REPEATER-REV4-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
28
Rows
28
Columns
177

rptrRedundCrctTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.2 · 1 row entry · 9 columns
Open in standard view 
A list of redundant circuit objects for this repeater.
rptrRedundCrctEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1
A list of objects for a particular redundant circuit.
Indexes
rptrRedundCrctId
Column Syntax OID
rptrRedundCrctId mandatory
Returns the index for a member circuit in the table of
redundant circuits.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.1
rptrRedundCrctName mandatory
Get/Set the name of the indicated circuit.
OctetStringr/w .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.2
rptrRedundCrctRetrys mandatory
Get/Set the the number of unanswered polls allowed for
the circuit.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.3
rptrRedundCrctNumBPs mandatory
Get the number of board/port combinations associated with
the circuit.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.4
rptrRedundCrctNumAddr mandatory
Get the number of IP Addresses associated with the circuit.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.5
rptrRedundCrctAddAddr mandatory
Add an IP Address to the polling list for the indicated circuit.
RFC1155-SMINetworkAddressr/w
Textual Convention: RFC1155-SMINetworkAddress OctetString
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.6
rptrRedundCrctDelAddr mandatory
Delete an IP Address from the polling list of the indicated
circuit.
RFC1155-SMINetworkAddressr/w
Textual Convention: RFC1155-SMINetworkAddress OctetString
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.7
rptrRedundCrctEnable mandatory
If this object is set to Enable, the circuit is enabled. If
this object is set to Disable, the circuit is disbabled. When
read, this object returns the state of the object based on the
last request made.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.8
rptrRedundCrctReset mandatory
If this object is set to Reset, the circuit is reset. All
of the circuit's associated boards and ports are returned to
NOT_USED, any associated IP Addresses are purged from the
circuit's address list, the name is clear…
Enumerationr/w
Enumerated Values:
1noReset
2reset
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9

rptrRedundPortTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.3 · 1 row entry · 5 columns
Open in standard view 
A list of redundant port objects for this repeater.
rptrRedundPortEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1
A redundant port entry containing objects pertaining to
a particular redundant port.
Indexes
rptrRedundPortCrctId rptrRedundPortId
Column Syntax OID
rptrRedundPortId mandatory
A unique value identifying an element in a sequence of member
ports which belong to a circuit in the table of redundant
circuits. This value is not a port number; rather it is a value
which goes from 1 to the maximum n…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.1
rptrRedundPortCrctId mandatory
A unique value identifying a member circuit in the table of
redundant circuits. This value is similar to rptrRedundCrctId.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.2
rptrRedundPortNum mandatory
Returns the port number of a member port belonging to a redundant
circuit.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.3
rptrRedundPortBoardNum mandatory
Returns the board number of a member port belonging to a
redundant circuit.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.4
rptrRedundPortType mandatory
Return the state of a port associated with the indicated circuit.
Enumeration
Enumerated Values:
1notUsed
2primary
3backup
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.3.1.5

rptrRedundAddrTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.1.4.4 · 1 row entry · 3 columns
Open in standard view 
A list of redundant IP Address objects which belong to a circuit
for this repeater.
rptrRedundAddrEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1
A entry containing objects pertaining to a particular redundant
IP Address which belongs to a circuit.
Indexes
rptrRedundAddrCrctId rptrRedundAddrId
Column Syntax OID
rptrRedundAddrId mandatory
A unique value identifying an element in a sequence of member
IP Addresses which belong to a circuit in the table of redundant
circuits. This value goes from 1 to the maximum number of IP
Addresses which may be include…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.1
rptrRedundAddrCrctId mandatory
A unique value identifying a member circuit in the table of
redundant circuits. This value is similar to rptrRedundCrctId.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.2
rptrRedundAddrIPAddr mandatory
Returns an IP Address associated with the indicated circuit.
RFC1155-SMINetworkAddress
Textual Convention: RFC1155-SMINetworkAddress OctetString
 .1.3.6.1.4.1.52.4.1.1.1.4.1.4.4.1.3

rptrSrcAddrListTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.1 · 1 row entry · 2 columns
Open in standard view 
This table defines the source address list that is defined at
the repeater level.
rptrSrcAddrListEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1
Defines a specific source address object.
Indexes
rptrSrcAddrListId
Column Syntax OID
rptrSrcAddrListId mandatory
Returns an index into a table of source address seen by this
repeater.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.1
rptrSrcAddrAddressList mandatory
Returns a source address seen by this repeater.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.52.4.1.1.1.4.1.5.1.1.2

rptrSrcAddrSrcTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.1.5.2 · 1 row entry · 3 columns
Open in standard view 
This table defines the list of all source addresses that have been
seen.
rptrSrcAddrSrcTableEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1
Describes a particular source address source entry.
Indexes
rptrSrcAddrSrcTableEntryId
Column Syntax OID
rptrSrcAddrSrcTableEntryId mandatory
Returns the source address to which this table's information
pertains.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.1
rptrSrcAddrSrcTableEntryPort mandatory
Returns the port# of the port that sourced the source address.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.2
rptrSrcAddrSrcTableEntryPortGroup mandatory
Returns the port group# of the port that sourced the source address.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.1.5.2.1.3

rptrPortGrpMgmtTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.2.1 · 1 row entry · 7 columns
Open in standard view 
A list of port management objects for this repeater node.
rptrPortGrpMgmtEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1
An entry containing objects pertaining to port management
for a port group.
Indexes
rptrPortGrpMgmtGrpId
Column Syntax OID
rptrPortGrpMgmtGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.1
rptrPortGrpMgmtName mandatory
Gets/Sets a name for the specified port group.
OctetStringr/w
Constraints:
range: 20-20
 .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.2
rptrPortGrpMgmtPortCount mandatory
Get total number of ports contained on the board.

Notice that this is the physical port count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.3
rptrPortGrpMgmtPortsEnable mandatory
Setting this object to Enable will cause all the ports
residing in this network segment to be enabled. Setting
this object to noEnable will have no effect. When read
this object will always return noEnable.
Enumerationr/w
Enumerated Values:
1noEnable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.4
rptrPortGrpMgmtPortsOn mandatory
Get total number of ON ports in this port group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.5
rptrPortGrpMgmtPortsOper mandatory
Get total number of operational ports in the port group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.6
rptrPortGrpMgmtLogPortCount mandatory
Get total number of ports contained in this port group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.1.1.7

rptrPortGrpPktStatsTbl

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.1 · 1 row entry · 10 columns
Open in standard view 
This table provides packet statistics for port group.
rptrPortGrpPktStatsEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1
Defines a specific packet statistics entry.
Indexes
rptrPortGrpPktStatsId
Column Syntax OID
rptrPortGrpPktStatsId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.1
rptrPortGrpPktStatsPkts mandatory
Return this port group's total received packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.2
rptrPortGrpPktStatsBytes mandatory
Return this port group's total received bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.3
rptrPortGrpPktStatsColls mandatory
Return this port group's total collisions.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.4
rptrPortGrpPktStatsErrors mandatory
Return this port group's total errors.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.5
rptrPortGrpPktStatsAlign mandatory
Return this port group's total frame alignment errors.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.6
rptrPortGrpPktStatsCRC mandatory
Return this port group's total CRC errors.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.7
rptrPortGrpPktStatsOOW mandatory
Return this port group's total out-of-window collisions.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.8
rptrPortGrpPktStatsBroadcasts mandatory
Return this port group's total received broadcast packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.9
rptrPortGrpPktStatsMulticasts mandatory
Return this port group's total received multicast packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.1.1.10

rptrPortGrpProtocolTbl

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.2 · 1 row entry · 10 columns
Open in standard view 
Provides port group protocol statistics.
rptrPortGrpProtocolEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1
Defines a specific port group protocol statistics entry.
Indexes
rptrPortGrpProtocolId
Column Syntax OID
rptrPortGrpProtocolId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.1
rptrPortGrpProtocolOSI mandatory
Return this port group's total received OSI packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.2
rptrPortGrpProtocolNovell mandatory
Return this port group's total received Novell packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.3
rptrPortGrpProtocolBanyan mandatory
Return this port group's total received Banyan packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.4
rptrPortGrpProtocolDECNet mandatory
Return this port group's total received DECNet packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.5
rptrPortGrpProtocolXNS mandatory
Return this port group's total received XNS packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.6
rptrPortGrpProtocolIP mandatory
Return this port group's total received TCP/IP packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.7
rptrPortGrpProtocolCtron mandatory
Return this port group's total received CTRON Management packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.8
rptrPortGrpProtocolAppletalk mandatory
Return this port group's total received Appletalk packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.9
rptrPortGrpProtocolOther mandatory
Return this port group's total received unknown protocol packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.2.1.10

rptrPortGrpFrameSzTbl

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.2.2.3 · 1 row entry · 8 columns
Open in standard view 
Defines frame sizes as seen by this port group.
rptrPortGrpFrameSzEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1
Defines a particular frame size entry.
Indexes
rptrPortGrpFrameSzId
Column Syntax OID
rptrPortGrpFrameSzId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.1
rptrPortGrpFrameSzRunt mandatory
Return this port group's total received packets of size less
than 64 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.2
rptrPortGrpFrameSz64To127 mandatory
Return this port group's total received packets of size between
64 and 127 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.3
rptrPortGrpFrameSz128To255 mandatory
Return this port group's total received packets of size between
128 and 255 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.4
rptrPortGrpFrameSz256To511 mandatory
Return this port group's total received packets of size between
256 and 511 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.5
rptrPortGrpFrameSz512To1023 mandatory
Return this port group's total received packets of size between
512 and 1023 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.6
rptrPortGrpFrameSz1024To1518 mandatory
Return this port group's total received packets of size between
1024 and 1518 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.7
rptrPortGrpFrameSzGiant mandatory
Return this port group's total received packets of size greater
than 1518 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.2.2.3.1.8

rptrPortGrpAlarmTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.2.3 · 1 row entry · 14 columns
Open in standard view 
A list of port group alarm objects for this repeater node.
rptrPortGrpAlarmEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1
An entry containing objects pertaining to port group alarms
for a port group.
Indexes
rptrPortGrpAlarmId
Column Syntax OID
rptrPortGrpAlarmId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.1
rptrPortGrpAlarmTrafEnable mandatory
Get returns whether traffic alarms are enabled/disabled.
Set allows for enabling/disabling of traffic alarms.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.2
rptrPortGrpAlarmTrafThreshold mandatory
The maximum number of packets that will be allowed before
an alarm is generated.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3
rptrPortGrpAlarmTrafGrpDisable mandatory
Set will permit a port group to be disabled on a traffic alarm
condition. Get will show whether the port group disabling is
allowed or not.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.4
rptrPortGrpAlarmCollEnable mandatory
Get returns whether collision alarms are enabled/disabled.
Set allows for enabling/disabling of collision alarms.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.5
rptrPortGrpAlarmCollThreshold mandatory
The collision threshold is the maximum number of collisions
within the time base that will be allowed before an alaram
is generated.
Integer32r/w
Constraints:
range: 1-999999
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.6
rptrPortGrpAlarmCollBdDisable mandatory
Set will permit a port group to be disabled on a collision alarm
condition. Get will show whether the port group disabling is allowed
or not.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.7
rptrPortGrpAlarmErrEnable mandatory
Get returns whether error alarms are enabled/disabled.
Set allows for enabling/disabling of error alarms.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.8
rptrPortGrpAlarmErrThreshold mandatory
Get/Set the percentage of errors per good packet within the
timebase that will cause an alarm.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.9
rptrPortGrpAlarmErrSource mandatory
Get/Set a bit encoded map of which errors to include in the
error sum, as follows:

CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_e…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.10
rptrPortGrpAlarmErrGrpDisable mandatory
Set will permit a port group to be disabled on an error alarm
condition. Get will show whether the port group disabling is
allowed or not.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.11
rptrPortGrpAlarmBroadEnable mandatory
Get returns whether broadcast alarms are enabled/disabled.
Set allows for enabling/disabling of broadcast alarms.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.12
rptrPortGrpAlarmBroadThreshold mandatory
The broadcase threshold represents the maximum number of
broadcasts that are allowed during the time base before an
alarm is generated.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.13
rptrPortGrpAlarmBroadGrpDisable mandatory
Set will permit a port group to be disabled on a broadcast alarm
condition. Get will show whether the port group disabling is
allowed or not.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.14

rptrPortGrpSrcAddrTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.2.4 · 1 row entry · 2 columns
Open in standard view 
This table provides a list of the number of active users that
have been seen by port group.
rptrPortGrpSrcAddrEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.2.4.1
Defines a specific active user entry.
Indexes
rptrPortGrpSrcAddrId
Column Syntax OID
rptrPortGrpSrcAddrId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.1
rptrPortGrpSrcAddrActiveUsers mandatory
Returns the total number of active users seen by this port group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.4.1.2

rptrPortGrpHwTrapTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1 · 1 row entry · 3 columns
Open in standard view 
A list of trap enable/disable at the port group level.  Disable
here is equivalent to disable for each port in the port group.
rptrPortGrpHwTrapEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1
Individual trap entries for port group enable/disable.
Indexes
rptrPortGrpHwTrapSetGrpId
Column Syntax OID
rptrPortGrpHwTrapSetGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.1
rptrPortGrpHwTrapSetLink mandatory
Enables and disables link traps for the specified port group.
Setting a value of disable(1) is equivalent to setting all instances
of rptrPortHwTrapSetLink to a value of disable(1). Setting a value
of enable(2) is equi…
Enumerationr/w
Enumerated Values:
1disable
2enable
3other
 .1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.2
rptrPortGrpHwTrapSetSeg mandatory
Enables and disables segmentation traps for the specified port group.
Setting a value of disable(1) is equivalent to setting all instances
of rptrPortHwTrapSetSeg to a value of disable(1). Setting a value
of enable(2) …
Enumerationr/w
Enumerated Values:
1disable
2enable
3other
 .1.3.6.1.4.1.52.4.1.1.1.4.2.5.1.1.1.3

rptrPortGrpSaTrapTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1 · 1 row entry · 2 columns
Open in standard view 
A list of trap enable/disable at the port group level.  Disable
here is equivalent to disable for each port in the port group.
rptrPortGrpSaTrapEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1
Individual trap entries for port group enable/disable.
Indexes
rptrPortGrpSaTrapSetGrpId
Column Syntax OID
rptrPortGrpSaTrapSetGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.1
rptrPortGrpSaTrapSetSrcaddr mandatory
Enables and disables source address traps for the specified port group.
Setting a value of disable(1) is equivalent to setting all instances
of rtprPortSaTrapSetSrcaddr to a value of disable(1). Setting a value
of enab…
Enumerationr/w
Enumerated Values:
1disable
2enable
3other
 .1.3.6.1.4.1.52.4.1.1.1.4.2.5.2.1.1.2

rptrPortGrpSrcAddrLockTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.2.6 · 1 row entry · 5 columns
Open in standard view 
This table defines the status of the port group source address
security locks.
rptrPortGrpSrcAddrLockEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1
DeDefines a status of a particular port group security lock.
Indexes
rptrPortGrpSrcAddrLockGrpId
Column Syntax OID
rptrPortGrpSrcAddrLockGrpId mandatory
Defines a particular port group for which this source address
security lock information pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.1
rptrPortGrpSrcAddrLock mandatory
Allows setting of the security lock status for this port group.

unlock(1) - Unlocks the source address lock this group,
lock(2) - Locks the source address for this group,

Setting a value of…
Enumerationr/w
Enumerated Values:
1unlock
2lock
3portMisMatch
 .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.2
rptrPortGrpSASecuritySecureState mandatory
The state of the source addressing security for this port group.
Ports on the port group that are secure(1), can be locked
in order to enable security. When a value of nonSecure(2) is
returned ports cannot be locked.
…
Enumeration
Enumerated Values:
1secure
2nonSecure
3portMisMatch
 .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.3
rptrPortGrpSASecurityLearnState mandatory
The learn state of source addressing security for this port group.
This object will only be applied to ports that are unlocked. If set
to learn(1), all addresses are deleted on the port and learning begins
once again. …
Enumerationr/w
Enumerated Values:
1learn
2noLearn
3portMisMatch
 .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.4
rptrPortGrpSASecurityLearnMode mandatory
The learn mode of source addressing security port group. If set
to oneTime(1), each port is capable of learning two addresses and
securing on both destination and source addresses once they are
locked. If set to conti…
Enumerationr/w
Enumerated Values:
1oneTime
2continuous
3portMisMatch
 .1.3.6.1.4.1.52.4.1.1.1.4.2.6.1.5

rptrPortMgmtTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.1 · 1 row entry · 6 columns
Open in standard view 
A list of port management objects for this repeater node.
rptrPortMgmtEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1
An entry containing objects pertaining to port management for
a port.
Indexes
rptrPortMgmtPortGrpId rptrPortMgmtPortId
Column Syntax OID
rptrPortMgmtPortId mandatory
Returns an index to a port for which the information in this
table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.1
rptrPortMgmtPortGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.2
rptrPortMgmtName mandatory
Sets/Gets an ASCII name assigned to this port.
OctetStringr/w
Constraints:
range: 20-20
 .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.3
rptrPortMgmtAdminState mandatory
Setting this object to Enable will cause port to be enabled.
Setting this object to Disable will cause
the port to be disabled. When read this object will return
the state of the object per the last request.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.4
rptrPortMgmtOperState mandatory
Get port operational status.
Enumeration
Enumerated Values:
1notOperational
2operational
 .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.5
rptrPortMgmtPortType mandatory
Uniquely defines the repeater port type. A authoritative
identification for a port type. By convention, this value
is allocated within the SMI enterprises subtree
(1.3.6.1.4.1), and provides an easy and unambiguous me…
ObjectIdentifier .1.3.6.1.4.1.52.4.1.1.1.4.3.1.1.6

rptrPortPktStatsTbl

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.1 · 1 row entry · 11 columns
Open in standard view 
Provides repeater port packet statistics.
rptrPortPktStatsEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1
Provides basic statistics for a specific port.
Indexes
rptrPortPktStatsPortGrpId rptrPortPktStatsPortId
Column Syntax OID
rptrPortPktStatsPortId mandatory
Returns an index to a port for which the information in this
table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.1
rptrPortPktStatsPortGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.2
rptrPortPktStatsPackets mandatory
Get this port's total received packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.3
rptrPortPktStatsBytes mandatory
Get this port's total received bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.4
rptrPortPktStatsColls mandatory
Get this port's total collisions.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.5
rptrPortPktStatsErrors mandatory
Get this port's total errors.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.6
rptrPortPktStatsAlign mandatory
Get this port's total frame alignment errors.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.7
rptrPortPktStatsCRC mandatory
Get this port's total CRC errors.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.8
rptrPortPktStatsOOW mandatory
Get this port's total out-of-window collisions.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.9
rptrPortPktStatsBroadcasts mandatory
Get this port's total received broadcast packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.10
rptrPortPktStatsMulticasts mandatory
Get this port's total received multicast packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.1.1.11

rptrPortProtocolTbl

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.2 · 1 row entry · 11 columns
Open in standard view 
Provides statistics about the protocols seen by the different
ports.
rptrPortProtocolEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1
An entry containing objects pertaining to statistics about
protocols seen by different ports.
Indexes
rptrPortProtocolPortGrpId rptrPortProtocolPortId
Column Syntax OID
rptrPortProtocolPortId mandatory
Returns an index to a port for which the information in this
table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.1
rptrPortProtocolPortGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.2
rptrPortProtocolOSI mandatory
Get this port's total received OSI protocol packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.3
rptrPortProtocolNovell mandatory
Get this port's total received Novell protocol packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.4
rptrPortProtocolBanyan mandatory
Get this port's total received Banyan protocol packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.5
rptrPortProtocolDECNet mandatory
Get this port's total received DECNet protocol packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.6
rptrPortProtocolXNS mandatory
Get this port's total received XNS protocol packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.7
rptrPortProtocolIP mandatory
Get this port's total received TCP/IP protocol packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.8
rptrPortProtocolCtron mandatory
Get this port's total received CTRON Management protocol packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.9
rptrPortProtocolAppletalk mandatory
Get this port's total received Appletalk protocol packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.10
rptrPortProtocolOther mandatory
Get this port's total received unknown protocol packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.2.1.11

rptrPortFrameSzTbl

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.2.3 · 1 row entry · 9 columns
Open in standard view 
Provides repeater port frame size statistics.
rptrPortFrameSzEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1
Describes a set of frame size statistics for a specific port.
Indexes
rptrPortFrameSzPortGrpId rptrPortFrameSzPortId
Column Syntax OID
rptrPortFrameSzPortId mandatory
Returns an index to a port for which the information in this
table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.1
rptrPortFrameSzPortGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.2
rptrPortFrameSzRunt mandatory
Get this port's total received packets of size less than 64 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.3
rptrPortFrameSz64To127 mandatory
Get this port's total received packets of size between 64 and
127 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.4
rptrPortFrameSz128To255 mandatory
Get this port's total received packets of size between 128
and 255 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.5
rptrPortFrameSz256To511 mandatory
Get this port's total received packets of size between 256
and 511 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.6
rptrPortFrameSz512To1023 mandatory
Get this port's total received packets of size between 512
and 1023 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.7
rptrPortFrameSz1024To1518 mandatory
Get this port's total received packets of size between 1024
and 1518 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.8
rptrPortFrameSzGiant mandatory
Get this port's total received packets of size greater than
1518 bytes.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.1.1.1.4.3.2.3.1.9

rptrPortAlarmTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.3 · 1 row entry · 15 columns
Open in standard view 
A list of port alarm objects for this repeater node.
rptrPortAlarmEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1
An entry containing objects pertaining to port alarm objects
for a port group.
Indexes
rptrPortAlarmPortGrpId rptrPortAlarmPortId
Column Syntax OID
rptrPortAlarmPortId mandatory
Returns an index to a port for which the information in this
table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.1
rptrPortAlarmPortGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.2
rptrPortAlarmTrafEnable mandatory
Get returns whether traffic alarms are enabled/disabled.
Set allows for enabling/disabling of traffic alarms.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.3
rptrPortAlarmTrafThreshold mandatory
The maximum number of packets that will be allowed before
an alarm is generated.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.4
rptrPortAlarmTrafPortDisable mandatory
Set will permit a port to be disabled on a traffic alarm
condition. Get will show whether the port disabling is allowed
or not.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.5
rptrPortAlarmCollEnable mandatory
Get returns whether collision alarms are enabled/disabled.
Set allows for enabling/disabling of collision alarms.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.6
rptrPortAlarmCollThreshold mandatory
The collision threshold is the maximum number of collisions
within the time base that will be allowed before an alaram
is generated.
Integer32r/w
Constraints:
range: 1-999999
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.7
rptrPortAlarmCollPortDisable mandatory
Set will permit a port to be disabled on a collision alarm
condition. Get will show whether the port disabling is allowed
or not.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.8
rptrPortAlarmErrEnable mandatory
Get returns whether error alarms are enabled/disabled.
Set allows for enabling/disabling of error alarms.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.9
rptrPortAlarmErrThreshold mandatory
Get/Set the percentage of errors per good packet within the
timebase that will cause an alarm.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10
rptrPortAlarmErrSource mandatory
Get/Set a bit encoded map of which errors to include in the
error sum, as follows:

CRC_errors - Bit 0 - Least Significant Bit
runts - Bit 1
OOW_colls - Bit 2
align_e…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.11
rptrPortAlarmErrPortDisable mandatory
Set will permit a port to be disabled on an error alarm condition.
Get will show whether the port disabling is allowed or not.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.12
rptrPortAlarmBroadEnable mandatory
Get returns whether broadcast alarms are enabled/disabled.
Set allows for enabling/disabling of broadcast alarms.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.13
rptrPortAlarmBroadThreshold mandatory
The broadcase threshold represents the maximum number of
broadcasts that are allowed during the time base before an
alarm is generated.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.14
rptrPortAlarmBroadPortDisable mandatory
Set will permit a port to be disabled on a broadcast alarm
condition. Get will show whether the port disabling is allowed
or not.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.15

rptrPortRedundTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.4 · 1 row entry · 5 columns
Open in standard view 
A list of port redundancy objects for this repeater node.
rptrPortRedundEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1
An entry containing objects pertaining to port redundancy for
a port group.
Indexes
rptrPortRedundPortGrpId rptrPortRedundPortId
Column Syntax OID
rptrPortRedundPortId mandatory
Returns an index to a port for which the information in this
table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.1
rptrPortRedundPortGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.2
rptrPortRedundCrctNum mandatory
Get/Set redundant circuit number of redundant circuit that port
is or is to be associated with.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.3
rptrPortRedundType mandatory
Get/Set redundant port type.
Enumerationr/w
Enumerated Values:
1notUsed
2primary
3backup
 .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.4
rptrPortRedundStatus mandatory
Get/Set redundant port status.
Enumerationr/w
Enumerated Values:
1notUsed
2active
3inactive
 .1.3.6.1.4.1.52.4.1.1.1.4.3.4.1.5

rptrPortSrcAddrTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.5 · 1 row entry · 5 columns
Open in standard view 
A list of port source address objects for this repeater
node.
rptrPortSrcAddrEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1
An entry containing objects pertaining to port source
address objects for a port group.
Indexes
rptrPortSrcAddrPortGrpId rptrPortSrcAddrPortId
Column Syntax OID
rptrPortSrcAddrPortId mandatory
Returns an index to a port for which the information in this
table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.1
rptrPortSrcAddrPortGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.2
rptrPortSrcAddrTopoState mandatory
Returns the topological state of the port.
Enumeration
Enumerated Values:
1station
2trunk
 .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.3
rptrPortSrcAddrForceTrunk mandatory
When this object is set to Force it causes the port
to be placed into a Trunk topological state whether
the network traffic would warrant such a state or not.
When this object is set to NoForce it allows the port
to ass…
Enumerationr/w
Enumerated Values:
1noForce
2force
 .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4
rptrPortSrcAddrActiveUsers mandatory
Returns the total number of active users seen by this port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.5

rptrPortSrcAddrListTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.6 · 1 row entry · 4 columns
Open in standard view 
This table provides information about the source addresses that
have been seen by the differnt ports.
rptrPortSrcAddrListEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1
A specific source address that has been seen
Indexes
rptrPortSrcAddrListPortGrpId rptrPortSrcAddrListPortId rptrPortSrcAddrListId
Column Syntax OID
rptrPortSrcAddrListId mandatory
Returns an index associated with the number of address to be returned.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.1
rptrPortSrcAddrListPortId mandatory
Returns an index to a port for which the information in this
table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.2
rptrPortSrcAddrListPortGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.3
rptrPortSrcAddrAddressList mandatory
Returns a source address seen on this port.
OctetString .1.3.6.1.4.1.52.4.1.1.1.4.3.6.1.4

rptrPortHardwareTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.7 · 1 row entry · 4 columns
Open in standard view 
A list of port hardware objects for this repeater port.
rptrPortHardwareEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1
An entry containing objects pertaining to port hardware for a
hardware port group.
Indexes
rptrPortHardwarePortGrpId rptrPortHardwarePortId
Column Syntax OID
rptrPortHardwarePortId mandatory
Returns an index to a port for which the information in this
table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.1
rptrPortHardwarePortGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.2
rptrPortHardwareSegStatus mandatory
Returns port segmentation status.
Enumeration
Enumerated Values:
1notSegmented
2segmented
 .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.3
rptrPortHardwareLinkStatus mandatory
Returns port link status.
Enumeration
Enumerated Values:
1notLinked
2linked
3notApplicable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.7.1.4

rptrPortHwTrapTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1 · 1 row entry · 4 columns
Open in standard view 
A list of trap enable/disable at the port level.
rptrPortHwTrapEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1
Individual trap entries for port group enable/disable.
Indexes
rptrPortHwTrapSetPortGrpId rptrPortHwTrapSetPortId
Column Syntax OID
rptrPortHwTrapSetPortId mandatory
Returns an index to a port for which the information in this
table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.1
rptrPortHwTrapSetPortGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.2
rptrPortHwTrapSetLink mandatory
Enables and disables link traps for this port.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.3
rptrPortHwTrapSetSeg mandatory
Enables and disables segmentation traps for this port.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.8.1.1.1.4

rptrPortSaTrapTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1 · 1 row entry · 3 columns
Open in standard view 
A list of trap enable/disable at the port level
rptrPortSaTrapEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1
Individual trap entries for port group enable/disable.
Indexes
rptrPortSaTrapSetPortGrpId rptrPortSaTrapSetPortId
Column Syntax OID
rptrPortSaTrapSetPortId mandatory
Returns an index to a port for which the information in this
table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.1
rptrPortSaTrapSetPortGrpId mandatory
Returns an index to a port group for which the information in
this table pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.2
rptrPortSaTrapSetSrcaddr mandatory
Enables and disables source address traps for this port.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.3

rptrPortSecurityTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.1 · 1 row entry · 11 columns
Open in standard view 
This table defines status of the source lock security.
rptrPortSecurityEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1
Defines lock status for this particular entry.
Indexes
rptrPortSecurityPortGrpId rptrPortSecurityPortId
Column Syntax OID
rptrPortSecurityPortGrpId mandatory
The port Group ID for which this source address lock entry
pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.1
rptrPortSecurityPortId mandatory
The port ID for which this source address lock entry pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.2
rptrPortSecurityLockStatus mandatory
Defines the lock status for this particular port entry.
Enumerationr/w
Enumerated Values:
1unlock
2lock
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.3
rptrPortSecurityLockAddAddress mandatory
Setting a value to this object will cause a new entry to be
added to the rptrPortSecurityListTable. When read this object
will display an OCTET STRING of SIZE 6 with each octet containing
a 0.

In general…
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.4
rptrPortSecurityLockDelAddress mandatory
Setting a value to this object will cause corresponding entry
in the rptrPortSecurityListTable to be deleted. When read
this object returns an OCTET STRING of length 6 with each octet
having the value '0'.
…
OctetStringr/w .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.5
rptrPortSecurityDisableOnViolation mandatory
Designates whether port is disabled if its source address
is violated. A source address violation occurs when a
address is detected which is not in the source address list for
this port. If the port is disabled due to…
Enumerationr/w
Enumerated Values:
1noDisable
2disable
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.6
rptrPortSecurityFullSecEnabled mandatory
A port that is set to full security and is locked will
scramble ALL packets, which are not contained in the expected
address list, including broadcasts and multicasts. A port
that is set to partial security will allo…
Enumerationr/w
Enumerated Values:
1partialSecurity
2fullSecurity
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.7
rptrPortSecuritySecureState mandatory
The secure state of the port. If the port is secure(1), it
can be locked in order to enable security. A nonSecure(2)
port cannot be locked.
Enumeration
Enumerated Values:
1secure
2nonSecure
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.8
rptrPortSecurityForceNonSecure mandatory
The force non-secure state of port. If the port is Forced,
Non-Secure via a value of forceNonSecure(2), it is put into a
Non-Secure state, in which case it cannot be locked. If a port is
not forced noForce(1), then it…
Enumerationr/w
Enumerated Values:
1noForce
2forceNonSecure
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.9
rptrPortSecurityLearnState mandatory
The learn state of the port. This object will only
be applied to a port that is unlocked. If set to learn(1), all
addresses are deleted on the port and learning begins once again.
If it is set to noLearn(2), learnin…
Enumerationr/w
Enumerated Values:
1learn
2noLearn
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.10
rptrPortSecurityLearnMode mandatory
The learn mode of the port. If set to oneTime(1),
the port is capable of learning two addresses and securing
on both destination and source addresses (upon locking port).
If set to continuous(2), all addresses are
init…
Enumerationr/w
Enumerated Values:
1oneTime
2continuous
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.11

rptrPortSecurityListTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.3.9.2 · 1 row entry · 4 columns
Open in standard view 
This table defines a list of all source address locks maintained
for the specified port.
rptrPortSecurityListEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1
An entry containing objects pertaining to source address locks
for a port group.
Indexes
rptrPortSecurityListPortGrpId rptrPortSecurityListPortId rptrPortSecurityListIndex
Column Syntax OID
rptrPortSecurityListPortGrpId mandatory
The port group for which this security list entry pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.1
rptrPortSecurityListPortId mandatory
The port ID for which this source address lock list pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.2
rptrPortSecurityListIndex mandatory
A unique index for the source address entries.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.3
rptrPortSecurityListAddress mandatory
Defines the particular source address that has been locked.
OctetString .1.3.6.1.4.1.52.4.1.1.1.4.3.9.2.1.4

rptrPortAssocTable

table mandatory
.1.3.6.1.4.1.52.4.1.1.1.4.4.1 · 1 row entry · 2 columns
Open in standard view 
This table defines the port association for those switching
MIMs that support this functionality.
rptrPortAssocEntry entry .1.3.6.1.4.1.52.4.1.1.1.4.4.1.1
Describes a particular port association entry.
Indexes
rptrPortAssocBoard
Column Syntax OID
rptrPortAssocBoard mandatory
The board number for which this port association information
pertains.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.1
rptrPortAssocStatus mandatory
This object describes the status of the user selectable port.
On a TPXMIM34 this is port 13 which may either be an EPIM or
default configuration.

A value of defaultPort(1) restores the default configura…
Enumerationr/w
Enumerated Values:
1defaultPort
2otherPort
 .1.3.6.1.4.1.52.4.1.1.1.4.4.1.1.2