PDN-REACHDSL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
15

reachDSLSpectrumMgmtConfTable

table
.1.3.6.1.4.1.1795.2.24.2.6.20.1.3 · 1 row entry · 5 columns
Open in standard view 
The ReachDSL Spectrum Management Configuration Table
This table is used for configuring spectrum management
objects.
reachDSLSpectrumMgmtConfEntry entry .1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1
An entry in the ReachDSL Spectrum Management
Configuration table.

Note: This entry can be accessed only for ifIndex
values that belong to a physical interface.
e.g. for ifType = 'adsl'.
Indexes
IF-MIBifIndex
Column Syntax OID
reachDSLSpectrumMgmtConfEWL
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.

The Equivalent Working Length (EWL). The value selected
corresponds to the estimated len…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.1
reachDSLSpectrumMgmtConfLoopLength
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.


This entry specifies the loop length for the line. The
configurable values…
Enumerationr/w
Enumerated Values:
1short
2medium
3long
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.2
reachDSLSpectrumMgmtConfAtucMaxTxPower
The maximum transmit power at the ATUC (in tenth dB).
This value will be based on the spectrum management
selection. It ranges from -140 to 120 in increments
of 10.
tenth dBInteger32r/w
Constraints:
range: -140-120
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.3
reachDSLSpectrumMgmtConfAturMaxTxPower
The maximum transmit power at the ATUR (in tenth dB).
This value will be based on the spectrum management
selection. It ranges from -140 to 120 in increments
of 10.
tenth dBInteger32r/w
Constraints:
range: -140-120
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.4
reachDSLSpectrumMgmtConfQuadMode
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.

This entry specifies the quad cable configuration &
length for the line. The configur…
Enumerationr/w
Enumerated Values:
1sameQuad
2segregatedQuadUpto3km
3segregatedQuadAbove3km
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.3.1.5

reachDSLSpectrumMgmtLineInfoTable

table
.1.3.6.1.4.1.1795.2.24.2.6.20.1.4 · 1 row entry · 8 columns
Open in standard view 
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
	instead.
          
The ReachDSL Spectrum Management Line Info Table.
This table gives information about the spectrum 
management ranges that are applicable for each port,
based on the spectral requirements for the device.
reachDSLSpectrumMgmtLineInfoEntry entry .1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.


An entry in the reachDSLSpectrumMgmtLineInfoTable table.

Note: Th…
Indexes
IF-MIBifIndex
Column Syntax OID
reachDSLSpectrumMgmtAtucMaxTxRate
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.


This rate will be the max allowed Tx Rate(in bps) for
the port based on t…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.1
reachDSLSpectrumMgmtAtucMinTxRate
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.


This rate will be the min allowed Tx Rate based on the
spectrum management…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.2
reachDSLSpectrumMgmtAtucMaxTxPower
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.


The maximum transmit power at the ATUC (in tenth dB).
This value will be…
tenth dBInteger32
Constraints:
range: -140-120
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.3
reachDSLSpectrumMgmtAturMaxTxRate
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.


This rate will be the max allowed Tx Rate(in bps) for
the port based on t…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.4
reachDSLSpectrumMgmtAturMinTxRate
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.


This rate will be the min allowed Tx Rate based on the
spectrum management…
bpsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.5
reachDSLSpectrumMgmtAturMaxTxPower
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.


The maximum transmit power at the ATUR (in tenth dB). This
value will be …
tenth dBInteger32
Constraints:
range: -140-120
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.6
reachDSLSpectrumMgmtMinEWL
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.


The minimum value (in feet, if 'EWLUnits' is 'feet, or in
meters, if 'EWL…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.7
reachDSLSpectrumMgmtMaxEWL
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.


The maximum value (in feet, if 'EWLUnits' is 'feet, or in
meters, if 'EWL…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.4.1.8

reachDSLLineTable

table
.1.3.6.1.4.1.1795.2.24.2.6.20.1.5 · 1 row entry · 2 columns
Open in standard view 
The ReachDSL Line Table.
reachDSLLineEntry entry .1.3.6.1.4.1.1795.2.24.2.6.20.1.5.1
An entry in the reachDSLLineTable.

Note: This entry can be accessed only for ifIndex values
that belong to a physical interface.
e.g. for ifType = 'adsl'.
Indexes
IF-MIBifIndex
Column Syntax OID
reachDSLPotsDetectionVoltage
This object defines the configurable voltage used to
detect the presence of POTS on the DSL line. The range
is 0-74 volts. The default value is 3 volts.

Note: This object can be accessed only for ifIndex…
voltsInteger32r/w
Constraints:
range: 0-74
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.5.1.1
reachDSLCircuitIdentifier deprecated
The value of this object reflects the transmission
vendor's circuit identifier to facilitate troubleshooting.

Note: This object can be accessed only for ifIndex
values that belong to a physical in…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.1795.2.24.2.6.20.1.5.1.2