RC-OSPF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

rcIpConfOspfTable

table

.1.3.6.1.4.1.2272.1.8.1.2 · 1 row entry · 12 columns

Open in standard view

A table used to maintain OSPF information
for a particular interface.

rcIpConfOspfEntry entry .1.3.6.1.4.1.2272.1.8.1.2.1

Entry containing OSPF information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

rcIpConfOspfIfIndex

Column Syntax OID

rcIpConfOspfIfIndex

An unique value to identify a physical interface
or a logical interface (VLAN).

Integer32

Constraints:
range: 0-6143

.1.3.6.1.4.1.2272.1.8.1.2.1.1

rcIpConfOspfRtrPriority

The priority of this interface. Used in multi-
access networks, this field is used in the
designated router election algorithm. The value 0
signifies that the router is not eligible to become
the designated router on …

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2272.1.8.1.2.1.2

rcIpConfOspfMetric

The metric for this type of service (TOS) on this
interface. The default value of the TOS 0 Metric
is (10^9 / ifSpeed). The value FFFF means 'no route
via this TOS'. A value of 0 means the interface speed
(rcIpConfO…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2272.1.8.1.2.1.3

rcIpConfOspfAuthKey

The Authentication Key. If the Area's
Authorization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets.

Note that unauthenticated …

OctetStringr/w

Constraints:
range: 0-8

.1.3.6.1.4.1.2272.1.8.1.2.1.4

rcIpConfOspfRowStatus

Row status for this entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2272.1.8.1.2.1.5

rcIpConfOspfHelloInterval

The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for all
routers attached to a common network.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2272.1.8.1.2.1.6

rcIpConfOspfRtrDeadInterval

The number of seconds that a router's Hello
packets have not been seen before it's
neighbors declare the router down. This should
be some multiple of the Hello interval. This
value must be the same for all routers at…

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2272.1.8.1.2.1.7

rcIpConfOspfIfAreaId

A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2272.1.8.1.2.1.8

rcIpConfOspfAuthType

The authentication type specified for an interface.
Additional authentication types may be assigned locally.

Enumerationr/w

Enumerated Values:

0	none
1	simplePassword
2	md5
3	sha1
4	sha2

.1.3.6.1.4.1.2272.1.8.1.2.1.9

rcIpConfOspfPollInterval

OSPF NBMA Interface Poll Interval.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2272.1.8.1.2.1.10

rcIpConfOspfIfMtuIgnore

Mtu-ignore flag is for ignoring the mtu checking in
ospf bdb

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.8.1.2.1.11

rcIpConfOspfBfdEnable

Used to enable/disable BFD for OSPF.

RAPID-CITYEnableValuer/w

Textual Convention: RAPID-CITYEnableValue Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2272.1.8.1.2.1.12

rcIpConfOspfAreaTable

table

.1.3.6.1.4.1.2272.1.8.1.7 · 1 row entry · 3 columns

Open in standard view

A table used to maintain OSPF information
for a particular Area.

rcIpConfOspfAreaEntry entry .1.3.6.1.4.1.2272.1.8.1.7.1

Entry containing OSPF Area configuration
information. An entry is automatically created
in this table when an area is configured through
ospfAreaTable in (rfc1253rcc.mib).

Indexes

rcIpConfOspfAreaId

Column Syntax OID

rcIpConfOspfAreaId

An unique value to identify an area. Area ID
0.0.0.0 is used for the OSPF backbone.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2272.1.8.1.7.1.1

rcIpConfOspfAreaImportSummary

The area's support for importing Summary
advertisements into a stub area. This field
should be used only if ospfImportASExtern is
set to FALSE

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2272.1.8.1.7.1.2

rcIpConfOspfAreaActiveIfCount

This variable displays the number of active
interfaces configured in this area. An area
cannot be deleted if this value is > 0.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2272.1.8.1.7.1.3

rcIpConfOspfV2Table

table deprecated

.1.3.6.1.4.1.2272.1.8.1.9 · 1 row entry · 10 columns

Open in standard view

A table used to maintain OSPF information
for a particular interface.

rcIpConfOspfV2Entry entry .1.3.6.1.4.1.2272.1.8.1.9.1

Entry containing OSPF information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

rcIpConfOspfV2IfIndex rcIpConfOspfV2IpAddr

Column Syntax OID

rcIpConfOspfV2IfIndex deprecated

An unique value to identify a physical interface
or a logical interface (VLAN).

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.2272.1.8.1.9.1.1

rcIpConfOspfV2IpAddr deprecated

IpAddress of the IP interface.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2272.1.8.1.9.1.2

rcIpConfOspfV2RtrPriority deprecated

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2272.1.8.1.9.1.3

rcIpConfOspfV2Metric deprecated

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2272.1.8.1.9.1.4

rcIpConfOspfV2AuthKey deprecated

The Authentication Key. If the Area's
Authorization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets. When read,
ospfIfAuthKey always returns an…

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.2272.1.8.1.9.1.5

rcIpConfOspfV2RowStatus deprecated

Row status for this entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2272.1.8.1.9.1.6

rcIpConfOspfV2HelloInterval deprecated

The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for all
routers attached to a common network.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2272.1.8.1.9.1.7

rcIpConfOspfV2RtrDeadInterval deprecated

Integer32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2272.1.8.1.9.1.8

rcIpConfOspfV2IfAreaId deprecated

A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2272.1.8.1.9.1.9

rcIpConfOspfV2AuthType deprecated

The authentication type specified for an interface.
Additional authentication types may be assigned locally.

Enumerationr/w

Enumerated Values:

0	none
1	simplePassword
2	md5

.1.3.6.1.4.1.2272.1.8.1.9.1.10

rcIpConfOspfAreaAggregateTable

table

.1.3.6.1.4.1.2272.1.8.1.10 · 1 row entry · 6 columns

Open in standard view

A table used to maintain OSPF summary route
metric parameter for a particular Area range.

rcIpConfOspfAreaAggregateEntry entry .1.3.6.1.4.1.2272.1.8.1.10.1

Entry containing OSPF summary route metric
parameter for a particular Area range.
An entry is automatically created in this
table when an area range is configured through
ospfAreaAggregateTable in rfc1850rcc.mib

Indexes

rcIpConfOspfAreaAggregateAreaID rcIpConfOspfAreaAggregateLsdbType rcIpConfOspfAreaAggregateNet rcIpConfOspfAreaAggregateMask

Column Syntax OID

rcIpConfOspfAreaAggregateAreaID

The Area the Address Aggregate is to be found
within.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2272.1.8.1.10.1.1

rcIpConfOspfAreaAggregateLsdbType

The type of the Address Aggregate. This field
specifies the Lsdb type that this Address Ag-
gregate applies to.

Enumeration

Enumerated Values:

3	summaryLink
7	nssaExternalLink

.1.3.6.1.4.1.2272.1.8.1.10.1.2

rcIpConfOspfAreaAggregateNet

The IP Address of the Net or Subnet indicated
by the range.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2272.1.8.1.10.1.3

rcIpConfOspfAreaAggregateMask

The Subnet Mask that pertains to the Net or
Subnet.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2272.1.8.1.10.1.4

rcIpConfOspfAreaAggregateAdvertiseMetric

Used to specify a metric for a Summary LSA (type
3) generated by OSPF through an area range.
If this metric is set to 0, OSPF uses the cost
to the farthest point in the networks being
summarized as the metric.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2272.1.8.1.10.1.5

rcIpConfOspfAreaAggregateEffect

Subnets subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
vertiseMatching), or result in the subnet's not
being advertised at all outside the area.

Enumerationr/w

Enumerated Values:

1	advertiseMatching
2	doNotAdvertiseMatching
3	advertiseDoNotAggregate

.1.3.6.1.4.1.2272.1.8.1.10.1.6

rcStatOspfIfTable

table

.1.3.6.1.4.1.2272.1.12.5 · 1 row entry · 20 columns

Open in standard view

A table used to store OSPF interface
statistics.

rcStatOspfIfEntry entry .1.3.6.1.4.1.2272.1.12.5.1

Ospf interface statistics

Indexes

rcStatOspfIfIndex

Column Syntax OID

rcStatOspfIfIndex

An unique value that is used to identify a
physical interface.

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.2272.1.12.5.1.1

rcStatOspfIfRxHellos

Used to indicate the number hello packets
received by this interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32