POLICY-FRAMEWORK-PIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

policyPrcSupportTable

table

.1.3.6.1.4.1.45.4.1.1.1 · 1 row entry · 4 columns

Open in standard view

Each instance of this class specifies a PRC that the device
supports and a bit string to indicate the attributes of the
class that are supported.  These PRIs are sent to the PDP to
indicate to the PDP which PRCs, and which attributes of these
PRCs, the device supports. This table can also be downloaded 
by a network manager when static configuration is used.
          
All install and install-notify PRCs supported by the device 
must be represented in this table.

policyPrcSupportEntry entry .1.3.6.1.4.1.45.4.1.1.1.1

An instance of the policyPrcSupport class that identifies a
specific policy class and associated attributes as supported
by the device.

Indexes

policyPrcSupportPrid

Column	Syntax	OID
policyPrcSupportPrid An arbitrary integer index that uniquely identifies an instance of the policyPrcSupport class.	PolicyInstanceId Textual Convention: PolicyInstanceId `Unsigned32` Type Constraints: `range: 1..4294967295`	`.1.3.6.1.4.1.45.4.1.1.1.1.1`
policyPrcSupportSupportedPrc The object identifier of a supported PRC. There may not be more than one instance of the policyPrcSupport class with the same value of policyPrcSupportSupportedPrc.	ObjectIdentifier	`.1.3.6.1.4.1.45.4.1.1.1.1.2`
policyPrcSupportSupportedAttrs A bit string representing the supported attributes of the class that is identified by the policyPrcSupportSupportedPrc object. Each bit of this bit mask corresponds to a class attribute, with the most si…	OctetString	`.1.3.6.1.4.1.45.4.1.1.1.1.3`
policyPrcSupportMaxPris A non-negative value indicating the maximum numbers of policy rule instances that can be installed in the identified policy rule class. Note that actual number of PRIs that can be installed in a PRC at any given time ma…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.4.1.1.1.1.4`

policyPibIncarnationTable

table

.1.3.6.1.4.1.45.4.1.1.2 · 1 row entry · 6 columns

Open in standard view

This class contains a single policy rule instance that
identifies the current incarnation of the PIB and the PDP
or network manager that installed this incarnation.  The 
instance of this class is reported to the PDP at client 
connect time so that the PDP can (attempt to) ascertain the 
current state of the PIB. A network manager may use the
instance to determine the state of the device with regard
to existing NMS interactions.

policyPibIncarnationEntry entry .1.3.6.1.4.1.45.4.1.1.2.1

An instance of the policyPibIncarnation class. Only
one instance of this policy class is ever instantiated.

Indexes

policyPibIncarnationPrid

Column Syntax OID

policyPibIncarnationPrid

An index to uniquely identify an instance of this
policy class.

PolicyInstanceId

Textual Convention: PolicyInstanceId Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.45.4.1.1.2.1.1

policyPibIncarnationName

The name of the entity that installed the current
incarnation of the PIB into the device. The name may
reference a PDP when dynamic configuration is being
used or a network manager when static configuration
is being…

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.45.4.1.1.2.1.2

policyPibIncarnationId

An ID to identify the current incarnation. It has meaning
to the PDP/manager that installed the PIB and perhaps its
standby PDPs/managers. By default, it is the zero-length
string.

OctetStringr/w

.1.3.6.1.4.1.45.4.1.1.2.1.3

policyPibIncarnationLongevity

This attribute controls what the PEP does with the
downloaded policy on receipt of a Client Close message or a
loss of connection to the PDP.

If set to expireNever, the PEP continues to operate with the
i…

Enumerationr/w

Enumerated Values:

1	expireNever
2	expireImmediate
3	expireOnTimeout

.1.3.6.1.4.1.45.4.1.1.2.1.4

policyPibIncarnationTtl

The number of seconds after a Client Close or TCP timeout
for which the PEP continues to enforce the policy in the PIB.
After this interval, the PIB is considered expired and the
device no longer enforces the policy ins…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.45.4.1.1.2.1.5

policyPibIncarnationActive

If this attribute is set to TRUE, then the PIB instance
to which this PRI belongs becomes the active PIB instance.
The previous active instance becomes inactive and the
policyPibIncarnationActive attribute in that PIB i…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.4.1.1.2.1.6

policyDeviceIdentificationTable

table

.1.3.6.1.4.1.45.4.1.1.3 · 1 row entry · 3 columns

Open in standard view

This class contains a single policy rule instance that
contains device-specific information that is used to
facilitate efficient policy installation by a PDP. The
instance of this class is reported to the PDP at client
connect time so that the PDP can take into account certain
device characteristics during policy installation.

policyDeviceIdentificationEntry entry .1.3.6.1.4.1.45.4.1.1.3.1

An instance of the policyDeviceIdentification class. Only
one instance of this policy class is ever instantiated.

Indexes

policyDeviceIdentificationPrid

Column	Syntax	OID
policyDeviceIdentificationPrid An index to uniquely identify an instance of this policy class.	PolicyInstanceId Textual Convention: PolicyInstanceId `Unsigned32` Type Constraints: `range: 1..4294967295`	`.1.3.6.1.4.1.45.4.1.1.3.1.1`
policyDeviceIdentificationDescr A textual description of the PEP. This value should include the name and version identification of the PEP's hardware and software.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.45.4.1.1.3.1.2`
policyDeviceIdentificationMaxMsg The maximum message size, in octets, that the device is capable of processing. Received messages with a size in excess of this value must cause the PEP to return an error to the PDP containing the global error code 'max…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.4.1.1.3.1.3`

policyCompLimitsTable

table

.1.3.6.1.4.1.45.4.1.1.4 · 1 row entry · 4 columns

Open in standard view

Each instance of this class identifies a policy class or
attribute and a limitation related to the implementaion of
the class/attribute in the device. Additional information
providing guidance related to the limitation may also be
present. These PRIs are sent to the PDP to indicate which
PRCs or PRC attributes the device supports in a restricted
manner.

policyCompLimitsEntry entry .1.3.6.1.4.1.45.4.1.1.4.1

An instance of the policyCompLimits class that identifies
a PRC or PRC attribute and a limitation related to the PRC
or PRC attribute implementation supported by the device.
All PRIs of this class represent errors that …

Indexes

policyCompLimitsPrid

Column	Syntax	OID
policyCompLimitsPrid An arbitrary integer index that uniquely identifies an instance of the policyCompLimits class.	PolicyInstanceId Textual Convention: PolicyInstanceId `Unsigned32` Type Constraints: `range: 1..4294967295`	`.1.3.6.1.4.1.45.4.1.1.4.1.1`
policyCompLimitsComponent The object identifier of a PRC or PRC attribute that is supported in some limited fashion with regard to it's definition in the associated PIB module. The same PRC or PRC attribute identifier may appear in the table sev…	ObjectIdentifier	`.1.3.6.1.4.1.45.4.1.1.4.1.2`
policyCompLimitsType A value describing an implementation limitation for the device related to the PRC or PRC attribute identified by the policyCompLimitsComponent data in this class instance. Values for this object are derived from the def…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.45.4.1.1.4.1.3`
policyCompLimitsGuidance A value used to convey additional information related to the implementation limitation noted by the policyCompLimitsType attribute. The value of this attribute must interpreted in the context of the policyCompLimitsType…	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.45.4.1.1.4.1.4`