SCTE-HMS-QAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
19

qamChannelTable

table
.1.3.6.1.4.1.5591.1.11.5.3.1.1.1 · 1 row entry · 8 columns
Open in standard view 
This table describes the configuration and attributes of each
QAM channel of the QAM designated by ifIndex.
qamChannelEntry entry .1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1
There is an entry in the table for each QAM channel. The index
to this table is the ifIndex of each QAM channel.
Indexes
IF-MIBifIndex
Column Syntax OID
qamChannelFrequency
The center frequency of the QAM channel.
HertzSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.1
qamChannelModulationFormat
RF Modululation for this output QAM channel when
qamChannelContWaveMode is off.
SCTE-HMS-HEADENDIDENT-TC-MIBQAMChannelModulationFormat
Textual Convention: SCTE-HMS-HEADENDIDENT-TC-MIBQAMChannelModulationFormat Enumeration
Type Values:
1unknown
2other
3qam64
4qam256
5qam128
6qam512
7qam1024
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.2
qamChannelInterleaverLevel
The interleaver level for FEC coding.

level1 - implies interleaver level 1
level2 - implies interleaver level 2

This object is only valid when AnnexMode has the value annexB.
Enumeration
Enumerated Values:
1level1
2level2
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.3
qamChannelInterleaverMode
The interleaving depth or operation mode of the interleaver.
'taps8Increment16': protection 5.9/4.1 usec,
latency .22/.15 msec
'taps16Increment8': protection 12/8.2 usec,
…
SCTE-HMS-HEADENDIDENT-TC-MIBQAMChannelInterleaveMode
Textual Convention: SCTE-HMS-HEADENDIDENT-TC-MIBQAMChannelInterleaveMode Enumeration
Type Values:
1unknown
2other
3fecI8J16
4fecI16J8
5fecI32J4
6fecI64J2
7fecI128J1
8fecI12J17
9fecI128J2
10fecI128J3
11fecI128J4
12fecI128J5
13fecI128J6
14fecI128J7
15fecI128J8
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.4
qamChannelPower
The output power of the QAM channel. If the QAM channel is muted,
value is not valid.
0.1 dBmVSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.5
qamChannelSquelch
Indicates whether the QAM port is muted or not.
Enumeration
Enumerated Values:
1unmuted
2muted
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.6
qamChannelContWaveMode
Indicates whether Continuous Wave mode is enabled or not for
output.
Enumeration
Enumerated Values:
1cwmOff
2cwmOn
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.7
qamChannelAnnexMode
Specifies the ITU-T standard supported by the QAM channel

annexA - standard specified by Annex A of ITU-T J.83
annexB - standard specified by Annex B of ITU-T J.83
annexC - standard specified by Annex C o…
Enumeration
Enumerated Values:
1unknown
2other
3annexA
4annexB
5annexC
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.1.1.8

qamChannelCommonTable

table
.1.3.6.1.4.1.5591.1.11.5.3.1.1.2 · 1 row entry · 2 columns
Open in standard view 
This table decribes MPEG and DOCSIS characteristics that are
not part of the DOCSIS-IF-MIB.
qamChannelCommonEntry entry .1.3.6.1.4.1.5591.1.11.5.3.1.1.2.1
Each entry of this table describes attributes of an RF channel
for both MPEG and DOCSIS QAMs.
Indexes
IF-MIBifIndex
Column Syntax OID
qamChannelCommonOutputBw
The QAM channel output bandwidth or capacity.
bpsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.2.1.1
qamChannelCommonUtilization
The utilization of the QAM channel in 0.1 percentage.
This rate may be calculated as transport stream packets /
( transport stream packets + null packets ). If not
applicable, a value of -1 is returned.
0.1 PercentInteger32
Constraints:
range: -1-1000
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.2.1.2

qamConfigTable

table
.1.3.6.1.4.1.5591.1.11.5.3.1.1.3 · 1 row entry · 9 columns
Open in standard view 
This table is designed to show the IP addresses configuration
for the QAM channels, optionally UDP port range, Program Number
range associated with QAM channels. Configuring these parameters
is necessary when performing session-based provisioning. A  
session-based provisioning request must conform to the
configurations in this table. The QAM channels within an QAM 
device may be partitioned to support multiple UDP, QAM or
ProgramNo ranges. Though it's helpful to partition the QAM
channels when the total number of QAM channel increases, this is
not a must. This table may also be used to show the reserved UDP
ports, or program numbers for special purposes instead of using
default ones allowed by hardware, software, or MPEG protocol.
qamConfigEntry entry .1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1
Each entry corresponds to the configuration of a QAM channel
range.
Indexes
ENTITY-MIBentPhysicalIndex qamConfigIndex
Column Syntax OID
qamConfigIndex
The table index.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.1
qamConfigQamChannelIdMin
QAMChannelId maybe within a line card or global depending on
entPhysicalIndex.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.2
qamConfigQamChannelIdMax
QAMChannelId maybe within a line card or global depending on
entPhysicalIndex.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.3
qamConfigIPAddrType
The type of the program destination address as defined by
inetAddressType. The default value is 1 for ipv4(1)
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.4
qamConfigIPAddr
IP address of the QAM channel.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.5
qamConfigUdpPortRangeMin
The lowest UDP port of the UDP port range that can be used
on this QAM channel.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.6
qamConfigUdpPortRangeMax
The highest UDP port of the UDP port range that can be used on
this QAM channel.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.7
qamConfigOutputProgNoMin
The lowest MPEG output program number that can be used on the
QAM channel.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.8
qamConfigOutputProgNoMax
The highest MPEG output program number that can be used on the
QAM channel.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5591.1.11.5.3.1.1.3.1.9