QTECH-BFD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

qtechBfdSessTable

table

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2 · 1 row entry · 36 columns

Open in standard view

The BFD Session Table describes the BFD sessions.

qtechBfdSessEntry entry .1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1

The BFD Session Entry describes BFD session.

Indexes

qtechBfdSessIndex

Column Syntax OID

qtechBfdSessIndex

This object contains an index used to represent a
unique BFD session on this device.

QtechBfdSessIndexTC

Textual Convention: QtechBfdSessIndexTC Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.1

qtechBfdSessVersionNumber

The version number of the BFD protocol that this session
is running in. Write access is available for this object
to provide ability to set desired version for this
BFD session.

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.2

qtechBfdSessType

This object specifies the type of this BFD session.

QtechBfdSessTypeTCr/w

Textual Convention: QtechBfdSessTypeTC Enumeration

Type Values:

1	singleHop
2	multiHopTotallyArbitraryPaths
3	multiHopOutOfBandSignaling
4	multiHopUnidirectionalLinks
5	multiPointHead
6	multiPointTail

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.3

qtechBfdSessDiscriminator

This object specifies the local discriminator for this BFD
session, used to uniquely identify it.

Unsigned32

Constraints:
range: 0-80
range: 1-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.4

qtechBfdSessRemoteDiscr

This object specifies the session discriminator chosen
by the remote system for this BFD session. The value may
be zero(0) if the remote discriminator is not yet known
or if the session is in the down or adminDown(1) s…

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.5

qtechBfdSessDestinationUdpPort

This object specifies the destination UDP port number
used for this BFD session's control packets. The value
may be zero(0) if the session is in adminDown(1) state.

QtechBfdCtrlDestPortNumberTCr/w

Textual Convention: QtechBfdCtrlDestPortNumberTC Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.6

qtechBfdSessSourceUdpPort

This object specifies the source UDP port number used
for this BFD session's control packets. The value may be
zero(0) if the session is in adminDown(1) state. Upon
creation of a new BFD session via this MIB, the value …

QtechBfdCtrlSourcePortNumberTCr/w

Enumerated Values:

1	started
2	terminated
3	occur
6	sampled
11	occured
16	ongoing

Textual Convention: QtechBfdCtrlSourcePortNumberTC Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.7

qtechBfdSessEchoSourceUdpPort

This object specifies the source UDP port number used for
this BFD session's echo packets. The value may be zero(0)
if the session is not running in the echo mode, or the
session is in adminDown(1) state. Upon creation …

INET-ADDRESS-MIBInetPortNumberr/w

Constraints:
range: 0-32

Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.8

qtechBfdSessAdminStatus

A transition from 'stop' to 'start' will start
the BFD state machine for the session. The state
machine will have an initial state of down.
A transition from 'start' to 'stop' will cause
the BFD sesssion to be brought d…

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.9

qtechBfdSessState

BFD session state.

QtechBfdSessStateTC

Enumerated Values:

1	regular
2	ssl

Textual Convention: QtechBfdSessStateTC Enumeration

Type Values:

1	adminDown
2	down
3	init
4	up
5	failing

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.10

qtechBfdSessRemoteHeardFlag

This object specifies status of BFD packet reception from
the remote system. Specifically, it is set to true(1) if
the local system is actively receiving BFD packets from the
remote system, and is set to false(2) if the…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.11

qtechBfdSessDiag

A diagnostic code specifying the local system's reason
for the last transition of the session from up(4)
to some other state.

QtechBfdDiagTC

Textual Convention: QtechBfdDiagTC Enumeration

Type Values:

0	noDiagnostic
1	controlDetectionTimeExpired
2	echoFunctionFailed
3	neighborSignaledSessionDown
4	forwardingPlaneReset
5	pathDown
6	concatenatedPathDown
7	administrativelyDown
8	reverseConcatenatedPathDown

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.12

qtechBfdSessOperMode

This object specifies current operating mode that BFD
session is operating in.

QtechBfdSessOperModeTCr/w

Enumerated Values:

1	ip
2	tcp
3	udp
4	icmp

Textual Convention: QtechBfdSessOperModeTC Enumeration

Type Values:

1	asyncModeWEchoFunction
2	asynchModeWOEchoFunction
3	demandModeWEchoFunction
4	demandModeWOEchoFunction

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.13

qtechBfdSessDemandModeDesiredFlag

This object indicates that the local system's
desire to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(2) if not

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.14

qtechBfdSessControlPlaneIndepFlag

This object indicates that the local system's
ability to continue to function through a disruption of
the control plane. Specifically, it is set
to true(1) if the local system BFD implementation is
independent of the co…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.15

qtechBfdSessMultipointFlag

This object indicates the Multipoint (M) bit for this
session. It is set to true(1) if Multipoint (M) bit is
set to 1. Otherwise, the value is set to false(2)

SNMPv2-TCTruthValuer/w

Enumerated Values:

1	unassigned
2	intrusion
3	dos
4	anomalies
5	scanning

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.16

qtechBfdSessInterface

This object contains an interface index used to indicate
the interface which this BFD session is running on. This
value can be zero if there is no interface associated
with this BFD session.

IF-MIBInterfaceIndexOrZeror/w

Constraints:
range: 0-80

Textual Convention: IF-MIBInterfaceIndexOrZero Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.17

qtechBfdSessSrcAddrType

This object specifies IP address type of the source IP
address of this BFD session. Only values unknown(0),
ipv4(1), ipv6(2), or ipv6z(4) have to be supported.
The value of unknown(0) is allowed only when the session
is…

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.18

qtechBfdSessSrcAddr

This object specifies the source IP address of this BFD
session.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.19

qtechBfdSessDstAddrType

This object specifies IP address type of the neighboring IP
address which is being monitored with this BFD session.
Only values unknown(0), ipv4(1), ipv6(2), or ipv6z(4)
have to be supported. The value of unknown(0) is …

INET-ADDRESS-MIBInetAddressTyper/w

Enumerated Values:

1	drop
2	forward
3	rst-src
4	rst-dst
5	rst-bi

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.20

qtechBfdSessDstAddr

This object specifies the neighboring IP address which is
being monitored with this BFD session.

INET-ADDRESS-MIBInetAddressr/w

Enumerated Values:

1	n-a
2	low
3	medium
4	high

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.21

qtechBfdSessGTSM

Setting the value of this object to true(1) will enable GTSM
protection of the BFD session. GTSM MUST be enabled on a
singleHop(1) session if no authentication is in use.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.22

qtechBfdSessGTSMTTL

This object is valid only when qtechBfdSessGTSM protection is
enabled on the system. This object specifies the minimum
allowed TTL for received BFD control packets. For
singleHop(1) session, if GTSM protection is enable…

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.23

qtechBfdSessDesiredMinTxInterval

This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and should not be used.

QtechBfdIntervalTCr/w

Constraints:
range: 0-30

Textual Convention: QtechBfdIntervalTC Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.24

qtechBfdSessReqMinRxInterval

This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not w…

QtechBfdIntervalTCr/w

Textual Convention: QtechBfdIntervalTC Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.25

qtechBfdSessReqMinEchoRxInterval

This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. Value must be zero(0) if
this is a multihop BFD session.

QtechBfdIntervalTCr/w

Textual Convention: QtechBfdIntervalTC Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.26

qtechBfdSessDetectMult

This object specifies the Detect time multiplier.

QtechBfdMultiplierTCr/w

Textual Convention: QtechBfdMultiplierTC Unsigned32

Type Constraints:
range: 1..255

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.27

qtechBfdSessNegotiatedInterval

This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD Control packets.

QtechBfdIntervalTC

Textual Convention: QtechBfdIntervalTC Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.28

qtechBfdSessNegotiatedEchoInterval

This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD echo packets. Value is expected to be zero if
the sessions is not running in echo mode.

QtechBfdIntervalTC

Textual Convention: QtechBfdIntervalTC Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.29

qtechBfdSessNegotiatedDetectMult

This object specifies the Detect time multiplier.

QtechBfdMultiplierTC

Textual Convention: QtechBfdMultiplierTC Unsigned32

Type Constraints:
range: 1..255

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.30

qtechBfdSessAuthPresFlag

This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(2) if not.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.31

qtechBfdSessAuthenticationType

The Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication related objects are set to
read-create in…

QtechBfdSessAuthenticationTypeTCr/w

Enumerated Values:

0	disable
1	sampling
2	active
3	panic

Textual Convention: QtechBfdSessAuthenticationTypeTC Enumeration

Type Values:

-1	noAuthentication
0	reserved
1	simplePassword
2	keyedMD5
3	meticulousKeyedMD5
4	keyedSHA1
5	meticulousKeyedSHA1

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.32

qtechBfdSessAuthenticationKeyID

The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
When qtechBfdSessAuthPresFlag is false(2), then the value
of this object MUST be -1. The value -1 indic…

Integer32r/w

Constraints:
range: -1-255
range: 0-80

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.33

qtechBfdSessAuthenticationKey

The authentication key. When the
qtechBfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.

When the qtechBfdSessAuthentication type is one …

QtechBfdSessionAuthenticationKeyTCr/w

Textual Convention: QtechBfdSessionAuthenticationKeyTC OctetString

Type Constraints:
range: 0..252

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.34

qtechBfdSessStorageType

This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row.

SNMPv2-TCStorageTyper/w

Enumerated Values:

1	drop
2	forward
6	default

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.35

qtechBfdSessRowStatus

This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except the
qtechBfdSessRowStatus and qtechBfd…

SNMPv2-TCRowStatusr/w

Enumerated Values:

1	n-a
2	low
3	medium
4	high

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.27514.1.1.10.2.48.1.2.1.36

qtechBfdSessPerfTable

table

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3 · 1 row entry · 19 columns

Open in standard view

This table specifies BFD Session performance counters.

qtechBfdSessPerfEntry entry .1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1

An entry in this table is created by a BFD-enabled node
for every BFD Session. qtechBfdSessPerfDiscTime is used to
indicate potential discontinuity for all counter objects
in this table.

Indexes

IDS-MIBrsIDSSLTACTFilterGroupName

Column Syntax OID

qtechBfdSessPerfCtrlPktIn

The total number of BFD control messages received for this
BFD session. This value MUST be equal to the least
significant 32 bits of qtechBfdSessPerfCtrlPktInHC.

SNMPv2-SMICounter32

Constraints:
range: 0-30

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.1

qtechBfdSessPerfCtrlPktOut

The total number of BFD control messages sent for this BFD
session.

It MUST be equal to the least significant 32 bits of
significant 32 bits of qtechBfdSessPerfCtrlPktOutHC
if supported, and MUST do so t…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.2

qtechBfdSessPerfCtrlPktDrop

The total number of BFD control messages received for this
session yet dropped for being invalid.

It MUST be equal to the least significant 32 bits of
significant 32 bits of qtechBfdSessPerfCtrlPktDropHC…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.3

qtechBfdSessPerfCtrlPktDropLastTime

The value of sysUpTime on the most recent occasion at
which received BFD control message for this session was
dropped. If no such up event exists, this object contains
a zero value.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.4

qtechBfdSessPerfEchoPktIn

The total number of BFD echo messages received for this
BFD session.

It MUST be equal to the least significant 32 bits of
significant 32 bits of qtechBfdSessPerfEchoPktInHC if
supported, and MUST do so …

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.5

qtechBfdSessPerfEchoPktOut

The total number of BFD echo messages sent for this BFD
session.

It MUST be equal to the least significant 32 bits of
qtechBfdSessPerfEchoPktOutHC if supported, and MUST do so
the rules spelled out in RF…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.6

qtechBfdSessPerfEchoPktDrop

The total number of BFD echo messages received for this
session yet dropped for being invalid.

It MUST be equal to the least significant 32 bits of
qtechBfdSessPerfEchoPktDropHC if supported, and MUST do…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.7

qtechBfdSessPerfEchoPktDropLastTime

The value of sysUpTime on the most recent occasion at
which received BFD echo message for this session was
dropped. If no such up event exists, this object contains
a zero value.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.8

qtechBfdSessUpTime

The value of sysUpTime on the most recent occasion at which
the session came up. If no such up event exists this object
contains a zero value.

SNMPv2-TCTimeStamp

Enumerated Values:

0	disable
1	sampling
2	active
3	panic

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.9

qtechBfdSessPerfLastSessDownTime

The value of sysUpTime on the most recent occasion at
which the last time communication was lost with the
neighbor. If no such down event exist this object
contains a zero value.

SNMPv2-TCTimeStamp

Constraints:
range: 0-80

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.10

qtechBfdSessPerfLastCommLostDiag

The BFD diag code for the last time communication was lost
with the neighbor. If no such down event exists this object
contains a zero value.

QtechBfdDiagTC

Textual Convention: QtechBfdDiagTC Enumeration

Type Values:

0	noDiagnostic
1	controlDetectionTimeExpired
2	echoFunctionFailed
3	neighborSignaledSessionDown
4	forwardingPlaneReset
5	pathDown
6	concatenatedPathDown
7	administrativelyDown
8	reverseConcatenatedPathDown

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.11

qtechBfdSessPerfSessUpCount

The number of times this session has gone into the Up
state since the system last rebooted.

SNMPv2-SMICounter32

Enumerated Values:

1	drop
2	forward
6	default

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.12

qtechBfdSessPerfDiscTime

The value of sysUpTime on the most recent occasion at
which any one or more of the session counters suffered
a discontinuity.

The relevant counters are the specific instances associated
with this BFD sess…

SNMPv2-TCTimeStamp

Enumerated Values:

1	n-a
2	low
3	medium
4	high

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.13

qtechBfdSessPerfCtrlPktInHC

This value represents the total number of BFD control
messages received for this BFD session.

It MUST be equal to the least significant 32 bits of
qtechBfdSessPerfCtrlPktInHC if supported, and MUST do so…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.14

qtechBfdSessPerfCtrlPktOutHC

This value represents the total number of BFD control
messages transmitted for this BFD session.

It MUST be equal to the least significant 32 bits of
qtechBfdSessPerfCtrlPktOut if supported, and MUST do s…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.15

qtechBfdSessPerfCtrlPktDropHC

This value represents the total number of BFD control
messages received for this BFD session yet dropped for
being invalid.

It MUST be equal to the least significant 32 bits of
qtechBfdSessPerfCtrlPktDrop…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.16

qtechBfdSessPerfEchoPktInHC

This value represents the total number of BFD echo
messages received for this BFD session.

It MUST be equal to the least significant 32 bits of
qtechBfdSessPerfEchoPktIn if supported, and MUST do so
the r…

SNMPv2-SMICounter64

Constraints:
range: 0-20

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.17

qtechBfdSessPerfEchoPktOutHC

This value represents the total number of BFD echo
messages transmitted for this BFD session.

It MUST be equal to the least significant 32 bits of
qtechBfdSessPerfEchoPktOut if supported, and MUST do so
t…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.18

qtechBfdSessPerfEchoPktDropHC

This value represents the total number of BFD echo
messages received for this BFD session yet dropped
for being invalid.

It MUST be equal to the least significant 32 bits of
qtechBfdSessPerfEchoPktDrop if…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.27514.1.1.10.2.48.1.3.1.19

qtechBfdSessDiscMapTable

table

.1.3.6.1.4.1.27514.1.1.10.2.48.1.4 · 1 row entry · 3 columns

Open in standard view

The BFD Session Discriminator Mapping Table maps a
local discriminator value to associated BFD session's
QtechBfdSessIndexTC used in the qtechBfdSessionTable.

qtechBfdSessDiscMapEntry entry .1.3.6.1.4.1.27514.1.1.10.2.48.1.4.1

The BFD Session Discriminator Map Entry describes
BFD session that is mapped to this QtechBfdSessIndexTC.

Indexes

qtechBfdSessDiscriminator

Column Syntax OID

qtechBfdSessDiscMapIndex

This object specifies the QtechBfdSessIndexTC referred to by
the indices of this row. In essence, a mapping is
provided between these indexes and the QtechBfdSessTable.

QtechBfdSessIndexTC

Textual Convention: QtechBfdSessIndexTC Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.4.1.1

qtechBfdSessDiscMapStorageType

This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row.

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.27514.1.1.10.2.48.1.4.1.2

qtechBfdSessDiscMapRowStatus

SNMPv2-TCRowStatusr/w

Constraints:
range: 0-9

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.27514.1.1.10.2.48.1.4.1.3

qtechBfdSessIpMapTable

table

.1.3.6.1.4.1.27514.1.1.10.2.48.1.5 · 1 row entry · 3 columns

Open in standard view

The BFD Session IP Mapping Table maps given
qtechBfdSessInterface, qtechBfdSessSrcAddrType, qtechBfdSessSrcAddr,
qtechBfdSessDstAddrType and qtechBfdSessDstAddr
to an associated BFD session's QtechBfdSessIndexTC used in
the qtechBfdSessionTable.

qtechBfdSessIpMapEntry entry .1.3.6.1.4.1.27514.1.1.10.2.48.1.5.1

The BFD Session IP Map Entry describes
BFD session that is mapped to this QtechBfdSessIndexTC.

Indexes

qtechBfdSessInterface qtechBfdSessSrcAddrType qtechBfdSessSrcAddr qtechBfdSessDstAddrType qtechBfdSessDstAddr

Column Syntax OID

qtechBfdSessIpMapIndex

This object specifies the QtechBfdSessIndexTC referred to by
the indexes of this row. In essence, a mapping is
provided between these indexes and the QtechBfdSessTable.

QtechBfdSessIndexTC

Constraints:
range: 0-11

Textual Convention: QtechBfdSessIndexTC Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.48.1.5.1.1

qtechBfdSessIpMapStorageType

This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row.

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.27514.1.1.10.2.48.1.5.1.2

qtechBfdSessIpMapRowStatus

SNMPv2-TCRowStatusr/w

Constraints:
range: 0-80

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.27514.1.1.10.2.48.1.5.1.3