RAD-Services-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
24
Rows
24
Columns
225

wfqTable

table
.1.3.6.1.4.1.164.6.3.1.1 · 1 row entry · 9 columns
Open in standard view 
This table allows user to define several
WFQ tables per output port.
          
WFQ supports flows with different bandwidth requirements 
by giving each queue a weight that assigns it 
a different percentage of output port bandwidth.
          
When Weighted Fair Queuing is used, 
it is possible to precisely attribute bandwidth 
partitioning among the queues. 
When there is congestion, each class (queue) 
is not allowed to use more bandwidth than the amount 
allocated to it.
wfqEntry entry .1.3.6.1.4.1.164.6.3.1.1.1
An entry in the Weighted Fair Queueing table.
Indexes
wfqCnfgIdx wfqPrtIdx wfqTblIdx wfqQueueIdx
Column Syntax OID
wfqCnfgIdx
This object indicates the Idx of the Agent Cnfg the following
objects refer.
255=Temporary Cnfg (when relevant,
Set is done only to this configuration).
For Agents that support only one configuration,
this object wil…
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.6.3.1.1.1.1
wfqPrtIdx
This object indicates a unique port or interface number,
for which Weighted Fair Queueing table is applicable .
For numbering, see product's spec.
For some products, the numbering can equal ifIndex.
Value of 255 (not …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.6.3.1.1.1.2
wfqTblIdx
This object indicates which Weighted Fair Queueing (WFQ)
Table is being used. There can be several tables.
For FCD-155 User will select which one will be used
for a virtual concatenation group.Valid values are 1,2
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.6.3.1.1.1.3
wfqQueueIdx
This object indicates a queue index.
For FCD-155, valid queues are 1..3.
The 4th queue is not in MIB.
Its weight will be RO, Calculated according to
the sum of the 3 first queues.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.6.3.1.1.1.4
wfqRowStatus
This object enables Creation/Deletion of
rows in the WFQ table.
For FCD-155, rows are not created nor destroyed by user.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.1.1.1.5
wfqWeightValue
This object indicates a relative weight value.
User should make sure that the sum of
values for all queues will not exceed 100%
(sum should be BELOW 100% in order
to leave some BW percentage for last queue)
Note th…
%Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.164.6.3.1.1.1.6
wfqSchedulingMode
This object controls which scheduling mode is used:
Weighted Fair Queuing (WFQ) scheme or priority Queue (Strict Priority).
Enumerationr/w
Enumerated Values:
2disable
3enable
 .1.3.6.1.4.1.164.6.3.1.1.1.7
wfqMinRateAbsolute
The minimum absolute rate, in kbps,
that should be allocated to this queue.
If the value is zero, then there is effectively
no minimum rate guarantee.
If the value is non-zero, then the servicing of
this queue in at…
KbpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.1.1.1.8
wfqMaxPacketSize
The size of the largest packet which can be received
on this queue, specified in octets.
Packets larger than this size will be discarded.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.1.1.1.9

dscpMappingTable

table
.1.3.6.1.4.1.164.6.3.2.1 · 1 row entry · 3 columns
Open in standard view 
Mapping of DSCP value to a regenerated priority level.
dscpMappingEntry entry .1.3.6.1.4.1.164.6.3.2.1.1
An entry in dscpMappingTable.
Indexes
dscpMappingCnfgIdx dscpMappingDscpIdx
Column Syntax OID
dscpMappingCnfgIdx
This object indicates the Idx of the Agent Cnfg the following
objects refer to.
255=Temporary Cnfg (when relevant, Set is done only
to this configuration).
For Agents that support only one configuration,
this object …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.164.6.3.2.1.1.1
dscpMappingDscpIdx
DSCP value of the incoming IP packet
Dscp
Textual Convention: Dscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.164.6.3.2.1.1.2
dscpMappingRegenPriority
The Regenerated Priority level the
incoming DSCP value is mapped to.
For FCD-155, valid values are 0,1,2,3
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.6.3.2.1.1.3

ifTeQosTable

table
.1.3.6.1.4.1.164.6.3.3.1 · 1 row entry · 6 columns
Open in standard view 
The TE QOS Interface Table.
ifTeQosEntry entry .1.3.6.1.4.1.164.6.3.3.1.1
An entry in the TE QOS Interface table.
Indexes
ifTeQosIdx1 ifTeQosIdx2 ifTeQosIdx3
Column Syntax OID
ifTeQosIdx1
This object indicates the 1st Index of the table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.6.3.3.1.1.1
ifTeQosIdx2
This object indicates the 2nd Index of the table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.6.3.3.1.1.2
ifTeQosIdx3
This object indicates the 3rd Index of the table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.6.3.3.1.1.3
ifTeQosParam
This object is used for QOS attributes
of the entry's entities.
OctetStringr/w .1.3.6.1.4.1.164.6.3.3.1.1.4
ifTeQosParam2
This object is used for 2nd group QOS attributes
of the entry's entities.
OctetStringr/w .1.3.6.1.4.1.164.6.3.3.1.1.5
ifTeQosStatus
This object is used to create, activate and
destroy entries of this table.
Enumerationr/w
Enumerated Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.164.6.3.3.1.1.6

prtPriorityTable

table
.1.3.6.1.4.1.164.6.3.4.1 · 1 row entry · 4 columns
Open in standard view 
A table - Parameters per port per Priority .
prtPriorityEntry entry .1.3.6.1.4.1.164.6.3.4.1.1
An entry in table.
Indexes
prtPriorityIdx1 prtPriorityPrtIdx prtPriorityIdx
Column Syntax OID
prtPriorityIdx1
This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg. or any other Index.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.6.3.4.1.1.1
prtPriorityPrtIdx
This object indicates a unique Port Index.
Refer to device specification for port Index.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.164.6.3.4.1.1.2
prtPriorityIdx
This object indicates the Traffic Priority Index.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.6.3.4.1.1.3
prtPriorityIngressRateLimit
The maximum rate permitted at Ingress of
this port with this Traffic Priority, in Kbps.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.6.3.4.1.1.4

prtQosTable

table
.1.3.6.1.4.1.164.6.3.4.2 · 1 row entry · 8 columns
Open in standard view 
Port QoS (Quality of Service) table.
prtQosEntry entry .1.3.6.1.4.1.164.6.3.4.2.1
An entry in table.
Indexes
prtQosIdx prtQosPrtIdx prtQosDirection
Column Syntax OID
prtQosIdx
The first index of the table.
This attribute might indicate the Idx of the Cnfg (1..255) being
accessed ; Idx of 255 relates to the TmpCnfg or any other Index.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.4.2.1.1
prtQosPrtIdx
This object indicates a unique Port Index.
Refer to device specification for port Index.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.4.2.1.2
prtQosDirection
This object indicates the port's QoS Direction.
Enumeration
Enumerated Values:
1all
2ingress
3egress
 .1.3.6.1.4.1.164.6.3.4.2.1.3
prtQosRateLimitPacketType
This object indicates the Type of Packets on which Rate Limitation is applied.
Enumerationr/w
Enumerated Values:
1all
2bcastAndMcastAndFloodedUcast
3bcastAndMcast
4bcast
 .1.3.6.1.4.1.164.6.3.4.2.1.4
prtQosRateLimitCIR
This object indicates the port's CIR (Committed Information Rate) in Kbps.
Value=0 represents best effort.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.4.2.1.5
prtQosRateLimitCBS
This object indicates the port's CBS (Committed Burst Size) in KB.
Value=0 represents best effort.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.4.2.1.6
prtQosRateLimitEIR
This object indicates the port's EIR (Excess Information Rate) in Kbps.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.4.2.1.7
prtQosRateLimitEBS
This object indicates the port's EBS (Excess Burst Size) in KB.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.4.2.1.8

portTrafficClassTable

table
.1.3.6.1.4.1.164.6.3.5.1 · 1 row entry · 3 columns
Open in standard view 
Mapping of port to Traffic Class level.
portTrafficClassEntry entry .1.3.6.1.4.1.164.6.3.5.1.1
An entry in portTrafficClassTable.
Indexes
portTrafficClassIdx1 portTrafficClassPortIdx
Column Syntax OID
portTrafficClassIdx1
This attribute indicates the 1st index of the table.
This may be the Idx of the Cnfg(1..255) being accessed;
Idx of 255 relates to the TmpCnfg, or any other Index.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.6.3.5.1.1.1
portTrafficClassPortIdx
This object indicates a unique Port Index.
Refer to device specification for port Index.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.164.6.3.5.1.1.2
portTrafficClass
This object indicates the Traffic Class level of this port.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.6.3.5.1.1.3

serviceTable

table
.1.3.6.1.4.1.164.6.3.6 · 1 row entry · 5 columns
Open in standard view 
Table of services.
serviceEntry entry .1.3.6.1.4.1.164.6.3.6.1
An entry in the Service Table.
Indexes
IF-MIBifIndex flowIndex serviceIndex
Column Syntax OID
flowIndex
Defines the Flow ID the service is associated to.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.6.1.1
serviceIndex
Defines the Service ID - according to the CoS.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.6.1.2
serviceRowStatus
This attribute is used to create a new row or to delete an existing
row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.6.1.3
serviceName
This attribute defines the service name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.6.3.6.1.4
serviceBwProfileId
This variable holds the index of the Ingress BW profile assigned
to that service.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.6.1.5

evcCosTable

table
.1.3.6.1.4.1.164.6.3.7 · 1 row entry · 5 columns
Open in standard view 
This table defines  mapping of Ethernet Virtual Connection 
(EVC) ID to Class of Service (CoS) ID
evcCosEntry entry .1.3.6.1.4.1.164.6.3.7.1
An entry in table.
Indexes
evcCosCnfgIdx evcCosEvcIdx
Column Syntax OID
evcCosCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.6.3.7.1.1
evcCosEvcIdx
This attribute indicates EVC Id.
Unsigned32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.164.6.3.7.1.2
evcCosRowStatus
This attribute allows to create/delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.7.1.3
evcCosEvcName
A string that identifies the EVC. It should be unique
in the Maintenance Domain (i.e., in the managed network)
Used as MEG ID field in OAM messages.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.6.3.7.1.5
evcCosSpVlanId
This object indicates the SP (Service Provider) VLAN used when sending
an OAM message for the specified EVC.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.7.1.6

serviceStatTable

table
.1.3.6.1.4.1.164.6.3.8 · 1 row entry · 26 columns
Open in standard view 
Service statistics table.
serviceStatEntry entry .1.3.6.1.4.1.164.6.3.8.1
An entry in the Service Statistics Table.
Indexes
IF-MIBifIndex flowIndex serviceIndex serviceStatDirection
Column Syntax OID
serviceStatDirection
The direction in which the measurement is taken.
Enumeration
Enumerated Values:
1upstream
2downstream
255notApplicable
 .1.3.6.1.4.1.164.6.3.8.1.1
srvForwardGreenPackets
This attribute displays the counted number of forwarded packets
that where marked Green.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.2
srvForwardGreenPacketsOverflow
This attribute displays the number of times that the
forwardGreenPackets counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.3
srvForwardYellowPackets
This attribute displays the counted number of forwarded packets
that where marked Yellow.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.4
srvForwardYellowPacketsOverflow
This attribute displays the number of times that the
forwardYellowPackets counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.5
srvDiscardGreenPackets
This attribute displays the counted number of discarded packets
that where marked Green.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.6
srvDiscardGreenPacketsOverflow
This attribute displays the number of times that the
discardGreenPacket counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.7
srvDiscardYellowRedPackets
This attribute displays the counted number of discarded packets
that where marked Yellow or Red.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.8
srvDiscardYellowRedPacketsOverflow
This attribute displays the number of times that the
discardYellowRedPackets counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.9
srvForwardGreenBytes
This attribute displays the counted number of forwarded bytes
that where marked Green.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.10
srvForwardGreenBytesOverflow
This attribute displays the number of times that the
forwardGreenBytes counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.11
srvForwardYellowBytes
This attribute displays the counted number of forwarded bytes
that where marked Yellow.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.12
srvForwardYellowBytesOverflow
This attribute displays the number of times that the
forwardYellowBytes counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.13
srvDiscardGreenBytes
This attribute displays the counted number of discarded bytes
that where marked Green.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.14
srvDiscardGreenBytesOverflow
This attribute displays the number of times that the
discardGreenBytes counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.15
srvDiscardYellowRedBytes
This attribute displays the counted number of discarded bytes
that where marked Yellow or Red.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.16
srvDiscardYellowRedBytesOverflow
This attribute displays the number of times that the
discardYellowRedBytes counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.17
srvResetStatsCmd
Reset statistic counters of the service.
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.6.3.8.1.18
srvDiscardYellowPackets
This attribute displays the counted number of discarded packets
that where marked Yellow.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.19
srvDiscardYellowPacketsOverflow
This attribute displays the number of times that the
discardYellowPackets counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.20
srvDiscardYellowBytes
This attribute displays the counted number of discarded bytes
that where marked Yellow.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.21
srvDiscardYellowBytesOverflow
This attribute displays the number of times that the
discardYellowBytes counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.22
srvDiscardRedPackets
This attribute displays the counted number of discarded packets
that where marked Red.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.23
srvDiscardRedPacketsOverflow
This attribute displays the number of times that the
discardRedPackets counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.24
srvDiscardRedBytes
This attribute displays the counted number of discarded bytes
that where marked Red.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.25
srvDiscardRedBytesOverflow
This attribute displays the number of times that the
discardRedBytes counter has overflowed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.8.1.26

flowMappingProfileTable

table
.1.3.6.1.4.1.164.6.3.9.1 · 1 row entry · 7 columns
Open in standard view 
This table holds flow mapping profiles.
flowMappingProfileEntry entry .1.3.6.1.4.1.164.6.3.9.1.1
Each entry in this table describes one Flow mapping profile with
one of its Flow Mapping supported, according to the Priority order.
The information includes a reference to a Flow Mapping index.
Indexes
flowMappingProfileIndex flowMappingProfilePriority
Column Syntax OID
flowMappingProfileIndex
A running index for the Flow Mapping Profile table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.1.1.1
flowMappingProfilePriority
The priority of the selected Mapping.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.6.3.9.1.1.2
flowMappingProfileRowStatus
This attribute is used to create a new row or to delete an
existing row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.9.1.1.3
flowMappingProfileNumOfMaps
This attribute determines the number of the mappings
associated to the Flow Mapping Profile.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.1.1.4
flowMappingProfileMapIndex deprecated
This attribute holds a reference to the mapping index.
It specifies the mapping selected for the Mapping Profile
for the selected Priority.
When flowMappingProfileNumOfMaps=0, this attribute is not
relevant.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.1.1.5
flowMappingProfileName
This attribute defines the name assigned to flowMappingIndex profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.6.3.9.1.1.6
flowMappingProfileCondition
This attribute defines the condition between the mappings/rules
associated to this Flow Mapping Profile.
Enumerationr/w
Enumerated Values:
2or
3and
 .1.3.6.1.4.1.164.6.3.9.1.1.7

qosFlowMappingTable

table
.1.3.6.1.4.1.164.6.3.9.2 · 1 row entry · 33 columns
Open in standard view 
A table of Flow Mapping.
qosFlowMappingEntry entry .1.3.6.1.4.1.164.6.3.9.2.1
Each entry in this table describes one Flow Mapping.
The information includes combination (AND function) of all the
classifications, as defined in the qosFlowMappingCriteria field.
Classifiers are: TOS, DSCP, VLAN ID, M…
Indexes
qosFlowMappingIdx1 qosFlowMappingIdx2 qosFlowMappingIdx3
Column Syntax OID
qosFlowMappingIdx1
- In case the table is accessed via flowMappingProfileTable
this is a running index for the QoS Flow Mapping table.
- In case the table is not accessed via flowMappingProfileTable,
this will be the ifIndex of the XNI (b…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.1
qosFlowMappingIdx2
An index for the QoS Flow Mapping table.
- In case the table is accessed via flowMappingProfileTable
the index will be fixed = 1.
- In case the table is not accessed via flowMappingProfileTable,
this will be the index o…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.2
qosFlowMappingIdx3
An index for the QoS Flow Mapping table.
- In case the table is accessed via flowMappingProfileTable
the index will be fixed = 1.
- In case the table is not accessed via flowMappingProfileTable,
this will be the Priorit…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.3
qosFlowMappingRowStatus
This attribute is used to create a new row or to delete an existing
row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.9.2.1.4
qosFlowMappingCriteria
This attribute determines upon which criterion the flow
will be mapped.
Bitsr/w
Enumerated Values:
0ieee802dot1p
1tos
2dscp
3vlanId
4macSrcAddr
5macDestAddr
6ipSrcAddr
7ipDestAddr
8tcpSrcPort
9tcpDestPort
10udpSrcPort
11udpDestPort
12ipPrecedence
13innerIeee802dot1p
14innerVlanId
15untagged
16nonIP
17etherType
18myMac
19myIp
 .1.3.6.1.4.1.164.6.3.9.2.1.5
qosFlowMappingIeee802dot1p
This attribute determines which TOS values are applicable for that
flow.
Each bit (0..7) represents a different 802.1 P-bit value.
Setting '1' to the bit means that the corresponding 802.1 P-bit value
is applicable.
It …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.6
qosFlowMappingTos
This attribute determines which TOS values are applicable for that
flow.
Each bit (0..7) represents a different TOS value.
Setting '1' to the bit means that the corresponding TOS value is
applicable.
It is relevant only…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.7
qosFlowMappingFromDscp
This attribute determines the first DSCP value to compare with
in a range.
It is relevant only in case the dscp bit (2) in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.8
qosFlowMappingToDscp
This attribute determines the first DSCP value to compare with in
a range.
It is relevant only in case the dscp bit (2) in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.9
qosFlowMappingFromVlanId
This attribute determines the first VLAN ID value to compare with
in a range.
It is relevant only in case the vlanId bit (3) in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.10
qosFlowMappingToVlanId
This attribute determines the last VLAN ID value to compare with
in a range.
It is relevant only in case the vlanId bit (3) in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.11
qosFlowMappingFromSrcMacAddr
This attribute determines the first source MAC address to compare
with in a range.
It is relevant only in case the macSrcAddr bit (4) in
qosFlowMappingCriteria equals 1.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.6.3.9.2.1.12
qosFlowMappingToSrcMacAddr
This attribute determines the last source MAC address to compare
with in a range.
It is relevant only in case the macSrcAddr bit (4) in
qosFlowMappingCriteria equals 1.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.6.3.9.2.1.13
qosFlowMappingFromDestMacAddr
This attribute determines the first destination MAC address to
compare with in a range.
It is relevant only in case the macDestAddr (5) bit in
qosFlowMappingCriteria equals 1.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.6.3.9.2.1.14
qosFlowMappingToDestMacAddr
This attribute determines the last destination MAC address to
compare with in a range.
It is relevant only in case the macDestAddr (5) bit in
qosFlowMappingCriteria equals 1.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.6.3.9.2.1.15
qosFlowMappingFromSrcIpAddr deprecated
This attribute determines the first source IP address to compare
with in a range.
It is relevant only in case the ipSrcAddr (6) bit in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.6.3.9.2.1.16
qosFlowMappingToSrcIpAddr deprecated
This attribute determines the last source IP address to compare
with in a range.
It is relevant only in case the ipSrcAddr (6) bit in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.6.3.9.2.1.17
qosFlowMappingFromDestIpAddr deprecated
This attribute determines the first destination IP address to
compare with in a range.
It is relevant only in case the ipDestAddr (7) bit in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.6.3.9.2.1.18
qosFlowMappingToDestIpAddr deprecated
This attribute determines the last destination IP address to
compare with in a range.
It is relevant only in case the ipDestAddr (7) bit in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.6.3.9.2.1.19
qosFlowMappingFromTcpSrcPort
This attribute determines the first TCP source port to compare with in a range.
It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.20
qosFlowMappingToTcpSrcPort
This attribute determines the last TCP source port to compare with in a range.
It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.21
qosFlowMappingFromTcpDestPort
This attribute determines the first TCP destination port to compare with in a range.
It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.22
qosFlowMappingToTcpDestPort
This attribute determines the last TCP destination port to compare with in a range.
It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.23
qosFlowMappingFromUdpSrcPort
This attribute determines the first UDP source port to compare with in a range.
It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.24
qosFlowMappingToUdpSrcPort
This attribute determines the last UDP source port to compare with in a range.
It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.25
qosFlowMappingFromUdpDestPort
This attribute determines the first UDP destination port to compare with in a range.
It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.26
qosFlowMappingToUdpDestPort
This attribute determines the last UDP destination port to compare with in a range.
It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.27
qosFlowMappingFromIpPrecedence
This attribute determines the first IpPrecedence value to compare
with in a range.
It is relevant only in case the IpPrecedence bit (12) in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.28
qosFlowMappingToIpPrecedence
This attribute determines the last IpPrecedence value to compare
with in a range.
It is relevant only in case the IpPrecedence bit (12) in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.29
qosFlowMappingInnerIeee802dot1p
This attribute determines which TOS values are applicable for that
flow.
Each bit (0..7) represents a different inner 802.1 P-bit value.
Setting '1' to the bit means that the corresponding inner 802.1
P-bit value is app…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.30
qosFlowMappingFromInnerVlanId
This attribute determines the first inner VLAN ID value to compare
with in a range.
It is relevant only in case the innerVlanId bit(14) in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.31
qosFlowMappingToInnerVlanId
This attribute determines the last inner VLAN ID value to compare
with in a range.
It is relevant only in case the innerVlanId bit(14) in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.32
qosFlowMappingEtherType
Determines the Tag Protocol Identifier (in Hex).
For example:
0x8100 (C-TAG)
0x88A8 (S-TAG)
It is relevant only in case the etherType bit (17) in
qosFlowMappingCriteria equals 1.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.9.2.1.33

cosProfileTable

table
.1.3.6.1.4.1.164.6.3.10 · 1 row entry · 5 columns
Open in standard view 
Class of Service Profile table.
Each profile holds a priority method, and a mapping function
that maps the priority values (range according to the method)
into CoS values.
cosProfileEntry entry .1.3.6.1.4.1.164.6.3.10.1
A conceptual row where each row contains one CoS attributes.
Indexes
cosProfileIndex
Column Syntax OID
cosProfileIndex
Defines the CoS Profile ID.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.10.1.1
cosProfileRowStatus
This attribute is used to create a new row or to delete an existing row
in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.10.1.2
cosProfileCosMethod
Defines the priority method upon CoS mapping is done.
ProfileMethodr/w
Textual Convention: ProfileMethod Enumeration
Type Values:
2ieee802dot1p
3tos
4dscp
5ipPrecedence
6userPorts
7internalCos
8dei
 .1.3.6.1.4.1.164.6.3.10.1.3
cosProfileName
This attribute defines the name assigned to CoS profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.6.3.10.1.4
cosProfileCosMapping
This attribute defines the value of the CoS that is assigned
for each priority. The number of the valid octets depends upon
the priority method selected:
Octet 0 corresponds to priority = 0
Octet 1 corresponds to priori…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.164.6.3.10.1.5

qProfileTable

table
.1.3.6.1.4.1.164.6.3.11.1 · 1 row entry · 5 columns
Open in standard view 
This table defines the profiles for a cluster of queues.
qProfileEntry entry .1.3.6.1.4.1.164.6.3.11.1.1
A conceptual row where each row contains one Queue Cluster attribute.
Indexes
qProfileIndex
Column Syntax OID
qProfileIndex
Defines the Queue Cluster Profile ID.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.1.1.1
qProfileRowStatus
This attribute is used to create a new row or to delete an existing
row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.11.1.1.2
qProfileName
This attribute holds the name of the Queue cluster profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.6.3.11.1.1.3
qProfileNumberOfInternalQ
This attribute holds the number of the internal queue profiles
that are pointed by qProfileInternalQProfile.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.1.1.4
qProfileInternalQProfile
This attribute is a vector that holds the indices to the
queue profiles in the qInternalProfileTable. The index
length depends on specific product realization and may equal
two or four octets.
OctetStringr/w .1.3.6.1.4.1.164.6.3.11.1.1.5

qInternalProfileTable

table
.1.3.6.1.4.1.164.6.3.11.2 · 1 row entry · 12 columns
Open in standard view 
This table holds queue profiles.
qInternalProfileEntry entry .1.3.6.1.4.1.164.6.3.11.2.1
A conceptual row where each row contains one Queue attribute.
Indexes
qInternalProfileIndex
Column Syntax OID
qInternalProfileIndex
Defines the Queue Profile ID.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.2.1.1
qInternalProfileRowStatus
This attribute is used to create a new row or to delete an existing
row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.11.2.1.2
qInternalProfileScheduling
This attribute determines the queue scheduling method.
Enumerationr/w
Enumerated Values:
1wfq
2strict
3bestEffort
 .1.3.6.1.4.1.164.6.3.11.2.1.3
qInternalProfileWFQWeight
This attribute determines the weight that each WFQ
(Weighted Fair Queue) participant gets.
It is applicable only when scheduling is configured to WFQ.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.2.1.4
qInternalProfileQueueLength
This attribute determines the length of the queue.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.2.1.5
qInternalProfileWredStartDropThresh deprecated
This attribute determines the length that the queue (Start Value)
must reach before the packets colored yellow will start being dropped
by the WRED (Weighted Random Early Detection/Discard) mechanism.
WRED is one the mo…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.2.1.6
qInternalProfileWredDropAllThresh deprecated
This attribute determines the length that the queue (Stop Value)
must reach before the WRED (Weighted Random Early Detection)
shaper mechanism stops dropping randomly,
and just drops all further packets marked as yellow.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.2.1.7
qInternalProfileWredDropProbability deprecated
This attribute determines the percentage of packets that are being
dropped at the point when the length of the queue reaches the Stop
value.
So, effectively, this defines how quickly the rate of dropping packet
must inc…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.2.1.8
qInternalProfileRateLimit
This attribute determines the Rate Limit of the queue in Kbps.
Value=0 represents best effort.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.2.1.9
qInternalProfileShaperProfile
This attribute defines the Shaper Profile
(bwProfileIndex from bwProfileTable) assigned to this qInternalProfile.
Valid range of bwProfileIndex for Shaper
Profiles index starts from 0x8000001.
If set to '0', no profile…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.2.1.10
qInternalProfileWredProfile
This attribute defines the WRED Profile
(wredProfileIndex from wredProfileTable) assigned to this
qInternalProfile.
If set to '0', no profile is assigned to this qInternalProfile.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.2.1.11
qInternalProfileFrameBuffers
This attribute determines the number of frame buffers assigned
to a queue.
Unsigned32r/w
Constraints:
range: 0-16384
 .1.3.6.1.4.1.164.6.3.11.2.1.13

queueGroupTable

table
.1.3.6.1.4.1.164.6.3.11.3 · 1 row entry · 9 columns
Open in standard view 
This table defines the queue groups/blocks,their level and connections
between them.
queueGroupEntry entry .1.3.6.1.4.1.164.6.3.11.3.1
A conceptual row where each row contains one Queue group.
Indexes
queueGroupName queueGroupQBlockLevel queueGroupQBlockIdx
Column Syntax OID
queueGroupName
Defines the Queue Group unique name.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.164.6.3.11.3.1.1
queueGroupQBlockLevel
This attribute holds the Level of the Queue Block. First level is 1.
NA=2^32-1.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.3.1.2
queueGroupQBlockIdx
This attribute holds the ID of the Queue Block.
NA=2^32-1.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.3.1.3
queueGroupRowStatus
This attribute is used to create a new row or to delete an existing
row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.11.3.1.4
queueGroupQBlockProfile
This attribute defines the Queue profile assigned to this Queue Block.
This object points to qProfileIndex in qProfileTable.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.3.1.5
queueGroupQBlockShaperProfile
This attribute defines the Shaper profile assigned to this Queue
Block.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.3.1.6
queueGroupPointToQBlock
This attribute defines the Queue Block name of the next Queue Block
level that is pointed by this Queue Block.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.164.6.3.11.3.1.7
queueGroupPointToInternalQueue
This attribute defines the internal queue within
queueGroupPointToQBlock that is pointed by this Queue Block.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.11.3.1.8
queueGroupQBlockName
This attribute holds the name of the Queue Block.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.164.6.3.11.3.1.9

markingProfileTable

table
.1.3.6.1.4.1.164.6.3.12 · 1 row entry · 10 columns
Open in standard view 
Marking profile table. Each profile holds a marking function
which converts CoS values to Service Provider priority values.
markingProfileEntry entry .1.3.6.1.4.1.164.6.3.12.1
A conceptual row where each row contains one Marking attribute.
Indexes
markingProfileIndex
Column Syntax OID
markingProfileIndex
Defines the Marking Profile ID.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.12.1.1
markingProfileRowStatus
This attribute is used to create a new row or to delete an existing
row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.12.1.2
markingProfileName
This attribute defines the unique name assigned to the marking profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.6.3.12.1.3
markingSpVlanPBit
This attribute defines the value of the SP VLAN P-bit that is assigned
for each frame according to the value of markingProfileMethod parameter :

Octet 0 corresponds to value 0 of P-bit/DSCP/TOS/IP Preced…
OctetStringr/w
Constraints:
range: 192-192
 .1.3.6.1.4.1.164.6.3.12.1.4
markingProfileMethod
This attribute defines the method that marking is done with.
ProfileMethodr/w
Textual Convention: ProfileMethod Enumeration
Type Values:
2ieee802dot1p
3tos
4dscp
5ipPrecedence
6userPorts
7internalCos
8dei
 .1.3.6.1.4.1.164.6.3.12.1.5
markingProfileColorAware
This parameter will be supported only for products that support priority
marking according to the policer color (e.g ETX-202A FROM R1.67):
This attribute defines the supported colors for devices that support
priority m…
Bitsr/w
Enumerated Values:
0green
1yellow
2red
 .1.3.6.1.4.1.164.6.3.12.1.6
markingProfileDeiAware
This attribute defines the DEI usage.
aware - Profile include DEI mapping - setting the DEI according to its
color, map each priority to specific DEI
notAware - Profile doesn't include DEI mapping.
alwaysGree…
Enumerationr/w
Enumerated Values:
1aware
2notAware
3alwaysGreen
4alwaysYellow
5byPolicer
 .1.3.6.1.4.1.164.6.3.12.1.7
markingProfileDeiColor
This attribute defines the DEI bit value that is assigned
for each frame according to the markingProfileMethod value:

Octet 0 corresponds to value 0 of P-bit/DSCP/TOS/IP Precedence.
Octet 1 corresponds to…
OctetStringr/w
Constraints:
range: 192-192
 .1.3.6.1.4.1.164.6.3.12.1.8
markingProfileDscpColor
The input DSCP value marked according to the policer color.

The first 64 octets are for frames that their policer color is Green
(octets 0-63 correspond to input DSCP values 0-63).
The next 64 octets are …
OctetStringr/w
Constraints:
range: 128-128
 .1.3.6.1.4.1.164.6.3.12.1.9
markingProfileMarkedField
This attribute indicates which field in the outgoing frame is modified
by this profile.

The values userPorts(6) and internalCos(7) are not applicable for this
object.
ProfileMethodr/w
Textual Convention: ProfileMethod Enumeration
Type Values:
2ieee802dot1p
3tos
4dscp
5ipPrecedence
6userPorts
7internalCos
8dei
 .1.3.6.1.4.1.164.6.3.12.1.10

wredProfileTable

table
.1.3.6.1.4.1.164.6.3.13 · 1 row entry · 7 columns
Open in standard view 
This table holds WRED(Weighted Random Early Detection/Discard)
profiles.
wredProfileEntry entry .1.3.6.1.4.1.164.6.3.13.1
An entry in the WRED profile Table.
Indexes
wredProfileIndex wredProfileColor
Column Syntax OID
wredProfileIndex
Defines the WRED Profile ID.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.13.1.1
wredProfileColor
Defines the color of the packets that their WRED thresholds are
defined in this profile.
Enumeration
Enumerated Values:
2green
3yellow
4red
 .1.3.6.1.4.1.164.6.3.13.1.2
wredProfileRowStatus
This attribute is used to create a new row or to delete an existing
row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.13.1.3
wredProfileName
This attribute defines the unique name assigned to the WRED profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.6.3.13.1.4
wredProfileMinThreshold
This attribute determines the queue usage minimum threshold in
percent.
Above it the packets colored yellow will start being dropped
by the WRED (Weighted Random Early Detection/Discard) mechanism.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.13.1.5
wredProfileMaxThreshold
This attribute determines the queue usage maximum threshold in
percent.
Above it shaper mechanism stops dropping randomly,
and just drops all further packets marked as yellow.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.13.1.6
wredProfileMaxProbability
This attribute determines the percentage of packets to be dropped
at the point when the queue usage reaches wredProfileMaxThreshold.
The behavior is linear, so that up to wredProfileMinThreshold no
packets are dropped (…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.13.1.7

sviTable

table
.1.3.6.1.4.1.164.6.3.14 · 1 row entry · 2 columns
Open in standard view 
Service Virtual Interface (SVI) Table.
          
This table holds SVI specific parameters and is augmenting the
generic attributes of the IF-MIB.
sviEntry entry .1.3.6.1.4.1.164.6.3.14.1
An entry in the SVI Table.

An entry is automatically created by the agent when a new SVI is
defined in the ifCreateTable.
Indexes
sviIndex
Column Syntax OID
sviIndex
This object indicates the SVI index. Its value is equal to the
ifIndex of the associated entry in the ifTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.6.3.14.1.1
sviBoundToType
Holds the type of the SVI according to the service it is
bounded to.
Enumerationr/w
Enumerated Values:
1none
2bridge
3pw
4router
5twamp
 .1.3.6.1.4.1.164.6.3.14.1.5

cosInternalProfileTable

table
.1.3.6.1.4.1.164.6.3.15 · 1 row entry · 7 columns
Open in standard view 
Internal Class of Service Profile table.
Each profile holds a priority method, and a mapping function
that maps the priority values (range according to the method)
into internal CoS values.
cosInternalProfileEntry entry .1.3.6.1.4.1.164.6.3.15.1
A conceptual row where each row contains one Internal CoS attributes.
Indexes
cosInternalProfileIndex
Column Syntax OID
cosInternalProfileIndex
Defines the internal CoS Profile ID.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.15.1.1
cosInternalProfileRowStatus
This attribute is used to create a new row or to delete an existing
row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.15.1.2
cosInternalProfileCosMethod
Defines the priority method upon Internal CoS mapping is done.
ProfileMethodr/w
Textual Convention: ProfileMethod Enumeration
Type Values:
2ieee802dot1p
3tos
4dscp
5ipPrecedence
6userPorts
7internalCos
8dei
 .1.3.6.1.4.1.164.6.3.15.1.3
cosInternalProfileName
This attribute defines the name assigned to Internal CoS profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.6.3.15.1.4
cosInternalProfileCosMapping
This attribute defines the value of the Internal CoS that is assigned
for each priority. The number of the valid octets depends upon
the priority method selected:
Octet 0 corresponds to priority = 0
Octet 1 corresponds …
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.164.6.3.15.1.5
cosInternalProfileUntaggedMapping
This attribute defines the CoS mapping of untagged frames.

This object is relevant only when cosInternalProfileCosMethod
is set to ieee802dot1p(2).
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.6.3.15.1.6
cosInternalProfileNonIpMapping
This attribute defines the CoS mapping of non-IP packets.

This object is relevant only when cosInternalProfileCosMethod
is set to dscp(4).
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.6.3.15.1.7

colorMappingProfileTable

table
.1.3.6.1.4.1.164.6.3.16 · 1 row entry · 5 columns
Open in standard view 
Color Mapping Profile table.
Each profile holds a priority method and a mapping function
that maps the priority values (range according to the method)
into color code values.
colorMappingProfileEntry entry .1.3.6.1.4.1.164.6.3.16.1
The table entry.
Indexes
colorMappingProfileIndex
Column Syntax OID
colorMappingProfileIndex
Defines the Color Mapping Profile ID.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.16.1.1
colorMappingProfileRowStatus
Table row status. It is based on the standard RowStatus
definition of RFC2579.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.16.1.2
colorMappingProfileMethod
Defines the priority method upon Color Mapping is done.
ProfileMethodr/w
Textual Convention: ProfileMethod Enumeration
Type Values:
2ieee802dot1p
3tos
4dscp
5ipPrecedence
6userPorts
7internalCos
8dei
 .1.3.6.1.4.1.164.6.3.16.1.3
colorMappingProfileName
This attribute defines the name assigned to Color Mapping
profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.6.3.16.1.4
colorMappingProfileMapping
This attribute defines the value of the color that is
assigned for each priority:
- green (0)
- yellow (1)
The number of the valid octets depends on the priority
method selected:
Octet 0 corresponds to priority = 0
Oct…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.164.6.3.16.1.5

portClassifierTable

table
.1.3.6.1.4.1.164.6.3.17.2 · 1 row entry · 4 columns
Open in standard view 
This table contains a list of classifiers used at the port level.
          
The port classifiers are also called Advanced ACLs (A2CL).
portClassifierEntry entry .1.3.6.1.4.1.164.6.3.17.2.1
An entry in port classifier table.

A row can be deleted unconditionally.

When a row is deleted all the corresponding rows in the
portClassifierActionTable, portClassifierCommentTable and
portCl…
Indexes
IF-MIBifIndex
Column Syntax OID
portClassifierRowStatus
This object enables creation and deletion of port classifiers.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.17.2.1.1
portClassifierNumberOfActions
The number of actions (entries) for this interface in the
portClassifierActionTable.

The initial value is zero.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.17.2.1.2
portClassifierHighSequenceNumber
The highest used sequence number for this interface in the
portClassifierActionTable and portClassifierCommentTable.

This number is updated upon row activation/deletion at the
portClassifierActionTable an…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.17.2.1.3
portClassifierResequenceCmd
Resequence command, specifying step between sequence numbers.
For example, when resequence command with value of 100 is given,
new sequence numbers shall be 100 200 300 400 etc.
Possible Set values - 1..10000.
…
Unsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.164.6.3.17.2.1.4

portClassifierActionTable

table
.1.3.6.1.4.1.164.6.3.17.3 · 1 row entry · 43 columns
Open in standard view 
This table contains a list of port classifier rules (ACL rules).
A rule has a match or drop action.
portClassifierActionEntry entry .1.3.6.1.4.1.164.6.3.17.3.1
An entry in the port classifier rules table.

When a row is created/deleted , a corresponding row (where
portClassifierInvSequenceNumber equals portClassifierActionSequenceNumber)
is automatically created/de…
Indexes
IF-MIBifIndex portClassifierActionIndex
Column Syntax OID
portClassifierActionIndex
A running number for the port classifier rules.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.17.3.1.1
portClassifierActionRowStatus
This object enables creation and deletion of port classifiers rules.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.17.3.1.2
portClassifierActionSequenceNumber
The sequence number (priority) of the rule.

It must be unique across all rows of this table and of
portClassifierCommentTable.

The default value is portClassifierHighSequenceNumber plus 10.
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.164.6.3.17.3.1.3
portClassifierActionType
The type of the action.
Enumerationr/w
Enumerated Values:
1match
2drop
 .1.3.6.1.4.1.164.6.3.17.3.1.4
portClassifierActionFlowName
The name of the associated flow.

When the portClassifierActionType is match(1), the name cannot be a
null string.
When the portClassifierActionType is drop(2), the name can only be a
null string.
OctetStringr/w
Constraints:
range: 0-252
 .1.3.6.1.4.1.164.6.3.17.3.1.5
portClassifierActionFlowIndex1
The value of rad.flowIdx1 of the associated flow.

If the associated flow does not exist, zero is returned.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.17.3.1.6
portClassifierActionFlowIndex2
The value of rad.flowIdx2 of the associated flow.

If the associated flow does not exist, zero is returned.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.17.3.1.7
portClassifierActionCos
The CoS assigned to the rule.

A value of 255 means the CoS mapping profile of
portClassifierActionCosMapProfile is used instead of this object.

No CoS is assigned to the rule when {portClas…
Unsigned32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.164.6.3.17.3.1.8
portClassifierActionCosMapProfile
The profile used to map frames that match the rule to CoS value.

The configured value is the index of the corresponding entry in
cosInternalProfileTable.

A value of zero means a fixed CoS p…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.17.3.1.9
portClassifierActionHits
The number of incoming frames that matched the rule.

This counter counts forwarded or dropped frames i.e. regardless of the
value of portClassifierActionType.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.164.6.3.17.3.1.10
portClassifierActionCriteria
The criteria for matching incoming frames.

Several fields may be selected at once. However, no more than one of
the fields tos(9), dscp(10) and ipPrecedence(11) can be selected at a
time (mutual exclusion…
Bitsr/w
Enumerated Values:
0dstMacAddress
1srcMacAddress
2outerEtherType
3outerVlanId
4outerPbit
5outerDei
6innerEtherType
7innerVlanId
8innerPbit
9tos
10dscp
11ipPrecedence
12protocol
13srcIPAddress
14dstIPAddress
15tcpSrcPort
16tcpDstPort
17udpSrcPort
18udpDstPort
19untagged
 .1.3.6.1.4.1.164.6.3.17.3.1.11
portClassifierActionDstMacAddressLow
The lowest destination MAC address to compare with in a range.

The value should be lower than or equal to
portClassifierActionDstMacAddressHigh.

This object is relevant only when the dstMac…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.6.3.17.3.1.12
portClassifierActionDstMacAddressHigh
The highest destination MAC address to compare with in a range.

The value should be higher than or equal to
portClassifierActionDstMacAddressLow.

This object is relevant only when the dstMa…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.6.3.17.3.1.13
portClassifierActionSrcMacAddressLow
The lowest source MAC address to compare with in a range.

The value should be lower than or equal to
portClassifierActionSrcMacAddressHigh.

This object is relevant only when the srcMacAddre…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.6.3.17.3.1.14
portClassifierActionSrcMacAddressHigh
The highest source MAC address to compare with in a range.

The value should be higher than or equal to
portClassifierActionSrcMacAddressLow.

This object is relevant only when the srcMacAddr…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.164.6.3.17.3.1.15
portClassifierActionOuterEtherType
The value of the EtherType of the outer VLAN to compare with.

This object is relevant only when the outerEtherType(2) bit in
portClassifierActionCriteria is set.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.164.6.3.17.3.1.16
portClassifierActionOuterVlanIdLow
The lowest outer VLAN ID to compare with in a range.

The value should be lower than or equal to
portClassifierActionOuterVlanIdHigh.

This object is relevant only when the outerVlanId(3) bit…
Q-BRIDGE-MIBVlanIdOrAnyOrNoner/w
Textual Convention: Q-BRIDGE-MIBVlanIdOrAnyOrNone Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.164.6.3.17.3.1.17
portClassifierActionOuterVlanIdHigh
The highest outer VLAN ID to compare with in a range.

The value should be higher than or equal to
portClassifierActionOuterVlanIdLow.

This object is relevant only when the outerVlanId(3) bi…
Q-BRIDGE-MIBVlanIdOrAnyOrNoner/w
Textual Convention: Q-BRIDGE-MIBVlanIdOrAnyOrNone Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.164.6.3.17.3.1.18
portClassifierActionOuterPbitLow
The lowest outer P-bit value to compare with in a range.

The value should be lower than or equal to
portClassifierActionOuterPbitHigh.

This object is relevant only when the outerPbit(4) bit…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.6.3.17.3.1.19
portClassifierActionOuterPbitHigh
The highest outer P-bit value to compare with in a range.

The value should be higher than or equal to
portClassifierActionOuterPbitLow.

This object is relevant only when the outerPbit(4) bi…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.6.3.17.3.1.20
portClassifierActionOuterDei
The value of the DEI of the outer VLAN to compare with.

This object is relevant only when the outerDei(5) bit in
portClassifierActionCriteria is set.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.164.6.3.17.3.1.21
portClassifierActionInnerEtherType
The value of the EtherType of the inner VLAN to compare with.

This object is relevant only when the innerEtherType(6) bit in
portClassifierActionCriteria is set.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.164.6.3.17.3.1.22
portClassifierActionInnerVlanIdLow
The lowest inner VLAN ID to compare with in a range.

The value should be lower than or equal to
portClassifierActionInnerVlanIdHigh.

This object is relevant only when the innerVlanId(7) bit…
Q-BRIDGE-MIBVlanIdOrAnyOrNoner/w
Textual Convention: Q-BRIDGE-MIBVlanIdOrAnyOrNone Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.164.6.3.17.3.1.23
portClassifierActionInnerVlanIdHigh
The highest inner VLAN ID to compare with in a range.

The value should be higher than or equal to
portClassifierActionInnerVlanIdLow.

This object is relevant only when the innerVlanId(7) bi…
Q-BRIDGE-MIBVlanIdOrAnyOrNoner/w
Textual Convention: Q-BRIDGE-MIBVlanIdOrAnyOrNone Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.164.6.3.17.3.1.24
portClassifierActionInnerPbitLow
The lowest inner P-bit value to compare with in a range.

The value should be lower than or equal to
portClassifierActionInnerPbitHigh.

This object is relevant only when the innerPbit(8) bit…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.6.3.17.3.1.25
portClassifierActionInnerPbitHigh
The highest inner P-bit value to compare with in a range.

The value should be higher than or equal to
portClassifierActionInnerPbitLow.

This object is relevant only when the innerPbit(8) bi…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.6.3.17.3.1.26
portClassifierActionTosLow
The lowest IP TOS/DSCP/Precedence value to compare with in a range.

The value should be lower than or equal to portClassifierActionTosHigh.

This object is relevant only when the tos(9) bit,…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.6.3.17.3.1.27
portClassifierActionTosHigh
The highest IP TOS/DSCP/Precedence value to compare with in a range.

The value should be higher than or equal to portClassifierActionTosLow.

This object is relevant only when the tos(9) bit…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.6.3.17.3.1.28
portClassifierActionProtocol
The value of the Protocol field of the IPv4 header or the Next Header
field of IPv6 header to compare with.

This object is relevant only when the protocol(12) bit in
portClassifierActionCriteria is set.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.6.3.17.3.1.29
portClassifierActionSrcIPAddressType
The type of the source IP address of portClassifierActionSrcIPAddress.

This object is relevant only when the srcIPAddress(13) bit in
portClassifierActionCriteria is set.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.6.3.17.3.1.30
portClassifierActionSrcIPAddress
The IP address to match against the packet's source IP address.
The type of this address is determined by the value of
portClassifierActionSrcIPAddressType.

This object is relevant only when the srcIPAddr…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.6.3.17.3.1.31
portClassifierActionSrcIPAddressPrefixLength
The length of the CIDR Prefix carried in
portClassifierActionSrcIPAddress.

This object is relevant only when the srcIPAddress(13) bit in
portClassifierActionCriteria is set.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.164.6.3.17.3.1.32
portClassifierActionDstIPAddressType
The type of the destination IP address of
portClassifierActionDstIPAddress.

This object is relevant only when the dstIPAddress(14) bit in
portClassifierActionCriteria is set.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.6.3.17.3.1.33
portClassifierActionDstIPAddress
The IP address to match against the packet's destination IP address.
The type of this address is determined by the value of
portClassifierActionDstIPAddressType.

This object is relevant only when the dstI…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.6.3.17.3.1.34
portClassifierActionDstIPAddressPrefixLength
The length of the CIDR Prefix carried in
portClassifierActionDstIPAddress.

This object is relevant only when the dstIPAddress(14) bit in
portClassifierActionCriteria is set.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.164.6.3.17.3.1.35
portClassifierActionTcpSrcPortLow
The lowest TCP source port number to compare with in a range.

The value should be lower than or equal to
portClassifierActionTcpSrcPortHigh.

This object is relevant only when the tcpSrcPort…
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.6.3.17.3.1.36
portClassifierActionTcpSrcPortHigh
The highest TCP source port number to compare with in a range.

The value should be higher than or equal to
portClassifierActionTcpSrcPortLow.

This object is relevant only when the tcpSrcPor…
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.6.3.17.3.1.37
portClassifierActionTcpDstPortLow
The lowest TCP destination port number to compare with in a range.

The value should be lower than or equal to
portClassifierActionTcpDstPortHigh.

This object is relevant only when the tcpDs…
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.6.3.17.3.1.38
portClassifierActionTcpDstPortHigh
The highest TCP destination port number to compare with in a range.

The value should be higher than or equal to
portClassifierActionTcpDstPortLow.

This object is relevant only when the tcpD…
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.6.3.17.3.1.39
portClassifierActionUdpSrcPortLow
The lowest UDP source port number to compare with in a range.

The value should be lower than or equal to
portClassifierActionUdpSrcPortHigh.

This object is relevant only when the udpSrcPort…
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.6.3.17.3.1.40
portClassifierActionUdpSrcPortHigh
The highest UDP source port number to compare with in a range.

The value should be higher than or equal to
portClassifierActionUdpSrcPortLow.

This object is relevant only when the udpSrcPor…
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.6.3.17.3.1.41
portClassifierActionUdpDstPortLow
The lowest UDP destination port number to compare with in a range.

The value should be lower than or equal to
portClassifierActionUdpDstPortHigh.

This object is relevant only when the udpDs…
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.6.3.17.3.1.42
portClassifierActionUdpDstPortHigh
The highest UDP destination port number to compare with in a range.

The value should be higher than or equal to
portClassifierActionUdpDstPortLow.

This object is relevant only when the udpD…
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.164.6.3.17.3.1.43

portClassifierCommentTable

table
.1.3.6.1.4.1.164.6.3.17.4 · 1 row entry · 4 columns
Open in standard view 
This table contains a list of port classifier comments (ACL coments).
portClassifierCommentEntry entry .1.3.6.1.4.1.164.6.3.17.4.1
An entry in the port classifier comments table.

When a row is created/deleted , a corresponding row (where
portClassifierInvSequenceNumber equals portClassifierCommentSequenceNumber)
is automatically create…
Indexes
IF-MIBifIndex portClassifierCommentIndex
Column Syntax OID
portClassifierCommentIndex
A running number for the port classifier comments.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.17.4.1.1
portClassifierCommentRowStatus
This object enables creation and deletion of port classifiers comments.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.6.3.17.4.1.2
portClassifierCommentSequenceNumber
The sequence number (priority) of the comment.

It must be unique across all rows of this table and of
portClassifierActionTable.

The default value is portClassifierHighSequenceNumber plus 1…
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.164.6.3.17.4.1.3
portClassifierCommentDescr
Free text describing the following rules.
OctetStringr/w
Constraints:
range: 1-252
 .1.3.6.1.4.1.164.6.3.17.4.1.4

portClassifierInvTable

table
.1.3.6.1.4.1.164.6.3.17.5 · 1 row entry · 3 columns
Open in standard view 
This read-only table contains a list of port classifier actions and
comments. The list is sorted by sequence number.
portClassifierInvEntry entry .1.3.6.1.4.1.164.6.3.17.5.1
An entry in port classifier inverse table.

A row is autonatically created/deleted when a row is activated/deleted
at the portClassifierActionTable or at the portClassifierCommentTable.

When a r…
Indexes
IF-MIBifIndex portClassifierInvSequenceNumber
Column Syntax OID
portClassifierInvSequenceNumber
The sequence number (priority) of the rule or comment.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.17.5.1.1
portClassifierInvType
Indicates the origin table of the entry:
action(1) - portClassifierActionTable
comment(2) - portClassifierCommentTable .
Enumeration
Enumerated Values:
1action
2comment
 .1.3.6.1.4.1.164.6.3.17.5.1.2
portClassifierInvPointer
The running index at the origin table per portClassifierInvType.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.6.3.17.5.1.3