PowerConnect3248-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

130

switchInfoTable

table

.1.3.6.1.4.1.674.10895.3.1.1.3 · 1 row entry · 13 columns

Open in standard view

Table of descriptive and status information about
switches in this system.

switchInfoEntry entry .1.3.6.1.4.1.674.10895.3.1.1.3.1

An entry in the table, containing information
about a single switch in this system.

Indexes

swUnitIndex

Column Syntax OID

swUnitIndex

This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.1.3.1.1

swHardwareVer

Hardware version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.674.10895.3.1.1.3.1.2

swMicrocodeVer

Microcode version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.674.10895.3.1.1.3.1.3

swLoaderVer

Loader version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.674.10895.3.1.1.3.1.4

swBootRomVer

Boot ROM code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.674.10895.3.1.1.3.1.5

swOpCodeVer

Operation code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.674.10895.3.1.1.3.1.6

swPortNumber

The total port number of this switch
(including expansion slot).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.1.3.1.7

swPowerStatus

Indicates the switch using internalPower(1),
redundantPower(2) or both(3)

Enumeration

Enumerated Values:

1	internalPower
2	redundantPower
3	internalAndRedundantPower

.1.3.6.1.4.1.674.10895.3.1.1.3.1.8

swRoleInSystem

Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system.

Enumeration

Enumerated Values:

1	master
2	backupMaster
3	slave

.1.3.6.1.4.1.674.10895.3.1.1.3.1.9

swSerialNumber

Serial number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.674.10895.3.1.1.3.1.10

swExpansionSlot1

Type of expansion module in this switch slot 1.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp

.1.3.6.1.4.1.674.10895.3.1.1.3.1.11

swExpansionSlot2

Type of expansion module in this switch slot 2.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp

.1.3.6.1.4.1.674.10895.3.1.1.3.1.12

swServiceTag

Service tag serial-number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.674.10895.3.1.1.3.1.13

portTable

table

.1.3.6.1.4.1.674.10895.3.1.2.1 · 1 row entry · 10 columns

Open in standard view

Table of descriptive and status information about
configuration of each switch port (including expansion slot)
in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel).

portEntry entry .1.3.6.1.4.1.674.10895.3.1.2.1.1

An entry in the table, containing information
about configuration in one switch port of the switch.

Indexes

portIndex

Column Syntax OID

portIndex

This is defined as ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.2.1.1.1

portName

Indicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later).

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.674.10895.3.1.2.1.1.2

portType

Indicates the port type.

Enumeration

Enumerated Values:

1	other
2	hundredBaseTX
3	hundredBaseFX
4	thousandBaseSX
5	thousandBaseLX
6	thousandBaseT
7	thousandBaseGBIC
8	thousandBaseSfp

.1.3.6.1.4.1.674.10895.3.1.2.1.1.3

portSpeedDpxCfg

Set the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100…

Enumerationr/w

Enumerated Values:

1	reserved
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000

.1.3.6.1.4.1.674.10895.3.1.2.1.1.4

portFlowCtrlCfg

(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	backPressure
4	dot3xFlowControl

.1.3.6.1.4.1.674.10895.3.1.2.1.1.5

portCapabilities

Port capabilities.

Bitsr/w

Enumerated Values:

0	portCap10half
1	portCap10full
2	portCap100half
3	portCap100full
4	portCap1000half
5	portCap1000full
6	reserved6
7	reserved7
8	reserved8
9	reserved9
10	reserved10
11	reserved11
12	reserved12
13	reserved13
14	portCapSym
15	portCapFlowCtrl

.1.3.6.1.4.1.674.10895.3.1.2.1.1.6

portAutonegotiation

Whether autonegotiation is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.674.10895.3.1.2.1.1.7

portSpeedDpxStatus

The operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this …

Enumeration

Enumerated Values:

1	error
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000

.1.3.6.1.4.1.674.10895.3.1.2.1.1.8

portFlowCtrlStatus

(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, thi…

Enumeration

Enumerated Values:

1	error
2	backPressure
3	dot3xFlowControl
4	none

.1.3.6.1.4.1.674.10895.3.1.2.1.1.9

portTrunkIndex

The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to trunk at trunkIndex, defined by the
corresponding trunkPort…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.2.1.1.10

trunkTable

table

.1.3.6.1.4.1.674.10895.3.1.3.3 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information about
configuration of each trunk,
similar to Cisco EtherChannel.

trunkEntry entry .1.3.6.1.4.1.674.10895.3.1.3.3.1

An entry in the table, containing information
about configuration in one trunk of the switch.

Indexes

trunkIndex

Column Syntax OID

trunkIndex

This object identifies the trunk within the switch
for which this entry contains information.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.3.3.1.1

trunkPorts

The complete set of ports currently associated with
this trunk.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.674.10895.3.1.3.3.1.2

trunkCreation

A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk.

Enumeration

Enumerated Values:

1	static
2	lacp

.1.3.6.1.4.1.674.10895.3.1.3.3.1.3

trunkStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.674.10895.3.1.3.3.1.4

lacpPortTable

table

.1.3.6.1.4.1.674.10895.3.1.4.1 · 1 row entry · 2 columns

Open in standard view

Table for LACP port configuration.

lacpPortEntry entry .1.3.6.1.4.1.674.10895.3.1.4.1.1

Entry for LACP port configuration.

Indexes

lacpPortIndex

Column Syntax OID

lacpPortIndex

This is defined as ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.4.1.1.1

lacpPortStatus

Whether 802.3ad LACP is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.674.10895.3.1.4.1.1.2

staPortTable

table

.1.3.6.1.4.1.674.10895.3.1.5.2 · 1 row entry · 8 columns

Open in standard view

The table manages port settings for Spanning Tree 
Protocol 802.1d, 802.1w or 802.1s depending on the 
value specified by staProtocolType.

staPortEntry entry .1.3.6.1.4.1.674.10895.3.1.5.2.1

The conceptual entry of staPortTable.

Indexes

staPortIndex

Column Syntax OID

staPortIndex

The port and the trunk (excluding trunk member ports)
interface of the staPortTable. The interface identified
by a particular value of this index is the same interface
as identified by the same value of dot1dStpPort i…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.5.2.1.1

staPortFastForward

Whether fast forwarding is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.674.10895.3.1.5.2.1.2

staPortProtocolMigration

When operating in RSTP (version 2) mode, writing TRUE(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns FALSE(2) when read.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.674.10895.3.1.5.2.1.3

staPortAdminEdgePort

The administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.674.10895.3.1.5.2.1.4

staPortOperEdgePort

The operational value of the Edge Port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set FALSE
when a BPDU is received.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.674.10895.3.1.5.2.1.5

staPortAdminPointToPoint

The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of f…

Enumerationr/w

Enumerated Values:

0	forceTrue
1	forceFalse
2	auto

.1.3.6.1.4.1.674.10895.3.1.5.2.1.6

staPortOperPointToPoint

The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-det…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.674.10895.3.1.5.2.1.7

staPortLongPathCost

The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This object is used to configure the spanning tree port
path cost in 32 b…

Integer32r/w

Constraints:
range: 1-200000000

.1.3.6.1.4.1.674.10895.3.1.5.2.1.8

xstInstanceCfgTable

table

.1.3.6.1.4.1.674.10895.3.1.5.6.4 · 1 row entry · 16 columns

Open in standard view

This table is used to configure the property of a specific 
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0.

xstInstanceCfgEntry entry .1.3.6.1.4.1.674.10895.3.1.5.6.4.1

A conceptual row containing the property of the MST or RST instance.

Indexes

xstInstanceCfgIndex

Column Syntax OID

xstInstanceCfgIndex

An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance.

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.1

xstInstanceCfgPriority

The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096.

Integer32r/w

Constraints:
range: 0-61440

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.2

xstInstanceCfgTimeSinceTopologyChange

The time (in hundredths of second) since the last topology
change detected by the bridge entity in MST or RST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.3

xstInstanceCfgTopChanges

The total number of topology changes detected by
this bridge in MST or RST since the management entity
was last reset or initialized.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.4

xstInstanceCfgDesignatedRoot

The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol (1s)
or Rapid Spanning Tree Protocol (1w) executed by this node.
This value is used as the Root Identifier pa…

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.5

xstInstanceCfgRootCost

The cost of the path to the root as seen from
this bridge of the MST or RST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.6

xstInstanceCfgRootPort

The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the MST or RST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.7

xstInstanceCfgMaxAge

The maximum age of Multiple Spanning Tree Protocol (1s)
or Rapid Spanning Tree Protocol (1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is the ac…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.8

xstInstanceCfgHelloTime

The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.9

xstInstanceCfgHoldTime

This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.10

xstInstanceCfgForwardDelay

For MST or RST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the Forwarding
state. The value determines how long the p…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.11

xstInstanceCfgBridgeMaxAge

For MST or RST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the …

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.12

xstInstanceCfgBridgeHelloTime

For MST or RST protocol,the time (in hundredths of second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.13

xstInstanceCfgBridgeForwardDelay

For MST or RST protocol, the time (in hundredths of second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.14

xstInstanceCfgTxHoldCount

For MST or RST protocol, the value used by the Port Transmit
state machine to limit the maximum transmission rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.15

xstInstanceCfgPathCostMethod

For MST or RST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.

When the value o…

Enumeration

Enumerated Values:

1	short
2	long

.1.3.6.1.4.1.674.10895.3.1.5.6.4.1.16

xstInstancePortTable

table

.1.3.6.1.4.1.674.10895.3.1.5.6.5 · 1 row entry · 12 columns

Open in standard view

The extension table for dot1dStpPortEntry to provide 
additional Spanning Tree information and configuration.

xstInstancePortEntry entry .1.3.6.1.4.1.674.10895.3.1.5.6.5.1

The conceptual row for xstInstancePortTable.

Indexes

xstInstancePortInstance xstInstancePortPort

Column Syntax OID

xstInstancePortInstance

The instance of the MSTP.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.1

xstInstancePortPort

The port and the trunk (excluding trunk member ports)
interface of the mstInstancePortTable. The interface identified
by a particular value of this index is the same interface
as identified by the same value of dot1dS…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.2

xstInstancePortPriority

Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active li…

Integer32r/w

Constraints:
range: 0-240

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.3

xstInstancePortState

The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1) Port receives configuration messages,
…

Enumeration

Enumerated Values:

1	discarding
2	learning
3	forwarding

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.4

xstInstancePortEnable

The enabled/disabled status of the port.

P-BRIDGE-MIBEnabledStatus

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.5

xstInstancePortPathCost

The pathcost of the MST or RST in the range 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher va…

Integer32r/w

Constraints:
range: 1-200000000

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.6

xstInstancePortDesignatedRoot

The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.7

xstInstancePortDesignatedCost

The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.8

xstInstancePortDesignatedBridge

The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.9

xstInstancePortDesignatedPort

The Port Identifier of the port on the Designated
Bridge for this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.10

xstInstancePortForwardTransitions

The number of times this port has transitioned
from the Learning state to the Forwarding state.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.11

xstInstancePortPortRole

The role of the port in the MST or RST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port …

Enumeration

Enumerated Values:

1	disabled
2	root
3	designated
4	alternate
5	backup
6	master

.1.3.6.1.4.1.674.10895.3.1.5.6.5.1.12

mirrorTable

table

.1.3.6.1.4.1.674.10895.3.1.8.1 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information about
switches in this system.

mirrorEntry entry .1.3.6.1.4.1.674.10895.3.1.8.1.1

An entry in the table, containing information
about a single switch in this system.

Indexes

mirrorDestinationPort mirrorSourcePort

Column Syntax OID

mirrorDestinationPort

Destination port for mirrored packets. This is defined
as ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.8.1.1.1

mirrorSourcePort

Source port for mirrored packets. This is defined as
ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.8.1.1.2

mirrorType

If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets.

Enumerationr/w

Enumerated Values:

1	rx
2	tx
3	both

.1.3.6.1.4.1.674.10895.3.1.8.1.1.3

mirrorStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.674.10895.3.1.8.1.1.4

igmpSnoopRouterCurrentTable

table

.1.3.6.1.4.1.674.10895.3.1.9.8 · 1 row entry · 3 columns

Open in standard view

Table for current router ports.

igmpSnoopRouterCurrentEntry entry .1.3.6.1.4.1.674.10895.3.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.674.10895.3.1.9.8.1.1`
igmpSnoopRouterCurrentPorts The set of ports which are current router ports. Within this list, some router ports are static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.674.10895.3.1.9.8.1.2`
igmpSnoopRouterCurrentStatus The set of ports which are static router ports.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.674.10895.3.1.9.8.1.3`

igmpSnoopRouterStaticTable

table

.1.3.6.1.4.1.674.10895.3.1.9.9 · 1 row entry · 3 columns

Open in standard view

Table for static router ports.

igmpSnoopRouterStaticEntry entry .1.3.6.1.4.1.674.10895.3.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column Syntax OID

igmpSnoopRouterStaticVlanIndex

This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.674.10895.3.1.9.9.1.1

igmpSnoopRouterStaticPorts

The set of ports which are static router ports.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.674.10895.3.1.9.9.1.2

igmpSnoopRouterStaticStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.674.10895.3.1.9.9.1.3

igmpSnoopMulticastCurrentTable

table

.1.3.6.1.4.1.674.10895.3.1.9.10 · 1 row entry · 4 columns

Open in standard view

Table for current multicast addresses.

igmpSnoopMulticastCurrentEntry entry .1.3.6.1.4.1.674.10895.3.1.9.10.1

Entry for current multicast addresses.

Indexes

igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress

Column	Syntax	OID
igmpSnoopMulticastCurrentVlanIndex This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.674.10895.3.1.9.10.1.1`
igmpSnoopMulticastCurrentIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.674.10895.3.1.9.10.1.2`
igmpSnoopMulticastCurrentPorts The set of ports which are members.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.674.10895.3.1.9.10.1.3`
igmpSnoopMulticastCurrentStatus The set of ports which are static members.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.674.10895.3.1.9.10.1.4`

igmpSnoopMulticastStaticTable

table

.1.3.6.1.4.1.674.10895.3.1.9.11 · 1 row entry · 4 columns

Open in standard view

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry entry .1.3.6.1.4.1.674.10895.3.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column Syntax OID

igmpSnoopMulticastStaticVlanIndex

This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.674.10895.3.1.9.11.1.1

igmpSnoopMulticastStaticIpAddress

IP address of multicast group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.674.10895.3.1.9.11.1.2

igmpSnoopMulticastStaticPorts

The set of ports which are members.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.674.10895.3.1.9.11.1.3

igmpSnoopMulticastStaticStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.674.10895.3.1.9.11.1.4

netConfigTable

table

.1.3.6.1.4.1.674.10895.3.1.10.1 · 1 row entry · 6 columns

Open in standard view

A table of netConfigEntries.

netConfigEntry entry .1.3.6.1.4.1.674.10895.3.1.10.1.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

netConfigIfIndex netConfigIPAddress netConfigSubnetMask

Column Syntax OID

netConfigIfIndex

VLAN interface on which this entry is defined.
This is defined as ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.10.1.1.1

netConfigIPAddress

The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure ou…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.674.10895.3.1.10.1.1.2

netConfigSubnetMask

The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure o…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.674.10895.3.1.10.1.1.3

netConfigPrimaryInterface

Whether this is a primary interface.

Enumerationr/w

Enumerated Values:

1	primary
2	secondary

.1.3.6.1.4.1.674.10895.3.1.10.1.1.4

netConfigUnnumbered

Whether this is an unnumbered interface.

Enumerationr/w

Enumerated Values:

1	unnumbered
2	notUnnumbered

.1.3.6.1.4.1.674.10895.3.1.10.1.1.5

netConfigStatus

The status of this netConfigEntry.

An entry may not exist in the active state unless all
objects in the entry have an appropriate value.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.674.10895.3.1.10.1.1.6

bcastStormTable

table

.1.3.6.1.4.1.674.10895.3.1.11.1 · 1 row entry · 6 columns

Open in standard view

Table of descriptive and status information about
configuration of each switch ports(including expansion slot)
in this system.

bcastStormEntry entry .1.3.6.1.4.1.674.10895.3.1.11.1.1

An entry in the table, containing information
about configuration in one switch port of the switch.

Indexes

bcastStormIfIndex

Column Syntax OID

bcastStormIfIndex

This is defined as ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.11.1.1.1

bcastStormStatus

Whether broadcast storm protection is enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.674.10895.3.1.11.1.1.2

bcastStormSampleType

Sample type. If this is pkt-rate(1), then
bcastStormPktRate is valid. If this is octet-rate(2),
then bcastStormOctetRate is valid. If this is percent(3),
then bcastStormPercent is valid.

Enumerationr/w

Enumerated Values:

1	pkt-rate
2	octet-rate
3	percent

.1.3.6.1.4.1.674.10895.3.1.11.1.1.3

bcastStormPktRate

Broadcast storm threshold as packets per second.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.11.1.1.4

bcastStormOctetRate

Broadcast storm threshold as octets per second.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.11.1.1.5

bcastStormPercent

Broadcast storm threshold as percentage of bandwidth.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.11.1.1.6

vlanTable

table

.1.3.6.1.4.1.674.10895.3.1.12.1 · 1 row entry · 2 columns

Open in standard view

Table for VLAN configuration.

vlanEntry entry .1.3.6.1.4.1.674.10895.3.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column Syntax OID

vlanIndex

Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.674.10895.3.1.12.1.1.1

vlanAddressMethod

Method to get the IP address.

Enumerationr/w

Enumerated Values:

1	user
2	bootp
3	dhcp

.1.3.6.1.4.1.674.10895.3.1.12.1.1.2

vlanPortTable

table

.1.3.6.1.4.1.674.10895.3.1.12.2 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in VLAN.

vlanPortEntry entry .1.3.6.1.4.1.674.10895.3.1.12.2.1

Entry for port configuration in VLAN.

Indexes

vlanPortIndex

Column Syntax OID

vlanPortIndex

This is defined as ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.12.2.1.1

vlanPortMode

This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to access(3) sets an access link.

Enumerationr/w

Enumerated Values:

1	hybrid
2	dot1qTrunk
3	access

.1.3.6.1.4.1.674.10895.3.1.12.2.1.2

prioIpPrecTable

table

.1.3.6.1.4.1.674.10895.3.1.13.2 · 1 row entry · 3 columns

Open in standard view

Table for IP precedence priority mapping.

prioIpPrecEntry entry .1.3.6.1.4.1.674.10895.3.1.13.2.1

Entry for IP precendence priority mapping.

Indexes

prioIpPrecPort prioIpPrecValue

Column	Syntax	OID
prioIpPrecPort This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.674.10895.3.1.13.2.1.2`
prioIpPrecValue Precedence value for this entry.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.674.10895.3.1.13.2.1.3`
prioIpPrecCos Class of service for this entry.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.674.10895.3.1.13.2.1.4`

prioIpDscpTable

table

.1.3.6.1.4.1.674.10895.3.1.13.4 · 1 row entry · 3 columns

Open in standard view

Table for IP DSCP priority mapping.

prioIpDscpEntry entry .1.3.6.1.4.1.674.10895.3.1.13.4.1

Entry for IP DSCP priority mapping.

Indexes

prioIpDscpPort prioIpDscpValue

Column	Syntax	OID
prioIpDscpPort This is defined as ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.674.10895.3.1.13.4.1.1`
prioIpDscpValue DSCP value for this entry.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.674.10895.3.1.13.4.1.2`
prioIpDscpCos Class of service for this entry.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.674.10895.3.1.13.4.1.3`

prioIpPortTable

table

.1.3.6.1.4.1.674.10895.3.1.13.7 · 1 row entry · 4 columns

Open in standard view

Table for IP port priority mapping.

prioIpPortEntry entry .1.3.6.1.4.1.674.10895.3.1.13.7.1

Entry for IP port priority mapping.

Indexes

prioIpPortPhysPort prioIpPortValue

Column Syntax OID

prioIpPortPhysPort

This is defined as ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.13.7.1.1

prioIpPortValue

IP port for this value.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.674.10895.3.1.13.7.1.2

prioIpPortCos

Class of service for this entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.674.10895.3.1.13.7.1.3

prioIpPortStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.674.10895.3.1.13.7.1.4

prioWrrTable

table

.1.3.6.1.4.1.674.10895.3.1.13.9 · 1 row entry · 2 columns

Open in standard view

Table for weighted round robin (WRR).

prioWrrEntry entry .1.3.6.1.4.1.674.10895.3.1.13.9.1

Entry for weighted round robin (WRR).

Indexes

prioWrrTrafficClass

Column	Syntax	OID
prioWrrTrafficClass Traffic class for this entry, as defined in dot1dTrafficClass in the Q-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.674.10895.3.1.13.9.1.1`
prioWrrWeight Weight for this entry.	Integer32r/w Constraints: `range: 1-255`	`.1.3.6.1.4.1.674.10895.3.1.13.9.1.2`

trapDestTable

table

.1.3.6.1.4.1.674.10895.3.1.14.1 · 1 row entry · 4 columns

Open in standard view

A list of trap destination entries.

trapDestEntry entry .1.3.6.1.4.1.674.10895.3.1.14.1.1

This entry includes a destination IP address to which to send
traps for this community.

Indexes

trapDestAddress

Column Syntax OID

trapDestAddress

The address to send traps.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.674.10895.3.1.14.1.1.1

trapDestCommunity

A community to which this destination address belongs.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.674.10895.3.1.14.1.1.2

trapDestStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.

Enumerationr/w

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.674.10895.3.1.14.1.1.3

trapDestVersion

This variables represent the version of the Trap we wish to send to trap Receiver,
if the value is 1, mean we wish to send Version 1 trap, if the value is 2,
mean we wish to send version 2 trap.

Enumerationr/w

Enumerated Values:

1	version1
2	version2

.1.3.6.1.4.1.674.10895.3.1.14.1.1.4

portSecPortTable

table

.1.3.6.1.4.1.674.10895.3.1.17.2.1 · 1 row entry · 3 columns

Open in standard view

The Port Security(MAC bindind) Table

portSecPortEntry entry .1.3.6.1.4.1.674.10895.3.1.17.2.1.1

The entry of portSecPortTable

Indexes

portSecPortIndex

Column Syntax OID

portSecPortIndex

The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.17.2.1.1.1

portSecPortStatus

Set enabled(1) to enable port security and set disabled(2) to
disable port security.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.674.10895.3.1.17.2.1.1.2

portSecAction

The corresponding actions that will take place when a
port is under intruded, when this variable is set to
none(1), no action will perform, when this variable is
set to trap(2), a swPortSecurityTrap trap will send,
…

Enumerationr/w

Enumerated Values:

1	none
2	trap
3	shutdown
4	trapAndShutdown

.1.3.6.1.4.1.674.10895.3.1.17.2.1.1.3

sshConnInfoTable

table

.1.3.6.1.4.1.674.10895.3.1.17.6.6 · 1 row entry · 7 columns

Open in standard view

The table for Secure Shell Connection.

sshConnInfoEntry entry .1.3.6.1.4.1.674.10895.3.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column Syntax OID

sshConnID

The connection ID of the Secure Shell Connection.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.1

sshConnMajorVersion

The SSH major version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.2

sshConnMinorVersion

The SSH minor version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.3

sshConnEncryptionType

The encryption type of the SSH. none(1) mean no encrytion
, des(2) mean using DES encrytion, tribeDes mean using
3DES encrytion.

Enumeration

Enumerated Values:

1	none
2	des
3	tribeDes

.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.4

sshConnStatus

The SSH connection State. negotiationStart(1) mean the
SSH is in its negotiation start state, authenticationStart(2)
mean the SSH is in authentication start state, sessionStart(3)
mean the SSH is in session start State.

Enumeration

Enumerated Values:

1	negotiationStart
2	authenticationStart
3	sessionStart

.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.5

sshConnUserName

The user name of the connection.

OctetString

.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.6

sshDisconnect

Set the variables to disconnect to disconnect the connection,
when read, this variables always return noDisconnect(1).

Enumerationr/w

Enumerated Values:

1	noDisconnect
2	disconnect

.1.3.6.1.4.1.674.10895.3.1.17.6.6.1.7

remoteLogServerTable

table

.1.3.6.1.4.1.674.10895.3.1.19.6.4 · 1 row entry · 2 columns

Open in standard view

A Table for storing the remote log Server list.

remoteLogServerEntry entry .1.3.6.1.4.1.674.10895.3.1.19.6.4.1

A conceptually row for remoteLogServerTable.

Indexes

remoteLogServerIp

Column Syntax OID

remoteLogServerIp

The IP address of the remote log Server.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.674.10895.3.1.19.6.4.1.1

remoteLogServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.674.10895.3.1.19.6.4.1.2