RC-IP-POLICY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
23
Rows
23
Columns
219

rcIpPolicyAddrTable

table deprecated
.1.3.6.1.4.1.2272.1.8.11.2 · 1 row entry · 5 columns
Open in standard view 
A table used to store different types list entries.
Each row in the table contains a list entry that is
used by a set of announce policies.
rcIpPolicyAddrEntry entry .1.3.6.1.4.1.2272.1.8.11.2.1
Route entry attributes.
Indexes
rcIpPolicyAddrIpAddr
Column Syntax OID
rcIpPolicyAddrIpAddr deprecated
The network address for this type of list entry. This
value is required for all types of lists.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.11.2.1.1
rcIpPolicyAddrId deprecated
Identifier of this entry. Used internally to identify
this entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.11.2.1.2
rcIpPolicyAddrAddrListIdListSize deprecated
Used to indicate the number of id(s) in the
rcIpPolicyAddrListIdList variable.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.8.11.2.1.3
rcIpPolicyAddrAddrListIdList deprecated
Used to indicate zero or more rcIpPolicyAddrListEntry(s)
that are referring to this entry. Each list-id identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to ze…
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2272.1.8.11.2.1.4
rcIpPolicyAddrRowStatus deprecated
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.11.2.1.5

rcIpPolicyNetTable

table deprecated
.1.3.6.1.4.1.2272.1.8.11.4 · 1 row entry · 6 columns
Open in standard view 
A table used to store different types list entries.
Each row in the table contains a list entry that is
used by a set of announce policies.
rcIpPolicyNetEntry entry .1.3.6.1.4.1.2272.1.8.11.4.1
Route entry attributes.
Indexes
rcIpPolicyNetAddr rcIpPolicyNetMask
Column Syntax OID
rcIpPolicyNetAddr deprecated
The network address for this type of list entry. This
value is required for all types of lists.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.11.4.1.1
rcIpPolicyNetMask deprecated
The route mask for this type of list entry. This
value is meaningful only if rcIpPolicyNetEntry
is equal to exactNet(1), rangeNet(2), advertiseNet(3).
For other types it should have the value 0.0.0.0.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.11.4.1.2
rcIpPolicyNetId deprecated
Used internally to recognize this entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.11.4.1.3
rcIpPolicyNetNetListIdListSize deprecated
Used to indicate the number of id(s) in the
rcIpPolicyNetListIdList variable.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.8.11.4.1.4
rcIpPolicyNetNetListIdList deprecated
Used to indicate zero or more rcIpPolicyNetListEntry(s)
that are referring to this entry. Each list-id identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to ze…
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2272.1.8.11.4.1.5
rcIpPolicyNetRowStatus deprecated
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.11.4.1.6

rcIpPolicyAddrListTable

table deprecated
.1.3.6.1.4.1.2272.1.8.11.6 · 1 row entry · 7 columns
Open in standard view 
A table used to group rcIpPolicyAddrEntry(s) 
into a list.
rcIpPolicyAddrListEntry entry .1.3.6.1.4.1.2272.1.8.11.6.1
Route entry attributes.
Indexes
rcIpPolicyAddrListId
Column Syntax OID
rcIpPolicyAddrListId deprecated
A value that uniquely identifies this list of
rcIpPolicyAddrListEntry.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.8.11.6.1.1
rcIpPolicyAddrListName deprecated
An administratively-assigned name for this list.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.8.11.6.1.3
rcIpPolicyAddrListIdListSize deprecated
Used to indicate the number of rcIpPolicyAddrNetEntry
id(s) in the rcIpPolicyAddrListIdList variable.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.8.11.6.1.4
rcIpPolicyAddrListIdList deprecated
Used to indicate zero or more AddrListId that
are associated to this list. Each AddrList identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2272.1.8.11.6.1.5
rcIpPolicyAddrListPolicyIdListSize deprecated
Used to indicate the number of policy id(s) in the
Policy Id list. That are referring to this list.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.8.11.6.1.6
rcIpPolicyAddrListPolicyIdList deprecated
Used to indicate zero or more policies that
are referring to this entry. Each policy identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2272.1.8.11.6.1.7
rcIpPolicyAddrListRowStatus deprecated
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.11.6.1.8

rcIpPolicyRipAnnounceTable

table deprecated
.1.3.6.1.4.1.2272.1.8.11.8 · 1 row entry · 16 columns
Open in standard view 
A table used to store set of announce policies 
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.
rcIpPolicyRipAnnounceEntry entry .1.3.6.1.4.1.2272.1.8.11.8.1
Entry containing configuration information for a
particular announce policy.
Indexes
rcIpPolicyRipAnnounceId
Column Syntax OID
rcIpPolicyRipAnnounceId deprecated
A value that uniquely identifies the policy
associated with this entry.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.8.11.8.1.1
rcIpPolicyRipAnnounceName deprecated
An administratively-assigned name for this policy.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.8.11.8.1.2
rcIpPolicyRipAnnounceEnable deprecated
It indicates whether this policy is enabled or not.
The policy should be applied only if it is set to 'true'.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.11.8.1.3
rcIpPolicyRipAnnounceExactNetListId deprecated
Used to indicate the number of 'exact' type entries
that are configured for this policy.

An entry with type 'exactNet' or 'rangeNet' represents
the network list. This indicates which networks will
match…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.8.1.4
rcIpPolicyRipAnnounceRangeNetListId deprecated
Used to indicate zero or more 'range' network entries
that are associated with this policy.

An entry with a 'range' type means to match any network
number that falls in the range indicated by the add…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.8.1.5
rcIpPolicyRipAnnounceRipGatewayListId deprecated
Used to identify the RIP-gatewayList in the list
that are associated with this policy.

This field has meaning only for RIP sourced routes and
if RIP is included as a RouteSource.
The list contains one…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.8.1.6
rcIpPolicyRipAnnounceRipInterfaceListId deprecated
Used to indicate the number of entries in the
ripInterfaceIdList that are configured for this policy.

This field has meaning only for RIP sourced routes and
if RIP is included as a RouteSource. The list …
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.8.1.7
rcIpPolicyRipAnnounceOspfRouterListId deprecated
Used to indicate the number of entries in the
OspfRouteIds that are configured for this policy.

This field has meaning only for OSPF sourced routes and
if OSPF is included as a RouteSource. The list cont…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.8.1.8
rcIpPolicyRipAnnounceAnnounceInterfaceListId deprecated
Used to indicate the number of entries in the
AnnounceInterfaceids that are configured for this policy.

The list contains one or more outbound interface
addresses. If the outbound interface address in t…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.8.1.9
rcIpPolicyRipAnnouncePrecedence deprecated
Is used while comparing this policy rule with other
policy that a given route may match. A rule with a
higher precedence value will be chosen over one with
a smaller value. In the case of a tie, the PolicyId is
use…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.11.8.1.10
rcIpPolicyRipAnnounceRouteSource deprecated
Is represented as bitset to indicate route sources.
It can contain one or more route sources. If the route
source is in this bit map, then a route from that source
that meets the other criteria of this policy will ma…
Enumerationr/w
Enumerated Values:
1direct
2static
4rip
8ospf
15any
 .1.3.6.1.4.1.2272.1.8.11.8.1.11
rcIpPolicyRipAnnounceAdvertiseNetListId deprecated
Used to indicate the number of entries in the
AdvertiseNetList that are configured for this policy.

This has meaning only if the Action is set to 'announce'.
It is useful to send or advertise networks tha…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.8.1.12
rcIpPolicyRipAnnounceAction deprecated
It indicates whether the route should be announced
or not.
Enumerationr/w
Enumerated Values:
1announce
2ignore
 .1.3.6.1.4.1.2272.1.8.11.8.1.13
rcIpPolicyRipAnnounceOspfRouteType deprecated
Ospf Route type. It applies to OSPF sourced routes only.
'type1' means to apply this policy to only type1 OSPF
external routes. 'type2' means to apply this policy to
only type2 OSPF external routes. 'internal' means '…
Enumerationr/w
Enumerated Values:
1type1
2type2
3external
4internal
5any
 .1.3.6.1.4.1.2272.1.8.11.8.1.14
rcIpPolicyRipAnnounceRipMetric deprecated
RIP metric. The value is meaningful only if the action
is set to 'announce'. This is optional export metric
to use when advertising a route that matches this policy.
If set to zero, the routing table metric calculated…
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.8.11.8.1.15
rcIpPolicyRipAnnounceRowStatus deprecated
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.11.8.1.16

rcIpPolicyOspfAnnounceTable

table deprecated
.1.3.6.1.4.1.2272.1.8.11.10 · 1 row entry · 14 columns
Open in standard view 
A table used to store set of announce policies 
configured for OSPF routing protocol. The Number
of entries is given by rcIpPolicyNumOspfPolicies.
rcIpPolicyOspfAnnounceEntry entry .1.3.6.1.4.1.2272.1.8.11.10.1
Entry containing configuration information for a
particular announce policy.
Indexes
rcIpPolicyOspfAnnounceId
Column Syntax OID
rcIpPolicyOspfAnnounceId deprecated
A value that uniquely identifies the policy
associated with this entry.
Integer32
Constraints:
range: 2001-3000
 .1.3.6.1.4.1.2272.1.8.11.10.1.1
rcIpPolicyOspfAnnounceName deprecated
An administratively-assigned name for this policy.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.8.11.10.1.2
rcIpPolicyOspfAnnounceEnable deprecated
It indicates whether this policy is enabled or not.
The policy should be applied only if it is set to
'true'.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.11.10.1.3
rcIpPolicyOspfAnnounceExactNetListId deprecated
Used to indicate the number of 'exact' type entries
that are configured for this policy.

An entry with type 'exactNet' or 'rangeNet' represents
the network list. This indicates which networks will
match …
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.10.1.4
rcIpPolicyOspfAnnounceRangeNetListId deprecated
Used to indicate zero or more 'range' network entries
that are associated with this policy.

An entry with a 'range' type means to match any network
number that falls in the range indicated by the addr &
m…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.10.1.5
rcIpPolicyOspfAnnounceRipGatewayListId deprecated
Used to identify the RIP-gatewayList in the list
that are associated with this policy.

This field has meaning only for RIP sourced routes and
if RIP is included as a RouteSource.
The list contains one or …
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.10.1.6
rcIpPolicyOspfAnnounceRipInterfaceListId deprecated
Used to indicate the number of entries in the
ripInterfaceIdList that are configured for this policy.

This field has meaning only for RIP sourced routes and
if RIP is included as a RouteSource. The list c…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.10.1.7
rcIpPolicyOspfAnnouncePrecedence deprecated
Is used while comparing this policy rule with other
policy that a given route may match. A rule with a
higher precedence value will be chosen over one with
a smaller value. In the case of a tie, the PolicyId is
use…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.11.10.1.8
rcIpPolicyOspfAnnounceRouteSource deprecated
Is represented as bit map to indicate route sources.
It can contain one or more route sources. If the route
source is in this bit map, then a route from that source
that meets the other criteria of this policy will m…
Enumerationr/w
Enumerated Values:
1direct
2static
4rip
7any
 .1.3.6.1.4.1.2272.1.8.11.10.1.9
rcIpPolicyOspfAnnounceAdvertiseNetListId deprecated
Used to indicate the number of entries in the
AdvertiseNetList that are configured for this policy.

This has meaning only if the Action is set to 'announce'.
It is useful to send or advertise networks tha…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.10.1.10
rcIpPolicyOspfAnnounceAction deprecated
It indicates whether the route should be announced
or not.
Enumerationr/w
Enumerated Values:
1announce
2ignore
 .1.3.6.1.4.1.2272.1.8.11.10.1.11
rcIpPolicyOspfAnnounceExtMetricType deprecated
Ospf External metric type. It is used to indicate
what type of the external metric it is. 'type1' means to
the cost is 'internal ospf cost + ExtMetric'.
'type2' means the ospf-metric is equal to 'type2'.
Enumerationr/w
Enumerated Values:
1type1
2type2
 .1.3.6.1.4.1.2272.1.8.11.10.1.12
rcIpPolicyOspfAnnounceExtMetric deprecated
OSPF External metric. The value is meaningful only if
the action is set to 'announce'. This is optional export
metric to use when advertising a route that matches this
policy. Value '0' is used to indicate that route…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.11.10.1.13
rcIpPolicyOspfAnnounceRowStatus deprecated
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.11.10.1.14

rcIpPolicyRipAcceptTable

table deprecated
.1.3.6.1.4.1.2272.1.8.11.12 · 1 row entry · 12 columns
Open in standard view 
A table used to store set of accept policies 
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.
rcIpPolicyRipAcceptEntry entry .1.3.6.1.4.1.2272.1.8.11.12.1
Entry containing configuration information for a
particular accept policy.
Indexes
rcIpPolicyRipAcceptId
Column Syntax OID
rcIpPolicyRipAcceptId deprecated
A value that uniquely identifies the policy
associated with this entry.
Integer32
Constraints:
range: 4001-5000
 .1.3.6.1.4.1.2272.1.8.11.12.1.1
rcIpPolicyRipAcceptName deprecated
An administratively-assigned name for this policy.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.8.11.12.1.2
rcIpPolicyRipAcceptEnable deprecated
It indicates whether this policy is enabled or not.
The policy should be applied only if it is set to 'true'.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.11.12.1.3
rcIpPolicyRipAcceptExactNetListId deprecated
Used to indicate the number of 'exact' type entries
that are configured for this policy.

An entry with type 'exactNet' or 'rangeNet' represents
the network list. This indicates which networks will
match…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.12.1.4
rcIpPolicyRipAcceptRangeNetListId deprecated
Used to indicate zero or more 'range' network entries
that are associated with this policy.

An entry with a 'range' type means to match any network
number that falls in the range indicated by the add…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.12.1.5
rcIpPolicyRipAcceptRipGatewayListId deprecated
Used to identify the RIP-gatewayList in the
PolicyListTable that iares associated with this
policy. The list contains the addresses of one or more
routers that could send RIP updates to this router.
If a router addre…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.12.1.6
rcIpPolicyRipAcceptRipInterfaceListId deprecated
Used to indicate ListId defined for RipInterfaceList
in the rcIpPolicyListTable that is assiciated
with this policy.
The list contains the addresses of one or more interfaces
on this router. If an interface address i…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.12.1.7
rcIpPolicyRipAcceptPrecedence deprecated
Is used while comparing this policy rule with other
policy that a given route may match. A rule with a
higher precedence value will be chosen over one with
a smaller value. In the case of a tie, the PolicyId is
use…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.11.12.1.8
rcIpPolicyRipAcceptAction deprecated
It indicates whether the route should be acceptd
or not.
Enumerationr/w
Enumerated Values:
1accept
2ignore
 .1.3.6.1.4.1.2272.1.8.11.12.1.9
rcIpPolicyRipAcceptInjectNetListId deprecated
Used to indicate the ListId of the InjectNetList
in the rcIpPolicyListTable entry that is assiciated
with for this policy. If teh action is 'accept' and if it
is desired to insert networks into the routing table that
di…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.12.1.10
rcIpPolicyRipAcceptApplyMask deprecated
If the 'action' is set to 'accept' and the actual
received network will be considered, this is an
optional IP address mask that will be applied to the
network number from the RIP update. This is used to
override the …
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.11.12.1.11
rcIpPolicyRipAcceptRowStatus deprecated
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.11.12.1.12

rcIpPolicyOspfAcceptTable

table deprecated
.1.3.6.1.4.1.2272.1.8.11.14 · 1 row entry · 10 columns
Open in standard view 
A table used to store set of accept policies 
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.
rcIpPolicyOspfAcceptEntry entry .1.3.6.1.4.1.2272.1.8.11.14.1
Entry containing configuration information for a
particular accept policy.
Indexes
rcIpPolicyOspfAcceptId
Column Syntax OID
rcIpPolicyOspfAcceptId deprecated
A value that uniquely identifies the policy
associated with this entry.
Integer32
Constraints:
range: 6001-7000
 .1.3.6.1.4.1.2272.1.8.11.14.1.1
rcIpPolicyOspfAcceptName deprecated
An administratively-assigned name for this policy.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.8.11.14.1.2
rcIpPolicyOspfAcceptEnable deprecated
It indicates whether this policy is enabled or not.
The policy should be applied only if it is set to 'true'.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.11.14.1.3
rcIpPolicyOspfAcceptExactNetListId deprecated
Used to indicate the number of 'exact' type entries
that are configured for this policy.

An entry with type 'exactNet' or 'rangeNet' represents
the network list. This indicates which networks will
match…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.14.1.4
rcIpPolicyOspfAcceptRangeNetListId deprecated
Used to indicate zero or more 'range' network entries
that are associated with this policy.

An entry with a 'range' type means to match any network
number that falls in the range indicated by the add…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.14.1.5
rcIpPolicyOspfAcceptPrecedence deprecated
Is used while comparing this policy rule with other
policy that a given route may match. A rule with a
higher precedence value will be chosen over one with
a smaller value. In the case of a tie, the PolicyId is
use…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.11.14.1.6
rcIpPolicyOspfAcceptAction deprecated
It indicates whether the route should be acceptd
or not.
Enumerationr/w
Enumerated Values:
1accept
2ignore
 .1.3.6.1.4.1.2272.1.8.11.14.1.7
rcIpPolicyOspfAcceptInjectNetListId deprecated
Used to indicate the ListId of the InjectNetList
in the rcIpPolicyListTable entry that is assiciated
with for this policy. If teh action is 'accept' and if it
is desired to insert networks into the routing table that
di…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2272.1.8.11.14.1.8
rcIpPolicyOspfAcceptExtType deprecated
Used to indicate the ospf external type. This
parameter describes which types of OSPF ASE routes
match this policy.
'any' means 'match either ASE type 1 or 2'.
'type1' means 'match any external type 1'.
'type2' means…
Enumerationr/w
Enumerated Values:
1type1
2type2
3any
 .1.3.6.1.4.1.2272.1.8.11.14.1.9
rcIpPolicyOspfAcceptRowStatus deprecated
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.11.14.1.10

rcIpPolicyNetListTable

table deprecated
.1.3.6.1.4.1.2272.1.8.11.16 · 1 row entry · 7 columns
Open in standard view 
A table used to group rcIpPolicyAddrEntry(s) 
into a list.
rcIpPolicyNetListEntry entry .1.3.6.1.4.1.2272.1.8.11.16.1
Route entry attributes.
Indexes
rcIpPolicyNetListId
Column Syntax OID
rcIpPolicyNetListId deprecated
A value that uniquely identifies this list of
rcIpPolicyNetListEntry.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2272.1.8.11.16.1.1
rcIpPolicyNetListName deprecated
An administratively-assigned name for this list.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2272.1.8.11.16.1.3
rcIpPolicyNetListIdListSize deprecated
Used to indicate the number of rcIpPolicyNetEntry
id(s) in the rcIpPolicyNetListIdList variable.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.8.11.16.1.4
rcIpPolicyNetListIdList deprecated
Used to indicate zero or more NetListId that
are associated to this list. Each NetList identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2272.1.8.11.16.1.5
rcIpPolicyNetListPolicyIdListSize deprecated
Used to indicate the number of policy id(s) in the
Policy Id list. That are referring to this list.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.8.11.16.1.6
rcIpPolicyNetListPolicyIdList deprecated
Used to indicate zero or more policies that
are referring to this entry. Each policy identifier
is stored as two bytes in this array starting from
offset zero. Any unused bytes should be set to zero.
OctetString
Constraints:
range: 256-256
 .1.3.6.1.4.1.2272.1.8.11.16.1.7
rcIpPolicyNetListRowStatus deprecated
Row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.11.16.1.8

rcIpAsPathAccessListTable

table
.1.3.6.1.4.1.2272.1.8.100.2 · 1 row entry · 5 columns
Open in standard view 
IP As Path Access List table
rcIpAsPathAccessListEntry entry .1.3.6.1.4.1.2272.1.8.100.2.1
An entry of Ip As Path Access List Table.
Indexes
rcIpAsPathAccessListId rcIpAsPathAccessListMemberId
Column Syntax OID
rcIpAsPathAccessListId
Path Access List entry Id.
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2272.1.8.100.2.1.1
rcIpAsPathAccessListMemberId
frq. at which hello sent.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.2.1.2
rcIpAsPathAccessListMode
Path Access List Mode, permit or deny.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2272.1.8.100.2.1.3
rcIpAsPathAccessListAsRegularExpression
IP Path Access List Regular Expression
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2272.1.8.100.2.1.4
rcIpAsPathAccessListRowStatus
Table row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.2.1.5

rcIpCommunityAccessListTable

table
.1.3.6.1.4.1.2272.1.8.100.4 · 1 row entry · 5 columns
Open in standard view 
IP CommunityAccess List table
rcIpCommunityAccessListEntry entry .1.3.6.1.4.1.2272.1.8.100.4.1
An entry of Ip CommunityAccess List Table.
Indexes
rcIpCommunityAccessListId rcIpCommunityAccessListMemberId
Column Syntax OID
rcIpCommunityAccessListId
IP CommunityAccess entry List Id
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2272.1.8.100.4.1.1
rcIpCommunityAccessListMemberId
frq. at which hello sent.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.4.1.2
rcIpCommunityAccessListMode
IP Community Access List Mode, permit or deny.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2272.1.8.100.4.1.3
rcIpCommunityAccessListCommunity
IP Community Access List Community string.
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.2272.1.8.100.4.1.4
rcIpCommunityAccessListRowStatus
IP Community Access Table Row Status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.4.1.5

rcIpAccessListTable

table
.1.3.6.1.4.1.2272.1.8.100.6 · 1 row entry · 6 columns
Open in standard view 
IP Access List table
rcIpAccessListEntry entry .1.3.6.1.4.1.2272.1.8.100.6.1
An entry of Ip Access List Table.
Indexes
rcIpAccessListId rcIpAccessListMode rcIpAccessListNetwork rcIpAccessListNetworkMask
Column Syntax OID
rcIpAccessListId Integer32
Constraints:
range: 1-99
 .1.3.6.1.4.1.2272.1.8.100.6.1.1
rcIpAccessListMode Enumeration
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2272.1.8.100.6.1.2
rcIpAccessListNetwork SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.6.1.3
rcIpAccessListNetworkMask SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.6.1.4
rcIpAccessListName SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.6.1.5
rcIpAccessListRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.6.1.6

rcIpExtendedAccessListTable

table
.1.3.6.1.4.1.2272.1.8.100.8 · 1 row entry · 8 columns
Open in standard view 
IP Extended Access List table
rcIpExtendedAccessListEntry entry .1.3.6.1.4.1.2272.1.8.100.8.1
An entry of Ip Extended Access List Table.
Indexes
rcIpExtendedAccessListId rcIpExtendedAccessListMode rcIpExtendedAccessListNetwork rcIpExtendedAccessListNetworkWildCard rcIpExtendedAccessListNetworkMask rcIpExtendedAccessListNetworkMaskWildCard
Column Syntax OID
rcIpExtendedAccessListId Integer32
Constraints:
range: 100-199
 .1.3.6.1.4.1.2272.1.8.100.8.1.1
rcIpExtendedAccessListMode Enumeration
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2272.1.8.100.8.1.2
rcIpExtendedAccessListNetwork SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.8.1.3
rcIpExtendedAccessListNetworkWildCard SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.8.1.4
rcIpExtendedAccessListNetworkMask SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.8.1.5
rcIpExtendedAccessListNetworkMaskWildCard SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.8.1.6
rcIpExtendedAccessListName SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.8.1.7
rcIpExtendedAccessListRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.8.1.8

rcIpPrefixListTable

table
.1.3.6.1.4.1.2272.1.8.100.10 · 1 row entry · 7 columns
Open in standard view 
IP Prefix List table
rcIpPrefixListEntry entry .1.3.6.1.4.1.2272.1.8.100.10.1
An entry of Ip Prefix List Table.
Indexes
rcIpPrefixListId rcIpPrefixListPrefix rcIpPrefixListPrefixMaskLen
Column Syntax OID
rcIpPrefixListId
ListId
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.10.1.1
rcIpPrefixListPrefix
Is a member of a specific prefix list.
Adding the prefix to the given prefix list
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.10.1.2
rcIpPrefixListPrefixMaskLen
prefix mask length
Integer32
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.100.10.1.3
rcIpPrefixListMaskLenFrom
used with mask len
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.100.10.1.4
rcIpPrefixListMaskLenUpto
used with mask len
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.8.100.10.1.5
rcIpPrefixListName
list name
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.8.100.10.1.6
rcIpPrefixListRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.10.1.7

rcIpRoutePolicyTable

table
.1.3.6.1.4.1.2272.1.8.100.13 · 1 row entry · 48 columns
Open in standard view 
IP Route Map table
rcIpRoutePolicyEntry entry .1.3.6.1.4.1.2272.1.8.100.13.1
An entry of Ip Route Map Table.
Indexes
rcIpRoutePolicyId rcIpRoutePolicySequenceNumber
Column Syntax OID
rcIpRoutePolicyId
Index used to identify a group of policies in
the route policy tableRoute map id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.1
rcIpRoutePolicySequenceNumber
second index used to identify a specific policy
with in the route policy group (grouped by Id).
This field allows users to specify different
MATCH, SET parameters and an action.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.2
rcIpRoutePolicyName
Is used to group a set of policies with different
sequence number. Id & Name have one-on-one
relationship. Different policy groups can
contain same sequence number, whereas with in
a gro…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.8.100.13.1.3
rcIpRoutePolicyEnable
Value specified here indicate whether
this policy is enabled or not. If
disabled policy sould not be used.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2272.1.8.100.13.1.4
rcIpRoutePolicyMode
specifies the action to be taken when this
policy is selected for a specific route.
This can be permit or deny or continue.
Permit indicates allow the route, deny indicates
ignore the route. Continue means continue
chec…
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.2272.1.8.100.13.1.5
rcIpRoutePolicyMatchProtocol
Match protocol. Used for RIP and DVMRP announce policy only.
Value is one of multiple (logical 'OR) of the following values:
direct(1): enables direct match-protocol
static(2): enables static match-protocol
rip(4): ena…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.100.13.1.6
rcIpRoutePolicyMatchAsPath
Applicable to BGP protocol only. Match the BGP
autonomous system path. This will override the
BGP neighbor filter list info.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.13.1.7
rcIpRoutePolicyMatchCommunity
Applicable to BGP protocol only. Filter
incoming/outgoing updates based on communities.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.13.1.8
rcIpRoutePolicyMatchCommunityExact
If enabled indicates the match has be an exact
(i.e., all of the communities specified in the
path has to be matched).
RAPID-CITYEnableValuer/w
Textual Convention: RAPID-CITYEnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.13.1.9
rcIpRoutePolicyMatchNetwork
can specify one or more prefix list name or id(s)
RAPID-CITYRcLongDisplayStringr/w
Textual Convention: RAPID-CITYRcLongDisplayString OctetString
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.8.100.13.1.10
rcIpRoutePolicyMatchIpRouteSource
In case of Rip routes this is equivalent to
RipInterface. In case of DVMRP routes this is
equivalent to DVMRP gateway. Can specify one
or more prefix list name(s) or id(s) seperated by comma.
RAPID-CITYRcLongDisplayStringr/w
Textual Convention: RAPID-CITYRcLongDisplayString OctetString
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.8.100.13.1.11
rcIpRoutePolicyMatchNextHop
In case of Rip routes this is equivalent to
RipInterface. In case of DVMRP routes this is
equivalent to DVMRP gateway. Can specify one
or more prefix list name(s) or id(s) seperated by comma.
RAPID-CITYRcLongDisplayStringr/w
Textual Convention: RAPID-CITYRcLongDisplayString OctetString
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.8.100.13.1.12
rcIpRoutePolicyMatchInterface
Match received interface. Only for rip routes.
Ignored in all other cases.
RAPID-CITYRcLongDisplayStringr/w
Textual Convention: RAPID-CITYRcLongDisplayString OctetString
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.8.100.13.1.13
rcIpRoutePolicyMatchRouteType
For BGP this choice refers to locally generated
routes external routes learned via ebgp nbr. For
OSPF internal refers to intra and inter area
routes (belongs to local autonomous system).
External (type1|type2) refers to…
Enumerationr/w
Enumerated Values:
0any
1local
2internal
3external
4externaltype1
5externaltype2
6level1
7level2
 .1.3.6.1.4.1.2272.1.8.100.13.1.14
rcIpRoutePolicyMatchMetric
Match mec field in the incoming advertisement.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.13.1.15
rcIpRoutePolicyMatchTag
specifies a list of tag(s), that will be used
during the match criteria process.contains one
or more tag values..
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.13.1.16
rcIpRoutePolicySetRoutePreference
if non-zero specifies the route preference
value to be assigned to the routes that applies
this policy.contains one or more tag values..
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.100.13.1.17
rcIpRoutePolicySetAsPath
The AS path vaule to be used whether the
SetAsPathMode is Tag or Prepend.as-path string..
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.13.1.18
rcIpRoutePolicySetAsPathMode
It can be either tag or prepend tag.
applicable only while redistributing routes to
BGP.Converts the tag of a route into AS path.
Enumerationr/w
Enumerated Values:
1tag
2prepend
 .1.3.6.1.4.1.2272.1.8.100.13.1.19
rcIpRoutePolicySetAutomaticTag RAPID-CITYEnableValuer/w
Textual Convention: RAPID-CITYEnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.13.1.20
rcIpRoutePolicySetCommunityNumber
this value can be a number (1..42949672000)
or no-export or no-advertise. Applicable to
BGP advertisments.community number.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.13.1.21
rcIpRoutePolicySetCommunityMode
this value can be either append or none
unchanged - keep the community attribute in the
route path as it is.
none - remove the community in the route path
additive - adds the community-number specified
…
Enumerationr/w
Enumerated Values:
0unchanged
1none
2append
 .1.3.6.1.4.1.2272.1.8.100.13.1.22
rcIpRoutePolicySetMetricTypeInternal
Indicates to set the MED value for routes
advertised to ebgp nbrs to the IGP metric value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.23
rcIpRoutePolicySetMetric
Value of the metric to be used while sending an
update for the routes that match the matching
criteria in this route policy.
Default - 0 indicates the internal value defined
for protocol
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.13.1.24
rcIpRoutePolicySetMetricType
Metric type for the routes to be imported into
OSPF routing protocol, which passed the matching
criteria configured in this route policy.
Enumerationr/w
Enumerated Values:
1type1
2type2
3internal
4external
 .1.3.6.1.4.1.2272.1.8.100.13.1.25
rcIpRoutePolicySetNextHop
IpAddress of the next hop router. Ignored for
DVMRP routes.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.13.1.26
rcIpRoutePolicySetOrigin
igp/egp/incomplete Applicable to BGP protocol
only. If not set uses the route origin from
the Ip routing table (protocol).
Enumerationr/w
Enumerated Values:
0unchanged
1igp
2egp
3incomplete
 .1.3.6.1.4.1.2272.1.8.100.13.1.27
rcIpRoutePolicySetLocalPref
this value will be used during route decision
process in the BGP protocol. Applicable to BGP
only.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.28
rcIpRoutePolicySetOriginEgpAs
indicates the Remote autonomous sys number.
Applicable to BGP only.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.29
rcIpRoutePolicySetTag
Value to be used for setting tag of the
destination routing protocol. If not specified
forward the tag value in the source routing
protocol. Value 0 indicates not set
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.30
rcIpRoutePolicySetWeight
Should be using with match as-path condition.
Weight value for the routing table. For BGP
this value will override the weight configured
through NetworkTableEntry or FilterListWeight or
NeighborWeight. Used for BGP only…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.31
rcIpRoutePolicySetInjectNetList
specifies the prefix list to be used either
for injecting the routes into the routing
table or to include the networks in the
advertisement. Ignored for DVMRP.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.13.1.32
rcIpRoutePolicyRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.13.1.33
rcIpRoutePolicySetMask
Set Mask Ip Address
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.13.1.34
rcIpRoutePolicyNssaPbit
Set/Reset P bit in specified type 7 LSA.
By default P bit is always set in case user
set it to disable state for particular route
policy than all type 7 LSAs associated with
that route policy will have P bit cleared,
wi…
RAPID-CITYEnableValuer/w
Textual Convention: RAPID-CITYEnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.13.1.35
rcIpRoutePolicyMatchVrf
An array used to identify which source VRFs have leaked
routes to the local VRF.
OctetStringr/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2272.1.8.100.13.1.36
rcIpRoutePolicyMatchExtCommunity
Filter incoming/outgoing updates based on communities
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.13.1.37
rcIpRoutePolicySetExtCommunity
Set Extended-community string.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.13.1.38
rcIpRoutePolicySetExtCommunityMode
This value can be either append, unchanged or overwrite.
append - extended community attributes configured on the route policy
are appended to the attributes already existing on the route.
unchanged - extended communi…
Enumerationr/w
Enumerated Values:
0append
1unchanged
2overwrite
 .1.3.6.1.4.1.2272.1.8.100.13.1.39
rcIpRoutePolicyMatchLocalPref
Match Local Preference value.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.13.1.40
rcIpRoutePolicyMatchIpRouteDest
to match route destination, one can specify one
or more prefix list name(s) or id(s) separated by comma.
RAPID-CITYRcLongDisplayStringr/w
Textual Convention: RAPID-CITYRcLongDisplayString OctetString
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2272.1.8.100.13.1.41
rcIpRoutePolicyMatchExtendedPref
To associate extended ACL(access control list) with the route policy.
User can associate one or multiple extended ACLs.
OctetStringr/w
Constraints:
range: 1-1027
 .1.3.6.1.4.1.2272.1.8.100.13.1.42
rcIpRoutePolicyIpv6SetNextHop
Address of the ipv6 next hop router. Ignored for
DVMRP routes.
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.8.100.13.1.43
rcIpRoutePolicyMatchMetricTypeIsis
Match metric type field in the incoming ISIS
routes in accept policy.
Enumerationr/w
Enumerated Values:
1any
2internal
3external
 .1.3.6.1.4.1.2272.1.8.100.13.1.44
rcIpRoutePolicySetMetricTypeIsis
Set Metric type ISIS.
Enumerationr/w
Enumerated Values:
1none
2internal
3external
 .1.3.6.1.4.1.2272.1.8.100.13.1.45
rcIpRoutePolicySetMetricTypeBgp
Set Metric type BGP.
Enumerationr/w
Enumerated Values:
1none
2liveMetric
 .1.3.6.1.4.1.2272.1.8.100.13.1.46
rcIpRoutePolicyMatchIpMcastGroup
To match multicast destination group. Can specify one
or more prefix list name(s) seperated by comma.
OctetStringr/w
Constraints:
range: 0-259
 .1.3.6.1.4.1.2272.1.8.100.13.1.47
rcIpRoutePolicyMatchIpMcastSource
To match multicast stream source. Can specify one
or more prefix list name(s) separated by comma.
OctetStringr/w
Constraints:
range: 0-259
 .1.3.6.1.4.1.2272.1.8.100.13.1.48

rcIpRedistributeTable

table
.1.3.6.1.4.1.2272.1.8.100.16 · 1 row entry · 14 columns
Open in standard view 
IP Redistribute table
rcIpRedistributeEntry entry .1.3.6.1.4.1.2272.1.8.100.16.1
An entry of Ip Redistribute Table.
Indexes
rcIpRedistributeProtocol rcIpRedistributeRouteSource
Column Syntax OID
rcIpRedistributeProtocol
Protocol is any one of the dynamic routing
protocol, which is interested in receiving
the external routing info.
Enumeration
Enumerated Values:
1ospf
2bgp
3isis
4ospfv3
5vrf-ext
6ripng
 .1.3.6.1.4.1.2272.1.8.100.16.1.1
rcIpRedistributeRouteSource
equivalent to the owner field in the routing
table. This field indicates that the protocol
is interested in knowing/not-knowing the routes
learned from this source.
Enumeration
Enumerated Values:
1direct
2static
3rip
4ospf
5bgp
6isis
7ripng
 .1.3.6.1.4.1.2272.1.8.100.16.1.2
rcIpRedistributeEnable
Enable/Disable. By default this is enabled.
RAPID-CITYEnableValuer/w
Textual Convention: RAPID-CITYEnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.16.1.3
rcIpRedistributeMetric
Value of the metric to be announced in the advertisement.
The range specified for ISIS is for other protocols that range
between (0 .. 65535)
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2272.1.8.100.16.1.4
rcIpRedistributeMetricType
specifies the type of the metric type, useful
for ISIS, OSPF and BGP only. In case of ISIS
type1 is treated as internal and type2 is
treated as external.
Enumerationr/w
Enumerated Values:
1type1
2type2
 .1.3.6.1.4.1.2272.1.8.100.16.1.5
rcIpRedistributeMatchRouteType
used to filter a route based on the route type.
applicable to BGP.
Enumerationr/w
Enumerated Values:
1internal
2external1
3external2
 .1.3.6.1.4.1.2272.1.8.100.16.1.6
rcIpRedistributeSetTag
Tag value to be set in the advertisment.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.16.1.7
rcIpRedistributeSubnets
applicable to OSPF only. Indicates that all the
subnets need to be advertised individually.
Enumerationr/w
Enumerated Values:
1allow
2supress
 .1.3.6.1.4.1.2272.1.8.100.16.1.8
rcIpRedistributeRoutePolicy
specify the route policy to achieve the final
granularity in filtering to determine whether
or not a specific route should be advertised
to the given protocol.Route map name
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.16.1.9
rcIpRedistributeASNumber
Autonomous system number. Used only for the
BGP protocol.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.16.1.10
rcIpRedistributeWeight
used only for the BGP protocol.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.16.1.11
rcIpRedistributeDefaultOriginate
indicates the given protocol will
originate/advertise a default route.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.16.1.12
rcIpRedistributeRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.16.1.13
rcIpRedistributeLevel
This is for ISIS. This sets the redistribute
level only. Set this to level2 to distribute the routes in
L2 LSPs. If the router is at level1 then setting redistribute
at level2 does not have any significance.
Enumerationr/w
Enumerated Values:
2level2
 .1.3.6.1.4.1.2272.1.8.100.16.1.14

rcIpOspfInFilterTable

table
.1.3.6.1.4.1.2272.1.8.100.19 · 1 row entry · 5 columns
Open in standard view 
IP Ospf In Filter table
rcIpOspfInFilterEntry entry .1.3.6.1.4.1.2272.1.8.100.19.1
An entry of Ip Ospf In Filter Table.
Indexes
rcIpOspfInFilterAdvertisingRtr
Column Syntax OID
rcIpOspfInFilterAdvertisingRtr SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.19.1.1
rcIpOspfInFilterEnable
IfIndex
RAPID-CITYEnableValuer/w
Textual Convention: RAPID-CITYEnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.19.1.2
rcIpOspfInFilterMetricType Enumerationr/w
Enumerated Values:
1type1
2type2
3any
 .1.3.6.1.4.1.2272.1.8.100.19.1.3
rcIpOspfInFilterPolicyName SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.19.1.4
rcIpOspfInFilterRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.19.1.5

rcIpRoutePrefTable

table
.1.3.6.1.4.1.2272.1.8.100.21 · 1 row entry · 3 columns
Open in standard view 
IP Route Pref table
rcIpRoutePrefEntry entry .1.3.6.1.4.1.2272.1.8.100.21.1
An entry of Ip Route Pref Table.
Indexes
rcIpRoutePrefProtocol
Column Syntax OID
rcIpRoutePrefProtocol
Protocol
Enumeration
Enumerated Values:
1local
2static
3mpls
4ospfIntra
5ospfInter
6isisLevel1
7isisLevel2
8ebgp
9rip
10ospfExternal1
11ospfExternal2
12ibgp
13staticv6
14ospfv3Intra
15ospfv3Inter
16ospfv3External1
17ospfv3External2
18spbmLevel1
19spbmv6Level1
 .1.3.6.1.4.1.2272.1.8.100.21.1.1
rcIpRoutePrefDefault
Shows the default preference value for the given
protocol.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.100.21.1.2
rcIpRoutePrefConfigured
This value is configurable by the user
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.100.21.1.3

rcIpRedistributeInterVrfTable

table
.1.3.6.1.4.1.2272.1.8.100.22 · 1 row entry · 15 columns
Open in standard view 
IP Redistribute table for Inter-VRFs
rcIpRedistributeInterVrfEntry entry .1.3.6.1.4.1.2272.1.8.100.22.1
An entry of Ip Redistribute Table.(new)
Indexes
rcIpRedistributeInterVrfDstVrfId rcIpRedistributeInterVrfProtocol rcIpRedistributeInterVrfSrcVrfId rcIpRedistributeInterVrfRouteSource
Column Syntax OID
rcIpRedistributeInterVrfDstVrfId
dst VRF id used in the redistribution
RC-VRF-MIBVrfIdentifier
Textual Convention: RC-VRF-MIBVrfIdentifier Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.100.22.1.1
rcIpRedistributeInterVrfProtocol
Protocol is any one of the dynamic routing
protocol, which is interested in receiving
the external routing info.
Enumeration
Enumerated Values:
1ospf
2bgp
3isis
4vrf-ext
5extranet
6rip
10ospfv3
11bgpv6
12isisv6
13ripng
14dvr
 .1.3.6.1.4.1.2272.1.8.100.22.1.2
rcIpRedistributeInterVrfSrcVrfId
src VRF id used in the redistribution
RC-VRF-MIBVrfIdentifier
Textual Convention: RC-VRF-MIBVrfIdentifier Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.100.22.1.3
rcIpRedistributeInterVrfRouteSource
equivalent to the owner field in the routing
table. This field indicates that the protocol
is interested in knowing/not-knowing the routes
learned from this source.
Enumeration
Enumerated Values:
1direct
2static
3rip
4ospf
5bgp
6extranet
10v6direct
11v6static
12ospfv3
13isis
14v6isis
15v6bgp
16ripng
17dvr
 .1.3.6.1.4.1.2272.1.8.100.22.1.4
rcIpRedistributeInterVrfEnable
Enable/Disable. By default this is enabled.
RAPID-CITYEnableValuer/w
Textual Convention: RAPID-CITYEnableValue Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.8.100.22.1.5
rcIpRedistributeInterVrfMetric
value of the metric to be announced in the
advertisment
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.22.1.6
rcIpRedistributeInterVrfMetricType
specifies the type of the metric type.
for OSPF: value 1 means type1 redistributed route and
value 2 means type2 redistributed route.
for ISIS: value 1 means internal redistributed route and
value 2 means exte…
Enumerationr/w
Enumerated Values:
1type1
2type2
3live
4none
 .1.3.6.1.4.1.2272.1.8.100.22.1.7
rcIpRedistributeInterVrfMatchRouteType
used to filter a route based on the route type.
applicable to BGP.
Enumerationr/w
Enumerated Values:
1internal
2external1
3external2
4none
 .1.3.6.1.4.1.2272.1.8.100.22.1.8
rcIpRedistributeInterVrfSetTag
Tag value to be set in the advertisment.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.22.1.9
rcIpRedistributeInterVrfSubnets
applicable to OSPF only. Indicates that all the
subnets need to be advertised individually.
Enumerationr/w
Enumerated Values:
1allow
2suppress
3none
 .1.3.6.1.4.1.2272.1.8.100.22.1.10
rcIpRedistributeInterVrfRoutePolicy
specify the route policy to achieve the final
granularity in filtering to determine whether
or not a specific route should be advertised
to the given protocol. Route map name.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.8.100.22.1.11
rcIpRedistributeInterVrfASNumber
Autonomous system number. Used only for the
BGP protocol.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.22.1.12
rcIpRedistributeInterVrfWeight
used only for the BGP protocol.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.22.1.13
rcIpRedistributeInterVrfDefaultOriginate
indicates the given protocol will
originate/advertise a default route.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.8.100.22.1.14
rcIpRedistributeInterVrfRowStatus
row status
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.22.1.15

rcIpExtCommunityAccessListTable

table
.1.3.6.1.4.1.2272.1.8.100.24 · 1 row entry · 12 columns
Open in standard view 
IP Extended Community Access List table.
rcIpExtCommunityAccessListEntry entry .1.3.6.1.4.1.2272.1.8.100.24.1
An entry of Ip Extended Community Access List Table.
Indexes
rcIpExtCommunityAccessListId rcIpExtCommunityAccessListMemberId
Column Syntax OID
rcIpExtCommunityAccessListId
IP extended Community Access List Id
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.2272.1.8.100.24.1.1
rcIpExtCommunityAccessListMemberId
Member Id for the extended-community list to be added
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.24.1.2
rcIpExtCommunityAccessListRTType
The route target Type for IP Extended Community rule in the list
Enumeration
Enumerated Values:
0none
1asnum
2ipaddr
 .1.3.6.1.4.1.2272.1.8.100.24.1.3
rcIpExtCommunityAccessListRTAddress
Extended community Ip address for the route-target type entry.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.24.1.4
rcIpExtCommunityAccessListRTAsNumber
Extended community Asnumber for the route-target type entry.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.24.1.5
rcIpExtCommunityAccessListRTAssignedNum
Extended community assigned number for the route-target type entry.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.24.1.6
rcIpExtCommunityAccessListSooType
The site of origin Type for IP Extended Community Access List
Enumeration
Enumerated Values:
0none
1asnum
2ipaddr
 .1.3.6.1.4.1.2272.1.8.100.24.1.7
rcIpExtCommunityAccessListSooAddress
Extended community Ip address for the site-of-origin type of entry.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.24.1.8
rcIpExtCommunityAccessListSooAsNumber
Extended community AsNumber for the site-of-origin type of entry.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2272.1.8.100.24.1.9
rcIpExtCommunityAccessListSooAssignedNum
Extended community assigned number for the site-of-origin type of entry.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.24.1.10
rcIpExtCommunityAccessListVrfId
VrfId for the extended-community Access list.
RC-VRF-MIBVrfIdentifierr/w
Textual Convention: RC-VRF-MIBVrfIdentifier Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.100.24.1.11
rcIpExtCommunityAccessListRowStatus
IP Ext Community Table Row Status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.24.1.12

rcIpExtACLTable

table
.1.3.6.1.4.1.2272.1.8.100.25 · 1 row entry · 6 columns
Open in standard view 
This table contains list of extended ACL (access control list) configuration.
The extended ACL is used to filter SA (Source-Active) messages by matching
both the source and destination address fields of a given packet.
rcIpExtACLEntry entry .1.3.6.1.4.1.2272.1.8.100.25.1
An entry (conceptual row) representing a prefix of an ACL list.
The ACL list is identified by the ACL name. User can add one
or multiple prefixes to an ACL list. Empty ACL list is not allowed.
Indexes
rcIpExtACLPrefixSourceAddr rcIpExtACLPrefixSourceMask rcIpExtACLPrefixDestinationAddr rcIpExtACLPrefixDestinationMask rcIpExtACLPrefixName
Column Syntax OID
rcIpExtACLPrefixSourceAddr
This is the source address of the prefix.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.25.1.1
rcIpExtACLPrefixSourceMask
This is the source mask of the prefix.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.25.1.2
rcIpExtACLPrefixDestinationAddr
This is the destination address of the prefix.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.25.1.3
rcIpExtACLPrefixDestinationMask
This is a destination mask of the prefix.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.8.100.25.1.4
rcIpExtACLPrefixName
This is the extended ACL list to which the prefixes belongs.
An extended ACL list must have one prefix at least.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.8.100.25.1.5
rcIpExtACLPrefixRowStatus
Used to create/delete prefixes from ACL list.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2272.1.8.100.25.1.6

rcIpPrefixListNameTable

table
.1.3.6.1.4.1.2272.1.8.100.27 · 1 row entry · 2 columns
Open in standard view 
Prefix List Name table
rcIpPrefixListNameEntry entry .1.3.6.1.4.1.2272.1.8.100.27.1
An entry of Prefix List Name Table.
Indexes
rcIpPrefixListNameId
Column Syntax OID
rcIpPrefixListNameId
list id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.27.1.1
rcIpPrefixListNameName
list name
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.8.100.27.1.2

rcIpRoutePolicyNameTable

table
.1.3.6.1.4.1.2272.1.8.100.28 · 1 row entry · 3 columns
Open in standard view 
Route Policy Name table for all VRFs
rcIpRoutePolicyNameEntry entry .1.3.6.1.4.1.2272.1.8.100.28.1
An entry of Route Policy Name Table.
Indexes
rcIpRoutePolicyNameVrfId rcIpRoutePolicyNameId
Column Syntax OID
rcIpRoutePolicyNameVrfId
route policy vrfId
RC-VRF-MIBVrfIdentifier
Textual Convention: RC-VRF-MIBVrfIdentifier Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.8.100.28.1.1
rcIpRoutePolicyNameId
route policy id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.8.100.28.1.2
rcIpRoutePolicyNameName
route policy name
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2272.1.8.100.28.1.3

rcIpNewRoutePrefTable

table
.1.3.6.1.4.1.2272.1.8.100.30 · 1 row entry · 3 columns
Open in standard view 
New IPv4 Route Pref table. This table and
rcIpv6RoutePrefTable are designed
to obsolete the rcIpRoutePrefTable
rcIpNewRoutePrefEntry entry .1.3.6.1.4.1.2272.1.8.100.30.1
An entry of New Ipv4 Route Pref Table.
Indexes
rcIpNewRoutePrefDefaultValue
Column Syntax OID
rcIpNewRoutePrefDefaultValue
Shows the default preference value for the given
protocol.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.100.30.1.1
rcIpNewRoutePrefProtocol
Protocol name
Enumeration
Enumerated Values:
1local
2static
3mpls
4ospfIntra
5ospfInter
6isisLevel1
7isisLevel2
8ebgp
9rip
10ospfExternal1
11ospfExternal2
12ibgp
13spbmLevel1
 .1.3.6.1.4.1.2272.1.8.100.30.1.2
rcIpNewRoutePrefConfiguredValue
This value is configurable by the user
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.8.100.30.1.3