PKTC-ECL-EN-SIG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
13
.1.3.6.1.4.1.24624.2.2.6.2.1.2.1 · 1 row entry · 4 columns
This table augments pktcNcsEndPntConfigTable.
pktcEnNcsEndPntConfigEntry entry .1.3.6.1.4.1.24624.2.2.6.2.1.2.1.1
An enhancement to pktcNcEndPntConfigTable - where each
entry describes endpoint characteristics.
Indexes
No indexes recorded
Column Syntax OID
pktcEnNcsEndPntQuarantineState
This object reflects the state of the Endpoint.
When the endpoint is in notification, lockstep or
values 'extended lockstep' states, the E-MTA MUST report
the of notification(2), lockstep(3) or extendedlockstep(
4),re…
Enumeration
Enumerated Values:
1normal
2notification
3lockstep
4extendedlockstep
.1.3.6.1.4.1.24624.2.2.6.2.1.2.1.1.1
pktcEnNcsEndPntHookState
This object reflects the 'hook state' and 'NCS Activity'
of an endpoint.
'NCS Activity', by definition includes: an active
timeout signal, active brief signal or existence of
an NCS connection.
The onHook(1) state…
Enumeration
Enumerated Values:
1onHook
2onHookPlusNCSActivity
3offHook
.1.3.6.1.4.1.24624.2.2.6.2.1.2.1.1.2
pktcEnNcsEndPntFaxDetection
This MIB object is used to configure
the distinctive fax calling tone (CNG) detection feature
on an MTA endpoint with reference to the analog interface[po1].
When set to true, the MTA MUST enable the detection
of CNG to…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.24624.2.2.6.2.1.2.1.1.3
pktcEnNcsEndPntStatusReportCtrl deprecated
This MIB object is being used to control
the Endpoint Status Reporting, if the feature is
supported by the MTA and is configurable.
The term 'Endpoint Status Reporting' refers to any
information that the MTA may provi…
Enumerationr/w
Enumerated Values:
1unsupported
2reportActualStatus
3reportEndPointAsActive
.1.3.6.1.4.1.24624.2.2.6.2.1.2.1.1.4
.1.3.6.1.4.1.24624.2.2.6.2.1.2.2 · 1 row entry · 6 columns
This table includes any additional information
associated with PacketCable EndPoints. 
The number of entries in this table represents the 
number of available PacketCable EndPoints.
pktcEnEndPntInfoEntry entry .1.3.6.1.4.1.24624.2.2.6.2.1.2.2.1
An entry in this table MUST be created for each
PacketCable EndPoint.
The index needs to be the corresponding index in the ifTable
for the associated PacketCable EndPoint.
Indexes
IF-MIBifIndex
Column Syntax OID
pktcEnEndPntFgnPotSupport
This MIB object indicates the capabilities of the MTA to
detect various conditions related to the presence of
foreign potential on an endpoint.
The MTA MUST set a value of '1' for each bit corresponding
to a supporte…
Bits
Enumerated Values:
0fgnPotDetection
1hazardousFgnPotDetection
.1.3.6.1.4.1.24624.2.2.6.2.1.2.2.1.1
pktcEnEndPntFgnPotDescr
This MIB object provides information related to the
various tests for each detection mechanism supported by
the MTA. While the actual contents are vendor-specific,
the recommended format is:
[<Capability>:<Test Refer…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.24624.2.2.6.2.1.2.2.1.2
pktcEnEndPntClrFgnPotTsts
This MIB object is used to clear the current test
results of supported conditions indicated by
'pktcEnEndPntFgnPotSupport'.
Setting a bit to a value of '1' clears the corresponding
results in the MIB Object 'pktcEnEn…
Bitsr/w
Enumerated Values:
0clrFgnPotentialResults
1clrHazardousPotResults
.1.3.6.1.4.1.24624.2.2.6.2.1.2.2.1.3
pktcEnEndPntRunFgnPotTsts
This MIB object is used to initiate one or more test cases
associated with a supported foreign potential detection.
Thus, whenever one or more BITS corresponding to supported
foreign scenario potential detection mechani…
Bitsr/w
Enumerated Values:
0runFgnPotentialTsts
1runHazardousPotTsts
.1.3.6.1.4.1.24624.2.2.6.2.1.2.2.1.4
pktcEnEndPntFgnTestValidity
This MIB object is used to indicate the validity of the
corresponding test cases that were initiated using the MIB
Object 'pktcEnEndPntRunFgnPotTests'.
An MTA MUST:
- return a value of '1' if the tests were run success…
Bits
Enumerated Values:
0fgnPotTstValidity
1hazardousPotTstValidity
.1.3.6.1.4.1.24624.2.2.6.2.1.2.2.1.5
pktcEnEndPntFgnTestResults
This MIB object is used to indicate the results of the
corresponding test cases that were initiated using the MIB
Object 'pktcEnEndPntRunFgnPotTests'.
An MTA MUST:
- set the corresponding bit to a value of '1' if the …
Bits
Enumerated Values:
0fgnPotentialResults
1hazardousPotResults
.1.3.6.1.4.1.24624.2.2.6.2.1.2.2.1.6
.1.3.6.1.4.1.24624.2.2.6.2.1.2.3 · 1 row entry · 3 columns
This MIB table contains the MIB Objects used for
managing loop voltage on an MTA. An MTA MUST 
implement the defined MIB Objects and the associated
functionality.
pktcEnNcsEndPntLVMgmtEntry entry .1.3.6.1.4.1.24624.2.2.6.2.1.2.3.1
Each entry in this MIB table consists of the
loop voltage management policy for the specified
index. The MTA MUST use the ifIndex with a value of '1'
to represent the E-MTA and the remaining indices
(if used) to represe…
Indexes
IF-MIBifIndex
Column Syntax OID
pktcEnNcsEndPntLVMgmtPolicy
This MIB Object allows the Service Provider to choose
a suitable policy for Loop Voltage behavior on MTAs.

Unless overridden by the operator, the MTA MUST use the
default value specified in the definition…
Enumerationr/w
Enumerated Values:
1voltageAtAllTimes
2voltageUnlessRFQAMabsent
3voltageBasedOnServiceOrTimers
4voltageBasedOnService
.1.3.6.1.4.1.24624.2.2.6.2.1.2.3.1.1
pktcEnNcsEndPntLVMgmtResetTimer
This MIB Object specifies the time duration allowed for
an MTA to successfully provision and is only applicable when
the MIB Object pktcEnNcsEndPntLVMgmtPolicy is
set to a value of 'voltageBasedOnServiceOrTimers(3)'.…
minutesUnsigned32r/w
Constraints:
range: 0-1440
.1.3.6.1.4.1.24624.2.2.6.2.1.2.3.1.2
pktcEnNcsEndPntLVMgmtMaintTimer
This MIB Object allows the operator to specify the time that
loop voltage condition will be maintained, irrespective of
the changes to the MTA. It is only applicable when the MIB
Object pktcEnNcsEndPntLVMgmtPolicy is …
minutesUnsigned32r/w
Constraints:
range: 0-1440
.1.3.6.1.4.1.24624.2.2.6.2.1.2.3.1.3