RUCKUS-SZ-CONFIG-WLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
19
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1 · 1 row entry · 19 columns
SZ WLAN table.
ruckusSZConfigWLANEntry entry .1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1
Specifies each SZ WLAN configuration entry.
Indexes
ruckusSZConfigWLANID
Column Syntax OID
ruckusSZConfigWLANID
this Wireless LAN(WLAN) ID
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.1
ruckusSZConfigWLANSSID
SSID for this Wireless LAN.
OctetString
Constraints:
range: 2-32
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.2
ruckusSZConfigWLANDescription
Description for this Wireless LAN.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.3
ruckusSZConfigWLANName
Name for this Wireless LAN
OctetString
Constraints:
range: 2-32
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.4
ruckusSZConfigWLANWLANServiceType
The the Service type for the Wireless LAN.
Enumeration
Enumerated Values:
1standardUsage
2hotspot
3guest
4webauth
5hotspot20
6hotspot20-osen
7weChat
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.8
ruckusSZConfigWLANAuthentication
Authentication method choosen for this Wireless LAN.
Enumeration
Enumerated Values:
1open
2eap
3mac-address
4eapMacAddress
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.10
ruckusSZConfigWLANEncryption
Encryption method choosen for this Wireless LAN.
Enumerationr/w
Enumerated Values:
1wpa2
2wpa-Mixed
3wep-64
4wep-128
5none-enc
6wpa3
7wpa2Wpa3Mixed
8owe
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.12
ruckusSZConfigWLANWEPKeyIndex
Select the WEP key index for the WEP encryption.
for 802.1x wlan(eap), this node should not be set.
Integer32r/w
Constraints:
range: 1-4
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.15
ruckusSZConfigWLANWEPKey
Enter the Pass-phrase for the WEP encryption method.
Only 10 or 26 Hex character.such as: 1122334455
for 802.1x wlan(eap), this node should not be set.
OctetStringr/w
Constraints:
range: 10-10
range: 26-26
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.16
ruckusSZConfigWLANWPACipherType
Enter the encryption cipher method for the WPA encryption.
For WPA2, aes is only supported. null is only for read
Enumerationr/w
Enumerated Values:
1aes
2tkipaes
3null
4aesGCMP256
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.20
ruckusSZConfigWLANWPAKey
Enter the Pass-phrase for the WPA encryption.
Specifies the WPA PSK (Wi-Fi Protected Access
Pre Shared key)
If the key length is 64 then all 64 characters should be in hex,
otherwise the key assumed to be ascii.
for 802…
OctetStringr/w
Constraints:
range: 8-64
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.21
ruckusSZConfigWLANSAEPassphrase
Enter the The SAE Passphrase for WPA3 encryption.
If the key length is 64 then all 64 characters should be in hex,
otherwise the key assumed to be ascii.
for 802.1x wlan(eap), this node should not be set.
OctetStringr/w
Constraints:
range: 8-64
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.23
ruckusSZConfigWLANWirelessClientIsolation
set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet.
for Guest and webauth WLAN type, it must be 'enable'.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.28
ruckusSZConfigWLANZeroITActivation
Enable the Zero IT Activation Service of the Wireless LAN or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.30
ruckusSZConfigWLANServicePriority
Select the QOS service priority for the Wireless LAN.
Enumerationr/w
Enumerated Values:
1high
2low
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.32
ruckusSZConfigWLANAccountingUpdateInterval
Enter interval in minutes to update Accounting Server.
Integer32r/w
Constraints:
range: 1-60
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.36
ruckusSZConfigWLANVlanID
Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged.
Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.45
ruckusSZConfigWLANHideSSID
Hide SSID, not to broadcast it SSID.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.50
ruckusSZConfigWLANMaxClientsPerAP
Select the Number of client devices the AP can service for the Wireless LAN.
Integer32r/w
Constraints:
range: 1-512
.1.3.6.1.4.1.25053.1.4.2.2.1.1.1.1.55