RAD-SubRtr-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
28
Rows
28
Columns
202

rtrConfigIfTable

table
.1.3.6.1.4.1.164.11.1.1 · 1 row entry · 4 columns
Open in standard view 
Table of configured interfaces.
rtrConfigIfEntry entry .1.3.6.1.4.1.164.11.1.1.1
Each entry defines a configured interface.
Indexes
rtrConfigIfIndex
Column Syntax OID
rtrConfigIfIndex
This variable uniquely identifies the interface.
It is used as a cross reference in other system tables
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.164.11.1.1.1.1
rtrConfigIfType
This variable identifies the type of the specific
entry in the rtrDynamicIfConfigTable.
This field is writable only at creation time
(i.e., when value of status is underCreation).
RtrIfConfigTYPEr/w
Textual Convention: RtrIfConfigTYPE Enumeration
Type Values:
1other
6ethernetLan
7iso88023Csmacd
9tokenRingLan
15fddi
20basicISDN
21primaryISDN
22propPointToPoint
23ppp
28slip
32frameRelay
33rs232
37atm
40x25ple
45v35
62fastEther
69fastEtherFX
500virtualNet
1001cod
1002backUp
1004dialUp
1010b1isdn
1011b2isdn
1020ipBcst
1021ipPtp
1022ipxRaw
1023ipxEtType
1024ipxLlcSap
1025ipxLlcSnap
1026ipxPtp
1027brgUnder
1060wanDriver
1061ethernetDriver
1062tokenRingDriver
1064fddiDriver
1080virtualLan
1100unknown
 .1.3.6.1.4.1.164.11.1.1.1.2
rtrConfigIfName
This variable provides a logical name to a specific entry in
rtrConfigIfTable. It is also used in identifying the Driver
interfaces.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.1.1.1.3
rtrConfigIfStatus
The status of the ConfigEntry. The choices are those
defined in SNMPv2-TC. Only: active, createAndWait, and destroy
will be used.
active - The conceptual row is available for use by the managed device.
createAndWait -…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.1.1.1.4

rtrIfCfgTable

table
.1.3.6.1.4.1.164.11.1.2 · 1 row entry · 23 columns
Open in standard view 
Router Interface Configuration Table.
rtrIfCfgEntry entry .1.3.6.1.4.1.164.11.1.2.1
An entry in the Router Interface Configuration Table.
Indexes
rtrIfCfgIndex rtrIfCfgIpAddress
Column Syntax OID
rtrIfCfgIndex
This object indicates the Router Interface Index.
(In some cases it will be equal to the Router Interface ifIndex).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.1.2.1.1
rtrIfCfgIpAddress
IP Address of the Router Interface. - original description - deprecated.
For new applications, this object will be dummy index with constant value 0.0.0.0 .
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.1.2.1.2
rtrIfCfgRowStatus
This object enables the user to
create/delete entries of this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.1.2.1.3
rtrIfCfgIpMask deprecated
IP Mask Address Router Interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.1.2.1.4
rtrIfCfgIfIndex
ifIndex of the device interface connected
to this Router Interface.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.1.2.1.5
rtrIfCfgType
The Router Interface Type. By default it shall be notApplicabe(1).
atm - ATM router interface
lis - Logical IP Subnet router interface.
ethernet - Ethernet router interface.
loopback - indicates whether th…
Enumerationr/w
Enumerated Values:
1notApplicable
2atm
3lis
4ethernet
5loopback
6unmunbered
 .1.3.6.1.4.1.164.11.1.2.1.6
rtrIfCfgVlanId
The VLAN ID assigned to Tagged frames transmitted
from this Router Interface.
The value inserted should be a defined VLAN.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.164.11.1.2.1.7
rtrIfCfgMtu
The size of the largest packet which can be sent/received
on the interface, specified in octets. For interfaces that
are used for transmitting network datagrams, this is the
size of the largest network datagram that ca…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.1.2.1.8
rtrIfCfgName
The Router Interface Name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.1.2.1.9
rtrIfCfgConnectionPointer
This parameter represents the entity that is connected
to this Router Interface.

The value of this parameter is a pointer to an existing row of a table,
where the entity connected to this Router Interface…
SNMPv2-TCRowPointerr/w
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.164.11.1.2.1.10
rtrIfCfgVlanTagging
The VLAN Tagging.
Enumerationr/w
Enumerated Values:
1notApplicable
2untag
3tag
 .1.3.6.1.4.1.164.11.1.2.1.11
rtrIfCfgVlanPriority
The VLAN Priority.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.1.2.1.12
rtrIfCfgParams
This object represents one or more parameters of the Router Interface.
Each group of bits (one or more bits) represents a specific parameter
and its possible values.
This object's mapping and interpretation will be spec…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.1.2.1.13
rtrIfCfgMngAccess
This object represents Management Access availability via
this Router Interface.
disable (2) - the access is disabled
enable (3) - the access is enabled
pingAllow (4) - the ping access only is allowed.
Enumerationr/w
Enumerated Values:
1notApplicable
2disable
3enable
4pingAllow
 .1.3.6.1.4.1.164.11.1.2.1.14
rtrIfCfgLlcSnapEncaps
This object represents the LLC/SNAP Encapsulation.
Enumerationr/w
Enumerated Values:
1notApplicable
2bridgedPdu
3routedPdu
 .1.3.6.1.4.1.164.11.1.2.1.15
rtrIfCfgDhcp
This object indicates whether DHCP is enabled for this Router Interface.
Enumerationr/w
Enumerated Values:
1notApplicable
2disable
3enable
 .1.3.6.1.4.1.164.11.1.2.1.16
rtrIfCfgIfIpAddressType deprecated
This object indicates IP Address Type (v4, v6) of rtrIfIpAddress
for this Router Interface.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.11.1.2.1.17
rtrIfCfgIfIpAddress deprecated
This object indicates IP address of this Router Interface.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.1.2.1.18
rtrIfCfgICMPUnreachable
This object indicates whether sending ICMP Unreachable message
is enabled for this Router Interface.
Enumerationr/w
Enumerated Values:
2disable
3enable
 .1.3.6.1.4.1.164.11.1.2.1.19
rtrIfCfgIpv6AutoConfig
This object determines whether IPv6 auto-configuration
is enabled for this Router Interface.
disable (2) - IPv6 auto-configuration is disabled
enable (3) - IPv6 auto-configuration is enabled
Enumerationr/w
Enumerated Values:
2disable
3enable
 .1.3.6.1.4.1.164.11.1.2.1.20
rtrIfCfgDhcpRelay
This object indicates whether DHCP Relay is enabled
for this Router Interface.
Enumerationr/w
Enumerated Values:
2disable
3enable
 .1.3.6.1.4.1.164.11.1.2.1.26
rtrIfCfgDhcpv6ClientAdminStatus
This object defines the administrative status of DHCPv6 client for
Router Interface.
Enumerationr/w
Enumerated Values:
2disable
3enable
 .1.3.6.1.4.1.164.11.1.2.1.27
rtrIfCfgIpForwarding
This object defines whether received traffic into specific interface
is forwarded to other Router Interfaces or not.
Enumerationr/w
Enumerated Values:
2disable
3enable
 .1.3.6.1.4.1.164.11.1.2.1.28

rtrStaticRouteTable

table
.1.3.6.1.4.1.164.11.1.3 · 1 row entry · 18 columns
Open in standard view 
This entity's IP Routing table.
rtrStaticRouteEntry entry .1.3.6.1.4.1.164.11.1.3.1
A particular route to a particular destination, under a
particular policy (as reflected in the
rtrStaticRoutePolicy object).

Dynamically created rows will survive an agent reboot.

Implementers …
Indexes
rtrStaticRouteDestType rtrStaticRouteDest rtrStaticRoutePfxLen rtrStaticRoutePolicy rtrStaticRouteNextHopType rtrStaticRouteNextHop
Column Syntax OID
rtrStaticRouteDestType
The type of the rtrStaticRouteDest address, as defined
in the InetAddress MIB.

Only those address types that may appear in an actual
routing table are allowed as values of this object.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.11.1.3.1.1
rtrStaticRouteDest
The destination IP address of this route.

The type of this address is determined by the value of
the rtrStaticRouteDestType object.

The values for the index objects rtrStaticRouteDest and
r…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.1.3.1.2
rtrStaticRoutePfxLen
Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
rtrStaticRouteDest field.

The values for the index ob…
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.164.11.1.3.1.3
rtrStaticRoutePolicy
This object is an opaque object without any defined
semantics. Its purpose is to serve as an additional
index that may delineate between multiple entries to
the same destination. The value { 0 0 } shall be used
as the…
ObjectIdentifier .1.3.6.1.4.1.164.11.1.3.1.4
rtrStaticRouteNextHopType
The type of the rtrStaticRouteNextHop address, as
defined in the InetAddress MIB.

Value should be set to unknown(0) for non-remote
routes.

Only those address types that may appear in an act…
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.11.1.3.1.5
rtrStaticRouteNextHop
On remote routes, the address of the next system en
route. For non-remote routes, a zero length string.

The type of this address is determined by the value of
the rtrStaticRouteNextHopType object.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.1.3.1.6
rtrStaticRouteRtRIfIndex
This object is the Router IP Interface corresponding to
rtrIfCfgEntry.rtrIfCfgIndex in opposite to the RFC4292
that define the object inetCidrRouteIfIndex - which is the ifIndex
of the interface
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.1.3.1.7
rtrStaticRouteType
The static Routing table shall have the type of route
equal to remote(4) by default and cannot be changed by the
user.
Note that the other values are specified in order
to keep consistency with the RFC4292.
Enumeration
Enumerated Values:
1other
2reject
3local
4remote
5blackhole
 .1.3.6.1.4.1.164.11.1.3.1.8
rtrStaticRouteProto
The routing mechanism via which this route was learned.
Inclusion of values for gateway routing protocols is
not intended to imply that hosts should support those
protocols.
The default value shall be netmgmt(3) corresp…
IANA-RTPROTO-MIBIANAipRouteProtocol
Textual Convention: IANA-RTPROTO-MIBIANAipRouteProtocol Enumeration
Type Values:
1other
2local
3netmgmt
4icmp
5egp
6ggp
7hello
8rip
9isIs
10esIs
11ciscoIgrp
12bbnSpfIgp
13ospf
14bgp
15idpr
16ciscoEigrp
17dvmrp
18rpl
19dhcp
20ttdp
 .1.3.6.1.4.1.164.11.1.3.1.9
rtrStaticRouteAge
The number of seconds since this route was last updated
or otherwise determined to be correct. Note that no
semantics of 'too old' can be implied, except through
knowledge of the routing protocol by which the route
was…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.1.3.1.10
rtrStaticRouteNextHopAS
The Autonomous System Number of the Next Hop. The
semantics of this object are determined by the routing-
protocol specified in the route's rtrStaticRouteProto
value. When this object is unknown or not relevant, its
v…
INET-ADDRESS-MIBInetAutonomousSystemNumberr/w
Textual Convention: INET-ADDRESS-MIBInetAutonomousSystemNumber Unsigned32
 .1.3.6.1.4.1.164.11.1.3.1.11
rtrStaticRouteMetric1
The primary routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's rtrStaticRouteProto
value. If this metric is not used, its value should be
set t…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.1.3.1.12
rtrStaticRouteMetric2
An alternate routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's rtrStaticRouteProto
value. If this metric is not used, its value should be
set …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.1.3.1.13
rtrStaticRouteMetric3
An alternate routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's rtrStaticRouteProto
value. If this metric is not used, its value should be
set …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.1.3.1.14
rtrStaticRouteMetric4
An alternate routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's rtrStaticRouteProto
value. If this metric is not used, its value should be
set …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.1.3.1.15
rtrStaticRouteMetric5
An alternate routing metric for this route. The
semantics of this metric are determined by the routing-
protocol specified in the route's rtrStaticRouteProto
value. If this metric is not used, its value should be
set …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.1.3.1.16
rtrStaticRouteStatus
The row status variable, used according to row
installation and removal conventions.

A row entry cannot be modified when the status is
marked as active(1).
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.1.3.1.17
rtrStaticRouteNoInstall
Static Route entry option to not install the route
into forwarding table.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.164.11.1.3.1.18

ipIfStatsXTable

table
.1.3.6.1.4.1.164.11.1.4 · 1 row entry · 1 columns
Open in standard view 
An Augment of RFC4293.ipIfStatsTable
ipIfStatsXEntry entry .1.3.6.1.4.1.164.11.1.4.1
An entry in the table.
Indexes
No indexes recorded
Column Syntax OID
ipIfStatsXClearStatisticsCmd
Indicates a user command to clear all counters in row.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.164.11.1.4.1.1

ipSystemStatsXTable

table
.1.3.6.1.4.1.164.11.1.5 · 1 row entry · 2 columns
Open in standard view 
An Augment of RFC4293.ipSystemStatsTable
ipSystemStatsXEntry entry .1.3.6.1.4.1.164.11.1.5.1
An entry in the table.
Indexes
No indexes recorded
Column Syntax OID
ipSystemStatsXClearStatisticsCmd
Indicates a user command to clear all counters in row.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.164.11.1.5.1.1
ipSystemStatsXClearAllStatisticsCmd
Clear action to be performed on one of the router's componenet's
Statistics, or on all router component statistics.
Enumerationr/w
Enumerated Values:
2off
3all
4ip-traffic
5access-list
 .1.3.6.1.4.1.164.11.1.5.1.2

ifIpAddressTable

table
.1.3.6.1.4.1.164.11.1.7 · 1 row entry · 7 columns
Open in standard view 
This table associates IP Address to Router Interface.
ifIpAddressEntry entry .1.3.6.1.4.1.164.11.1.7.1
An entry in the Table.
Indexes
ifIpAddressAddrType ifIpAddressAddr ifIpAddressPrefixLength ifIpAddressIfIndex
Column Syntax OID
ifIpAddressAddrType
The address type of IP Address associated to a Router Interface.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.11.1.7.1.1
ifIpAddressAddr
The IP address associated to the Router Interface.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.1.7.1.2
ifIpAddressPrefixLength
The prefix length associated with this prefix.
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.164.11.1.7.1.3
ifIpAddressIfIndex
The ifIndex of the Router Interface
to which the IP Address is associated.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.164.11.1.7.1.4
ifIpAddressRowStatus
The status of this conceptual row.
This object allows creating and deleting rows in
this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.1.7.1.5
ifIpAddressPrefix
Indicates a the Prefix of the configured Address.
IP Address and Prefix must have the same type (IPv4/IPv6).
The address type of this object is specified in ipAddressAddrType.
The length of this object is the standard l…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.1.7.1.6
ifIpAddressOrigin
The Origin of the IP Address.

manual (2) indicates that the address was manually configured
to a specified address, e.g., by user configuration.

dhcp (4) indicates an address that w…
Enumeration
Enumerated Values:
1other
2manual
4dhcp
5linklayer
6random
7nat
 .1.3.6.1.4.1.164.11.1.7.1.7

rtrIfCfgBfdSessTable

table
.1.3.6.1.4.1.164.11.1.8 · 1 row entry · 3 columns
Open in standard view 
The Router Interface BFD Session Table specifies information
on BFD sessions attached to this Router Interface.
rtrIfCfgBfdSessEntry entry .1.3.6.1.4.1.164.11.1.8.1
The Router Interface BFD Session Table specifies information
on BFD sessions attached to this Router Interface.
Indexes
rtrIfCfgIndex
Column Syntax OID
rtrIfCfgBfdSessDesiredMinTxInterval
This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and should not be used.
Enumerationr/w
Enumerated Values:
3300interval3300microsec
10000interval10000microsec
100000interval100000microsec
1000000interval1000000microsec
10000000interval10000000microsec
 .1.3.6.1.4.1.164.11.1.8.1.1
rtrIfCfgBfdSessReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not w…
Enumerationr/w
Enumerated Values:
3300interval3300microsec
10000interval10000microsec
100000interval100000microsec
1000000interval1000000microsec
10000000interval10000000microsec
 .1.3.6.1.4.1.164.11.1.8.1.2
rtrIfCfgBfdSessDetectMult
This object specifies the Detect time multiplier.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.1.8.1.3

rtrIpAddrTable

table
.1.3.6.1.4.1.164.11.2.1 · 1 row entry · 6 columns
Open in standard view 
This table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects.
rtrIpAddrEntry entry .1.3.6.1.4.1.164.11.2.1.1
The addressing information for one of this
entity's IP addresses.
Indexes
rtrIpAdEntAddr
Column Syntax OID
rtrIpAdEntAddr
The IP address to which this entry's addressing
information pertains.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.1.1.1
rtrIpAdEntIfIndex
The index value which uniquely identifies the
interface to which this entry is applicable. The
interface identified by a particular value of this
index is the same interface as identified by the
same value of ifIndex.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.2.1.1.2
rtrIpAdEntNetMask
The subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.1.1.3
rtrIpAdEntForwardIpBroadcast
This variable controls forwarding of IP (sub)net-directed
broadcasts destined for an attached sub(net).
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.164.11.2.1.1.4
rtrIpAdEntBackupAddr SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.1.1.5
rtrIpAdEntStatus
The Status variable is used to create and destroy a Ip Addresses.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.2.1.1.6

rtrIcmpRdTable

table
.1.3.6.1.4.1.164.11.2.2.2 · 1 row entry · 8 columns
Open in standard view 
This table contains ICMP Router Discovery parameters
configurated per IP interface.
rtrIcmpRdEntry entry .1.3.6.1.4.1.164.11.2.2.2.1
The ICMP parameters configurated for IP interface.
Indexes
rtrIcmpRdIpAddr
Column Syntax OID
rtrIcmpRdIpAddr
The IP address to which this entry's information pertains.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.2.2.1.1
rtrIcmpRdIpAdvertAddr
The IP destination address to be used for multicast
Router Advertisements sent from the interface. The
only permissible values are the all-systems multicast
address, 224.0.0.1, or the limited-broadcast address,
255.255.…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.2.2.1.2
rtrIcmpRdMaxAdvertInterval
The maximum time allowed between sending multicast
Router Advertisements from the interface, in seconds.
Must be no less than 4 seconds and no greater than 1800
seconds.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.164.11.2.2.2.1.3
rtrIcmpRdMinAdvertInterval
The minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface, in
seconds. Must be no less than 3 seconds and no greater
than rtrIcmpRdMaxAdvertInterval.
Default: 0.75 * rtrIcm…
Integer32r/w
Constraints:
range: 3-1800
 .1.3.6.1.4.1.164.11.2.2.2.1.4
rtrIcmpRdAdvertLifetime
The maximum length of time that the advertised addresses
are to be considered as valid. Must be no less than
rtrIcmpRdMaxAdvertInterval and no greater than 9000 seconds.
Default: 3 * rtrIcmpRdMaxAdvertInterval.
Integer32r/w
Constraints:
range: 4-9000
 .1.3.6.1.4.1.164.11.2.2.2.1.5
rtrIcmpRdAdvertise
A flag indicating whether or not the address is to be
advertised.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.164.11.2.2.2.1.6
rtrIcmpRdPreferenceLevel
The preferability of the address as a default router
address, relative to other router addresses on the same
subnet.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.2.2.2.1.7
rtrIcmpRdEntStatus
Setting of any value to this object set values of
all fields to the default values.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.2.2.2.1.8

rtrRip2IfConfTable

table
.1.3.6.1.4.1.164.11.2.3.1 · 1 row entry · 4 columns
Open in standard view 
This table is an extension of rip2IfConfTable (RFC 1724 ,RIP 2).
It means that every time somebody creates/destroys a row in the
rip2IfConfTable, the same row should be automatically created/destroyed  
in this table.
rtrRip2IfConfEntry entry .1.3.6.1.4.1.164.11.2.3.1.1
An entry in table rtrRip2IfConfTable.
Indexes
rtrRip2IfConfAddress
Column Syntax OID
rtrRip2IfConfAddress
The IP Address of this system on the indicated subnet.
For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.3.1.1.1
rtrRip2IfConfVirtualDis deprecated
This variable defines the virtual number of hops assigned to
the interface specified by rtrIfIpAddrIndex. This enables
fine-tuning of the RIP routing algorithm.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.2.3.1.1.2
rtrRip2IfConfAutoSend deprecated
When set to enable only the default route is sent through
the interface. When set to disable, regular RIPs are sent.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.164.11.2.3.1.1.3
rtrRip2IfConfRipEnable
This object shows whether RIP Protocol is enabled on the current interface.
Enumerationr/w
Enumerated Values:
2no
3yes
 .1.3.6.1.4.1.164.11.2.3.1.1.4

rtrNatIfConfTable

table
.1.3.6.1.4.1.164.11.2.5.1 · 1 row entry · 6 columns
Open in standard view 
A list of interfaces which require separate NAT configuration.
rtrNatIfConfEntry entry .1.3.6.1.4.1.164.11.2.5.1.1
A single routing domain in a single subnet.
Indexes
IF-MIBifIndex rtrNatIfVirtualAddress rtrNatIfVirtualMask
Column Syntax OID
rtrNatIfVirtualAddress
The IP Address of the virtual subnet to be translated by the 'NAT box'
attached to this interface.
For some devices/cases, it might represent the Virtual Lowest IP Address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.5.1.1.1
rtrNatIfVirtualMask
The subnet Mask of the virtual subnet.
For some devices/cases, it might represent the Virtual Highest IP Address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.5.1.1.2
rtrNatIfConfStatus
Writing 'destroy' has the effect of deleting this interface.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.2.5.1.1.3
rtrNatIfRealAddress
The IP Address of the real subnet which is used by 'NAT box' for translation.
For some devices/cases, it might represent the Real Lowest IP Address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.5.1.1.4
rtrNatIfRealMask
The subnet Mask of the real subnet.
For some devices/cases, it might represent the Real Highest IP Address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.5.1.1.5
rtrNatIfType
NAT type.

static - Translate a specific virtual IP network to a specific real IP
network. TCP, UDP and ICMP sessions originated both in real and
virtual networks will be translated.
d…
Enumerationr/w
Enumerated Values:
1static
2dynamic
3pat
4transparent
 .1.3.6.1.4.1.164.11.2.5.1.1.6

rtrPatTable

table
.1.3.6.1.4.1.164.11.2.5.2 · 1 row entry · 7 columns
Open in standard view 
Port Address Translation (PAT -  single IP NAT) configuration Table.
rtrPatEntry entry .1.3.6.1.4.1.164.11.2.5.2.1
Each entry describe unique mapping between real IP address,
range of ports and protocol, to local (virtual) IP address.
Ports are used in the TCP (rfc793) to name the ends of logical
connections which carry long term c…
Indexes
rtrPatIdx
Column Syntax OID
rtrPatIdx
Running index for PAT table.
Integer32
Constraints:
range: 1-30
 .1.3.6.1.4.1.164.11.2.5.2.1.1
rtrPatRealAddress
The real IP Address used for translation
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.5.2.1.2
rtrPatVirtualAddress
The virtual IP Address used for translation
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.2.5.2.1.3
rtrPatLowestPort
Lowest Port number for this PAT entry
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.164.11.2.5.2.1.4
rtrPatHighestPort
Highest Port number for this PAT entry
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.164.11.2.5.2.1.5
rtrPatProtocol
Protocol selected.
This Protocol and port range (lowest port - highest port)
define the application (FTP, Telnet, SMTP etc.).
Protocol enumaration numbers correspond to IP header 'protocol' field
(e.g. 6 means TCP, 17 …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.2.5.2.1.6
rtrPatStatus
This object enables creating and deleting
entries of the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.2.5.2.1.7

rtrInformationTable

table
.1.3.6.1.4.1.164.11.3 · 1 row entry · 3 columns
Open in standard view 
This table traces the agent fatal error.
rtrInformationEntry entry .1.3.6.1.4.1.164.11.3.1
This table has a single row entry and provides
Information related to the last reboot.
Indexes
rtrInformationId
Column Syntax OID
rtrInformationId
rtrInformationId =1
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.3.1.1
rtrInformationProtMemAllocStatus
Protocol Memory Allocation Alarm Status.
Enumeration
Enumerated Values:
1error
2clearError
3fatalError
 .1.3.6.1.4.1.164.11.3.1.2
rtrInformationProtMemAllocInfo
Protocol Memory Allocation Alarm additional information.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.3.1.3

rtrFACSActTable

table
.1.3.6.1.4.1.164.11.5.2 · 1 row entry · 4 columns
Open in standard view 
The table of  FACS action.
rtrFACSActEntry entry .1.3.6.1.4.1.164.11.5.2.1
Each rtrFACSActEntry consist of the following parameters
Indexes
rtrFACSActType rtrFACSActIfIndex
Column Syntax OID
rtrFACSActType
This parameter indicates on which FACS Table the FACS
action will preform.
Enumeration
Enumerated Values:
1tx
2rx
 .1.3.6.1.4.1.164.11.5.2.1.1
rtrFACSActIfIndex
The interface to which this FACS entry is applicable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.5.2.1.2
rtrFACSAction
The management station that sends a SET request for one of these actions
with indexes rtrFACSType and rtrFACSIfIndex defines the type and the
interface Id for which all FACS statements are to be erased.
If no interfa…
Enumerationr/w
Enumerated Values:
1none
2eraseIP
3eraseDECnet
4eraseIPX
5eraseBrg
6replaceIP
8replaceIPX
9replaceBrg
10backupIP
12backupIPX
13backupBrg
 .1.3.6.1.4.1.164.11.5.2.1.3
rtrFACSActiveDB
This parameter will point on which Facs DataBase the SNMP agent
read. The Active dataBase is Read Only. The user may change FACS
statements in the temporary DataBase and then write it to the
Active DB.
Enumerationr/w
Enumerated Values:
1active
2temporary
 .1.3.6.1.4.1.164.11.5.2.1.4

rtrFACSTable

table
.1.3.6.1.4.1.164.11.5.3 · 1 row entry · 14 columns
Open in standard view 
The table of  FACS statment.
rtrFACSEntry entry .1.3.6.1.4.1.164.11.5.3.1
Each FACS statment consists of the following parameters
Indexes
rtrFACSIfIndex rtrFACSProtocolType rtrFACSType rtrFACSIndex
Column Syntax OID
rtrFACSIfIndex
The interface to which this FACS entry is applicable.
For applications this variables is always 0.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.5.3.1.1
rtrFACSProtocolType
This parameter define the protocol the Security Access Control
is applicable.
Enumeration
Enumerated Values:
1ip
2ipx
3dec
4bridge
 .1.3.6.1.4.1.164.11.5.3.1.2
rtrFACSType
The Mode of in which this FACS statement operates.
For applications this variable is always rx(2).
Enumeration
Enumerated Values:
1tx
2rx
3cod
 .1.3.6.1.4.1.164.11.5.3.1.3
rtrFACSIndex
Index to the FACS Table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.5.3.1.4
rtrFACSSrcAdd
The size of the octet string will be according to the protocol type
defined in rtrFACSProtocolType.
OctetStringr/w .1.3.6.1.4.1.164.11.5.3.1.5
rtrFACSSrcAddMask
Source-address mask .
OctetStringr/w .1.3.6.1.4.1.164.11.5.3.1.6
rtrFACSDesAdd
Destination-address The size of the octet string will be according to the
protocol type define in rtrFACSProtocolType .
OctetStringr/w .1.3.6.1.4.1.164.11.5.3.1.7
rtrFACSDesAddMask
Destination-address mask .
OctetStringr/w .1.3.6.1.4.1.164.11.5.3.1.8
rtrFACSOperation
... .
Enumerationr/w
Enumerated Values:
1block
2forward
3permit
4deny
129blockAndReport
 .1.3.6.1.4.1.164.11.5.3.1.9
rtrFACSNetFiltering
... .
Enumerationr/w
Enumerated Values:
1none
2l2multicast
3arp
4icmp
5ip
6udp
7tcp
8decnet
9ipx
 .1.3.6.1.4.1.164.11.5.3.1.10
rtrFACSSocketNum
Port/socket number for different applications
0 is default meaning not applicable.
none(1),
ftp(21),
telnet(23),
smtp(25),
tftp(69),
snmp(161),
snmpTrap(162),
rip(520),
sapIPX(1106),
ripIPX(1107)
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.5.3.1.11
rtrFACSMask1Id
Index into RND mask table FACS/COD Type) .
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.5.3.1.12
rtrFACSMask2Id
Index into RND mask table FACS/COD according to
the value of rtrFACSType .
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.5.3.1.13
rtrFACSStatus
The status of a table entry.
Enumerationr/w
Enumerated Values:
1valid
2createRequest
3underCreation
4invalid
 .1.3.6.1.4.1.164.11.5.3.1.14

rtrRtmEntityTable

table
.1.3.6.1.4.1.164.11.6 · 1 row entry · 7 columns
Open in standard view 
The table of  RTM entities.
rtrRtmEntityEntry entry .1.3.6.1.4.1.164.11.6.1
Each entry represents an instance of the RTM entity.
Indexes
rtrRtmEntityAfiType rtrRtmEntitySafi
Column Syntax OID
rtrRtmEntityAfiType
The AFI index of the rtrRtmEntityTable.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.11.6.1.1
rtrRtmEntitySafi
The SAFI index of the rtrRtmEntityTable.
RtrSafi
Textual Convention: RtrSafi Enumeration
Type Values:
1unicast
2multicast
3both
128mplsBgpVpn
 .1.3.6.1.4.1.164.11.6.1.2
rtrRtmEntityDsStatDf
The default administrative distance used for statically
defined routes in the static routes MIB table. It can be
overridden for individual static routes. The lower the
distance for a given route, the more likely that …
AdminDistancer/w
Textual Convention: AdminDistance Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.6.1.3
rtrRtmEntityDsOspfInt
The administrative distance used for OSPF internal routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by RTM
as the active route for the given destination.
AdminDistancer/w
Textual Convention: AdminDistance Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.6.1.4
rtrRtmEntityDsOspfExt
The administrative distance used for OSPF Autonomous System
external routes. The lower the distance for a given type of route,
the more likely a route of this type is to be used by RTM
as the active route for the give…
AdminDistancer/w
Textual Convention: AdminDistance Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.6.1.5
rtrRtmEntityDsIntBgp
The administrative distance used for internal and VPN BGP routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by RTM
as the active route for the given destination.
AdminDistancer/w
Textual Convention: AdminDistance Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.6.1.6
rtrRtmEntityDsExtBgp
The administrative distance used for external BGP routes.
The lower the distance for a given type of route,
the more likely a route of this type is to be used by RTM
as the active route for the given destination.
AdminDistancer/w
Textual Convention: AdminDistance Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.6.1.7

rtrBridgePortConfigTable

table
.1.3.6.1.4.1.164.11.7.1 · 1 row entry · 3 columns
Open in standard view 
Table of the bridge ports
rtrBridgePortConfigEntry entry .1.3.6.1.4.1.164.11.7.1.1
Each entry defines a bridge port
Indexes
rtrBridgePortCIndex
Column Syntax OID
rtrBridgePortCIndex
This is the index of the bridge port. It is the same
as 'dot1dBasePort' of the Bridge MIB.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.7.1.1.1
rtrBridgePortCIf
The config ifIndex the bridge port is sitting on.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.7.1.1.2
rtrBridgePortCStatus
The status of the RtrBridgePortConfigEntry.
Creating and destroying the bridge port is done by this
variable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.7.1.1.3

rtrConfigTable

table
.1.3.6.1.4.1.164.11.9.1 · 1 row entry · 15 columns
Open in standard view 
The Router's Configuration table.
rtrConfigEntry entry .1.3.6.1.4.1.164.11.9.1.1
An entry in the Router's Configuration table.
Indexes
rtrConfigIndex
Column Syntax OID
rtrConfigIndex
This object indicates the Router's Index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.9.1.1.1
rtrConfigDefaultGateway
Router Default Gateway.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.9.1.1.2
rtrConfigArpAgingTime
ARP Aging Time.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.9.1.1.3
rtrConfigClassifierTosMask
This object indicates the Classifier's TOS Mask,
as follows:
0x1C for DTR -- rfc795
0x1E for Cisco
0xE0 for Precedence -- rfc795
0xFC for Diffserv
Else for Manual
.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.9.1.1.5
rtrConfigRIPMode
This object determines the Router Information Protocol
to measure the shortest path between 2 positions
on the network.
Enumerationr/w
Enumerated Values:
1notApplicable
2rip1
3rip2
4rip1And2
 .1.3.6.1.4.1.164.11.9.1.1.6
rtrConfigRoutingName
The unique name given to a specific virtual Router instance.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.164.11.9.1.1.7
rtrConfigRowStatus
This object enables creating and deleting rows in table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.9.1.1.8
rtrConfigDhcpClientOpHostNameType
DHCP Host Name type according to option 12
This parameters holds the type of the name.
(the name itself is set in dhcpClientOpHostName).
0 - user-configured identifier
1 - sysName
Enumerationr/w
Enumerated Values:
0userId
1sysName
 .1.3.6.1.4.1.164.11.9.1.1.9
rtrConfigDhcpClientOpHostName
The DHCP Host Name.
Name should include at least 1 character.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.9.1.1.10
rtrConfigDhcpClientOpVendorClassIdType
DHCP Vendor ClassId type
This parameters holds the type of the name.
(the name itself is set in dhcpClientOpVendorClassId).
0 - user-configured identifier
1 - entPhysicalName
.
Enumerationr/w
Enumerated Values:
0userId
1entPhysicalName
 .1.3.6.1.4.1.164.11.9.1.1.11
rtrConfigDhcpClientOpVendorClassId
The Vendor Class Identifier.
Identifier should include at least 1 character.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.9.1.1.12
rtrConfigDhcpClientOpControl
The Administrative Status of the different options.
Bit=1 means that respective option is enabled/activated.
Bitsr/w
Enumerated Values:
0vendorClassId
1hostName
 .1.3.6.1.4.1.164.11.9.1.1.13
rtrConfigClearIpv4ArpCmd
Clear action to be performed on IPv4 ARP Table associate to the Router.
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.11.9.1.1.14
rtrConfigClearIpv6NeighborCmd
Clear action to be performed on IPv6 Neighbor Table associate to the Router.
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.11.9.1.1.15
rtrConfigRouterDscp
The DSCP value of any packet generated in the related Router Entity.
Router Entity traffic includes control protocols.
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.164.11.9.1.1.16

rtrFwdTable

table
.1.3.6.1.4.1.164.11.9.3 · 1 row entry · 11 columns
Open in standard view 
The Router's Forwarding Table.
rtrFwdEntry entry .1.3.6.1.4.1.164.11.9.3.1
An entry in the Router's Forwarding table.
Indexes
rtrFwdIdx rtrFwdIpAddress rtrFwdIpMask rtrFwdRuleIdx
Column Syntax OID
rtrFwdIdx
This object indicates the Router Index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.9.3.1.1
rtrFwdIpAddress
This object indicates the Destination IP Address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.9.3.1.2
rtrFwdIpMask
This object indicates the Mask IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.9.3.1.3
rtrFwdRuleIdx
This object indicates the Rule's Number.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.9.3.1.4
rtrFwdRowStatus
This object enables the user to
create/delete entries in this table.

Entry of Type rtrFwdType = staticRouting(3)
are created by the user.
Only this type of entries can be deleted by the user.
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.9.3.1.5
rtrFwdNextHop
This object indicates the IP Address of the Next Hop.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.9.3.1.6
rtrFwdIfIndex
This object indicates the Interface Index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.9.3.1.7
rtrFwdType
The type of route. Note that local(3) refers
to a route for which the next hop is the final
destination; remote(4) refers to a route for
which the next hop is not the final destina-
tion.

Routes …
Enumerationr/w
Enumerated Values:
1other
2reject
3local
4remote
 .1.3.6.1.4.1.164.11.9.3.1.8
rtrFwdProto
The routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that
hosts should support those protocols.
Enumeration
Enumerated Values:
1other
2local
3netmgmt
8rip
41lis
 .1.3.6.1.4.1.164.11.9.3.1.9
rtrFwdEthQueue
This object indicates the ETH Queue number.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.9.3.1.10
rtrFwdMetric1
The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
rtrFwdProto value. If this metric is not
used, its value should be set to -1.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.9.3.1.11

rtrPbrTable

table
.1.3.6.1.4.1.164.11.9.4 · 1 row entry · 15 columns
Open in standard view 
The Router's Forwarding Table.
rtrPbrEntry entry .1.3.6.1.4.1.164.11.9.4.1
An entry in the Router's Policy Based Routing (PBR) table.
Indexes
rtrPbrIdx rtrPbrInterface rtrPbrRuleIdx
Column Syntax OID
rtrPbrIdx
This object indicates the Router Index.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.9.4.1.1
rtrPbrInterface
Router interface for which this match-set
rule applies.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.164.11.9.4.1.2
rtrPbrRuleIdx
This object indicates the Policy Based Routing (PBR)
match-set rule index.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.9.4.1.3
rtrPbrRowStatus
This object enables the user to
create/delete entries of this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.9.4.1.4
rtrPbrMatchAllFrames
Forwarding decision is made regardless PBR Rule
(as if all conditions are matched)
Enumerationr/w
Enumerated Values:
1notApplicable
2no
3yes
 .1.3.6.1.4.1.164.11.9.4.1.5
rtrPbrSourceIpAddress
Received frame source IP Address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.9.4.1.6
rtrPbrSourceIpMask
The subnet mask of the source IP Address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.9.4.1.7
rtrPbrDestIpAddress
Received frame destination IP Address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.9.4.1.8
rtrPbrDestIpMask
The subnet mask of the destination IP Address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.9.4.1.9
rtrPbrIpProtocol
Value of Protocol field in IP Frame header.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.9.4.1.10
rtrPbrMinFrameLength
.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.9.4.1.11
rtrPbrMaxFrameLength
.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.9.4.1.12
rtrPbrDiscardFrame
Discard a frame when rule is matched .
Enumerationr/w
Enumerated Values:
1notApplicable
2no
3yes
 .1.3.6.1.4.1.164.11.9.4.1.13
rtrPbrForwardingInterface
The router Interface through which the frame
should be forwarded, when rule is matched.
If there's no forwarding interface,
then this object has a value of zero
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.164.11.9.4.1.14
rtrPbrNextHop
IP Address of Next Hop, when Forwarding Interface is LAN,
or has BridgePDU (BVI) encapsulation.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.11.9.4.1.15

rtrSourceAddressTable

table
.1.3.6.1.4.1.164.11.9.6 · 1 row entry · 5 columns
Open in standard view 
The Source Address Table.
rtrSourceAddressEntry entry .1.3.6.1.4.1.164.11.9.6.1
An entry in the Source Address Table.
Indexes
rtrSourceAddressApp rtrSourceAddressType rtrSourceAddress rtrSourceAddressIfIndex
Column Syntax OID
rtrSourceAddressApp
This object indicates the Application Type.
Enumeration
Enumerated Values:
1other
2trap
3loopback
4clock
255managementAll
 .1.3.6.1.4.1.164.11.9.6.1.1
rtrSourceAddressType
This object indicates the Address Type.
Value of 'unknown(0)' means that address is irrelevant.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.11.9.6.1.2
rtrSourceAddress
This object indicates the Address.
Value of '0' means that address is irrelevant.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.9.6.1.3
rtrSourceAddressIfIndex
This object indicates the ifIndex of the Interface,
whose address will be used.
Value of '0' means that ifIndex is irrelevant.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.9.6.1.4
rtrSourceAddressRowStatus
This object enables the user to create/delete entries in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.9.6.1.5

rtrRedistTable

table
.1.3.6.1.4.1.164.11.9.7 · 1 row entry · 5 columns
Open in standard view 
The table of rtr redistribution information entries.
This table is used to determine how routing information is
redistributed to routing protocol managers (RPMs) using rtr's
Routing Protocol Input interface.  The RPM to which the information
may be redistributed is called the destination RPM.  Routing
information is received from RPMs and from the MIB (for static
routes); these are referred to as the routing information source.
rtrRedistEntry entry .1.3.6.1.4.1.164.11.9.7.1
Information defining how routing information is redistributed
to routing protocol managers (RPMs)by rtr on its Routing
Protocol Input interface.

There are two key aspects to an entry in this table.
…
Indexes
rtrRedistAfiType rtrRedistSafi rtrRedistInfoSrc rtrRedistInfoDest
Column Syntax OID
rtrRedistAfiType
The AFI index into the rtr redistribute table.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.11.9.7.1.1
rtrRedistSafi
The SAFI index into the rtr redistribute table.
RtrSafi
Textual Convention: RtrSafi Enumeration
Type Values:
1unicast
2multicast
3both
128mplsBgpVpn
 .1.3.6.1.4.1.164.11.9.7.1.2
rtrRedistInfoSrc
The source of the routing information. This is one of:
- an RPM, joined to rtr on the Routing Protocol Input
interface
- statically defined routes, defined in the static routes
table
- connected routes, learnt…
InfoSourceDest
Textual Convention: InfoSourceDest Enumeration
Type Values:
0infoSourceAll
1infoSourceAllInclConnected
65536infoSourceOther
131072infoSourceConnected
196608infoSourceStatic
262144infoSourceIcmp
327680infoSourceEgp
393216infoSourceGgp
458752infoSourceHello
524288infoSourceRip
589824infoSourceIsis
655360infoSourceEsis
720896infoSourceIgrp
786432infoSourceBbnSpfIgp
851968infoSourceOspf
917504infoSourceBgp
983040infoSourceIdpr
1048576infoSourceEigrp
1114112infoSourceDvmrp
1179648infoSourceDdrp
 .1.3.6.1.4.1.164.11.9.7.1.3
rtrRedistInfoDest
The destination of the routing information. This is usually an
RPM, joined to rtr on the Routing Protocol Input
interface. It can also be set to 'all', meaning that this
entry applies to all routing information destin…
InfoSourceDest
Textual Convention: InfoSourceDest Enumeration
Type Values:
0infoSourceAll
1infoSourceAllInclConnected
65536infoSourceOther
131072infoSourceConnected
196608infoSourceStatic
262144infoSourceIcmp
327680infoSourceEgp
393216infoSourceGgp
458752infoSourceHello
524288infoSourceRip
589824infoSourceIsis
655360infoSourceEsis
720896infoSourceIgrp
786432infoSourceBbnSpfIgp
851968infoSourceOspf
917504infoSourceBgp
983040infoSourceIdpr
1048576infoSourceEigrp
1114112infoSourceDvmrp
1179648infoSourceDdrp
 .1.3.6.1.4.1.164.11.9.7.1.4
rtrRedistRowStatus
Used to create and delete a rtr redistribution table entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.9.7.1.5

rtrPolicyMainTable

table
.1.3.6.1.4.1.164.11.13.1 · 1 row entry · 6 columns
Open in standard view 
Router Policy Configuration Table.
rtrPolicyMainEntry entry .1.3.6.1.4.1.164.11.13.1.1
An entry in the Router Policy main table
Indexes
rtrPolicyName
Column Syntax OID
rtrPolicyName
Router Policy profile name
OctetString
Constraints:
range: 1-80
 .1.3.6.1.4.1.164.11.13.1.1.1
rtrPolicyNumberOfRules
Number of policy rule entries in this policy profile
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.13.1.1.2
rtrPolicyLastSeqeunceNumber
Sequence Number of the last Rule in this policy profile.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.13.1.1.3
rtrPolicyResequenceCmd
Resequence Command, specifying step between policy rule sequence numbers.
For example, when resequence command with value of 100 is given,
new sequence number will be 100 200 300 400 etc.
Default Value - 10. Possible S…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.13.1.1.4
rtrPolicyType
Router Policy profile type.
Enumerationr/w
Enumerated Values:
2bgpPrefixListIpv4
3bgpPrefixListIpv6
4bgpRouteMap
 .1.3.6.1.4.1.164.11.13.1.1.5
rtrPolicyRowStatus
Create/Destroy Router Policy profile.
When removing policy profile which has associated policy rule
entries, all associated entries (in rtrPolicyRuleTable and in
all auxiliary (per protocol) tables) MUST be removed be…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.13.1.1.6

rtrPolicyRuleTable

table
.1.3.6.1.4.1.164.11.13.2 · 1 row entry · 6 columns
Open in standard view 
Router policy rule Table
rtrPolicyRuleEntry entry .1.3.6.1.4.1.164.11.13.2.1
Policy rule entry - general policy rule parameters , and pointer to
Auxillary table.
Indexes
rtrPolicyRuleIdx
Column Syntax OID
rtrPolicyRuleIdx
Policy rule running Index .
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.13.2.1.1
rtrPolicyRuleName
The name of the policy profile to which this policy rule belongs.
Policy profile Name MUST exists in rtrPolicyMainTable.
Upon deletion of an policy profile, all entries with deleted
policy profile Name must be deleted.
OctetStringr/w
Constraints:
range: 1-252
 .1.3.6.1.4.1.164.11.13.2.1.2
rtrPolicyRuleSequenceNumber
Policy rule Sequence Number
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.13.2.1.3
rtrPolicyRuleType
This object specify policy rule type:
Remark, Deny or Permit.
Remark type policy rule must include pointer (rtrPolicyRulePointer)
to rtrPolicyRuleRemarkTable
Permit or Deny type policy rule must include pointer to one …
Enumerationr/w
Enumerated Values:
1remark
2deny
3permit
 .1.3.6.1.4.1.164.11.13.2.1.4
rtrPolicyRulePointer
Pointer to entry in one of the auxilary tables:
bgp route map table.
When an entry is created in this table,
Agent must create associated entry in one of the auxilary accroding
to this pointer
SNMPv2-TCRowPointerr/w
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.164.11.13.2.1.5
rtrPolicyRuleRowStatus
Create or Destroy router policy rule
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.13.2.1.6

rtrPolicyInvRuleTable

table
.1.3.6.1.4.1.164.11.13.3 · 1 row entry · 3 columns
Open in standard view 
Inverse table for Policy Rule Table.
This table is used for displaying policy rules ordered according their
sequence number.
rtrPolicyInvRuleEntry entry .1.3.6.1.4.1.164.11.13.3.1
Policy Rule Table inverse entry - general Policy Rule parameters,
indexed by policy profile Name and Sequence Number, used for display
sorted according to sequence number purpose.
Indexes
rtrPolicyName rtrPolicyRuleSequenceNumber
Column Syntax OID
rtrPolicyInvRuleIdx
Policy Rule running Index .
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.11.13.3.1.1
rtrPolicyInvRuleType
This object specify policy rule type:
Remark, Deny or Permit.
Remark type policy rule must include pointer (rtrPolicyRulePointer)
to rtrPolicyRuleRemarkTable
Permit or Deny type policy rule must include pointer to one …
Enumeration
Enumerated Values:
1remark
2deny
3permit
 .1.3.6.1.4.1.164.11.13.3.1.2
rtrPolicyInvRulePointer
Pointer to entry in one of the auxilary tables:
bgp route map table.
SNMPv2-TCRowPointer
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.164.11.13.3.1.3

rtrPolicyRuleRemarkTable

table
.1.3.6.1.4.1.164.11.13.4 · 1 row entry · 1 columns
Open in standard view 
Policy Rules remark Table.
This table containing all remarks (free text which may describe
Policy Rules) for all Policy Profiles
rtrPolicyRuleRemarkEntry entry .1.3.6.1.4.1.164.11.13.4.1
Policy Rules remarks
Indexes
rtrPolicyRuleIdx
Column Syntax OID
rtrPolicyRuleRemark
Free text describing following Policy Rules
OctetStringr/w
Constraints:
range: 1-252
 .1.3.6.1.4.1.164.11.13.4.1.1

dhcpRelayServerTable

table
.1.3.6.1.4.1.164.11.15.1.2 · 1 row entry · 4 columns
Open in standard view 
DHCP Relay Server Table.
dhcpRelayServerEntry entry .1.3.6.1.4.1.164.11.15.1.2.1
An entry in the DHCP Relay Server Table.
Indexes
dhcpRelayServerRtrIfIndex dhcpRelayServerAddrType dhcpRelayServerAddr
Column Syntax OID
dhcpRelayServerRtrIfIndex
The ifIndex of the Router Interface to which the
DHCP Relay Server is associated.
Value of 0x00000001 represents a server definition
per router entity, serving all router interfaces.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.164.11.15.1.2.1.1
dhcpRelayServerAddrType
The address type of IP Address associated to the
DHCP Relay Server.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.11.15.1.2.1.2
dhcpRelayServerAddr
The IP address associated to the DHCP Relay Server.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.11.15.1.2.1.3
dhcpRelayServerRowStatus
This object enables the user to create/delete
entries of this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.11.15.1.2.1.4

rtrRibTable

table
.1.3.6.1.4.1.164.11.16.1 · 1 row entry · 11 columns
Open in standard view 
Router entity RIB (Routing Information Base) table.
rtrRibEntry entry .1.3.6.1.4.1.164.11.16.1.1
Route entry in Router entity RIB table.
Indexes
rtrRibDestType rtrRibDest rtrRibDestLen rtrRibTos rtrRibNextHopType rtrRibNextHop rtrRibIfIndex rtrRibProto rtrRibRpmIndex
Column Syntax OID
rtrRibDestType
The type of the address used as the destination IP address
for this route.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.11.16.1.1.1
rtrRibDest
Destination internetwork address or subnet address. The
destination prefix length is applied to this value, and to a
particular destination address, to determine whether the route
applies to the particular address.
…
OctetString
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.164.11.16.1.1.2
rtrRibDestLen
Prefix length (in bits) to apply to the rtmRibDest object,
to obtain the set of addresses to which this route applies.

If the prefix length is L, then applying the length to an address
means taking the fi…
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.164.11.16.1.1.3
rtrRibTos
The policy specifier is the IP TOS Field. The encoding
of IP TOS is as specified by the following convention.
Zero indicates the default path if no more specific
policy applies.

+=====+=====+=====+=====+…
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.164.11.16.1.1.4
rtrRibNextHopType
The type of the address used as the next-hop address
for this route.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.11.16.1.1.5
rtrRibNextHop
On remote routes, the address of the next system en route;
Otherwise, zero.
OctetString
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.164.11.16.1.1.6
rtrRibIfIndex
The ifIndex value which identifies the local
interface through which the next hop of this
route should be reached.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.164.11.16.1.1.7
rtrRibProto
The routing mechanism via which this route was learned. Inclusion
of values for gateway routing protocols is not intended to imply that
hosts should support those protocols.
IANA-RTPROTO-MIBIANAipRouteProtocol
Textual Convention: IANA-RTPROTO-MIBIANAipRouteProtocol Enumeration
Type Values:
1other
2local
3netmgmt
4icmp
5egp
6ggp
7hello
8rip
9isIs
10esIs
11ciscoIgrp
12bbnSpfIgp
13ospf
14bgp
15idpr
16ciscoEigrp
17dvmrp
18rpl
19dhcp
20ttdp
 .1.3.6.1.4.1.164.11.16.1.1.8
rtrRibRpmIndex
The HAF entity index for the RPM that supplied this route,
or zero for static routes or automatically configured routes.
This is used to distinguish routes in the system where
multiple copies of a given protocol (for ex…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.164.11.16.1.1.9
rtrRibMetric1
The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
rtmRibProto value. If this metric is not used,
its value is returned as -1.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.11.16.1.1.10
rtrRibFibRoute
Flag indicating whether or not this route has been
programmed either to a forwarding table, or to a partner
that queries route information (such as BGP or PIM).

If there is no forwarding table and no part…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.164.11.16.1.1.11