SL-VCG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

vcgStackStatusTable

table

.1.3.6.1.4.1.4515.1.1.10.1.1.1 · 1 row entry · 10 columns

Open in standard view

The table containing status information on the relationships
between the VCG and STS sub-layers of network interfaces.

vcgStackStatusEntry entry .1.3.6.1.4.1.4515.1.1.10.1.1.1.1

Information on a particular relationship between two
sub-layers, specifying that one sub-layer runs on
'top' of the other sub-layer.
Each sub-layer corresponds to a conceptual row in the ifTable.
The rows in the table…

Indexes

vcgStackLinkIndex vcgStackStsIndex

Column Syntax OID

vcgStackLinkIndex

The value of the VCG link ifIndex corresponding to the
higher-layer of the relationship.
The structure of the VCG link ifIndex is:
Slot=0,
Port=trunk port number
Type=219
Path=GID.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.1

vcgStackStsIndex

The value of the STS ifIndex corresponding to the
lower-layer of the relationship.
The structure of the STS ifIndex is:
Slot=0
Port=trunk port
Type=50
Path=1st sts number in the sonet path.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.2

vcgStackPathWidth

The width of the path

Enumerationr/w

Enumerated Values:

1	vtWidth45STS1
3	vtWidth155STS3
11	vtWidth15VC11
12	vtWidth2VC12

.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.3

vcgStackSts1Mapping

In the case of sdh sts1 path there are two possibilities for mapping:
1. c3->vc3->tu3->tug3-x3->vc4->au4->aug1 ::tu3(1)
2. c3->vc3->au3-x3->aug1 ::au3(2)
3. Otherwise ::na(3)

Enumerationr/w

Enumerated Values:

1	tu3
2	au3
3	na

.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.4

vcgStackTxSequenceNumber

The tx sequence number of this path.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.5

vcgStackLcasStatusOper

The oper status of the relationship between two sub-layers.
This value is determined by the Admin status and the
Source State and the Sink State of the vcat member.

Enumerationr/w

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.6

vcgStackLcasStatusAdmin

The admin status of the vcat member.
This is relevant only for PL-20. For PL-100 all members are active.

Enumerationr/w

Enumerated Values:

1	active
2	nonActive

.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.7

vcgStackLcasSourceState

The Lcas Source State of the Vcat member.

Enumerationr/w

Enumerated Values:

1	norm
2	dnu
3	add
4	idle

.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.8

vcgStackLcasSinkState

The Lcas Sink State of the Vcat member.

Enumerationr/w

Enumerated Values:

1	ok
2	fail
3	idle

.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.9

vcgStackStatusRow

The row status of the relationship between two sub-layers.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4515.1.1.10.1.1.1.1.10

vcgLinkConfigTable

table

.1.3.6.1.4.1.4515.1.1.10.1.1.2 · 1 row entry · 9 columns

Open in standard view

A table that contains, one entry for each Vcg interface in the,
configuration and service parameters of the Vcg Channel.

vcgLinkConfigEntry entry .1.3.6.1.4.1.4515.1.1.10.1.1.2.1

An entry containing the result configuration and service parameters
of a Vcg Channel.
A new entry is created each when an entry is added to the vcgChannelConfigTable
with a new VCG-if index.
An entry is automaticaly del…

Indexes

vcgLinkConfigIndex

Column Syntax OID

vcgLinkConfigIndex

The ifIndex of the VCG link.
This index is composed of:
Slot=0,
Port=trunk port number,
Type=219,
Path=group id.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.1

vcgLinkConfigType

The type of the vcat group as configured by the NMS.

VcgLinkTyper/w

Textual Convention: VcgLinkType Enumeration

Type Values:

1	framed
2	transparent
3	pos

.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.2

vcgLinkConfigLcasSupport

Should this channel support the LCAS protocol. Configured by the NMS.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.3

vcgLinkConfigExtensionSupport

Should this channel support the GFP extension. Configured by the NMS.
This field should be true if there aremore than one channel on the same VCG.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.4

vcgLinkConfigResetPmCounters

Setting this variable to 1 will cause the current interval VCG PM
counters of the Channel to be initialized to zero (0).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.5

vcgLinkConfigValidIntervals

The number of previous near end intervals for
which data was collected.

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.6

vcgLinkConfigLcasHoldOfTime

The number of milli-seconds to wait before the Lcas make a transition from
Good state to Bad state.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.7

vcgLinkConfigLcasWaitToRestoreTime

The number of milli-seconds to wait before the Lcas make a transition from
Bad state to Good state.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.8

vcgLinkConfigStackApplyChanges

Writing to this object applies the changes done to the vcgStackStatusTable.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4515.1.1.10.1.1.2.1.9

vcgLinkCurrentTable

table

.1.3.6.1.4.1.4515.1.1.10.1.2.1 · 1 row entry · 3 columns

Open in standard view

The VCG current table contains various statistics
being collected for the current 15 minute
interval.

vcgLinkCurrentEntry entry .1.3.6.1.4.1.4515.1.1.10.1.2.1.1

An entry in the VCG Current table.

Indexes

vcgLinkCurrentIndex

Column	Syntax	OID
vcgLinkCurrentIndex The index value which uniquely identifies the VCG interface to which this entry is applicable.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.4515.1.1.10.1.2.1.1.1`
vcgLinkCurrentRxVcatSyncLossSeconds The number of seconds a VCAT sync loss was detected during this interval.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4515.1.1.10.1.2.1.1.2`
vcgLinkCurrentRxLcasCrcErrors The number of Received Lcas messages with CRC error.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4515.1.1.10.1.2.1.1.3`

vcgLinkIntervalTable

table

.1.3.6.1.4.1.4515.1.1.10.1.2.2 · 1 row entry · 4 columns

Open in standard view

The VCG current table contains various statistics
being collected for the current 15 minute
interval.

vcgLinkIntervalEntry entry .1.3.6.1.4.1.4515.1.1.10.1.2.2.1

An entry in the VCG Interval table.

Indexes

vcgLinkIntervalIndex vcgLinkIntervalNumber

Column	Syntax	OID
vcgLinkIntervalIndex The index value which uniquely identifies the VCG interface to which this entry is applicable.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.4515.1.1.10.1.2.2.1.1`
vcgLinkIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.4515.1.1.10.1.2.2.1.2`
vcgLinkIntervalRxVcatSyncLossSeconds The number of seconds a VCAT sync loss was detected during this interval.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4515.1.1.10.1.2.2.1.3`
vcgLinkIntervalRxLcasCrcErrors The number of Lcas messages with CRC error occurences during the interval.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4515.1.1.10.1.2.2.1.4`

vcgLinkDayTable

table

.1.3.6.1.4.1.4515.1.1.10.1.2.3 · 1 row entry · 4 columns

Open in standard view

The Link day table contains various statistics
being collected for the pervious 24 hours.
interval.

vcgLinkDayEntry entry .1.3.6.1.4.1.4515.1.1.10.1.2.3.1

An entry in the Link Day table.

Indexes

vcgLinkDayIndex vcgLinkDayNumber

Column	Syntax	OID
vcgLinkDayIndex The index value which uniquely identifies the Link interface to which this entry is applicable.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.4515.1.1.10.1.2.3.1.1`
vcgLinkDayNumber A number which identifies the 1-day interval for which the set of section related statistics is available. The number is between 1 and n, where n is the number of 1-day intervals supported by the agent. The interval i…	Integer32 Constraints: `range: 1-33`	`.1.3.6.1.4.1.4515.1.1.10.1.2.3.1.2`
vcgLinkDayRxVcatSyncLossSeconds The number of seconds a VCAT sync loss was detected during this interval.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4515.1.1.10.1.2.3.1.3`
vcgLinkDayRxLcasCrcErrors The number of Lcas messages with CRC error occurences during the interval.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4515.1.1.10.1.2.3.1.4`