QTECH-VPLS-GENERIC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
28

qtechvplsConfigTable

table
.1.3.6.1.4.1.27514.1.1.10.2.77.1.2 · 1 row entry · 14 columns
Open in standard view 
This table specifies information for configuring
and monitoring Virtual Private Lan Services(VPLS).
qtechvplsConfigEntry entry .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1
A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
qtechvplsConfigIndex, which uniquely identifies a single VPLS.

A row is created by the operator or by…
Indexes
qtechvplsConfigIndex
Column Syntax OID
qtechvplsConfigIndex
Unique index for the conceptual row identifying
a VPLS service.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.1
qtechvplsConfigName
A textual name of the VPLS.
If there is no local name, or this object is
otherwise not applicable, then this object MUST
contain a zero-length octet string.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.2
qtechvplsConfigDescr
A textual string containing information about the
VPLS service. If there is no information for this VPLS
service, then this object MUST contain a zero-length
octet string.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.3
qtechvplsConfigAdminStatus
The desired administrative state of the VPLS
service. If the administrative status of the
Vpls service is changed to enable then this
service is able to utilize the pseudo wire to
perform the tasks of a VPLS service.
Th…
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.4
qtechvplsConfigMacLearning
This object specifies if MAC Learning is enabled
in this service. If this object is true then Mac
Learning is enabled. If false, then Mac Learning is
disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.5
qtechvplsConfigDiscardUnknownDest
If the value of this object is 'true', then frames
received with an unknown destination MAC are discarded
in this VPLS. If 'false', then the packets are
processed.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.6
qtechvplsConfigMacAging
If the value of this object is 'true'
then the MAC aging process is enabled in
this VPLS. If 'false', then the MAC aging process
is disabled
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.7
qtechvplsConfigFwdFullHighWatermark
This object specifies the utilization of the
forwarding database for this VPLS instance at
which the qtechvplsFwdFullAlarmRaised notification
will be sent.
percentageUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.8
qtechvplsConfigFwdFullLowWatermark
This object specifies the utilization of the
forwarding database for this VPLS instance
at which the qtechvplsFwdFullAlarmCleared
notification will be sent.
percentageUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.9
qtechvplsConfigRowStatus
For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.10
qtechvplsConfigMtu
The value of this object specifies the MTU of this
vpls instance.
Unsigned32r/w
Constraints:
range: 46-1530
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.11
qtechvplsConfigVpnId
This objects indicates the IEEE 802-1990
VPN ID of the associated VPLS service.
VPN-TC-STD-MIBVPNIdOrZeror/w
Textual Convention: VPN-TC-STD-MIBVPNIdOrZero OctetString
Type Constraints:
range: 0
range: 7
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.12
qtechvplsConfigServiceType
The value of this object specifies the type of
service emulated by this vpls instance. Invalid for RFC 4762
Enumerationr/w
Enumerated Values:
1vlan
2ethernet
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.13
qtechvplsConfigServiceSignal
The value of this object indicates
vpls is created with LDP or BGP signalling.

The value of this object must be
specifed when the row is created and cannot
be changed while the row status is active(1)
Enumerationr/w
Enumerated Values:
1manual
2autodiscovery
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.2.1.14

qtechvplsStatusTable

table
.1.3.6.1.4.1.27514.1.1.10.2.77.1.3 · 1 row entry · 2 columns
Open in standard view 
This table provides information for monitoring
Virtual Private Lan Services(VPLS).
qtechvplsStatusEntry entry .1.3.6.1.4.1.27514.1.1.10.2.77.1.3.1
A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
qtechvplsConfigIndex, which uniquely identifies a single VPLS.

A row in this table is automatically c…
Indexes
qtechvplsConfigIndex
Column Syntax OID
qtechvplsStatusOperStatus
The current operational state of this VPLS Service.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.3.1.1
qtechvplsStatusPeerCount
This objects specifies the number of peers
present in this vpls instance.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.3.1.2

qtechvplsPwBindTable

table
.1.3.6.1.4.1.27514.1.1.10.2.77.1.4 · 1 row entry · 3 columns
Open in standard view 
This table provides an association between a
VPLS service and the corresponding Pseudo
Wires. A service can have more than one Pseudo
Wire association. Pseudo Wires are defined in
the pwTable
qtechvplsPwBindEntry entry .1.3.6.1.4.1.27514.1.1.10.2.77.1.4.1
Each row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the …
Indexes
qtechvplsConfigIndex qtechvplsPwBindIndex
Column Syntax OID
qtechvplsPwBindIndex
Unique index for PW bind in vpls instance.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.4.1.1
qtechvplsPwBindConfigType
The value of this object indicates
whether the Pseudo Wire binding was created
manually or via autodiscovery.

The value of this object must be
specifed when the row is created and cannot
be changed while …
Enumeration
Enumerated Values:
1manual
2autodiscovery
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.4.1.2
qtechvplsPwBindType
The value of this object indicates
whether the Pseudo Wire binding is of
type mesh or spoke.

The value of this object must be
specifed when the row is created and cannot
be changed while the row status is…
Enumeration
Enumerated Values:
1mesh
2spoke
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.4.1.3

qtechvplsBgpADConfigTable

table
.1.3.6.1.4.1.27514.1.1.10.2.77.1.5 · 1 row entry · 2 columns
Open in standard view 
This table specifies information for configuring
BGP Auto-discovery parameters for a given Vpls service.
qtechvplsBgpADConfigEntry entry .1.3.6.1.4.1.27514.1.1.10.2.77.1.5.1
A row in this table represents BGP based autodiscovery
is in use for this instance of Vpls.
A row in this table is indexed by qtechvplsConfigIndex, which
uniquely identifies a single VPLS.
None of the read-create object…
Indexes
qtechvplsConfigIndex
Column Syntax OID
qtechvplsBgpADConfigRouteDistinguisher
The route distinguisher for this VPLS. See [RFC4364]
for a complete definition of a route distinguisher.
for more details on use of a route distinguisher
for a VPLS service, see [RFC4761]
QtechVplsBgpRouteDistinguisherr/w
Textual Convention: QtechVplsBgpRouteDistinguisher OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.5.1.1
qtechvplsBgpADConfigRowStatus
For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.5.1.2

qtechvplsBgpRteTargetTable

table
.1.3.6.1.4.1.27514.1.1.10.2.77.1.6 · 1 row entry · 4 columns
Open in standard view 
This table specifies the list of Route Targets
imported or exported by BGP during auto-discovery of VPLS.
qtechvplsBgpRteTargetEntry entry .1.3.6.1.4.1.27514.1.1.10.2.77.1.6.1
An entry in this table specifies the value of the
Route Target being used by BGP. Depending on the value
of vplsBgpRteTargetType an RT might be exported or
imported or both. Every VPLS which
uses auto-discovery for find…
Indexes
qtechvplsConfigIndex qtechvplsBgpRteTargetIndex
Column Syntax OID
qtechvplsBgpRteTargetIndex
This index along with qtechvplsConfigIndex,identifies one entry
in the qtechvplsBgpRteTargetTable. By keeping qtechvplsConfigIndex
constant and using new value of qtechvplsBgpRteTargetIndex user
can configure multiple …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.6.1.1
qtechvplsBgpRteTargetRTType
Used to define the type of a route target usage.
Route targets can be specified to be imported,
exported, or both. For a complete definition of a
route target, see [RFC4364].
QtechVplsBgpRouteTargetTyper/w
Textual Convention: QtechVplsBgpRouteTargetType Enumeration
Type Values:
1import
2export
3both
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.6.1.2
qtechvplsBgpRteTargetRT
The route target associated with the VPLS service.
For more details on use of route targets
for a VPLS service, see [RFC4761]
QtechVplsBgpRouteTargetr/w
Textual Convention: QtechVplsBgpRouteTarget OctetString
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.6.1.3
qtechvplsBgpRteTargetRTRowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.6.1.4

qtechvplsIfBindTable

table
.1.3.6.1.4.1.27514.1.1.10.2.77.1.7 · 1 row entry · 3 columns
Open in standard view 
This table provides an association between a
VPLS service and interface. A service can bind
more than one interface.
qtechVplsIfBindEntry entry .1.3.6.1.4.1.27514.1.1.10.2.77.1.7.1
Each row represents an association between a
VPLS instance and one or more interface. Each
index is unique in describing an entry in this table.
Indexes
qtechvplsConfigIndex qtechvplsIfBindIndex
Column Syntax OID
qtechvplsIfBindIndex
Interface index for vpls instance.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.7.1.1
qtechvplsSiteId
VE id associated with the VPLS service.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.7.1.2
qtechvplsIfRowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except vplsBgpSiteRowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.27514.1.1.10.2.77.1.7.1.3