This trap is sent when the device/card is going to perform reset.
rbTrapSource = NPU/AU/SU
rbTrapSeverity = Info
rbTrapCategory = Equipment 
rbTrapAdditionalInfo = 1..2  for external/internal fault.

Software download process is started.
rbTrapSource = 	NPU/AU/SU
rbTrapSeverity = Info,
	rbTrapCategory = PROC

Software download process is finished
rbTrapSource = 	NPU/AU/SU
rbTrapSeverity = Info,
rbTrapCategory = PROC

Software download process error. 
rbTrapSource = 	NPU/AU/SU
rbTrapSeverity = Minor,
rbTrapCategory = PROC 
rbTrapAdditionalInfo =100..103

Software switch over failed.
rbTrapSource = 	NPU/AU/SU
rbTrapSeverity = Minor,
rbTrapCategory = PROC,
rbTrapAdditionalInfo = 104..105

Software switch over succeeded ,
rbTrapSource = 	NPU/AU/SU
rbTrapSeverity = Info,
rbTrapCategory = PROC,
rbTrapAdditionalInfo =

BER Test is finished ,
rbTrapSource = 	SU
rbTrapSeverity = Info,
rbTrapCategory = PROC

BER Test is started ,
rbTrapSource = 	SU
rbTrapSeverity = Info,
rbTrapCategory = PROC

AU configured SW file and AU HW mismatch,
rbTrapSource = 	AU/SU
rbTrapSeverity = Minor,
rbTrapCategory = PROC

XML File Download status.
rbTrapSource = 	NPU
rbTrapSeverity = Info,
	rbTrapCategory = PROC,
	rbTrapAdditionalInfo = 220..224

Frequency Band File Download status.
rbTrapSource = 	NPU
rbTrapSeverity = Info,
	rbTrapCategory = PROC,
	rbTrapAdditionalInfo = 220..222,224

The Service is down or didn't start,
rbTrapSource = NPU, 
rbTrapSeverity = Major,
rbTrapCategory = QoS

The Service is operational,
rbTrapSource = NPU, 
rbTrapSeverity = Info,
rbTrapCategory = QoS

The Service was modified,
rbTrapSource = NPU, 
rbTrapSeverity = Info,
rbTrapCategory = QoS,
rbTrapAdditionalInfo = 119..122

Service error was detected,
rbTrapSource = NPU, 
rbTrapSeverity = Minor,
rbTrapCategory = QoS 
rbTrapAdditionalInfo =111..118.

Loop was detected on SU Ethernet port,
rbTrapSource = 	SU
rbTrapSeverity = Info,
rbTrapCategory = PROC,
rbTrapAdditionalInfo = 10..

RADIUS Client switched to another Authentication Server,
rbTrapSource = 	NPU 
rbTrapSeverity = Info,
rbTrapCategory = COMM

RADIUS Client switched to another Accounting Server,
rbTrapSource = 	NPU 
rbTrapSeverity = Info,
rbTrapCategory = COMM

Service establishment failure,
rbTrapSource = NPU, 
rbTrapSeverity = Minor,
rbTrapCategory = QoS 
rbTrapAdditionalInfo = 200 .. 210, 214
rbServiceIdx  = Service Profile Idx,
rbServiceName = Service Name is created from User Name(SU MAC) and Service Pipe index.

User authentication timeout,
rbTrapSource = 	NPU 
rbTrapSeverity = Info,
rbTrapCategory = COMM, 
rbTrapAdditionalInfo = 211 .. 213,
rbSuMacAddr = SU MAC.

User authentication rejected,
rbTrapSource = 	NPU 
rbTrapSeverity = Info,
rbTrapCategory = COMM, 
rbSuMacAddr = SU MAC.

Authentication Server Keep Alive Timeout was detected,
rbTrapSource = 	NPU,
rbTrapSeverity = Major,
rbTrapCategory = Equipment,
rbRadiusAuthServerAddress = Server IP Address.

Previously detected Authentication Server Keep Alive Timeout terminated,
rbTrapSource = 	NPU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment,
rbRadiusAuthServerAddress = Server IP Address.

Accounting Server Keep Alive Timeout was detected,
rbTrapSource = 	NPU,
rbTrapSeverity = Major,
rbTrapCategory = Equipment,
rbRadiusAcctServerAddress = Server IP Address.

Previously detected Accounting Server Keep Alive Timeout terminated,
rbTrapSource = 	NPU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment,
rbRadiusAcctServerAddress = Server IP Address.

External 1PPS failure was detected.
BS will produce this alarm only if external 1PPS clock is enabled,
		rbTrapSource = 	NPU,
	rbTrapSeverity = Major,
		rbTrapCategory = Equipment.

Previously detected External 1PPS failure terminated,
rbTrapSource = 	NPU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment.

Internal NPU 1PPS failure was detected,
rbTrapSource = 	NPU,
rbTrapSeverity = Major,
rbTrapCategory = Equipment.

Internal NPU 1PPS failure terminated,
rbTrapSource = 	NPU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment.

External 16MHz failure was detected.
BS will produce this alarm only if external 16MHz clock is enabled,
		rbTrapSource = 	NPU,
	rbTrapSeverity = Major,
		rbTrapCategory = Equipment.

External 16MHz failure terminated,
rbTrapSource = 	NPU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment.

Internal NPU 16MHz failure was detected. Can be produced by all types of BSs,
rbTrapSource = 	NPU,
rbTrapSeverity = Major,
rbTrapCategory = Equipment.

Internal NPU 16MHz failure terminated,
rbTrapSource = 	NPU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment.

GPS Com failure was detected. Can be produced only if GPS type is Trimble,
rbTrapSource = 	NPU,
rbTrapSeverity = Major,
rbTrapCategory = Equipment.

GPS Com failure terminated,
rbTrapSource = 	NPU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment.

GPS Healthy failure was detected. Can be produced only if GPS type is Trimble,
rbTrapSource = 	NPU,
rbTrapSeverity = Major,
rbTrapCategory = Equipment.

GPS Healthy failure terminated,
rbTrapSource = 	NPU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment.

Min4SatSync failure was detected.
This indicated that less than four satellites are received by the GPS.
Can be produced only if GPS type is Trimble,
		rbTrapSource = 	NPU,
	rbTrapSeverity = Major,
		rbTrapCategory = Equipment.

Min4SatSync failure terminated,
rbTrapSource = 	NPU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment.

External 1PPS failure was detected.
Can be produced by AU when the selected 1PPS arriving from active NPU is failed,
		rbTrapSource = 	AU,
	rbTrapSeverity = Major,
		rbTrapCategory = Equipment.

External 1PPS failure terminated,
rbTrapSource = 	AU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment.

HoldOver Entered was detected. 
Can be produced by AU when the AU goes to holdover,
			rbTrapSource = 	AU,
		rbTrapSeverity = Major,
			rbTrapCategory = Equipment.

HoldOver Entered terminated,
rbTrapSource = 	AU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment.

HoldOver passed was detected. 
Can be produced by AU when the AU holdover passed the Timeout,
			rbTrapSource = 	AU,
		rbTrapSeverity = Major,
			rbTrapCategory = Equipment.

HoldOver passed terminated,
rbTrapSource = 	AU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment.

HoldOver passed and Stop TX operation was detected,
rbTrapSource = 	AU,
rbTrapSeverity = Major,
rbTrapCategory = Equipment.

Stop TX operation terminated,
rbTrapSource = 	AU,
rbTrapSeverity = Info,
rbTrapCategory = Equipment.

Device/card has detected hardware fault.
rbTrapSource = 	NPU/AU/SU
rbTrapSeverity = Major
rbTrapCategory = Equipment 
rbTrapAdditionalInfo = 3..8,23..27.

Card is extracted from the shelf.
rbTrapSource = NPU/AU/PSU/PIU/ACU
rbTrapSeverity = Info,
rbTrapCategory = Equipment

Card is inserted in the shelf.
rbTrapSource = NPU/AU/PSU/PIU/ACU
rbTrapSeverity = Info,
rbTrapCategory = Equipment

Fault is detected in one of the Shelf Peripheral Equipment Units.
rbTrapSource = PSU#/PIU#/ACU#/ACU-FAN#/AU
rbTrapSeverity = Minor,
rbTrapCategory = Equipment 
rbTrapAdditionalInfo = 53..55

Previously detected fault in one of the shelf Peripheral Equipment Units is terminated.
rbTrapSource = PSU#/PIU#/ACU#/AU
rbTrapSeverity = Info,
rbTrapCategory = Equipment 
rbTrapAdditionalInfo = 53..55

Fault is detected in the shelf environment parameter.
rbTrapSource = 	NPU
rbTrapSeverity = Info,
rbTrapCategory = Equipment 
rbTrapAdditionalInfo = 73..76

Previously detected environment parameter fault is terminated.
rbTrapSource = 	NPU
rbTrapSeverity = Info,
rbTrapCategory = Equipment 
rbTrapAdditionalInfo = 73..76

Previously detected hardware fault is fixed.
rbTrapSource = 	NPU/AU/SU
rbTrapSeverity = Info
rbTrapCategory = Equipment 
rbTrapAdditionalInfo = 3..8,23..27.

Device is accessed via LCI or Telnet.
rbTrapSource = 	NPU/SU
rbTrapSeverity = Info,
rbTrapCategory = Equipment,
rbTrapAdditionalInfo = 140,141,
rbTrapIpAddress

Configuration change was detected,
rbTrapSource = 	NPU/AU/SU/RC/ODU/CHNL/SBSCR/SRVC
rbTrapSeverity = Info,
rbTrapCategory = Equipment 
rbTrapAdditionalInfo = 30..33.

Configuration change was detected,
rbTrapSource = 	NPU/AU/SU
rbTrapSeverity = Info,
rbTrapCategory = Equipment 
rbTrapSetFailureReason.

LCI or Telnet access was terminated 
rbTrapSource = 	NPU/SU
rbTrapSeverity = Info,
rbTrapCategory = Equipment,
rbTrapAdditionalInfo = 140,141,
rbTrapIpAddress

License Grace Period expiration warning,
rbTrapSource = 	MicroBST
rbTrapSeverity = Info,
rbTrapCategory = Proc,
rbTrapAdditionalInfo = 184,185.

Allowed quantity of CPEs exceeded in the actual Mbst,
rbTrapSource = 	MicroBST
rbTrapSeverity = Info,
rbTrapCategory = Proc,
rbSuMacAddr = Rejected SU Mac

License File Load process status,
rbTrapSource = 	NPU/MicroBST
rbTrapSeverity = Info,
rbTrapCategory = Proc,
rbTrapAdditionalInfo = 187..191

AU Network Entry status changed
rbTrapSource = 	AU
rbTrapSeverity = Info,
rbTrapCategory = Communication,
rbTrapAdditionalInfo = 135-139

Obsolete from release 2.5
CRC error in the ODU table was detected,
		rbTrapSource = 	AU
		rbTrapSeverity = Warning,
		rbTrapCategory = Communication,
		rbChannelId = number of channel

Obsolete from release 2.5
Previously detected CRC error in ODU table terminated,
		rbTrapSource = AU
	rbTrapSeverity = Info,
		rbTrapCategory = Communication,
		rbChannelId = number of channel

Error in the communication with the ODU unit was detected,
rbTrapSource = 	AU 
rbTrapSeverity = Minor,
rbTrapCategory = Communication,
rbChannelId = number of channel

Previously detected ODU communication error terminated,
rbTrapSource = 	AU,
rbTrapSeverity = Info,
rbTrapCategory = Communication,
rbChannelId = number of channel

Actual ODU Band does not match configured ODU Band,
rbTrapSource = 	AU,
rbTrapSeverity = Major,
rbTrapCategory = Communication,
rbChannelId = number of channel

Previously detected ODU Band mismatch terminated,
rbTrapSource = 	AU,
rbTrapSeverity = Info,
rbTrapCategory = Communication,
rbChannelId = number of channel

Actual ODU Max/Min Tx power does not match configured ODU Max/Min Tx power,
rbTrapSource = 	AU,
rbTrapSeverity = Info,
rbTrapCategory = Communication,
rbChannelId = number of channel

ODU unit failure was detected,
rbTrapSource = 	AU 
rbTrapSeverity = Major,
rbTrapCategory = Communication,
rbChannelId = number of channel, 
rbTrapAdditionalInfo = 225..228

Previously detected ODU failure terminated,
rbTrapSource = 	AU,
rbTrapSeverity = Info,
rbTrapCategory = Communication,
rbChannelId = number of channel

AU/SU mode conflict was detected
rbTrapSource = 	AU/SU
rbTrapSeverity = Major,
rbTrapCategory = Communication,
rbTrapAdditionalInfo = 144 .. 149.

AU/SU mode conflict terminated
rbTrapSource = 	AU/SU
rbTrapSeverity = Info,
rbTrapCategory = Communication,
rbTrapAdditionalInfo = 144.

SU reached the maximum allowed output power,
rbTrapSource = 	SU  
rbTrapSeverity = Info,
	rbTrapCategory = PROC

SU reached the minimum allowed output power 
rbTrapSource = 	SU  
rbTrapSeverity = Info,
	rbTrapCategory = PROC

Status of the SU's network entry. 
rbTrapSource = 	SU,
rbTrapSeverity = Info,
	rbTrapCategory = PROC,
	rbTrapAdditionalInfo = 132-134

License Grace Period expiration warning,
rbTrapSource = 	SU
rbTrapSeverity = Info,
rbTrapCategory = Proc,
rbTrapAdditionalInfo = 182-186, 
rbLicenseId = Type of License.

The SU Name is already in use by another SU. 
Services to the SU will be denied until another, unique name is configured for the SU. 
rbTrapSource = 	SU,
rbTrapSeverity = Major,
	rbTrapCategory = PROC
	rbSuMacAddr = Mac of other SU with same name,
	rbSuSysName = previous name,
	rbSuSysName = new name