PW-ATM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
58

pwAtmOutboundTable

table
.1.3.6.1.2.1.183.1.1 · 1 row entry · 5 columns
Open in standard view 
This table specifies the information for an ATM PW to
be carried over the PSN in the outbound direction.  An
entry is created in this table for every entry in
the pwTable with a pwType equal to one of the following:
atmAal5SduVcc(2), atmCell1to1Vcc(12), atmCell1to1Vpc(13)
or atmAal5PduVcc(14), or atmTransparent(3).
pwAtmOutboundEntry entry .1.3.6.1.2.1.183.1.1.1
A row in this table represents an ATM PW that needs to be
adapted and carried over the PSN. This table is indexed by

pwIndex from pwTable. Unless otherwise specified, all
writeable objects in this table M…
Indexes
PW-STD-MIBpwIndex
Column Syntax OID
pwAtmOutboundAtmIf
The ATM Interface that receives cells from the ATM
network.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.2.1.183.1.1.1.1
pwAtmOutboundVpi
VPI value of this ATM PW. The value may indicate the
translated value when egress generates new VPI.
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.183.1.1.1.2
pwAtmOutboundVci
VCI value of this ATM PW. The value may indicate the
translated value when egress generates new VCI.
ATM-TC-MIBAtmVcIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.2.1.183.1.1.1.3
pwAtmOutboundTrafficParamDescr
This object represents a pointer to an ATM
traffic-parameter-specific row in either a private or
standard table that will be employed while receiving
cells from the ATM network. This row should contain a
set of self-co…
SNMPv2-TCRowPointerr/w
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.2.1.183.1.1.1.4
pwAtmOutboundRowStatus
This object is used to create, modify, or delete a row in
this table. Unless otherwise specified, all writeable
objects in this table MUST NOT be changed after row
activation as explained in the pwAtmOutboundEntry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.183.1.1.1.5

pwAtmInboundTable

table
.1.3.6.1.2.1.183.1.3 · 1 row entry · 5 columns
Open in standard view 
This table specifies the information for an ATM PW in the
inbound direction.
pwAtmInboundEntry entry .1.3.6.1.2.1.183.1.3.1
A row in this table represents an ATM PW that needs to be
sent into the ATM network after reconstructing cells from
packets received from a PSN. This table is indexed by
pwIndex from pwTable. An entry is created in th…
Indexes
PW-STD-MIBpwIndex
Column Syntax OID
pwAtmInboundAtmIf
The ATM Interface that sends cells into the ATM network
after reconstructing cells from packets received from
a PSN.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.2.1.183.1.3.1.1
pwAtmInboundVpi
VPI value of this ATM PW.
If the pwType is atmTransparent, then the value will
be set to zero.
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.183.1.3.1.2
pwAtmInboundVci
VCI value of this ATM PW.
If the pwType is atmTransparent, atmCell1to1Vpc, or
atmCellNto1Vpc, then the value will be set to zero.
ATM-TC-MIBAtmVcIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.2.1.183.1.3.1.3
pwAtmInboundTrafficParamDescr
This object represents a pointer to an ATM traffic-parameter-
specific row in either a private or standard table that will
be employed while transmitting into the ATM network. This
table contains a set of self-consiste…
SNMPv2-TCRowPointerr/w
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.2.1.183.1.3.1.4
pwAtmInboundRowStatus
This object is used to create, modify, or delete a row in
this table. Unless otherwise specified, all writeable
objects in this table MUST NOT be changed after row
activation as explained in the pwAtmInboundEntry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.183.1.3.1.5

pwAtmCfgTable

table
.1.3.6.1.2.1.183.1.5 · 1 row entry · 4 columns
Open in standard view 
This table specifies generic information for an ATM PW
to be carried over PSN in any mode.
pwAtmCfgEntry entry .1.3.6.1.2.1.183.1.5.1
This table contains a set of parameters for
the ATM PW that needs to be adapted and carried
over the PSN. This table is indexed by pwIndex from
pwTable. An entry is created for every new ATM
type associated pwIndex in…
Indexes
PW-STD-MIBpwIndex
Column Syntax OID
pwAtmCfgMaxCellConcatenation
The maximum number of ATM cells that can be
concatenated into one PW packet towards the PSN.
In a non-LDP or other signaling protocol environment,
this object MAY be changed at anytime, but traffic
might be interrupted;…
Unsigned32r/w
Constraints:
range: 1-29
 .1.3.6.1.2.1.183.1.5.1.1
pwAtmCfgFarEndMaxCellConcatenation
The maximum number of ATM cells that can be
concatenated into one PW packet towards PSN as reported by
the far end. If there is no LDP in use, the object will
either return a value of 0 or allow setting it for calculat…
Unsigned32r/w
Constraints:
range: 1-29
 .1.3.6.1.2.1.183.1.5.1.2
pwAtmCfgTimeoutMode
This object determines whether or not a packet can be
transmitted to the PSN based on timeout expiration
for collecting cells. The actual handling of the
timeout is implementation-specific; as such,
this object may be …
Enumerationr/w
Enumerated Values:
1notApplicable
2disabled
3enabled
 .1.3.6.1.2.1.183.1.5.1.3
pwAtmClpQosMapping
This object indicates whether the Cell Loss Priority
(CLP) bits should be considered when setting the
value in the Quality-of-Service fields of the
encapsulating protocol (e.g., EXP fields of the
MPLS Label Stack). Sel…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.2.1.183.1.5.1.4

pwAtmOutboundNto1Table

table
.1.3.6.1.2.1.183.1.6 · 1 row entry · 7 columns
Open in standard view 
This table specifies the information for an ATM PW to
be carried over the PSN in the outbound direction.  Up to
N entries can be created in this table for every
          
entry in the pwTable with a pwType equal to:
atmCellNto1Vcc(9) or atmCellNto1Vpc(10).
An entry can be created only when the VP/VC are known.
A single entry will be created in this table for every
entry in the pwTable with a pwType equal to
one of the following: atmCell1to1Vcc(12),
atmCell1to1Vpc(13), atmAal5PduVcc(14),
atmAal5SduVcc(2), or atmTransparent(3).
pwAtmOutboundNto1Entry entry .1.3.6.1.2.1.183.1.6.1
A row in this table represents an ATM PW that needs to be
adapted and carried over PSN. This table is indexed by
pwIndex from pwTable and the ATM interface with VPL/VCLs.
In atmTransparent(3), Vpi and VCi will be 0xFFF…
Indexes
PW-STD-MIBpwIndex pwAtmOutboundNto1AtmIf pwAtmOutboundNto1Vpi pwAtmOutboundNto1Vci
Column Syntax OID
pwAtmOutboundNto1AtmIf
The ATM Interface that receives cells from the ATM network.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.2.1.183.1.6.1.1
pwAtmOutboundNto1Vpi
VPI value of this ATM PW. In atmTransparent(3),
Vpi will be the equivalent of 0xFFFF.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.183.1.6.1.2
pwAtmOutboundNto1Vci
VCI value of this ATM PW. In atmTransparent(3), or
the VP case, the value will be the equivalent of
0xFFFF.
ATM-TC-MIBAtmVcIdentifier
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.2.1.183.1.6.1.3
pwAtmOutboundNto1RowStatus
This object is used to create, modify or delete a row in
this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.183.1.6.1.4
pwAtmOutboundNto1TrafficParamDescr
This object represents a pointer to an ATM traffic-parameter-
specific row in either private or standard table that will
be employed while receiving cells from the ATM network.
This table should contain a set
of self-co…
SNMPv2-TCRowPointerr/w
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.2.1.183.1.6.1.5
pwAtmOutboundNto1MappedVpi
The egress-generated VPI value of this ATM PW. The

entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13). In other types, the value will be the
e…
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.183.1.6.1.6
pwAtmOutboundNto1MappedVci
The egress-generated VCI value of this ATM PW. The
entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13. In the VP case or other types, the
value will be the eq…
ATM-TC-MIBAtmVcIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.2.1.183.1.6.1.7

pwAtmInboundNto1Table

table
.1.3.6.1.2.1.183.1.7 · 1 row entry · 7 columns
Open in standard view 
This table specifies the information for an ATM PW to
be carried over PSN in the Inbound direction.  Up to
N entries can be created in this table for every
entry in the pwTable with a pwType equal to:
atmCellNto1Vcc(9) or atmCellNto1Vpc(10).
An entry can be created only when the VP/VC are known.
A single entry will be created in this table for every
entry in the pwTable with a pwType equal to
one of the following: atmCell1to1Vcc(12),
atmCell1to1Vpc(13), atmAal5PduVcc(14),
atmAal5SduVcc(2), or atmTransparent(3).
pwAtmInboundNto1Entry entry .1.3.6.1.2.1.183.1.7.1
A row in this table represents an ATM PW that needs to be
adapted and carried over PSN. This table is indexed by

pwIndex from pwTable and the ATM interface with VPL/VCLs.
In atmTransparent(3), Vpi and VCi …
Indexes
PW-STD-MIBpwIndex pwAtmInboundNto1AtmIf pwAtmInboundNto1Vpi pwAtmInboundNto1Vci
Column Syntax OID
pwAtmInboundNto1AtmIf
The ATM Interface that receives cells from the ATM network.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.2.1.183.1.7.1.1
pwAtmInboundNto1Vpi
VPI value of this ATM PW. In atmTransparent(3),
Vpi will be the equivalent of 0xFFFF.
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.183.1.7.1.2
pwAtmInboundNto1Vci
VCI value of this ATM PW. In atmTransparent(3), or
the VP case, the value will be the equivalent of
0xFFFF.
ATM-TC-MIBAtmVcIdentifier
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.2.1.183.1.7.1.3
pwAtmInboundNto1RowStatus
This object is used to create, modify, or delete a row in
this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.183.1.7.1.4
pwAtmInboundNto1TrafficParamDescr
This object represents a pointer to an ATM traffic-parameter-
specific row in either a private or standard table that will
be employed while receiving cells from the ATM network.
This table should contain a set
of self-…
SNMPv2-TCRowPointerr/w
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.2.1.183.1.7.1.5
pwAtmInboundNto1MappedVpi
The generated VPI value of this ATM PW. The
entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13). In other types, the value will be the
equivalent of 0xFFFF. …
ATM-TC-MIBAtmVpIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.2.1.183.1.7.1.6
pwAtmInboundNto1MappedVci
The generated VCI value of this ATM PW. The
entry is valid for PW type of atmCellNto1Vcc(9),
atmCellNto1Vpc(10), atmCell1to1Vcc(12), or
atmCell1to1Vpc(13. In the VP case or other types, the
value will be the equivalen…
ATM-TC-MIBAtmVcIdentifierr/w
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.2.1.183.1.7.1.7

pwAtmPerfCurrentTable

table
.1.3.6.1.2.1.183.1.8 · 1 row entry · 8 columns
Open in standard view 
The current 15-minute interval counts are in
this table.
This table provides performance information per ATM PW.
pwAtmPerfCurrentEntry entry .1.3.6.1.2.1.183.1.8.1
An entry in this table is created by the agent for every
pwAtmCfgTable entry. After 15 minutes, the contents of this
table entry are copied to a new entry in the
pwAtmPerfInterval table and the counts in this entry
are…
Indexes
PW-STD-MIBpwIndex
Column Syntax OID
pwAtmPerfCurrentMissingPkts
Number of missing packets (as detected via control word
sequence number gaps).
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.2.1.183.1.8.1.1
pwAtmPerfCurrentPktsReOrder
Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this feature.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.2.1.183.1.8.1.2
pwAtmPerfCurrentPktsMisOrder
Number of packets detected out of order (via control word
sequence numbers).
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.2.1.183.1.8.1.3
pwAtmPerfCurrentPktsTimeout
Number of packets transmitted due to timeout expiration
while attempting to collect cells.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.2.1.183.1.8.1.4
pwAtmPerfCurrentCellsXmit
Number of transmitted cells.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.2.1.183.1.8.1.5
pwAtmPerfCurrentCellsDropped
Number of dropped cells.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.2.1.183.1.8.1.6
pwAtmPerfCurrentCellsReceived
Number of received cells.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.2.1.183.1.8.1.7
pwAtmPerfCurrentUnknownCells
Number of cells received from the PSN with unknown VPI or
VCI values. This object is relevant only in N:1 mode.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.2.1.183.1.8.1.8

pwAtmPerfIntervalTable

table
.1.3.6.1.2.1.183.1.9 · 1 row entry · 11 columns
Open in standard view 
This table provides performance information per ATM PW
similar to the pwAtmPerfCurrentTable above.  However,
these counts represent historical 15 minute intervals.
Typically, this table will have a maximum of 96 entries
for a 24 hour period.
pwAtmPerfIntervalEntry entry .1.3.6.1.2.1.183.1.9.1
An entry in this table is created by the agent for
every pwAtmPerfCurrentEntry that is 15 minutes old.
The contents of the Current entry are copied to the new
entry here. The Current entry then resets its counts
to zer…
Indexes
PW-STD-MIBpwIndex pwAtmPerfIntervalNumber
Column Syntax OID
pwAtmPerfIntervalNumber
A number (normally between 1 and 96 to cover a 24 hour
period) that identifies the interval for which the set
of statistics is available. The interval identified by 1
is the most recently completed 15 minute interval, …
Unsigned32
Constraints:
range: 1-96
 .1.3.6.1.2.1.183.1.9.1.1
pwAtmPerfIntervalValidData
This variable indicates if the data for this interval
is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.2.1.183.1.9.1.2
pwAtmPerfIntervalDuration
The duration of a particular interval in seconds.
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than the
normal value. Therefore, this actual interval value
is provided.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.183.1.9.1.3
pwAtmPerfIntervalMissingPkts
Number of missing packets (as detected via control
word sequence number gaps).
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.2.1.183.1.9.1.4
pwAtmPerfIntervalPktsReOrder
Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this
feature.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.2.1.183.1.9.1.5
pwAtmPerfIntervalPktsMisOrder
Number of packets detected out of order (via control word
sequence numbers).
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.2.1.183.1.9.1.6
pwAtmPerfIntervalPktsTimeout
Number of packets transmitted due to timeout expiration.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.2.1.183.1.9.1.7
pwAtmPerfIntervalCellsXmit
Number of transmitted cells.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.2.1.183.1.9.1.8
pwAtmPerfIntervalCellsDropped
Number of dropped cells.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.2.1.183.1.9.1.9
pwAtmPerfIntervalCellsReceived
Number of received cells.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.2.1.183.1.9.1.10
pwAtmPerfIntervalUnknownCells
Number of cells received from the PSN with unknown VPI or
VCI values. This object is relevant only in N:1 mode.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.2.1.183.1.9.1.11

pwAtmPerf1DayIntervalTable

table
.1.3.6.1.2.1.183.1.10 · 1 row entry · 11 columns
Open in standard view 
This table provides performance information per ATM PW
similar to the pwAtmPerfIntervalTable above.  However,
these counters represent historical one-day intervals up to
one full month.
pwAtmPerf1DayIntervalEntry entry .1.3.6.1.2.1.183.1.10.1
An entry is created in this table by the agent
for every entry in the pwAtmCfgTable table.
Indexes
PW-STD-MIBpwIndex pwAtmPerf1DayIntervalNumber
Column Syntax OID
pwAtmPerf1DayIntervalNumber
The number of intervals, where 1 indicates current day
measured period and 2 and above indicate previous days,
respectively.
Unsigned32
Constraints:
range: 1-365
 .1.3.6.1.2.1.183.1.10.1.1
pwAtmPerf1DayIntervalValidData
This object indicates if the data for this interval
is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.2.1.183.1.10.1.2
pwAtmPerf1DayIntervalDuration
The duration of a particular interval in seconds.
Adjustments in the system's time-of-day clock may
cause the interval to be greater or less than the
normal value. Therefore, this actual interval value
is provided.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.183.1.10.1.3
pwAtmPerf1DayIntervalMissingPkts
Number of missing packets (as detected via control word
sequence number gaps).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.183.1.10.1.4
pwAtmPerf1DayIntervalPktsReOrder
Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
Note: some implementations may not support this
feature.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.183.1.10.1.5
pwAtmPerf1DayIntervalPktsMisOrder
Number of packets detected out of order (via control word
sequence numbers) and that could not be re-ordered.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.183.1.10.1.6
pwAtmPerf1DayIntervalPktsTimeout
Number of packets transmitted due to timeout expiration.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.183.1.10.1.7
pwAtmPerf1DayIntervalCellsXmit
Number of transmitted cells.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.183.1.10.1.8
pwAtmPerf1DayIntervalCellsDropped
Number of dropped cells.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.183.1.10.1.9
pwAtmPerf1DayIntervalCellsReceived
Number of received cells.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.183.1.10.1.10
pwAtmPerf1DayIntervalUnknownCells
Number of cells received from the PSN with unknown VPI
or VCI values. This object is relevant only in N:1 mode.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.183.1.10.1.11