S5-ETHERNET-TRAP-MIB
5000 Ethernet Trap MIB
Copyright 1993-2009 Nortel Networks, Inc.
All rights reserved.
This Nortel Networks SNMP Management Information Base Specification
(Specification) embodies Nortel Networks' confidential and
proprietary intellectual property. Nortel Networks retains all
title and ownership in the Specification, including any
revisions.
This Specification is supplied 'AS IS,' and Nortel Networks makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification.
s5EthernetTrapMib
1.3.6.1.4.1.45.1.6.2.1.0
Imported Objects
| S5-ETH-REDUNDANT-LINKS-MIB | s5EnRedPortCompanionBrdNum s5EnRedPortCompanionPortNum s5EnRedPortOperStatus s5EnRedPortRedundMode s5EnRedPortRemoteOperStatus |
| S5-ETHERNET-COMMON-MIB | s5EnPortJabberStatus s5EnPortLinkStatus s5EnPortPartStatus |
| S5-ROOT-MIB | s5EthTrap |
| S5-SWITCH-BAYSECURE-MIB | s5SbsMgmViolationIpAddress s5SbsMgmViolationType s5SbsViolationStatusBrdIndx s5SbsViolationStatusMACAddress s5SbsViolationStatusPortIndx |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE |
Objects (1)
s5EthernetTrapMib
|
.1.3.6.1.4.1.45.1.6.2.1.0 |
Notifications / Traps (19)
| Name | OID | Description |
|---|---|---|
s5EtrSbsMacTableFull
|
.1.3.6.1.4.1.45.1.6.2.1.0.1 |
This trap is sent when the mac-security address table is filled. |
|
s5EtrNewRedPortFailure
S5-ETH-REDUNDANT-LINKS-MIBs5EnRedPortOperStatus S5-ETH-REDUNDANT-LINKS-MIBs5EnRedPortCompanionBrdNum S5-ETH-REDUNDANT-LINKS-MIBs5EnRedPortCompanionPortNum S5-ETHERNET-COMMON-MIBs5EnPortPartStatus S5-ETHERNET-COMMON-MIBs5EnPortLinkStatus S5-ETHERNET-COMMON-MIBs5EnPortJabberStatus
|
.1.3.6.1.4.1.45.1.6.2.1.0.10 |
A port that is in a redundant pair developed a fault.
This trap is sent once when the condition is
first detected. For all objects returned in the trap,
the instance identifies the board and the port index.
The following values are returned:
s5EnRedPortOperStatus.........The status of the port.
The value will distinguish between a
local fault, a remote fault, and a
missing board.
s5EnRedPortCompanionBrdNum....The index of the slot
containing the board of the other port
in the redundant pair.
s5EnRedPortCompanionPortNum...The index of the other
port in the redundant pair.
s5EnPortPartStatus, s5EnPortLinkStatus and
s5EnPortJabberStatus..........These values may help
determine the cause of the local fault.
|
|
s5EtrNewRedBadRemCfgDetected
S5-ETH-REDUNDANT-LINKS-MIBs5EnRedPortRemoteOperStatus S5-ETH-REDUNDANT-LINKS-MIBs5EnRedPortRedundMode
|
.1.3.6.1.4.1.45.1.6.2.1.0.11 |
This trap is sent periodically when the NMM detects a
remoteOperStatus of invalid on a port set for
redundancy. The instance identifies the board and port
index. The following values are returned:
s5EnRedPortRemoteOperStatus.....The value of the
received signal from the remote port.
s5EnRedPortRedundMode...the redundancy mode of the port.
|
|
s5EtrMacAddressTablesThresholdReached
|
.1.3.6.1.4.1.45.1.6.2.1.0.12 |
A s5EtrMacAddressTablesThresholdReached trap signifies that the MAC address tables threshold is reached. |
|
s5EtrSbsMacTableClearedForPort
S5-SWITCH-BAYSECURE-MIBs5SbsViolationStatusBrdIndx S5-SWITCH-BAYSECURE-MIBs5SbsViolationStatusPortIndx
|
.1.3.6.1.4.1.45.1.6.2.1.0.2 |
This trap is sent when the mac-security address table is cleared for a particular port. |
|
s5EtrSbsMacTableCleared
|
.1.3.6.1.4.1.45.1.6.2.1.0.3 |
This trap is sent when the mac-security address table is cleared for all ports. |
|
s5EtrSbsMacRemoved
S5-SWITCH-BAYSECURE-MIBs5SbsViolationStatusBrdIndx S5-SWITCH-BAYSECURE-MIBs5SbsViolationStatusPortIndx S5-SWITCH-BAYSECURE-MIBs5SbsViolationStatusMACAddress
|
.1.3.6.1.4.1.45.1.6.2.1.0.4 |
This trap is sent when a mac address is removed from the mac-security address table. |
|
s5EtrNewSbsMacAccessViolation
S5-SWITCH-BAYSECURE-MIBs5SbsViolationStatusBrdIndx S5-SWITCH-BAYSECURE-MIBs5SbsViolationStatusPortIndx S5-SWITCH-BAYSECURE-MIBs5SbsViolationStatusMACAddress
|
.1.3.6.1.4.1.45.1.6.2.1.0.5 |
This trap is sent when the switch device detects a
Mac_address based security violation on a port set by
s5SbsSecurityAction defined in s5sbs100.mib. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsViolationStatusBrdIndx...the Board number on which
a security violation was seen.
s5SbsViolationStatusPortIndx...the Port number on which
a security violation was seen.
s5SbsViolationStatusMACIndx...the mac address triggers
this violation
|
|
s5EtrNewMgmAccessViolation
S5-SWITCH-BAYSECURE-MIBs5SbsMgmViolationType S5-SWITCH-BAYSECURE-MIBs5SbsMgmViolationIpAddress
|
.1.3.6.1.4.1.45.1.6.2.1.0.6 |
This trap is sent when the switch device detects a
management access violation on the switch. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsMgmViolationType.....WEB access violation or telnet
access violation or SNMP access violation.
s5SbsMgmViolationIpAddress...the invalid IP address.
|
|
s5EtrNewPortManualPart
S5-ETHERNET-COMMON-MIBs5EnPortPartStatus S5-ETHERNET-COMMON-MIBs5EnPortJabberStatus
|
.1.3.6.1.4.1.45.1.6.2.1.0.7 |
A port was manually partitioned (wrapped). This
trap is sent once when the port is initially
partitioned. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
|
|
s5EtrNewPortAutoPart
S5-ETHERNET-COMMON-MIBs5EnPortPartStatus S5-ETHERNET-COMMON-MIBs5EnPortJabberStatus
|
.1.3.6.1.4.1.45.1.6.2.1.0.8 |
A port was auto partitioned (wrapped). This
trap is sent only once when the condition is
first detected. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
|
|
s5EtrNewPortDteJabbering
S5-ETHERNET-COMMON-MIBs5EnPortJabberStatus
|
.1.3.6.1.4.1.45.1.6.2.1.0.9 |
An ethernet DTE started jabbering. This trap
is sent only once when the condition is first
detected. The following values are returned:
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
|
|
s5EtrPortAutoPart
S5-ETHERNET-COMMON-MIBs5EnPortPartStatus S5-ETHERNET-COMMON-MIBs5EnPortJabberStatus
|
.1.3.6.1.4.1.45.1.6.2.1.1 |
A port was auto partitioned (wrapped). This
trap is sent only once when the condition is
first detected. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
|
|
s5EtrPortDteJabbering
S5-ETHERNET-COMMON-MIBs5EnPortJabberStatus
|
.1.3.6.1.4.1.45.1.6.2.1.2 |
An ethernet DTE started jabbering. This trap
is sent only once when the condition is first
detected. The following values are returned:
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
|
|
s5EtrRedPortFailure
S5-ETH-REDUNDANT-LINKS-MIBs5EnRedPortOperStatus S5-ETH-REDUNDANT-LINKS-MIBs5EnRedPortCompanionBrdNum S5-ETH-REDUNDANT-LINKS-MIBs5EnRedPortCompanionPortNum S5-ETHERNET-COMMON-MIBs5EnPortPartStatus S5-ETHERNET-COMMON-MIBs5EnPortLinkStatus S5-ETHERNET-COMMON-MIBs5EnPortJabberStatus
|
.1.3.6.1.4.1.45.1.6.2.1.3 |
A port that is in a redundant pair developed a fault.
This trap is sent once when the condition is
first detected. For all objects returned in the trap,
the instance identifies the board and the port index.
The following values are returned:
s5EnRedPortOperStatus.........The status of the port.
The value will distinguish between a
local fault, a remote fault, and a
missing board.
s5EnRedPortCompanionBrdNum....The index of the slot
containing the board of the other port
in the redundant pair.
s5EnRedPortCompanionPortNum...The index of the other
port in the redundant pair.
s5EnPortPartStatus, s5EnPortLinkStatus and
s5EnPortJabberStatus..........These values may help
determine the cause of the local fault.
|
|
s5EtrRedBadRemCfgDetected
S5-ETH-REDUNDANT-LINKS-MIBs5EnRedPortRemoteOperStatus S5-ETH-REDUNDANT-LINKS-MIBs5EnRedPortRedundMode
|
.1.3.6.1.4.1.45.1.6.2.1.4 |
This trap is sent periodically when the NMM detects a
remoteOperStatus of invalid on a port set for
redundancy. The instance identifies the board and port
index. The following values are returned:
s5EnRedPortRemoteOperStatus.....The value of the
received signal from the remote port.
s5EnRedPortRedundMode...the redundancy mode of the port.
|
|
s5EtrSbsMacAccessViolation
S5-SWITCH-BAYSECURE-MIBs5SbsViolationStatusBrdIndx S5-SWITCH-BAYSECURE-MIBs5SbsViolationStatusPortIndx S5-SWITCH-BAYSECURE-MIBs5SbsViolationStatusMACAddress
|
.1.3.6.1.4.1.45.1.6.2.1.5 |
This trap is sent when the switch device detects a
Mac_address based security violation on a port set by
s5SbsSecurityAction defined in s5sbs100.mib. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsViolationStatusBrdIndx...the Board number on which
a security violation was seen.
s5SbsViolationStatusPortIndx...the Port number on which
a security violation was seen.
s5SbsViolationStatusMACIndx...the mac address triggers
this violation
|
|
s5EtrMgmAccessViolation
S5-SWITCH-BAYSECURE-MIBs5SbsMgmViolationType S5-SWITCH-BAYSECURE-MIBs5SbsMgmViolationIpAddress
|
.1.3.6.1.4.1.45.1.6.2.1.6 |
This trap is sent when the switch device detects a
management access violation on the switch. This trap
is sent only once when the condition is first detected.
The following values are returned:
s5SbsMgmViolationType.....WEB access violation or telnet
access violation or SNMP access violation.
s5SbsMgmViolationIpAddress...the invalid IP address.
|
|
s5EtrPortManualPart
S5-ETHERNET-COMMON-MIBs5EnPortPartStatus S5-ETHERNET-COMMON-MIBs5EnPortJabberStatus
|
.1.3.6.1.4.1.45.1.6.2.1.7 |
A port was manually partitioned (wrapped). This
trap is sent once when the port is initially
partitioned. The following values are
returned:
s5EnPortPartStatus.....the partition status
of the port, with the instance identifying
the board and the port.
s5EnPortJabberStatus...the jabber status of
the DTE(s) connected to the port, with the
instance identifying the board and the port.
|