PDN-XDSL-INTERFACE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
34

xdslDevGenericIfConfigTable

table mandatory
.1.3.6.1.4.1.1795.2.24.9.2.1.1 · 1 row entry · 8 columns
Open in standard view 
The xdslDevGenericIfConfigTable provides config information 
          
generic to a xDSL device, or system. The table is indexed by an 
          
object which corresponds to ifIndex. These ifIndex entries, 
          
themselves, denote and identify specific xdsl interfaces on
          
the board or module. Also the configuration parameters are
          
grouped into two broad categories, 'up' and 'down'. 'up'
          
reflects the upstream direction (from the customer premises
          
to the central office). 'Down' reflects the downstream
          
direction (from the central office to the customer premises)
xdslDevGenericIfConfigEntry entry .1.3.6.1.4.1.1795.2.24.9.2.1.1.1
Describes a specific xDSL interface entry.
Indexes
Column Syntax OID
xdslDevGenericIfConfigPortSpeedBehaviour mandatory
The value of this object corresponds to the

behaviour of the specified port. The default

value for this object is fixed (1).
Enumerationr/w
Enumerated Values:
1fixed
2adaptive
 .1.3.6.1.4.1.1795.2.24.9.2.1.1.1.1
xdslDevGenericIfConfigMarginThreshold mandatory
The value of this object corresponds to the offset from

the startup margin. The threshold margin is calculated

by subtracting the offset from the startup margin.

Permissible…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.1.1.1.2
xdslDevGenericIfConfigPortID mandatory
The value of this object corresponds to 40 character

information only field that identifies what the DSL

port is connected to (Circuit ID, MDF location,

Customer name, etc.)
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.1795.2.24.9.2.1.1.1.3
xdslDevGenericIfConfigLinkUpDownTransitionThreshold mandatory
The value of this object corresponds to the threshold

value for link up-down transitions. If link up-down's exceed

this threshold value a xdslLinkupDownTransitions

trap is ge…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.1.1.1.4
xdslDevGenericIfConfigLineEncodeType mandatory
The value of this object corresponds to the line

encoding technology used for data transmission over

the the dsl link.
Enumeration
Enumerated Values:
1other
2cap
3twoB1q
4mvl
5g-lite
6dmt
 .1.3.6.1.4.1.1795.2.24.9.2.1.1.1.5
xdslDevGenericIfConfigLineRateMode mandatory
The value of this object is used to choose the line

rate list for data transmission over the dsl link.

The default value is standard(1).
Enumerationr/w
Enumerated Values:
1standard
2nx128
 .1.3.6.1.4.1.1795.2.24.9.2.1.1.1.6
xdslDevGenericIfConfigLinkEncapType mandatory
The value of this object corresponds to the link

encapsulation type. Following are valid settings:

linkNone (1)

ethernet (2)

ppp (3)

…
Enumerationr/w
Enumerated Values:
1linkNone
2ethernet
3ppp
4slip
5frameRelay-PLL
6x23PVC
7x25SVC
8hdlc
9etherHDLC
10rfc1483-MPOA
11funi-MPOA
12frf5
13frf8
14pppoAVC-Mux
15pppoALLC
 .1.3.6.1.4.1.1795.2.24.9.2.1.1.1.7
xdslDevGenericIfConfigSnType mandatory
The value of this object is used to choose a valid

Service Node Type to be configured in the port. The

configurable values are the object identifiers of the

remote endpoints…
ObjectIdentifierr/w .1.3.6.1.4.1.1795.2.24.9.2.1.1.1.8

xdslDevRADSLSpecificIfConfigTable

table mandatory
.1.3.6.1.4.1.1795.2.24.9.2.2.1 · 1 row entry · 10 columns
Open in standard view 
The xdslDevRADSLSpecificIfConfigTable provides config information
          
specific to a xDSL device, or system. The table is indexed by
          
an object which corresponds to ifIndex. These ifIndex entries, 
          
themselves, denote and identify specific xdsl interfaces on
          
the board or module. Also the configuration parameters are
          
grouped into two broad categories, 'up' and 'down'. 'up'
          
reflects the upstream direction (from the customer premises
          
to the central office). 'Down' reflects the downstream
          
direction (from the central office to the customer premises)
xdslDevRADSLSpecificIfConfigEntry entry .1.3.6.1.4.1.1795.2.24.9.2.2.1.1
Describes a specific xDSL interface entry.
Indexes
Column Syntax OID
xdslDevRADSLSpecificIfConfigUpFixedPortSpeed mandatory
The value of this object corresponds to the upstream

speed of the specified port for fixed port speed

behaviour. All the speeds are in kbps.

If the port speed behaviour is ad…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.2.1.1.1
xdslDevRADSLSpecificIfConfigDownFixedPortSpeed mandatory
The value of this object corresponds to the downstream

speed of the specified port for fixed port speed

behaviour. All the speeds are in kbps.

If the port speed behaviour is…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.2.1.1.2
xdslDevRADSLSpecificIfConfigUpAdaptiveUpperBoundPortSpeed mandatory
The value of this object corresponds to the

upper bound for the upstream port speed of the specified port

for adaptive port speed behaviour. The speeds are measured

in kbps.…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.2.1.1.3
xdslDevRADSLSpecificIfConfigUpAdaptiveLowerBoundPortSpeed mandatory
The value of this object corresponds to the

lower bound for the upstream port speed of the

specified port for adaptive port speed behaviour

in kbps. If the port speed behavi…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.2.1.1.4
xdslDevRADSLSpecificIfConfigDownAdaptiveUpperBoundPortSpeed mandatory
The value of this object corresponds to

the upper bound allowed for the downstream port speed

of the specified port for adaptive port speed

behaviour. The speeds are measu…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.2.1.1.5
xdslDevRADSLSpecificIfConfigDownAdaptiveLowerBoundPortSpeed mandatory
The value of this object corresponds to the

Minimum lower bound allowed for the downstream port speed

of the specified port for adaptive port speed behaviour.

If the port sp…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.2.1.1.6
xdslDevRADSLSpecificIfConfigReedSolomonDownFwdErrCorrection mandatory
The value of this object corresponds to the

Reed-Solomon forward error correction in the downstream

direction. The default value of this object should be

minimizeError (1).
Enumerationr/w
Enumerated Values:
1minimizeError
2minimizeDelay
3reedSolomonNotSupported
 .1.3.6.1.4.1.1795.2.24.9.2.2.1.1.7
xdslDevRADSLSpecificIfConfigStartUpMargin mandatory
The value of this object corresponds to the startup value

of the margin for a DSL interface (specified by ifIndex).

The unit is db (decibels. The higher the margin the better
…
Integer32r/w
Constraints:
range: -3-9
 .1.3.6.1.4.1.1795.2.24.9.2.2.1.1.8
xdslDevRADSLSpecificIfConfigTxPowerAttenuation mandatory
This value corresponds to the Transmitt Power Attenuation in

dB for the access node. This value represents the downstream

power level in dB. Permissible values are -6, -3 and 0.
…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.2.1.1.9
xdslDevRADSLSpecificIfConfigSnTxPowerAttenuation mandatory
This value corresponds to the Transmitt Power Attenuation in dB

for the service node. This value represents the upstream power

level in dB. Permissible values are -9, -6, -3 and 0. The
…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.2.1.1.10

xdslDevMVLSpecificIfConfigTable

table mandatory
.1.3.6.1.4.1.1795.2.24.9.2.3.1 · 1 row entry · 7 columns
Open in standard view 
The xdslDevMVLSpecificIfConfigTable provides config information specific 
          
to a xDSL(MVL) device, or system. The table is indexed by an 
          
object which corresponds to ifIndex. These ifIndex entries, 
          
themselves, denote and identify specific xdsl(Mvl) interfaces on
          
the board or module.
xdslDevMVLSpecificIfConfigEntry entry .1.3.6.1.4.1.1795.2.24.9.2.3.1.1
Describes a specific xDSL(MVL) interface entry.
Indexes
Column Syntax OID
xdslDevMVLSpecificIfConfigMaxPortSpeed obsolete
The value of this object corresponds to the upper bound

port speed of the specified port. The speeds are measured

in kbps.

Prior to GrandSlam 2.3, this object was used for …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.3.1.1.1
xdslDevMVLSpecificIfConfigOnHookTxPowerAttenuation mandatory
This value corresponds to the On-hook Transmitt Power Attenuation

in dB for the access node and the service node. This value represents

both downstream and upstream power level in dB while…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.3.1.1.2
xdslDevMVLSpecificIfConfigOffHookTxPowerAttenuation mandatory
This value corresponds to the Off-hook Transmitt Power Attenuation

in dB for the access node and the service node. This value represents

both downstream and upstream power level in dB whil…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.3.1.1.3
xdslDevMVLSpecificIfConfigOnHookPCVoltageDropThresholdValue mandatory
This value correspond to the portcard Voltage Drop

Threshold Value and valid settings are 0 and 6.

If the corresponding value at the endpoint is

set for Max (255) than only v…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.3.1.1.4
xdslDevMVLSpecificIfConfigOnHookSNVoltageDropThresholdValue mandatory
This corresponds to the endpoint Voltage Drop

Threshold Value and valid settings are 17, 34 and 255(Max).

If Reach is used than only valid value is 34 - default.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.3.1.1.5
xdslDevMVLSpecificIfConfigMaxDownStreamPortSpeed mandatory
The value of this object corresponds to the upper bound downstream

port speed of the specified port. The speeds are measured

in kbps.

Setting the value of this object will a…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.3.1.1.6
xdslDevMVLSpecificIfConfigMaxUpStreamPortSpeed mandatory
The value of this object corresponds to the upper bound upstream

port speed of the specified port. The speeds are measured

in kbps.

Prior to GrandSlam 2.3, the object MaxPor…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.3.1.1.7

xdslDevSDSLSpecificIfConfigTable

table mandatory
.1.3.6.1.4.1.1795.2.24.9.2.4.1 · 1 row entry · 6 columns
Open in standard view 
The xdslDevSDSLSpecificIfConfigTable provides configuration 
          
specific to the SDSL link.
xdslDevSDSLSpecificIfConfigEntry entry .1.3.6.1.4.1.1795.2.24.9.2.4.1.1
Describes a specific SDSL configuration entry.
Indexes
Column Syntax OID
xdslDevSDSLSpecificIfConfigFixedPortSpeed mandatory
The value of this object corresponds to both upstream

and downstream speed of the specified port. All the

speeds are in kbps. The value of this object is used

only when the …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.4.1.1.1
xdslDevSDSLSpecificIfConfigMaxPortSpeed mandatory
The value of this object corresponds to the upper bound

port speed of the specified port when the port behaviour

is adaptive. The speeds are measured in kbps.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.4.1.1.2
xdslDevSDSLSpecificIfConfigFixedPortSpeedNx128Mode mandatory
The value of this object applies to both upstream

and downstream speed of the specified port when the

line rate mode is configured as Nx128 mode. All the

speeds are in kbps…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.4.1.1.3
xdslDevSDSLSpecificIfConfigMaxPortSpeedNx128Mode mandatory
The value of this object corresponds to the upper bound

port speed of the specified port when the port behaviour

is adaptive and the line rate is Nx128 mode, and doesn't

take…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.4.1.1.4
xdslDevSDSLSpecificIfConfigMinSnrMargin mandatory
Configured Minimum acceptable Signal/Noise Margin.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.1795.2.24.9.2.4.1.1.5
xdslDevSDSLSpecificIfConfigTargetSnrMargin mandatory
Configured Target Signal/Noise Margin.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.1795.2.24.9.2.4.1.1.6

xdslDevIDSLSpecificIfConfigTable

table mandatory
.1.3.6.1.4.1.1795.2.24.9.2.5.1 · 1 row entry · 3 columns
Open in standard view 
The xdslDevIDSLSpecificIfConfigTable provides configuration 
          
specific to the IDSL link.
xdslDevIDSLSpecificIfConfigEntry entry .1.3.6.1.4.1.1795.2.24.9.2.5.1.1
Describes a specific IDSL configuration entry.
Indexes
Column Syntax OID
xdslDevIDSLSpecificIfConfigPortSpeed mandatory
The value of this object corresponds to both upstream

and downstream speed of the specified port. All the

speeds are in kbps. Allowed speeds are 64, 128 and 144

kbps. The def…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.9.2.5.1.1.1
xdslDevIDSLSpecificIfConfigTimingPortTransceiverMode mandatory
The transceiver mode selected on the timing source port.

Only one IDSL port can be set to NT mode. This timing

will then be distributed to all other IDSL ports in the

chassis…
Enumerationr/w
Enumerated Values:
1networkTiming
2localTiming
 .1.3.6.1.4.1.1795.2.24.9.2.5.1.1.2
xdslDevIDSLSpecificChannel mandatory
The channel type for 64 Kbps. Default value is B1.
Enumerationr/w
Enumerated Values:
1b1
2b2
3noOp
 .1.3.6.1.4.1.1795.2.24.9.2.5.1.1.3