RAD-BROADBAND-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
23

prtBdbandIndTable

table
.1.3.6.1.4.1.164.3.1.6.8.1.1 · 1 row entry · 6 columns
Open in standard view 
The Indication Signal table.
prtBdbandIndEntry entry .1.3.6.1.4.1.164.3.1.6.8.1.1.1
An entry in the Indication Signal table.
Indexes
prtBdbandCnfgIdx prtBdbandIdx prtBdbandIndSig prtBdbandIndEvent
Column Syntax OID
prtBdbandCnfgIdx
This object indicates the Idx of the Agent Cnfg the following
objects refer.
255=Temporary Cnfg (when relevant, Set is done only to this configuration).
For Agents that support only one configuration, this object will b…
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.1.6.8.1.1.1.1
prtBdbandIdx
This object indicates a unique port or interface number.
For numbering, see product's spec.
For some products, the numbering can equal ifIndex.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.1.6.8.1.1.1.2
prtBdbandIndSig
This object indicates a unique Indication Signal.
ais(1) = AIS = Alarm Indication Signal.
rdi(2) = RDI = Remote Defect Indication.
Enumeration
Enumerated Values:
1ais
2rdi
3aisAndRdi
 .1.3.6.1.4.1.164.3.1.6.8.1.1.1.3
prtBdbandIndEvent
This object indicates a unique Event that can cause the Indication Signal.
slm(2) = SLM = Signal Label Mismatch
fail (3) = other failures
eed(4) = EED = Excessive Error Defect
pathTrace(5) = the end-to-end source/dest…
Enumeration
Enumerated Values:
1notApplicable
2slm
3fail
4eed
5pathTrace
6lom
7lop
8slu
 .1.3.6.1.4.1.164.3.1.6.8.1.1.1.4
prtBdbandIndSigEnable
This object allows user to define if the event specified by prtBdbandIndEvent
will cause creation of the Indication Signal specified by prtBdbandIndSig or not.
disable - will not enable causing the signal
enable - will…
Enumerationr/w
Enumerated Values:
1notApplicable
2disable
3enable
 .1.3.6.1.4.1.164.3.1.6.8.1.1.1.5
prtBdbandRowStatus
Creation/Deletion of rows in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.3.1.6.8.1.1.1.6

prtPhyConfigTable

table
.1.3.6.1.4.1.164.3.1.6.8.1.2 · 1 row entry · 2 columns
Open in standard view 
The Phy Config table. Used now for Phy25.6 Mbps.
prtPhyConfigEntry entry .1.3.6.1.4.1.164.3.1.6.8.1.2.1
An entry in the Phy Config table.
Indexes
IF-MIBifIndex
Column Syntax OID
prtPhyTimeElapsed
The number of seconds that have elapsed since
the beginning of the current error-measurement period.
Integer32
Constraints:
range: 0-899
 .1.3.6.1.4.1.164.3.1.6.8.1.2.1.1
prtPhyValidIntervals
The number of previous intervals for which valid data was collected.
The value will be 96 unless the interface was brought online within
the last 24 hours, in which case the value will be the number of complete
15 mi…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.164.3.1.6.8.1.2.1.2

prtPhyCurrentTable

table
.1.3.6.1.4.1.164.3.1.6.8.2.1 · 1 row entry · 7 columns
Open in standard view 
The 25.6 Mbps Section/Line Current table.
prtPhyCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.8.2.1.1
An entry in the 25.6 Mbps Line Current table.
ifIndex of the line 25.6 Mbps layer of type
25.6 Mbps.
Indexes
IF-MIBifIndex
Column Syntax OID
prtPhyCurrentLOS
The counter associated with the number of Loss Of Sync
seconds, encountered by a 25.6 Mbps interface in
the current 15 minute interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.1.1.1
prtPhyCurrentLSV
The counter associated with the number of Line symbol violation
seconds, encountered by a 25.6 Mbps
interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.1.1.2
prtPhyCurrentUAS
The counter associated with the number of UAS
encountered by a 25.6 Mbps
interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.1.1.3
prtPhyCurrentSES
The counter associated with the number of SES
encountered by a 25.6 Mbps
interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.1.1.4
prtPhyCurrentES
The number of Errored Seconds, encountered by a
25.6 Mbps interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.1.1.5
prtPhyCurrentStatus
The statuses of the current interval:
0 - O.K.
1 - The link has been switched by a redundancy mechanism.
2 - Module is in/out.
4 - Empty - card is out.
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.164.3.1.6.8.2.1.1.6
prtPhyCurrentLOF
The number of Loss of Frames, encountered by an
interface in the current 15 minute interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.1.1.7

prtPhyIntervalTable

table
.1.3.6.1.4.1.164.3.1.6.8.2.2 · 1 row entry · 8 columns
Open in standard view 
The Line Interval table.
prtPhyIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.8.2.2.1
An entry in the 25.6 Mbps Line Interval table.
ifIndex of the line 25.6 Mbps layer of type 25.6 Mbps.
Indexes
IF-MIBifIndex prtPhyIntervalNumber
Column Syntax OID
prtPhyIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid).
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.164.3.1.6.8.2.2.1.1
prtPhyIntervalLOS
The counter associated with the number of Loss Of Sync
seconds , encountered by a 25.6 Mbps interface in
one of the previous 96, individual 15 minute intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.2.1.2
prtPhyIntervalLSV
The counter associated with the number of line symbol violation
seconds , encountered by a 25.6 Mbps interface in
one of the previous 96, individual 15 minute intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.2.1.3
prtPhyIntervalUAS
The counter associated with the number of UAS
encountered by a 25.6 Mbps interface in one of the previous 96,
individual 15 minute intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.2.1.4
prtPhyIntervalSES
The counter associated with the number of SES
encountered by a 25.6 Mbps interface in one of the previous 96,
individual 15 minute intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.2.1.5
prtPhyIntervalES
The number of Errored Seconds, encountered by a
25.6 Mbps interface in one of the previous 96, individual 15
minute intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.2.1.6
prtPhyIntervalStatus
The statuses of the current interval:
0 - O.K.
1 - The link has been switched by a redundancy mechanism.
2 - Module is in/out.
4 - Empty - card is out.
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.164.3.1.6.8.2.2.1.7
prtPhyIntervalLOF
The number of Loss of Frames, encountered by an
interface in one of the previous 96, individual 15
minute intervals.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.1.6.8.2.2.1.8