diffServPortTable

table

.1.3.6.1.4.1.202.20.66.1.16.4.9 · 1 row entry · 4 columns

Open in standard view

Table for differentiated services on each port.

diffServPortEntry entry .1.3.6.1.4.1.202.20.66.1.16.4.9.1

Entry for differentiated services on each port.

Indexes

diffServPortIfIndex

Column	Syntax	OID
diffServPortIfIndex This object is the interface index of diffServPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.202.20.66.1.16.4.9.1.1`
diffServPortPolicyMapIndex Specifies the policy map binding to the interface. The policy map identified by a particular value of this index is associated with the same DiffServPolicyMapEntry as identified by the same value of diffServPolicyMapInd…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.202.20.66.1.16.4.9.1.2`
diffServPortIngressIpAclIndex Specifies the ingress IP ACL binding to the interface. The ingress IP ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.202.20.66.1.16.4.9.1.3`
diffServPortIngressMacAclIndex Specifies the ingress MAC ACL binding to the interface. The ingress MAC ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.202.20.66.1.16.4.9.1.4`

diffServPolicyMapTable

table

.1.3.6.1.4.1.202.20.66.1.16.4.10 · 1 row entry · 5 columns

Open in standard view

Table for policy map.

diffServPolicyMapEntry entry .1.3.6.1.4.1.202.20.66.1.16.4.10.1

Entry for policy map.

Indexes

diffServPolicyMapIndex

Column Syntax OID

diffServPolicyMapIndex

An index that uniquely identifies an entry in this table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.4.10.1.1

diffServPolicyMapName

The name of this entry.

OctetStringr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.202.20.66.1.16.4.10.1.2

diffServPolicyMapDescription

The description of this entry.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.202.20.66.1.16.4.10.1.3

diffServPolicyMapElementIndexList

The octet string containes the diffServPolicyMapElementEntry
indexes. Two octets express one index and it is represented
in network order. This index list indicates the
diffServPolicyMapEntrys which belong to this entry.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.202.20.66.1.16.4.10.1.4

diffServPolicyMapStatus

This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:

- 'active', which indi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.202.20.66.1.16.4.10.1.5

diffServPolicyMapElementTable

table

.1.3.6.1.4.1.202.20.66.1.16.4.12 · 1 row entry · 5 columns

Open in standard view

Table for policy map element.

diffServPolicyMapElementEntry entry .1.3.6.1.4.1.202.20.66.1.16.4.12.1

Entry for policy map element.

Indexes

diffServPolicyMapElementIndex

Column Syntax OID

diffServPolicyMapElementIndex

An index that uniquely identifies an entry in this table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.4.12.1.1

diffServPolicyMapElementClassMapIndex

Specifies the class map binding to this entry. The class map
identified by a particular value of this index is associated
with the same diffServClassMapEntry as identified by the same
value of diffServClassMapIndex.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.202.20.66.1.16.4.12.1.2

diffServPolicyMapElementMeterIndex

Specifies the meter binding to this entry. The meter
identified by a particular value of this index is associated
with the same diffServMeterEntry as identified by the same
value of diffServMeterIndex. If this value is …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.4.12.1.3

diffServPolicyMapElementActionIndex

Specifies the action binding to this entry. The action
identified by a particular value of this index is associated
with the same diffServActionEntry as identified by the same
value of diffServActionIndex.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.202.20.66.1.16.4.12.1.4

diffServPolicyMapElementStatus

This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:

The status column has six defined values:

- 'acti…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.202.20.66.1.16.4.12.1.5

diffServClassMapTable

table

.1.3.6.1.4.1.202.20.66.1.16.4.13 · 1 row entry · 7 columns

Open in standard view

Table for class map.

diffServClassMapEntry entry .1.3.6.1.4.1.202.20.66.1.16.4.13.1

Entry for class map.

Indexes

diffServClassMapIndex

Column Syntax OID

diffServClassMapIndex

An index that uniquely identifies an entry in this table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.4.13.1.1

diffServClassMapName

The name of this entry.

OctetStringr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.202.20.66.1.16.4.13.1.2

diffServClassMapDescription

The description of this entry.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.202.20.66.1.16.4.13.1.3

diffServClassMapMatchType

The map match type of this entry.

Enumerationr/w

Enumerated Values:

1	matchAny
2	matchAll

.1.3.6.1.4.1.202.20.66.1.16.4.13.1.4

diffServClassMapElementIndexTypeList

The octet string containes the type of class map element
indexes. Two octets which are represented in network order
express one type of the class map element index in network
order and it maps the index of
differServCla…

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.202.20.66.1.16.4.13.1.5

diffServClassMapElementIndexList

The octet string containes the class map element indexes. Two
octets express one index and it is represented in
network order. This index list indicates the particular
class map elements which belong to this table. The …

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.202.20.66.1.16.4.13.1.6

diffServClassMapStatus

This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:

The status column has six defined values:

- 'active'…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.202.20.66.1.16.4.13.1.7

diffServAclTable

table

.1.3.6.1.4.1.202.20.66.1.16.4.15 · 1 row entry · 5 columns

Open in standard view

Table for ACL.

diffServAclEntry entry .1.3.6.1.4.1.202.20.66.1.16.4.15.1

Entry for ACL.

Indexes

diffServAclIndex

Column Syntax OID

diffServAclIndex

An index that uniquely identifies an entry in the ACL
table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.4.15.1.1

diffServAclName

The name of this entry.

OctetStringr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.202.20.66.1.16.4.15.1.2

diffServAclType

The type of this entry. When the value of ACL type is
modified, then the ACEs in the diffServAclAceIndexList of
this entry will be auto-removed, and this entry will be aoto-
unbound from the diffServPortTable and the
di…

Enumerationr/w

Enumerated Values:

1	mac
2	ipstandard
3	ipextended

.1.3.6.1.4.1.202.20.66.1.16.4.15.1.3

diffServAclAceIndexList

The octet string containes the ACE indexes. Two octets
express one index and it is represented in network
order. This index list indicates the particular ACEs which
belong to this table. The ACE uses type to indicate th…

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.202.20.66.1.16.4.15.1.4

diffServAclStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

- 'active', which indicates that the conceptual row is
availa…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.202.20.66.1.16.4.15.1.5

diffServIpAceTable

table

.1.3.6.1.4.1.202.20.66.1.16.4.17 · 1 row entry · 20 columns

Open in standard view

Table for IP ACE.

diffServIpAceEntry entry .1.3.6.1.4.1.202.20.66.1.16.4.17.1

Entry for IP ACE.

Indexes

diffServIpAceIndex

Column Syntax OID

diffServIpAceIndex

An index that uniquely identifies an entry in the IP ACE
table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.1

diffServIpAceType

The specified IP ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0.

Enumerationr/w

Enumerated Values:

1	standard
2	extended

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.2

diffServIpAceAccess

Indicates the action to be taken if a packet matches this
ACE.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.3

diffServIpAceSourceIpAddr

The specified source IP address. The packet's source address
is AND-ed with the value of IpAceSourceIpAddrBitmask and then
compared against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.4

diffServIpAceSourceIpAddrBitmask

The specified source IP address mask. The packet's source
address is AND-ed with the value of IpAceSourceIpAddr and
then compared against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.5

diffServIpAceDestIpAddr

The specified destination IP address. The packet's
destination address is AND-ed with the value of
diffServIpAceDestIpAddrBitmask and then compared against the
value of this object. This object may not be modified if th…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.6

diffServIpAceDestIpAddrBitmask

The specified destination IP address mask. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1).

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.7

diffServIpAceProtocol

The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
of 0 matches every IP packet. The object=256 means 'any'. For
example: 0 is IP, 1 is ICMP, 2 is IGM…

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.8

diffServIpAcePrec

Specifies the IP precedence value to match against. The value
of this object is ignored whenever the value of
diffServIpAcePrec object is 8. This object may not be modified
if the associated diffServIpAceType object is …

Integer32r/w

Constraints:
range: 0-8

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.9

diffServIpAceTos

Specifies the IP ToS facility value to match against. The
value of this object is ignored whenever the value of
diffServIpAcePrec object is 9. This object may not be modified
if the associated diffServIpAceType object i…

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.10

diffServIpAceDscp

Specifies the DSCP value to match against. The value of this
object is ignored whenever the value of diffServIpAcePrec
object is 64. This object may not be modified if the
associated diffServIpAceType object is equal to…

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.11

diffServIpAceSourcePortOp

Indicates how a packet's source TCP/UDP port number is to be
compared. noOperator(1), which is the default value, means no
comparison is to be made with the source TCP/UDP port
number. equal(2), which is used the
diffSe…

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.12

diffServIpAceMinSourcePort

If the diffServIpAceSourcePortOp is range(3), this
indicates the lower bound of the TCP/UDP port number
value range. This object may not be modified if the
associated diffServIpAceType object is equal to
standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.13

diffServIpAceSourcePortBitmask

If the diffServIpAceSourcePortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinSourcePort. This object may
not be modified if the associated diffServIpAceType object is
equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.15

diffServIpAceDestPortOp

Indicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the destination
TCP/UDP port number. equal(2), which is …

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.16

diffServIpAceMinDestPort

If the diffServIpAceDestPortOp is range(3), this indicates
the lower bound of the TCP/UDP port number value range. This
object may not be modified if the associated
diffServIpAceType object is equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.17

diffServIpAceDestPortBitmask

If the diffServIpAceDestPortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinDestPort. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.19

diffServIpAceControlCode

Indicates how the control flags of TCP packets are to be
compared. diffServIpAceControlCode is AND-ed with
diffServIpAceControlCodeBitmask. This object may not be
modified if the associated diffServIpAceType object is
e…

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.20

diffServIpAceControlCodeBitmask

Indicates how the control flags of TCP packets are to be
compared. It can be used to check multiple flags of the FIN,
SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4,
PSH=8, ACK=16, URG=32. This object may not…

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.21

diffServIpAceStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.202.20.66.1.16.4.17.1.22

diffServMacAceTable

table

.1.3.6.1.4.1.202.20.66.1.16.4.18 · 1 row entry · 14 columns

Open in standard view

Table for MAC ACE.

diffServMacAceEntry entry .1.3.6.1.4.1.202.20.66.1.16.4.18.1

Entry for MAC ACE.

Indexes

diffServMacAceIndex

Column Syntax OID

diffServMacAceIndex

An index that uniquely identifies an entry in the MAC ACE
table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.1

diffServMacAceAccess

Indicates the action to be taken if a packet matches this
ACE.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.2

diffServMacAcePktformat

Used to check the packet format of the packets. This object
cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	any
2	untagged-Eth2
3	untagged802Dot3
4	tagggedEth2
5	tagged802Dot3

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.3

diffServMacAceSourceMacAddr

Indicates the 48-bit source MAC address. The specified source
MAC of the packet. The packet's source MAC address is AND-ed
with the value of diffServMacAceSourceMacAddrBitmask
and then compared against the value of this…

r/w

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.4

diffServMacAceSourceMacAddrBitmask

The specified source MAC address mask.

r/w

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.5

diffServMacAceDestMacAddr

Indicates the 48-bit destination MAC address. The specified
destination MAC of the packet. The packet's destination MAC
address is AND-ed with the value of
diffServMacAceDestMacAddrBitmask and then compared against
the …

r/w

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.6

diffServMacAceDestMacAddrBitmask

The specified destination MAC address mask.

r/w

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.7

diffServMacAceVidOp

Indicates how a packet's VID is to be compared. This
object cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.8

diffServMacAceMinVid

Indicates the lower bound of the VID value range if the
diffServMacAceVidOp is range(3).

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.9

diffServMacAceVidBitmask

The bitmask of the VID if the diffServMacAceVidOp is
equal(2). Default value is 0xfff.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.10

diffServMacAceEtherTypeOp

Indicates how a packet's ether type is to be compared.

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.12

diffServMacAceEtherTypeBitmask

The bitmask of ether type if the diffServMacAceEtherTypeOp is
equal(2). The default value is 'FFFF'h.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.13

diffServMacAceMinEtherType

Indicates the lower bound of the ether type value range
if the diffServMacAceEtherTypeOp is range(3).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.14

diffServMacAceStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.202.20.66.1.16.4.18.1.16

diffServActionTable

table

.1.3.6.1.4.1.202.20.66.1.16.4.19 · 1 row entry · 7 columns

Open in standard view

Table for action.

diffServActionEntry entry .1.3.6.1.4.1.202.20.66.1.16.4.19.1

Entry for action.

Indexes

diffServActionIndex

Column Syntax OID

diffServActionIndex

An index that uniquely identifies an entry in the
action table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.4.19.1.1

diffServActionList

The bitmap value used to identify which action
capabilities are enabled on the entry. The
actionPktNewPri and actionPktNewDscp can not be
enabled at the same time on the entry. The
actionRedPktNewDscp and actionRedDro…

Bitsr/w

Enumerated Values:

0	actionPktNewPri
2	actionPktNewDscp
3	actionRedPktNewDscp
4	actionRedDrop

.1.3.6.1.4.1.202.20.66.1.16.4.19.1.2

diffServActionPktNewPri

Specifies the new priority value for the packet when
the action is satisfied. If the actionPktNewPri bit of
the diffServActionList is not enabled, this object can
not be set.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.202.20.66.1.16.4.19.1.3

diffServActionPktNewDscp

Specifies the new DSCP value for the packet when
the action is satisfied. If the actionPktNewDscp bit of
the diffServActionList is not enabled, this object
can not be set.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.202.20.66.1.16.4.19.1.5

diffServActionRedPktNewDscp

Specifies the new DSCP value for the red
marking packet when the action is satisfied. If the
actionRedPktNewDscp bit of the diffServActionList is
not enabled, this object can not be set.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.202.20.66.1.16.4.19.1.6

diffServActionRedDrop

The actionRedDrop bit of the
diffServActionList is for configuring this
object. If the value of this object is enabled, the
red marking packet will be dropped.

P-BRIDGE-MIBEnabledStatus

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.16.4.19.1.7

diffServActionStatus

This object is used to create a new row, modify or
delete an existing row in this table.
The status column has six defined values:

The status column has six defined values:

- 'active', whi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.202.20.66.1.16.4.19.1.8

diffServMeterTable

table

.1.3.6.1.4.1.202.20.66.1.16.4.20 · 1 row entry · 6 columns

Open in standard view

Table for meter.

diffServMeterEntry entry .1.3.6.1.4.1.202.20.66.1.16.4.20.1

Entry for meter.

Indexes

diffServActionIndex

Column Syntax OID

diffServMeterIndex

An entry that describes a single set of token bucket
parameters.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.4.20.1.1

diffServMeterModel

The Metering algorithm associated with the Token Bucket
parameters. The zeroDotZero indicates this is unknown.

Enumerationr/w

Enumerated Values:

1	default
2	flow
3	trTcmColorBlind
4	trTcmColorAware
5	srTcmColorBlind
6	srTcmColorAware

.1.3.6.1.4.1.202.20.66.1.16.4.20.1.2

diffServMeterRate

The token-bucket rate, in kilobits per second (kbps).

Integer32r/w

Constraints:
range: 1-1000000

.1.3.6.1.4.1.202.20.66.1.16.4.20.1.3

diffServMeterBurstSize

The maximum number of bytes in a single transmission burst.

Integer32r/w

Constraints:
range: 64-524288

.1.3.6.1.4.1.202.20.66.1.16.4.20.1.4

diffServMeterInterval

The time interval used with the token bucket.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.16.4.20.1.5

diffServMeterStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.202.20.66.1.16.4.20.1.6

privateVlanVlanTable

table

.1.3.6.1.4.1.202.20.66.1.17.1.4 · 1 row entry · 3 columns

Open in standard view

A table containing private VLAN information on the
VLANs which currently exist.

privateVlanVlanEntry entry .1.3.6.1.4.1.202.20.66.1.17.1.4.1

A conceptual row containing the private VLAN
information on the VLANs for a particular management
domain.

Indexes

privateVlanVlanIndex

Column Syntax OID

privateVlanVlanIndex

The VLAN ID of this private VLAN.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.202.20.66.1.17.1.4.1.1

privateVlanVlanType

The VLAN type as defined for Private VLAN feature.
Set the value to invalid(1) to destroy an entry. Set
other values to create an entry. If an index
already exists, set others to modifiy it. Note that a VLAN's
private V…

Enumerationr/w

Enumerated Values:

1	invalid
2	primary
3	isolated
4	community

.1.3.6.1.4.1.202.20.66.1.17.1.4.1.2

privateVlanAssoicatedPrimaryVlan

The VLAN ID of the associated primary VLAN used for
the private VLAN feature if privateVlanVlanType has the
value of isolated(3), community(4). If privateVlanVlanType
has the value of primary(2), then this object has th…

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.202.20.66.1.17.1.4.1.3

privateVlanPrivatePortTable

table

.1.3.6.1.4.1.202.20.66.1.17.1.5 · 1 row entry · 2 columns

Open in standard view

A table containing information on the configuration of
secondary VLANs on the device ports.

privateVlanPrivatePortEntry entry .1.3.6.1.4.1.202.20.66.1.17.1.5.1

A conceptual row containing information of the
configuration of secondary VLANs for each port. An entry
is created by the managed system for each interface which
can be configured as a private port for Private VLAN
feat…

Indexes

privateVlanPrivatePortIfIndex

Column	Syntax	OID
privateVlanPrivatePortIfIndex This is defined as the ifIndex.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.202.20.66.1.17.1.5.1.1`
privateVlanPrivatePortSecondaryVlan The VLAN ID of the secondary VLAN configured on this private port. A private port is a port that allows ingress traffic of the secondary VLAN as well as egress traffic of its associated primary VLAN, but blocks the egre…	Integer32r/w Constraints: `range: 0-4094`	`.1.3.6.1.4.1.202.20.66.1.17.1.5.1.2`

privateVlanPromPortTable

table

.1.3.6.1.4.1.202.20.66.1.17.1.6 · 1 row entry · 6 columns

Open in standard view

A table containing secondary VLAN to primary VLAN remapping
information on ports of the device.

privateVlanPromPortEntry entry .1.3.6.1.4.1.202.20.66.1.17.1.6.1

A conceptual row containing secondary VLAN to primary
VLAN remapping information for each port.
An entry is created by the managed system for each interface
which can be configured as a promiscuous port for the
privat…

Indexes

privateVlanPromPortIfIndex

Column	Syntax	OID
privateVlanPromPortIfIndex This is defined as ifIndex.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.202.20.66.1.17.1.6.1.1`
privateVlanPromPortPrimaryVlanId The primary VLAN ID of the promiscous port.	Integer32r/w Constraints: `range: 0-4094`	`.1.3.6.1.4.1.202.20.66.1.17.1.6.1.2`
privateVlanPromPortSecondaryRemap A string of octets containing one bit per VLAN in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 0 through 7; the second octet to VLANs 8 through 15; etc. The mos…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.202.20.66.1.17.1.6.1.3`
privateVlanPromPortSecondaryRemap2k A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 1024 through 2047 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 1024 t…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.202.20.66.1.17.1.6.1.4`
privateVlanPromPortSecondaryRemap3k A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 2048 through 3071 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 2048 t…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.202.20.66.1.17.1.6.1.5`
privateVlanPromPortSecondaryRemap4k A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 3072 through 4095 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 3072 t…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.202.20.66.1.17.1.6.1.6`

portSecPortTable

table

.1.3.6.1.4.1.202.20.66.1.17.2.1 · 1 row entry · 4 columns

Open in standard view

The port security(MAC binding) Table.

portSecPortEntry entry .1.3.6.1.4.1.202.20.66.1.17.2.1.1

The entry of portSecPortTable.

Indexes

portSecPortIndex

Column Syntax OID

portSecPortIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.17.2.1.1.1

portSecPortStatus

Set enabled(1) to enable port security and set disabled(2) to
disable port security.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.17.2.1.1.2

portSecAction

The corresponding actions that will take place when a
port is under intrusion, when this variable is set to
none(1), no action will be performed, when this variable is
set to trap(2), a swPortSecurityTrap trap will be s…

Enumerationr/w

Enumerated Values:

1	none
2	trap
3	shutdown
4	trapAndShutdown

.1.3.6.1.4.1.202.20.66.1.17.2.1.1.3

portSecMaxMacCount

The maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the num…

Integer32r/w

Constraints:
range: 0-1024

.1.3.6.1.4.1.202.20.66.1.17.2.1.1.4

radiusMultipleServerTable

table

.1.3.6.1.4.1.202.20.66.1.17.4.7 · 1 row entry · 7 columns

Open in standard view

The table for multiple RADIUS server.

radiusMultipleServerEntry entry .1.3.6.1.4.1.202.20.66.1.17.4.7.1

The conceptual row for radiusMultipleServerTable.

Indexes

radiusMultipleServerIndex

Column Syntax OID

radiusMultipleServerIndex

The RADIUS multiple server index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.17.4.7.1.1

radiusMultipleServerAddress

IP address of a multiple RADIUS server.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.17.4.7.1.2

radiusMultipleServerPortNumber

IP port number of a multiple RADIUS server.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.202.20.66.1.17.4.7.1.3

radiusMultipleServerKey

Key for RADIUS. This variable can only be set.
When this variable is read, it always returns a
zero-length string.

OctetStringr/w

Constraints:
range: 0-48

.1.3.6.1.4.1.202.20.66.1.17.4.7.1.4

radiusMultipleServerRetransmit

Maximum number of retransmissions for RADIUS.

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.202.20.66.1.17.4.7.1.5

radiusMultipleServerTimeout

Timeout for RADIUS.

secondsInteger32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.202.20.66.1.17.4.7.1.6

radiusMultipleServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.17.4.7.1.8

sshConnInfoTable

table

.1.3.6.1.4.1.202.20.66.1.17.6.6 · 1 row entry · 7 columns

Open in standard view

The table for Secure Shell Connection.

sshConnInfoEntry entry .1.3.6.1.4.1.202.20.66.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column Syntax OID

sshConnID

The connection ID of the Secure Shell Connection.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.17.6.6.1.1

sshConnMajorVersion

The SSH major version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.17.6.6.1.2

sshConnMinorVersion

The SSH minor version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.17.6.6.1.3

sshConnStatus

The SSH connection State. negotiationStart(1) means the
SSH is in its negotiation start state, authenticationStart(2)
means the SSH is in authentication start state, sessionStart(3)
means the SSH is in session start Sta…

Enumeration

Enumerated Values:

1	negotiationStart
2	authenticationStart
3	sessionStart

.1.3.6.1.4.1.202.20.66.1.17.6.6.1.5

sshConnUserName

The user name of the connection.

OctetString

Constraints:
range: 1-8

.1.3.6.1.4.1.202.20.66.1.17.6.6.1.6

sshDisconnect

Set the variable to disconnect the connection,
noDisconnect(1) will always be obtained when reading this variable.

Enumerationr/w

Enumerated Values:

1	noDisconnect
2	disconnect

.1.3.6.1.4.1.202.20.66.1.17.6.6.1.7

sshConnEncryptionTypeStr

The encryption type of the SSH.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.202.20.66.1.17.6.6.1.8

sshUserTable

table

.1.3.6.1.4.1.202.20.66.1.17.6.29 · 1 row entry · 18 columns

Open in standard view

The conceptual table of all of sshUserEntry.

sshUserEntry entry .1.3.6.1.4.1.202.20.66.1.17.6.29.1

The conceptual row for sshUserTable.

Indexes

sshUserName

Column Syntax OID

sshUserName

User Name.

OctetString

Constraints:
range: 1-8

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.1

sshUserRsaKey1

The RSA user key segment 1.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.2

sshUserRsaKey2

The RSA user key segment 2.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.3

sshUserRsaKey3

The RSA user key segment 3.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.4

sshUserRsaKey4

The RSA user key segment 4.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.5

sshUserRsaKey5

The RSA user key segment 5.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.6

sshUserRsaKey6

The RSA user key segment 6.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.7

sshUserRsaKey7

The RSA user key segment 7.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.8

sshUserRsaKey8

The RSA user key segment 8.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.9

sshUserDsaKey1

The DSA user key segment 1.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.10

sshUserDsaKey2

The DSA user key segment 2.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.11

sshUserDsaKey3

The DSA user key segment 3.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.12

sshUserDsaKey4

The DSA user key segment 4.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.13

sshUserDsaKey5

The DSA user key segment 5.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.14

sshUserDsaKey6

The DSA user key segment 6.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.15

sshUserDsaKey7

The DSA user key segment 7.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.16

sshUserDsaKey8

The DSA user key segment 8.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.17

sshUserKeyDelAction

To delete the user key.

For the set behavior:
Set it to delRsaKey(2) to delete the RSA user key,
to delDsaKey(3) to delete the DSA user key,
or to delBothKeys(4) to delete both RSA and DSA user key.
…

Enumerationr/w

Enumerated Values:

1	noDel
2	delRsaKey
3	delDsaKey
4	delBothKeys

.1.3.6.1.4.1.202.20.66.1.17.6.29.1.18

ipFilterSnmpTable

table

.1.3.6.1.4.1.202.20.66.1.17.9.1 · 1 row entry · 3 columns

Open in standard view

A list of IP address entries.

ipFilterSnmpEntry entry .1.3.6.1.4.1.202.20.66.1.17.9.1.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

ipFilterSnmpStartAddress

Column Syntax OID

ipFilterSnmpStartAddress

The start IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.17.9.1.1.1

ipFilterSnmpEndAddress

The end IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.17.9.1.1.2

ipFilterSnmpStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.17.9.1.1.3

ipFilterHTTPTable

table

.1.3.6.1.4.1.202.20.66.1.17.9.2 · 1 row entry · 3 columns

Open in standard view

A list of IP address entries.

ipFilterHTTPEntry entry .1.3.6.1.4.1.202.20.66.1.17.9.2.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

ipFilterHTTPStartAddress

Column Syntax OID

ipFilterHTTPStartAddress

The start IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.17.9.2.1.1

ipFilterHTTPEndAddress

The end IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.17.9.2.1.2

ipFilterHTTPStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.17.9.2.1.3

ipFilterTelnetTable

table

.1.3.6.1.4.1.202.20.66.1.17.9.3 · 1 row entry · 3 columns

Open in standard view

A list of IP address entries.

ipFilterTelnetEntry entry .1.3.6.1.4.1.202.20.66.1.17.9.3.1

This entry includes an IP address range which the system
will allow them to connect to this device through SNMP.

Indexes

ipFilterTelnetStartAddress

Column Syntax OID

ipFilterTelnetStartAddress

The start IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.17.9.3.1.1

ipFilterTelnetEndAddress

The end IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.17.9.3.1.2

ipFilterTelnetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.17.9.3.1.3

remoteLogServerTable

table

.1.3.6.1.4.1.202.20.66.1.19.6.4 · 1 row entry · 2 columns

Open in standard view

A Table for storing the remote log Server list.

remoteLogServerEntry entry .1.3.6.1.4.1.202.20.66.1.19.6.4.1

A conceptually row for remoteLogServerTable.

Indexes

remoteLogServerIp

Column Syntax OID

remoteLogServerIp

The IP address of the remote log Server.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.19.6.4.1.1

remoteLogServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.19.6.4.1.2

smtpServerIpTable

table

.1.3.6.1.4.1.202.20.66.1.19.7.4 · 1 row entry · 2 columns

Open in standard view

The SMTP server IP table.
The maximum servers to be added is 3.

smtpServerIpEntry entry .1.3.6.1.4.1.202.20.66.1.19.7.4.1

A conceptual row of the smtpServerIpTable.

Indexes

smtpServerIp

Column Syntax OID

smtpServerIp

SMTP mail server's IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.19.7.4.1.1

smtpServerIpStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.19.7.4.1.2

smtpDestEMailTable

table

.1.3.6.1.4.1.202.20.66.1.19.7.5 · 1 row entry · 2 columns

Open in standard view

The table of the destination e-mail address.
The maximum numbers of destination email address to be added is 5.

smtpDestEMailEntry entry .1.3.6.1.4.1.202.20.66.1.19.7.5.1

A conceptual row of the smtpDestEMailTable.

Indexes

smtpDestEMail

Column Syntax OID

smtpDestEMail

SMTP destination e-mail address.

OctetString

Constraints:
range: 0-41

.1.3.6.1.4.1.202.20.66.1.19.7.5.1.1

smtpDestEMailStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.19.7.5.1.2

sntpServerTable

table

.1.3.6.1.4.1.202.20.66.1.23.1.4 · 1 row entry · 2 columns

Open in standard view

Table for SNTP servers

sntpServerEntry entry .1.3.6.1.4.1.202.20.66.1.23.1.4.1

Entry for SNTP servers.

Indexes

sntpServerIndex

Column	Syntax	OID
sntpServerIndex The index of a server. This table has fixed size.	Integer32 Constraints: `range: 1-3`	`.1.3.6.1.4.1.202.20.66.1.23.1.4.1.1`
sntpServerIpAddress The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index are 0.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.202.20.66.1.23.1.4.1.2`

fileInfoTable

table

.1.3.6.1.4.1.202.20.66.1.24.2.1 · 1 row entry · 7 columns

Open in standard view

This table contain the information of the file system;
we can also perform the delete, set startup file operation.

fileInfoEntry entry .1.3.6.1.4.1.202.20.66.1.24.2.1.1

A conceptually row for fileInfoTable.

Indexes

fileInfoUnitID fileInfoFileName

Column Syntax OID

fileInfoUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.24.2.1.1.1

fileInfoFileName

The file Name of the file System in the device.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.202.20.66.1.24.2.1.1.2

fileInfoFileType

The file type of the file System in the device.

Enumeration

Enumerated Values:

1	diag
2	runtime
3	syslog
4	cmdlog
5	config
6	postlog
7	private
8	certificate
9	webarchive

.1.3.6.1.4.1.202.20.66.1.24.2.1.1.3

fileInfoIsStartUp

This flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.202.20.66.1.24.2.1.1.4

fileInfoFileSize

The sizes( in bytes) of the file.

bytesSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.24.2.1.1.5

fileInfoCreationTime

The creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A single-d…

OctetString

Constraints:
range: 20-20

.1.3.6.1.4.1.202.20.66.1.24.2.1.1.6

fileInfoDelete

Write this object to delete(2) to delete a file, when
read, this always return noDelete(1).

Enumerationr/w

Enumerated Values:

1	noDelete
2	delete

.1.3.6.1.4.1.202.20.66.1.24.2.1.1.7

fileAutoDownloadResultTable

table

.1.3.6.1.4.1.202.20.66.1.24.3 · 1 row entry · 3 columns

Open in standard view

This table contains file auto download result information.

fileAutoDownloadResultEntry entry .1.3.6.1.4.1.202.20.66.1.24.3.1

A conceptual row for fileAutoDownloadResultTable.

Indexes

fileAutoDownloadResultUnitID

Column Syntax OID

fileAutoDownloadResultUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.202.20.66.1.24.3.1.1

fileAutoDownloadResultAction

The status of the auto download action.
value copying(2) will be obtained if the auto download action is currently processing,
or value notCopying(1) will be obtained if no auto download action is currently processing.
…

Enumeration

Enumerated Values:

1	notCopying
2	copying

.1.3.6.1.4.1.202.20.66.1.24.3.1.2

fileAutoDownloadResultStatus

The last auto download result status.
value fileCopyUnknown(18) will be obtained
if no download action has been performed before.

FileCopyStatus

Textual Convention: FileCopyStatus Enumeration

Type Values:

1	fileCopyTftpUndefError
2	fileCopyTftpFileNotFound
3	fileCopyTftpAccessViolation
4	fileCopyTftpDiskFull
5	fileCopyTftpIllegalOperation
6	fileCopyTftpUnkownTransferId
7	fileCopyTftpFileExisted
8	fileCopyTftpNoSuchUser
9	fileCopyTftpTimeout
10	fileCopyTftpSendError
11	fileCopyTftpReceiverError
12	fileCopyTftpSocketOpenError
13	fileCopyTftpSocketBindError
14	fileCopyTftpUserCancel
15	fileCopyTftpCompleted
16	fileCopyParaError
17	fileCopyBusy
18	fileCopyUnknown
19	fileCopyReadFileError
20	fileCopySetStartupError
21	fileCopyFileSizeExceed
22	fileCopyMagicWordError
23	fileCopyImageTypeError
24	fileCopyHeaderChecksumError
25	fileCopyImageChecksumError
26	fileCopyWriteFlashFinish
27	fileCopyWriteFlashError
28	fileCopyWriteFlashProgramming
29	fileCopyError
30	fileCopySuccess
31	fileCopyCompleted

.1.3.6.1.4.1.202.20.66.1.24.3.1.3

mvrGroupTable

table

.1.3.6.1.4.1.202.20.66.1.44.6 · 1 row entry · 3 columns

Open in standard view

The table for configuring the MVR group.

mvrGroupEntry entry .1.3.6.1.4.1.202.20.66.1.44.6.1

The entry for configuring the MVR group.

Indexes

mvrGroupId

Column Syntax OID

mvrGroupId

The multicast address of the MVR group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.44.6.1.1

mvrGroutActive

To indicate if the group has a member or not. If there are no
members, the status is inactive(2); otherwise the status
is active(1).

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.202.20.66.1.44.6.1.2

mvrGroupStatus

Setting this to valid(1) creates an entry. Setting this
to invalid(2) destroys an entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.44.6.1.3

mvrGroupStaticTable

table

.1.3.6.1.4.1.202.20.66.1.44.7 · 1 row entry · 3 columns

Open in standard view

The table for configuring the static members of the
MVR group.

mvrGroupStaticEntry entry .1.3.6.1.4.1.202.20.66.1.44.7.1

The entry for configuring the static members of the
MVR group.

Indexes

mvrGroupStaticAddress

Column Syntax OID

mvrGroupStaticAddress

The multicast address of the MVR group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.44.7.1.1

mvrGroupStaticPorts

The set of ports configured by management in this entry.
Ports entered in this list will be the static members
of this MVR group.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.202.20.66.1.44.7.1.2

mvrGroupStaticStatus

Setting this to valid(1) creates an entry. Setting this
to invalid(2) destroys an entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.202.20.66.1.44.7.1.3

mvrGroupCurrentTable

table

.1.3.6.1.4.1.202.20.66.1.44.8 · 1 row entry · 2 columns

Open in standard view

The table for the current members of the MVR group.

mvrGroupCurrentEntry entry .1.3.6.1.4.1.202.20.66.1.44.8.1

The entry for the current members of the MVR group.

Indexes

mvrGroupCurrentAddress

Column	Syntax	OID
mvrGroupCurrentAddress The multicast address of the MVR group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.202.20.66.1.44.8.1.1`
mvrGroupCurrentPorts The complete set of ports currently associated with this MVR group.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.202.20.66.1.44.8.1.2`

mvrPortTable

table

.1.3.6.1.4.1.202.20.66.1.44.9 · 1 row entry · 4 columns

Open in standard view

The table for configuring the MVR port.

mvrPortEntry entry .1.3.6.1.4.1.202.20.66.1.44.9.1

The entry for configuring the MVR port.

Indexes

mvrIfIndex

Column Syntax OID

mvrIfIndex

The port interface of the portTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of ifIndex
in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.202.20.66.1.44.9.1.1

mvrPortType

For configuring the MVR port type. To disable the MVR
port type, use the none(0).

Enumerationr/w

Enumerated Values:

0	none
1	source
2	receiver

.1.3.6.1.4.1.202.20.66.1.44.9.1.2

mvrPortImmediateLeave

To enable immediate leave on MVR port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.44.9.1.3

mvrPortActive

To indicate if the port is associated with the MVR group.
If the port is the MVR receiver port or the MVR source
port in MVR vlan, the status is active(1); otherwise
the status is inactive(2).

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.202.20.66.1.44.9.1.4

dhcpSnoopVlanConfigTable

table

.1.3.6.1.4.1.202.20.66.1.46.2.1 · 1 row entry · 2 columns

Open in standard view

A table contains DHCP Snooping configurations of existing VLANs.

dhcpSnoopVlanConfigEntry entry .1.3.6.1.4.1.202.20.66.1.46.2.1.1

An instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN.

Indexes

dhcpSnoopVlanIndex

Column Syntax OID

dhcpSnoopVlanIndex

This object indicates the VLAN ID on which DHCP Snooping
feature is configured.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.202.20.66.1.46.2.1.1.1

dhcpSnoopVlanEnable

This object indicates whether DHCP Snooping is enabled in
this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.46.2.1.1.2

dhcpSnoopPortConfigTable

table

.1.3.6.1.4.1.202.20.66.1.46.3.1 · 1 row entry · 2 columns

Open in standard view

A table provides the mechanism to configure the trust
state of each port or trunk for DHCP Snooping purpose.

dhcpSnoopPortConfigEntry entry .1.3.6.1.4.1.202.20.66.1.46.3.1.1

An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCP Snooping purpose.

Indexes

dhcpSnoopPortIfIndex

Column Syntax OID

dhcpSnoopPortIfIndex

The ifIndex value of the port or trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.202.20.66.1.46.3.1.1.1

dhcpSnoopPortTrustEnable

This object indicates whether the port or trunk is trusted
for DHCP Snooping purpose.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.202.20.66.1.46.3.1.1.2

dhcpSnoopBindingsTable

table

.1.3.6.1.4.1.202.20.66.1.46.4.1 · 1 row entry · 7 columns

Open in standard view

A table contains the DHCP bindings information learnt by
the device.

dhcpSnoopBindingsEntry entry .1.3.6.1.4.1.202.20.66.1.46.4.1.1

An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status.

Indexes

dhcpSnoopBindingsVlanIndex dhcpSnoopBindingsMacAddress

Column Syntax OID

dhcpSnoopBindingsVlanIndex

This object indicates the VLAN which a DHCP client host
belongs to.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.202.20.66.1.46.4.1.1.1

dhcpSnoopBindingsMacAddress

This object indicates the MAC address of a DHCP client
host.

.1.3.6.1.4.1.202.20.66.1.46.4.1.1.2

dhcpSnoopBindingsAddrType

This object indicates the type of IP address denoted in
dhcpSnoopBindingsIpAddress type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.202.20.66.1.46.4.1.1.3

dhcpSnoopBindingsEntryType

This object indicates that this binding is obtained from
dynamically learning or is a static configuraion.

Enumeration

Enumerated Values:

1	dynamic
2	static

.1.3.6.1.4.1.202.20.66.1.46.4.1.1.4

dhcpSnoopBindingsIpAddress

This object indicates the allocated IP address of
a DHCP client host.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.46.4.1.1.5

dhcpSnoopBindingsPortIfIndex

This object indicates the port or trunk where a DHCP client
host connects to.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.202.20.66.1.46.4.1.1.6

dhcpSnoopBindingsLeaseTime

This object indicates the leased time of this DHCP
bindings.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.202.20.66.1.46.4.1.1.7

clusterCandidateTable

table

.1.3.6.1.4.1.202.20.66.1.47.9 · 1 row entry · 3 columns

Open in standard view

A table listing cluster candidates.

clusterCandidateEntry entry .1.3.6.1.4.1.202.20.66.1.47.9.1

A conceptual row containing the information of the candidate.

Indexes

clusterCandidateMacAddr

Column Syntax OID

clusterCandidateMacAddr

The MAC address of the candidate.

.1.3.6.1.4.1.202.20.66.1.47.9.1.1

clusterCandidateDesc

The description of the candidate.

OctetString

Constraints:
range: 0-42

.1.3.6.1.4.1.202.20.66.1.47.9.1.3

clusterCandidateRole

The role of the candidate.
candidate(2) : The switch is discovered by the commander,
but it has not been manually configured for
access from the commander.
activeMember(3) : Th…

Enumeration

Enumerated Values:

2	candidate
3	activeMember
4	inactiveMember

.1.3.6.1.4.1.202.20.66.1.47.9.1.4

clusterMemberTable

table

.1.3.6.1.4.1.202.20.66.1.47.10 · 1 row entry · 4 columns

Open in standard view

A table listing clustering members.

clusterMemberEntry entry .1.3.6.1.4.1.202.20.66.1.47.10.1

A conceptual row containing the information of the member.

Indexes

clusterMemberId

Column Syntax OID

clusterMemberId

The ID of the member.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.202.20.66.1.47.10.1.1

clusterMemberMacAddr

The MAC address of the member.

.1.3.6.1.4.1.202.20.66.1.47.10.1.2

clusterMemberDesc

The description of the member.

OctetString

Constraints:
range: 0-42

.1.3.6.1.4.1.202.20.66.1.47.10.1.3

clusterMemberActive

The active status of the member.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is…

Enumeration

Enumerated Values:

3	activeMember
4	inactiveMember

.1.3.6.1.4.1.202.20.66.1.47.10.1.4

ipSrcGuardConfigTable

table

.1.3.6.1.4.1.202.20.66.1.48.1 · 1 row entry · 2 columns

Open in standard view

A table contains the configurations to enable or disable
IP Source Guard at each port or trunk.

ipSrcGuardConfigEntry entry .1.3.6.1.4.1.202.20.66.1.48.1.1

An instance contains the configuration to enable
or disable IP Source Guard at each port or trunk.

Indexes

ipSrcGuardPortIfIndex

Column Syntax OID

ipSrcGuardPortIfIndex

This object idents the port or trunk which is capable of
IP Source Guard feature.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.202.20.66.1.48.1.1.1

ipSrcGuardMode

This object indicates whether Ip Source Guard is enabled
at this interface. If the value equals 0, it means Ip Source
Guard is disabled. If the value equals 1, it means Ip Source
Guard is enabled, and packets are filte…

Enumerationr/w

Enumerated Values:

0	diabled
1	srcIp
2	srcIpMac

.1.3.6.1.4.1.202.20.66.1.48.1.1.2

ipSrcGuardAddrTable

table

.1.3.6.1.4.1.202.20.66.1.48.2 · 1 row entry · 8 columns

Open in standard view

A table contains the IP Source Guard bindings information
learnt by the device.

ipSrcGuardAddrEntry entry .1.3.6.1.4.1.202.20.66.1.48.2.1

An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status.

Indexes

ipSrcGuardBindingsVlanIndex ipSrcGuardBindingsMacAddress

Column Syntax OID

ipSrcGuardBindingsVlanIndex

This object indicates the VLAN which a DHCP client host
belongs to.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.202.20.66.1.48.2.1.1

ipSrcGuardBindingsMacAddress

This object indicates the MAC address of a DHCP client
host.

.1.3.6.1.4.1.202.20.66.1.48.2.1.2

ipSrcGuardBindingsAddrType

This object indicates the type of IP address denoted in
ipSrcGuardBindingsIpAddress type.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.202.20.66.1.48.2.1.3

ipSrcGuardBindingsEntryType

This object indicates that this binding is obtained from
dynamically learning or is a static configuraion.

Enumeration

Enumerated Values:

1	dynamic
3	static

.1.3.6.1.4.1.202.20.66.1.48.2.1.4

ipSrcGuardBindingsIpAddress

This object indicates the allocated IP address of
a DHCP client host.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.202.20.66.1.48.2.1.5

ipSrcGuardBindingsPortIfIndex

This object indicates the port or trunk where a DHCP client
host connects to.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.202.20.66.1.48.2.1.6

ipSrcGuardBindingsLeaseTime

This object indicates the leased time of this DHCP
bindings.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.202.20.66.1.48.2.1.7

ipSrcGuardBindingsStatus

The status of this conceptual row entry. This object issued to
manage the creation and deletion of conceptual rows.
The status column has six defined values: - 'active', which
indicates that the conceptual row is a…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.202.20.66.1.48.2.1.8