PDN-MPE-DSLAM-SYSTEM-MIB
The mpe dslam MIB. This MIB is written specifically to
extend entPhysicalTable.
mpe-dslam
1.3.6.1.4.1.1795.2.24.12.24
Imported Objects
| ENTITY-MIB | entPhysicalEntry entPhysicalIndex |
| PDN-HEADER-MIB | pdn-mpe |
| PDN-MPE-MIB2-MIB | mpeSysObjectID |
| PDN-TC | ContactState |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
Type Definitions (2)
| MpeEntExtAdminStatus | Enumeration |
up(1)down(2)testing(3) |
| MpeEntExtOperStatus | Enumeration |
up(1)down(2)testing(3)unknown(4)dormant(5)notPresent(6)reserved1(7) |
Objects (25)
mpe-dslam
|
.1.3.6.1.4.1.1795.2.24.12.24 |
|
|
mpeSysDevDslamMIBObjects
|
.1.3.6.1.4.1.1795.2.24.12.24.1 |
|
|
mpeEntExtAlarms
|
.1.3.6.1.4.1.1795.2.24.12.24.1.1 |
|
mpeEntExtAlarmTable
|
.1.3.6.1.4.1.1795.2.24.12.24.1.1.1 |
|
mpeEntExtAlarmEntry
|
.1.3.6.1.4.1.1795.2.24.12.24.1.1.1.1 |
|
mpeEntExtAlarm
|
SNMPv2-TCTruthValue | .1.3.6.1.4.1.1795.2.24.12.24.1.1.1.1.1 |
|
mpeAlarmRelay
|
.1.3.6.1.4.1.1795.2.24.12.24.1.2 |
|
mpeAlarmRelayEquipIndex
deprecated
|
Integer32 | .1.3.6.1.4.1.1795.2.24.12.24.1.2.1 |
|
mpeAlarmRelayInputContactState
deprecated
|
PDN-TCContactState | .1.3.6.1.4.1.1795.2.24.12.24.1.2.2 |
|
mpeAlarmRelayTable
|
.1.3.6.1.4.1.1795.2.24.12.24.1.2.3 |
|
|
mpeAlarmRelayEntry
|
ENTITY-MIBentPhysicalIndex | .1.3.6.1.4.1.1795.2.24.12.24.1.2.3.1 |
|
mpeAlarmRelayState
r/w
|
PDN-TCContactState | .1.3.6.1.4.1.1795.2.24.12.24.1.2.3.1.1 |
|
mpeEntExtMibObjects
|
.1.3.6.1.4.1.1795.2.24.12.24.1.3 |
|
|
mpeEntPhysicalExtTable
|
.1.3.6.1.4.1.1795.2.24.12.24.1.3.1 |
|
|
mpeEntPhysicalExtEntry
|
.1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1 |
|
|
mpeEntPhysicalExtUpTime
|
SNMPv2-SMITimeTicks | .1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.1 |
|
mpeEntPhysicalExtLocation
r/w
|
SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.2 |
|
mpeEntPhysicalExtAdminStatus
r/w
|
MpeEntExtAdminStatus | .1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.3 |
|
mpeEntPhysicalExtOperStatus
|
MpeEntExtOperStatus | .1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.4 |
|
mpeSysDevDslamMIBTraps
|
.1.3.6.1.4.1.1795.2.24.12.24.2 |
|
|
mpeSysDevDslamMIBNotifications
|
.1.3.6.1.4.1.1795.2.24.12.24.2.0 |
|
|
mpeSysDevDslamConformance
|
.1.3.6.1.4.1.1795.2.24.12.24.3 |
|
|
mpeSysDevDslamGroups
|
.1.3.6.1.4.1.1795.2.24.12.24.3.1 |
|
|
mpeSysDevDslamCompliances
|
.1.3.6.1.4.1.1795.2.24.12.24.3.2 |
|
|
mpeSysDevDslamDeprecatedGroup
|
.1.3.6.1.4.1.1795.2.24.12.24.3.3 |
Notifications / Traps (16)
| Name | OID | Description |
|---|---|---|
mpeAlarmRelayInputStateChanged
|
.1.3.6.1.4.1.1795.2.24.12.24.2.0.26 |
This trap signifies that the state of the Alarm Relay Input has changed. |
|
mpeFanEntityModuleFailure
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.0.27 |
This trap indicates the failure of the fan module on the device. |
|
mpeFanEntityModuleOperational
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.0.28 |
This trap indicates the indicates the fan module on the device is back to operational. |
|
mpePowerSourceAFailure
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.0.29 |
This trap indicates that power source A has failed. |
|
mpePowerSourceBFailure
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.0.30 |
This trap indicates that power source B has failed. |
|
mpePowerSourceAOperational
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.0.31 |
This trap indicates that the power source A is operational. This trap compliments powerSourceAFailure trap. |
|
mpePowerSourceBOperational
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.0.32 |
This trap indicates that the power source B is operational. This trap compliments powerSourceBFailure trap. |
|
mpeDeviceFailure
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.15 |
This trap signifies that the sending protocol's device has failed and the failure was not a result of a device test. Note there are no variable bindings for this trap |
|
mpeDeviceFailureCleared
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.16 |
This trap signifies that the sending protocol's device has failed but now it is operational. Failure was not a result of a device test. |
|
mpeNonSupportedMCC
PDN-MPE-MIB2-MIBmpeSysObjectID
|
.1.3.6.1.4.1.1795.2.24.12.24.2.20 |
AN has detected MCC firmware release too low to support this device |
|
mpeNonSupportedChassis
PDN-MPE-MIB2-MIBmpeSysObjectID
|
.1.3.6.1.4.1.1795.2.24.12.24.2.21 |
AN in slot xx has been installed in a chassis that cannot support one or more of its features. |
|
mpeAlarmRelayInputContactStateChanged
|
.1.3.6.1.4.1.1795.2.24.12.24.2.22 |
This trap signifies that the state of the InputContact Alarm
has changed since last time.
NOTE: This object has been deprecated. Please consider using
the mpeAlarmRelayInputStateChanged notification.
|
|
mpeEntPhysicalExtEntityCreated
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.23 |
This trap signifies that an instance of this entity has
been created in the entPhysicalTable.
This trap is generated in addition to the entConfigChange
notification defined in RFC2737.
|
|
mpeEntPhysicalExtEntityDeleted
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.24 |
This trap signifies that an instance of this entity has
been deleted from the entPhysicalTable.
This trap is generated in addition to the entConfigChange
notification defined in RFC2737.
|
|
mpeEntPhysicalExtEntityChanged
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.25 |
This trap signifies that an instance of this entity has
been modified in the entPhysicalTable as a result of a
change in any of the objects in that table.
This trap is generated in addition to the entConfigChange
notification defined in RFC2737.
|
|
mpeCcn
ENTITY-MIBentPhysicalIndex
|
.1.3.6.1.4.1.1795.2.24.12.24.2.7 |
This trap signifies a Configuration change or software upgrade in the xDSL card. This trap is of 'warning' class |