PDN-MPE-DEVICE-CONTROL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
27

mpeDevControlTable

table
.1.3.6.1.4.1.1795.2.24.12.10.1.1.1 · 1 row entry · 1 columns
Open in standard view 
A table that contains generic information about
Card Control.
mpeDevControlEntry entry .1.3.6.1.4.1.1795.2.24.12.10.1.1.1.1
A list of information for device Control.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
mpeDevControlReset
Writing the value reset (2) to this object
initiates a Hardware power-on reset of the device.
Writing the value resetToFactoryDefaults (3) causes the device to re-configure
itself with factory defaults. Writing the v…
PDN-TCResetStatesr/w
Textual Convention: PDN-TCResetStates Enumeration
Type Values:
1noOp
2reset
3resetToFactoryDefaults
4resetToNewActiveConfig
 .1.3.6.1.4.1.1795.2.24.12.10.1.1.1.1.1

mpeDevControlSelfTestTable

table
.1.3.6.1.4.1.1795.2.24.12.10.1.1.2 · 1 row entry · 1 columns
Open in standard view 
A table containing information to control device specific Self-Test
operations.
mpeDevControlSelfTestEntry entry .1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1
A list of objects for performing Self-Test operations.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
mpeDevControlExtendedSelfTest
This object is used to start the extended Power-On Self-Test
test. Writing the value enableExtendSelfTestAndReset(2) to this
object resets the device and puts it into extended Power-On
Self-Test mode. During device i…
Enumerationr/w
Enumerated Values:
1noOp
2enableExtendSelfTestAndReset
 .1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1.1

mpeDevFileXferConfigTable

table
.1.3.6.1.4.1.1795.2.24.12.10.1.2.1 · 1 row entry · 18 columns
Open in standard view 
The Paradyne  FileXfer Client Config Table.
mpeDevFileXferConfigEntry entry .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1
Use of the File Tranfer MIB could be used with other MIBS in
the following manner:
a) Use another MIB/means to verify available space /make room
for a file to be transfered to this device
b) Use this MIB …
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
mpeDevFileXferFileName
This object contains the name of the filetransfer file.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.1
mpeDevFileXferCopyProtocol
The transfer protocol that should be used to copy the file
across the network. If the file transfer is to occur locally on the
SNMP agent, the method of transfer is left upto the implementation,
and is not restricted …
Enumerationr/w
Enumerated Values:
1tftp
2ftp
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.2
mpeDevFileXferFileType
Specifies the type of file your want to transfer.
Enumerationr/w
Enumerated Values:
1firmware
2config
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.3
mpeDevFileXferServerIpAddress
This object contains the file transfer server's IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.4
mpeDevFileXferUserName
This object contains the username if a username is needed
to login to the server.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.5
mpeDevFileXferUserPassword
This object contains the password if a password is needed
to login to the server. This object will return null on a read
operation.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.6
mpeDevFileXferOperation
This object contains the operation the file transfer wants to
perform.
Enumerationr/w
Enumerated Values:
1get
2put
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.7
mpeDevFileXferPktsSent
This object contains the the number of packets sent to the
server at the time of interrogation.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.8
mpeDevFileXferPktsRecv
This object contains the the number of packets received from the
server at the time of interrogation.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.9
mpeDevFileXferOctetsSent
This object contains the the number of octets sent to the
server at the time of interrogation.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.10
mpeDevFileXferOctetsRecv
This object contains the the number of octets received from the
server at the time of interrogation.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.11
mpeDevFileXferOwnerString
The entity which currently has the 'ownership'
required to invoke the operation on this index.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.12
mpeDevFileXferStatus
This object contains the status of the file transfer.
Enumeration
Enumerated Values:
1none
2success
3failure
4inprogress
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.13
mpeDevFileXferErrorStatus
This object contains the reason code of the failure determined in
mpeDevFileXferStatus.
The reason code are specific to the file transfer protocol.

Please refer to the file transfer protocols respective …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.14
mpeDevFileXferSendEvent
This object indicates whether or not to send the
mpeDevFileXferEvent event trap .
Enumerationr/w
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.15
mpeDevFileXferRowStatus
This object is used to create
a new row or delete an
existing row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.16
mpeDevFileXferXferTime
This object indicates the elapsed time
(in hundredths of a second) of the file transfer.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.17
mpeDevFileXferFileFormat
This object contains the file representation type. A
file representation type of ascii implies an ASCII,
non-print text file. A file representation type of
binary implies an binary image file. The default file
represen…
Enumerationr/w
Enumerated Values:
1ascii
2binary
 .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.18

mpeDevFirmwareControlTable

table
.1.3.6.1.4.1.1795.2.24.12.10.1.3.1 · 1 row entry · 4 columns
Open in standard view 
A list of the current Firmware Releases and their associated
status.  Each Firmware Release will be indexed by a number
from 1 to N.  The user will be able to view the Firmware
Release String and Operational Status of the release (valid
        or invalid) and activate a valid Firmware Release by changing
        the Administration Status to active.
mpeDevFirmwareControlEntry entry .1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1
The Device Firmware Release entry.
Indexes
ENTITY-MIBentPhysicalIndex mpeDevFirmwareControlIndex
Column Syntax OID
mpeDevFirmwareControlIndex
This object is used to index the Firmware table (range 1 to N).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.1
mpeDevFirmwareControlRelease
This object indicates the Software Release for
this Firmware. If the Software Firmware is Operational Status
is invalid, the Software Revision Number will be blank.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.2
mpeDevFirmwareControlOperStatus
This object indicates whether or not the indexed
Firmware entry contains a valid(1) or invalid(2) Firmware.
Enumeration
Enumerated Values:
1valid
2invalid
3unknown
 .1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.3
mpeDevFirmwareControlAdminStatus
This object indicates whether or not the indexed
Firmware entry is active(1) or inactive(2).
Writing active(1) will activate that software release
and cause the unit to reset (response may timeout).
Writing active(1) to…
Enumerationr/w
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.4

mpeDevControlTestTable

table
.1.3.6.1.4.1.1795.2.24.12.10.1.4.3 · 1 row entry · 3 columns
Open in standard view 
A table that contains configuration information to perform
device specific tests.
mpeDevControlTestEntry entry .1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1
A list of configuration information for device specific tests.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
mpeDevControlTestType
This object is used to specify the type of the test to start.
Enumerationr/w
Enumerated Values:
1lampTest
 .1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1.1
mpeDevControlTestStatus
The test status on the device. This object indicates whether
the indexed test is currently active(1) or inactive(2).
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1.2
mpeDevControlTestCmd
Used to start or stop the indexed test.
When read, the value returned will be the next logical command.
Enumerationr/w
Enumerated Values:
1start
2stop
 .1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1.3