QTECH-IPSEC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
57

qtechIPSecTunnelTable

table
.1.3.6.1.4.1.27514.1.1.10.2.94.1.1 · 1 row entry · 28 columns
Open in standard view 
The IPSec Phase-2 Tunnel Table. There is one
entry in this table for each active IPSec Phase-2 Tunnel.
qtechIPSecTunnelEntry entry .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1
Information about qtechIPSecTunnelTable.
Indexes
qtechIPSecTunRemoteAddr
Column Syntax OID
qtechIPSecTunIfIndex
The interface index( the ifIndex of ifTable ).
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.1
qtechIPSecTunIndex
The index of IPSec Phase-2 Tunnel Table. The value of
the index is a number which begins at one and is
incremented with each tunnel that is created. The
value of this object will wrap at 2,147,483,647.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.2
qtechIPSecTunIKETunnelIndex
The index of the associated IPSec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.3
qtechIPSecTunLocalAddr
The IP address of the local peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.4
qtechIPSecTunRemoteAddr
The IP address of the remote peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.5
qtechIPSecTunLocalHostname
The Hostname of the local peer for the IPSec Phase-2
Tunnel.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.6
qtechIPSecTunRemoteHostname
The Hostname of the remote peer for the IPSec Phase-2
Tunnel.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.7
qtechIPSecTunKeyType
The key negotiate mode used by the IPSec Phase-2 Tunnel.
QtechIPSecNegoType
Textual Convention: QtechIPSecNegoType Enumeration
Type Values:
1ike
2manual
2147483647invalidType
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.8
qtechIPSecTunEncapMode
The encapsulation mode used by the IPSec Phase-2 Tunnel.
QtechEncapMode
Textual Convention: QtechEncapMode Enumeration
Type Values:
1tunnel
2transport
2147483647invalidMode
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.9
qtechIPSecTunInitiator
The initiator of this IPSec tunnel. Value none is used for manual
IPsec tunnel, for there is no initiator or responder in this method.
Enumeration
Enumerated Values:
1local
2remote
2147483647none
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.10
qtechIPSecTunLifeSize
The negotiated LifeSize of the IPSec Phase-2 Tunnel in kilobytes.
2147483647 is defined as invalid value.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.11
qtechIPSecTunLifeTime
The negotiated LifeTime of the IPSec Phase-2 Tunnel in seconds.
2147483647 is defined as invalid value.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.12
qtechIPSecTunRemainTime
The remain time of SA in seconds. 2147483647 is defined as invalid
value.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.13
qtechIPSecTunActiveTime
The duration the IPSec Phase-2 Tunnel has been active in
hundredths of seconds. 2147483647 is defined as invalid value.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.14
qtechIPSecTunCreateTime
The Time Stamp when the IPSec Phase-2 Tunnel created.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.15
qtechIPSecTunRemainSize
The remain LifeSize of SA in kilobytes. 2147483647 is defined as
invalid value.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.16
qtechIPSecTunTotalRefreshes
The total number of security association refreshing performed.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.17
qtechIPSecTunCurrentSaInstances
The number of security associations which are currently active
or expiring.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.18
qtechIPSecTunInSaEncryptAlgo
The encryption algorithm used by the inbound security association
of the IPSec Phase-2 Tunnel.
QtechEncryptAlgo
Textual Convention: QtechEncryptAlgo Enumeration
Type Values:
0none
2desCbc
3threedesCbc
12aesCbc
128sm1Cbc
2147483647invalidAlg
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.19
qtechIPSecTunInSaAhAuthAlgo
The authentication algorithm used by the inbound authentication
header (AH) security association of the IPSec Phase-2 Tunnel.
QtechAuthAlgo
Textual Convention: QtechAuthAlgo Enumeration
Type Values:
0none
1md5
2sha
2147483647invalidAlg
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.20
qtechIPSecTunInSaEspAuthAlgo
The authentication algorithm used by the inbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.
QtechAuthAlgo
Textual Convention: QtechAuthAlgo Enumeration
Type Values:
0none
1md5
2sha
2147483647invalidAlg
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.21
qtechIPSecTunDiffHellmanGrp
The Diffie Hellman Group used by the security association of the
IPSec Phase-2 Tunnel.
QtechDiffHellmanGrp
Textual Convention: QtechDiffHellmanGrp Enumeration
Type Values:
0none
1modp768
2modp1024
2147483647invalidMode
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.22
qtechIPSecTunOutSaEncryptAlgo
The encryption algorithm used by the outbound security
association of the IPSec Phase-2 Tunnel.
QtechEncryptAlgo
Textual Convention: QtechEncryptAlgo Enumeration
Type Values:
0none
2desCbc
3threedesCbc
12aesCbc
128sm1Cbc
2147483647invalidAlg
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.23
qtechIPSecTunOutSaAhAuthAlgo
The authentication algorithm used by the outbound
authentication header (AH) security association of
the IPSec Phase-2 Tunnel.
QtechAuthAlgo
Textual Convention: QtechAuthAlgo Enumeration
Type Values:
0none
1md5
2sha
2147483647invalidAlg
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.24
qtechIPSecTunOutSaEspAuthAlgo
The authentication algorithm used by the outbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.
QtechAuthAlgo
Textual Convention: QtechAuthAlgo Enumeration
Type Values:
0none
1md5
2sha
2147483647invalidAlg
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.25
qtechIPSecTunMapName
The Map name used by this IPSec tunnel.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.26
qtechIPSecTunSeqNum
The sequence number of policy used by this IPSec tunnel.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.27
qtechIPSecTunStatus
The status of the IPSec Tunnel.
QtechIPSecTunnelStater/w
Textual Convention: QtechIPSecTunnelState Enumeration
Type Values:
1establishing
2active
3expiring
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.28

qtechIPSecTunnelStatTable

table
.1.3.6.1.4.1.27514.1.1.10.2.94.1.2 · 1 row entry · 10 columns
Open in standard view 
The IPSec Phase-2 Tunnel Statistics Table.
qtechIPSecTunnelStatEntry entry .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1
Information about qtechIPSecTunnelStatTable.
Indexes
qtechIPSecTunRemoteAddr
Column Syntax OID
qtechIPSecTunInOctets
The total number of octets received by this IPSec Phase-2 Tunnel.
This value is accumulated BEFORE determining whether or not the
packet should be decompressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.1
qtechIPSecTunInDecompOctets
The total number of decompressed octets received by this IPSec
Phase-2 Tunnel. This value is accumulated AFTER the packet
is decompressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.2
qtechIPSecTunInPkts
The total number of packets received by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.3
qtechIPSecTunInSpeed
The Speed(bps) of packets received by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.4
qtechIPSecTunInDropPkts
The total number of packets dropped during receiving process
by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.5
qtechIPSecTunOutOctets
The total number of octets sent by this IPSec Phase-2 Tunnel.
This value is accumulated AFTER determining whether or not
the packet should be compressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.6
qtechIPSecTunOutUncompOctets
The total number of uncompressed octets sent by this IPSec Phase-2
Tunnel.This value is accumulated BEFORE the packet is compressed.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.7
qtechIPSecTunOutPkts
The total number of packets sent by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.8
qtechIPSecTunOutSpeed
The Speed(bps) of packets sent by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.9
qtechIPSecTunOutDropPkts
The total number of packets dropped during sending process
by this IPSec Phase-2 Tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.10

qtechIPSecSaTable

table
.1.3.6.1.4.1.27514.1.1.10.2.94.1.3 · 1 row entry · 7 columns
Open in standard view 
The IPSec Phase-2 Security Protection Index Table.  This table
contains an entry for each active and expiring security association.
qtechIPSecSaEntry entry .1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1
Information about qtechIPSecSaTable.
Indexes
qtechIPSecTunRemoteAddr
Column Syntax OID
qtechIPSecSaIndex
The number of the Sa associated with the Phase-2 Tunnel
Table. The value of this index is a number which begins
at one and is incremented with each Sa associated with
an IPSec Phase-2 Tunnel. The value of this object …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.1
qtechIPSecSaDirection
The direction of the SA.
Enumeration
Enumerated Values:
1in
2out
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.2
qtechIPSecSaValue
The value of the SPI.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.3
qtechIPSecSaProtocol
The security protocol of the SA.
QtechSaProtocol
Textual Convention: QtechSaProtocol Enumeration
Type Values:
0reserved
1isakmp
2ah
3esp
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.4
qtechIPSecSaEncryptAlgo
The encryption algorithm used by the security association
of the IPSec Phase-2 Tunnel.
QtechEncryptAlgo
Textual Convention: QtechEncryptAlgo Enumeration
Type Values:
0none
2desCbc
3threedesCbc
12aesCbc
128sm1Cbc
2147483647invalidAlg
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.5
qtechIPSecSaAuthAlgo
The authentication algorithm used by the SA.
QtechAuthAlgo
Textual Convention: QtechAuthAlgo Enumeration
Type Values:
0none
1md5
2sha
2147483647invalidAlg
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.6
qtechIPSecSaStatus
The status of the SA.
QtechIPSecTunnelState
Textual Convention: QtechIPSecTunnelState Enumeration
Type Values:
1establishing
2active
3expiring
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.7

qtechIPSecTrafficTable

table
.1.3.6.1.4.1.27514.1.1.10.2.94.1.4 · 1 row entry · 12 columns
Open in standard view 
The IPSec Phase-2 Tunnel Traffic Table.
qtechIPSecTrafficEntry entry .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1
Information about qtechIPSecTrafficTable.
Indexes
qtechIPSecTunRemoteAddr
Column Syntax OID
qtechIPSecTrafficLocalType
The type of local peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.
QtechTrafficType
Textual Convention: QtechTrafficType Enumeration
Type Values:
1ipv4Addr
2ipv4AddrSubnet
3ipv6Addr
4ipv6AddrSubnet
5ipv4AddrRange
6ipv6AddrRange
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.1
qtechIPSecTrafficLocalAddr1
The first specification of local peer's IP address. If
the local peer type is single IP address, then this is the
value of the IP address. If the local peer type is IP subnet,
then this is the value of the subnet. If th…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.2
qtechIPSecTrafficLocalAddr2
The second specification of local peer's IP address. If the local
peer type is single IP address, then this is the value of the
IP address. If the local peer type is IP subnet, then this is
the value of the subnet mask.…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.3
qtechIPSecTrafficLocalProtocol
The protocol number of the local peer's traffic.
QtechTunnelProtocol
Textual Convention: QtechTunnelProtocol Enumeration
Type Values:
0none
1icmp
2igmp
4ip
6tcp
17udp
50esp
51ah
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.4
qtechIPSecTrafficLocalPort
The port number of the local peer's traffic.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.5
qtechIPSecTrafficLocalHostname
The Hostname of local peer's IP address.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.6
qtechIPSecTrafficRemoteType
The type of remote peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.
QtechTrafficType
Textual Convention: QtechTrafficType Enumeration
Type Values:
1ipv4Addr
2ipv4AddrSubnet
3ipv6Addr
4ipv6AddrSubnet
5ipv4AddrRange
6ipv6AddrRange
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.7
qtechIPSecTrafficRemoteAddr1
The first specification of remote peer's IP address.
If the remote peer type is single IP address, then
this is the value of the IP address. If the remote
peer type is IP subnet, then this is the value
of the subnet. If…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.8
qtechIPSecTrafficRemoteAddr2
Single IP address, then this is the value of the IP
address. If the remote peer type is IP subnet,
then this is the value of the subnet mask. If the
remote peer type is IP address range, then this
is the value of ending…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.9
qtechIPSecTrafficRemoteProtocol
The protocol number of the remote peer's traffic.
QtechTunnelProtocol
Textual Convention: QtechTunnelProtocol Enumeration
Type Values:
0none
1icmp
2igmp
4ip
6tcp
17udp
50esp
51ah
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.10
qtechIPSecTrafficRemotePort
The port number of the remote peer's traffic.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.11
qtechIPSecTrafficRemoteHostname
The Hostname of remote peer's IP address.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.12